// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
 * <http://rt2x00.serialmonkey.com>
 *
 * Module: eeprom_93cx6
 * Abstract: EEPROM reader routines for 93cx6 chipsets.
 * Supported chipsets: 93c46 & 93c66.
 */

#include <linux/bits.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/eeprom_93cx6.h>

MODULE_AUTHOR("http://rt2x00.serialmonkey.com");
MODULE_VERSION("1.0");
MODULE_DESCRIPTION("EEPROM 93cx6 chip driver");
MODULE_LICENSE("GPL");

static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom)
{
        eeprom->reg_data_clock = 1;
        eeprom->register_write(eeprom);

        /*
         * Add a short delay for the pulse to work.
         * According to the specifications the "maximum minimum"
         * time should be 450ns.
         */
        ndelay(450);
}

static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom)
{
        eeprom->reg_data_clock = 0;
        eeprom->register_write(eeprom);

        /*
         * Add a short delay for the pulse to work.
         * According to the specifications the "maximum minimum"
         * time should be 450ns.
         */
        ndelay(450);
}

static void eeprom_93cx6_startup(struct eeprom_93cx6 *eeprom)
{
        /*
         * Clear all flags, and enable chip select.
         */
        eeprom->register_read(eeprom);
        eeprom->reg_data_in = 0;
        eeprom->reg_data_out = 0;
        eeprom->reg_data_clock = 0;
        eeprom->reg_chip_select = 1;
        eeprom->drive_data = 1;
        eeprom->register_write(eeprom);

        /*
         * kick a pulse.
         */
        eeprom_93cx6_pulse_high(eeprom);
        eeprom_93cx6_pulse_low(eeprom);
}

static void eeprom_93cx6_cleanup(struct eeprom_93cx6 *eeprom)
{
        /*
         * Clear chip_select and data_in flags.
         */
        eeprom->register_read(eeprom);
        eeprom->reg_data_in = 0;
        eeprom->reg_chip_select = 0;
        eeprom->register_write(eeprom);

        /*
         * kick a pulse.
         */
        eeprom_93cx6_pulse_high(eeprom);
        eeprom_93cx6_pulse_low(eeprom);
}

static void eeprom_93cx6_write_bits(struct eeprom_93cx6 *eeprom,
        const u16 data, const u16 count)
{
        unsigned int i;

        eeprom->register_read(eeprom);

        /*
         * Clear data flags.
         */
        eeprom->reg_data_in = 0;
        eeprom->reg_data_out = 0;
        eeprom->drive_data = 1;

        /*
         * Start writing all bits.
         */
        for (i = count; i > 0; i--) {
                /*
                 * Check if this bit needs to be set.
                 */
                eeprom->reg_data_in = !!(data & BIT(i - 1));

                /*
                 * Write the bit to the eeprom register.
                 */
                eeprom->register_write(eeprom);

                /*
                 * Kick a pulse.
                 */
                eeprom_93cx6_pulse_high(eeprom);
                eeprom_93cx6_pulse_low(eeprom);
        }

        eeprom->reg_data_in = 0;
        eeprom->register_write(eeprom);
}

static void eeprom_93cx6_read_bits(struct eeprom_93cx6 *eeprom,
        u16 *data, const u16 count)
{
        unsigned int i;
        u16 buf = 0;

        eeprom->register_read(eeprom);

        /*
         * Clear data flags.
         */
        eeprom->reg_data_in = 0;
        eeprom->reg_data_out = 0;
        eeprom->drive_data = 0;

        /*
         * Start reading all bits.
         */
        for (i = count; i > 0; i--) {
                eeprom_93cx6_pulse_high(eeprom);

                eeprom->register_read(eeprom);

                /*
                 * Clear data_in flag.
                 */
                eeprom->reg_data_in = 0;

                /*
                 * Read if the bit has been set.
                 */
                if (eeprom->reg_data_out)
                        buf |= BIT(i - 1);

                eeprom_93cx6_pulse_low(eeprom);
        }

        *data = buf;
}

/**
 * eeprom_93cx6_read - Read a word from eeprom
 * @eeprom: Pointer to eeprom structure
 * @word: Word index from where we should start reading
 * @data: target pointer where the information will have to be stored
 *
 * This function will read the eeprom data as host-endian word
 * into the given data pointer.
 */
void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word,
        u16 *data)
{
        u16 command;

        /*
         * Initialize the eeprom register
         */
        eeprom_93cx6_startup(eeprom);

        /*
         * Select the read opcode and the word to be read.
         */
        command = (PCI_EEPROM_READ_OPCODE << eeprom->width) | word;
        eeprom_93cx6_write_bits(eeprom, command,
                PCI_EEPROM_WIDTH_OPCODE + eeprom->width);

        if (has_quirk_extra_read_cycle(eeprom)) {
                eeprom_93cx6_pulse_high(eeprom);
                eeprom_93cx6_pulse_low(eeprom);
        }

        /*
         * Read the requested 16 bits.
         */
        eeprom_93cx6_read_bits(eeprom, data, 16);

        /*
         * Cleanup eeprom register.
         */
        eeprom_93cx6_cleanup(eeprom);
}
EXPORT_SYMBOL_GPL(eeprom_93cx6_read);

/**
 * eeprom_93cx6_multiread - Read multiple words from eeprom
 * @eeprom: Pointer to eeprom structure
 * @word: Word index from where we should start reading
 * @data: target pointer where the information will have to be stored
 * @words: Number of words that should be read.
 *
 * This function will read all requested words from the eeprom,
 * this is done by calling eeprom_93cx6_read() multiple times.
 * But with the additional change that while the eeprom_93cx6_read
 * will return host ordered bytes, this method will return little
 * endian words.
 */
void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom, const u8 word,
        __le16 *data, const u16 words)
{
        unsigned int i;
        u16 tmp;

        for (i = 0; i < words; i++) {
                tmp = 0;
                eeprom_93cx6_read(eeprom, word + i, &tmp);
                data[i] = cpu_to_le16(tmp);
        }
}
EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread);

/**
 * eeprom_93cx6_readb - Read a byte from eeprom
 * @eeprom: Pointer to eeprom structure
 * @byte: Byte index from where we should start reading
 * @data: target pointer where the information will have to be stored
 *
 * This function will read a byte of the eeprom data
 * into the given data pointer.
 */
void eeprom_93cx6_readb(struct eeprom_93cx6 *eeprom, const u8 byte,
        u8 *data)
{
        u16 command;
        u16 tmp;

        /*
         * Initialize the eeprom register
         */
        eeprom_93cx6_startup(eeprom);

        /*
         * Select the read opcode and the byte to be read.
         */
        command = (PCI_EEPROM_READ_OPCODE << (eeprom->width + 1)) | byte;
        eeprom_93cx6_write_bits(eeprom, command,
                PCI_EEPROM_WIDTH_OPCODE + eeprom->width + 1);

        if (has_quirk_extra_read_cycle(eeprom)) {
                eeprom_93cx6_pulse_high(eeprom);
                eeprom_93cx6_pulse_low(eeprom);
        }

        /*
         * Read the requested 8 bits.
         */
        eeprom_93cx6_read_bits(eeprom, &tmp, 8);
        *data = tmp & 0xff;

        /*
         * Cleanup eeprom register.
         */
        eeprom_93cx6_cleanup(eeprom);
}
EXPORT_SYMBOL_GPL(eeprom_93cx6_readb);

/**
 * eeprom_93cx6_multireadb - Read multiple bytes from eeprom
 * @eeprom: Pointer to eeprom structure
 * @byte: Index from where we should start reading
 * @data: target pointer where the information will have to be stored
 * @bytes: Number of bytes that should be read.
 *
 * This function will read all requested bytes from the eeprom,
 * this is done by calling eeprom_93cx6_readb() multiple times.
 */
void eeprom_93cx6_multireadb(struct eeprom_93cx6 *eeprom, const u8 byte,
        u8 *data, const u16 bytes)
{
        unsigned int i;

        for (i = 0; i < bytes; i++)
                eeprom_93cx6_readb(eeprom, byte + i, &data[i]);
}
EXPORT_SYMBOL_GPL(eeprom_93cx6_multireadb);

/**
 * eeprom_93cx6_wren - set the write enable state
 * @eeprom: Pointer to eeprom structure
 * @enable: true to enable writes, otherwise disable writes
 *
 * Set the EEPROM write enable state to either allow or deny
 * writes depending on the @enable value.
 */
void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable)
{
        u16 command;

        /* start the command */
        eeprom_93cx6_startup(eeprom);

        /* create command to enable/disable */

        command = enable ? PCI_EEPROM_EWEN_OPCODE : PCI_EEPROM_EWDS_OPCODE;
        command <<= (eeprom->width - 2);

        eeprom_93cx6_write_bits(eeprom, command,
                                PCI_EEPROM_WIDTH_OPCODE + eeprom->width);

        eeprom_93cx6_cleanup(eeprom);
}
EXPORT_SYMBOL_GPL(eeprom_93cx6_wren);

/**
 * eeprom_93cx6_write - write data to the EEPROM
 * @eeprom: Pointer to eeprom structure
 * @addr: Address to write data to.
 * @data: The data to write to address @addr.
 *
 * Write the @data to the specified @addr in the EEPROM and
 * waiting for the device to finish writing.
 *
 * Note, since we do not expect large number of write operations
 * we delay in between parts of the operation to avoid using excessive
 * amounts of CPU time busy waiting.
 */
void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom, u8 addr, u16 data)
{
        int timeout = 100;
        u16 command;

        /* start the command */
        eeprom_93cx6_startup(eeprom);

        command = PCI_EEPROM_WRITE_OPCODE << eeprom->width;
        command |= addr;

        /* send write command */
        eeprom_93cx6_write_bits(eeprom, command,
                                PCI_EEPROM_WIDTH_OPCODE + eeprom->width);

        /* send data */
        eeprom_93cx6_write_bits(eeprom, data, 16);

        /* get ready to check for busy */
        eeprom->drive_data = 0;
        eeprom->reg_chip_select = 1;
        eeprom->register_write(eeprom);

        /* wait at-least 250ns to get DO to be the busy signal */
        usleep_range(1000, 2000);

        /* wait for DO to go high to signify finish */

        while (true) {
                eeprom->register_read(eeprom);

                if (eeprom->reg_data_out)
                        break;

                usleep_range(1000, 2000);

                if (--timeout <= 0) {
                        printk(KERN_ERR "%s: timeout\n", __func__);
                        break;
                }
        }

        eeprom_93cx6_cleanup(eeprom);
}
EXPORT_SYMBOL_GPL(eeprom_93cx6_write);