// SPDX-License-Identifier: GPL-2.0
/*
 * Tegra30 SoC Thermal Sensor driver
 *
 * Based on downstream HWMON driver from NVIDIA.
 * Copyright (C) 2011 NVIDIA Corporation
 *
 * Author: Dmitry Osipenko <digetx@gmail.com>
 * Copyright (C) 2021 GRATE-DRIVER project
 */

#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/math.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/thermal.h>
#include <linux/types.h>

#include <soc/tegra/fuse.h>

#include "../thermal_hwmon.h"

#define TSENSOR_SENSOR0_CONFIG0                         0x0
#define TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP             BIT(0)
#define TSENSOR_SENSOR0_CONFIG0_HW_FREQ_DIV_EN          BIT(1)
#define TSENSOR_SENSOR0_CONFIG0_THERMAL_RST_EN          BIT(2)
#define TSENSOR_SENSOR0_CONFIG0_DVFS_EN                 BIT(3)
#define TSENSOR_SENSOR0_CONFIG0_INTR_OVERFLOW_EN        BIT(4)
#define TSENSOR_SENSOR0_CONFIG0_INTR_HW_FREQ_DIV_EN     BIT(5)
#define TSENSOR_SENSOR0_CONFIG0_INTR_THERMAL_RST_EN     BIT(6)
#define TSENSOR_SENSOR0_CONFIG0_M                       GENMASK(23,  8)
#define TSENSOR_SENSOR0_CONFIG0_N                       GENMASK(31, 24)

#define TSENSOR_SENSOR0_CONFIG1                         0x8
#define TSENSOR_SENSOR0_CONFIG1_TH1                     GENMASK(15,  0)
#define TSENSOR_SENSOR0_CONFIG1_TH2                     GENMASK(31, 16)

#define TSENSOR_SENSOR0_CONFIG2                         0xc
#define TSENSOR_SENSOR0_CONFIG2_TH3                     GENMASK(15,  0)

#define TSENSOR_SENSOR0_STATUS0                         0x18
#define TSENSOR_SENSOR0_STATUS0_STATE                   GENMASK(2, 0)
#define TSENSOR_SENSOR0_STATUS0_INTR                    BIT(8)
#define TSENSOR_SENSOR0_STATUS0_CURRENT_VALID           BIT(9)

#define TSENSOR_SENSOR0_TS_STATUS1                      0x1c
#define TSENSOR_SENSOR0_TS_STATUS1_CURRENT_COUNT        GENMASK(31, 16)

#define TEGRA30_FUSE_TEST_PROG_VER                      0x28

#define TEGRA30_FUSE_TSENSOR_CALIB                      0x98
#define TEGRA30_FUSE_TSENSOR_CALIB_LOW                  GENMASK(15,  0)
#define TEGRA30_FUSE_TSENSOR_CALIB_HIGH                 GENMASK(31, 16)

#define TEGRA30_FUSE_SPARE_BIT                          0x144

struct tegra_tsensor;

struct tegra_tsensor_calibration_data {
        int a, b, m, n, p, r;
};

struct tegra_tsensor_channel {
        void __iomem *regs;
        unsigned int id;
        struct tegra_tsensor *ts;
        struct thermal_zone_device *tzd;
};

struct tegra_tsensor {
        void __iomem *regs;
        bool swap_channels;
        struct clk *clk;
        struct device *dev;
        struct reset_control *rst;
        struct tegra_tsensor_channel ch[2];
        struct tegra_tsensor_calibration_data calib;
};

static int tegra_tsensor_hw_enable(const struct tegra_tsensor *ts)
{
        u32 val;
        int err;

        err = reset_control_assert(ts->rst);
        if (err) {
                dev_err(ts->dev, "failed to assert hardware reset: %d\n", err);
                return err;
        }

        err = clk_prepare_enable(ts->clk);
        if (err) {
                dev_err(ts->dev, "failed to enable clock: %d\n", err);
                return err;
        }

        fsleep(1000);

        err = reset_control_deassert(ts->rst);
        if (err) {
                dev_err(ts->dev, "failed to deassert hardware reset: %d\n", err);
                goto disable_clk;
        }

        /*
         * Sensors are enabled after reset by default, but not gauging
         * until clock counter is programmed.
         *
         * M: number of reference clock pulses after which every
         *    temperature / voltage measurement is made
         *
         * N: number of reference clock counts for which the counter runs
         */
        val  = FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_M, 12500);
        val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_N, 255);

        /* apply the same configuration to both channels */
        writel_relaxed(val, ts->regs + 0x40 + TSENSOR_SENSOR0_CONFIG0);
        writel_relaxed(val, ts->regs + 0x80 + TSENSOR_SENSOR0_CONFIG0);

        return 0;

disable_clk:
        clk_disable_unprepare(ts->clk);

        return err;
}

static int tegra_tsensor_hw_disable(const struct tegra_tsensor *ts)
{
        int err;

        err = reset_control_assert(ts->rst);
        if (err) {
                dev_err(ts->dev, "failed to assert hardware reset: %d\n", err);
                return err;
        }

        clk_disable_unprepare(ts->clk);

        return 0;
}

static void devm_tegra_tsensor_hw_disable(void *data)
{
        const struct tegra_tsensor *ts = data;

        tegra_tsensor_hw_disable(ts);
}

static int tegra_tsensor_get_temp(struct thermal_zone_device *tz, int *temp)
{
        const struct tegra_tsensor_channel *tsc = thermal_zone_device_priv(tz);
        const struct tegra_tsensor *ts = tsc->ts;
        int err, c1, c2, c3, c4, counter;
        u32 val;

        /*
         * Counter will be invalid if hardware is misprogrammed or not enough
         * time passed since the time when sensor was enabled.
         */
        err = readl_relaxed_poll_timeout(tsc->regs + TSENSOR_SENSOR0_STATUS0, val,
                                         val & TSENSOR_SENSOR0_STATUS0_CURRENT_VALID,
                                         21 * USEC_PER_MSEC,
                                         21 * USEC_PER_MSEC * 50);
        if (err) {
                dev_err_once(ts->dev, "ch%u: counter invalid\n", tsc->id);
                return err;
        }

        val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_TS_STATUS1);
        counter = FIELD_GET(TSENSOR_SENSOR0_TS_STATUS1_CURRENT_COUNT, val);

        /*
         * This shouldn't happen with a valid counter status, nevertheless
         * lets verify the value since it's in a separate (from status)
         * register.
         */
        if (counter == 0xffff) {
                dev_err_once(ts->dev, "ch%u: counter overflow\n", tsc->id);
                return -EINVAL;
        }

        /*
         * temperature = a * counter + b
         * temperature = m * (temperature ^ 2) + n * temperature + p
         */
        c1 = DIV_ROUND_CLOSEST(ts->calib.a * counter + ts->calib.b, 1000000);
        c1 = c1 ?: 1;
        c2 = DIV_ROUND_CLOSEST(ts->calib.p, c1);
        c3 = c1 * ts->calib.m;
        c4 = ts->calib.n;

        *temp = DIV_ROUND_CLOSEST(c1 * (c2 + c3 + c4), 1000);

        return 0;
}

static int tegra_tsensor_temp_to_counter(const struct tegra_tsensor *ts, int temp)
{
        int c1, c2;

        c1 = DIV_ROUND_CLOSEST(ts->calib.p - temp * 1000, ts->calib.m);
        c2 = -ts->calib.r - int_sqrt(ts->calib.r * ts->calib.r - c1);

        return DIV_ROUND_CLOSEST(c2 * 1000000 - ts->calib.b, ts->calib.a);
}

static int tegra_tsensor_set_trips(struct thermal_zone_device *tz, int low, int high)
{
        const struct tegra_tsensor_channel *tsc = thermal_zone_device_priv(tz);
        const struct tegra_tsensor *ts = tsc->ts;
        u32 val;

        /*
         * TSENSOR doesn't trigger interrupt on the "low" temperature breach,
         * hence bail out if high temperature is unspecified.
         */
        if (high == INT_MAX)
                return 0;

        val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG1);
        val &= ~TSENSOR_SENSOR0_CONFIG1_TH1;

        high = tegra_tsensor_temp_to_counter(ts, high);
        val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG1_TH1, high);
        writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG1);

        return 0;
}

static const struct thermal_zone_device_ops ops = {
        .get_temp = tegra_tsensor_get_temp,
        .set_trips = tegra_tsensor_set_trips,
};

static bool
tegra_tsensor_handle_channel_interrupt(const struct tegra_tsensor *ts,
                                       unsigned int id)
{
        const struct tegra_tsensor_channel *tsc = &ts->ch[id];
        u32 val;

        val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_STATUS0);
        writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_STATUS0);

        if (FIELD_GET(TSENSOR_SENSOR0_STATUS0_STATE, val) == 5)
                dev_err_ratelimited(ts->dev, "ch%u: counter overflowed\n", id);

        if (!FIELD_GET(TSENSOR_SENSOR0_STATUS0_INTR, val))
                return false;

        thermal_zone_device_update(tsc->tzd, THERMAL_EVENT_UNSPECIFIED);

        return true;
}

static irqreturn_t tegra_tsensor_isr(int irq, void *data)
{
        const struct tegra_tsensor *ts = data;
        bool handled = false;
        unsigned int i;

        for (i = 0; i < ARRAY_SIZE(ts->ch); i++)
                handled |= tegra_tsensor_handle_channel_interrupt(ts, i);

        return handled ? IRQ_HANDLED : IRQ_NONE;
}

static int tegra_tsensor_disable_hw_channel(const struct tegra_tsensor *ts,
                                            unsigned int id)
{
        const struct tegra_tsensor_channel *tsc = &ts->ch[id];
        struct thermal_zone_device *tzd = tsc->tzd;
        u32 val;
        int err;

        if (!tzd)
                goto stop_channel;

        err = thermal_zone_device_disable(tzd);
        if (err) {
                dev_err(ts->dev, "ch%u: failed to disable zone: %d\n", id, err);
                return err;
        }

stop_channel:
        /* stop channel gracefully */
        val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG0);
        val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP, 1);
        writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG0);

        return 0;
}

struct trip_temps {
        int hot_trip;
        int crit_trip;
};

static int tegra_tsensor_get_trips_cb(struct thermal_trip *trip, void *arg)
{
        struct trip_temps *temps = arg;

        if (trip->type == THERMAL_TRIP_HOT)
                temps->hot_trip = trip->temperature;
        else if (trip->type == THERMAL_TRIP_CRITICAL)
                temps->crit_trip = trip->temperature;

        return 0;
}

static void tegra_tsensor_get_hw_channel_trips(struct thermal_zone_device *tzd,
                                               struct trip_temps *temps)
{
        /*
         * 90C is the maximal critical temperature of all Tegra30 SoC variants,
         * use it for the default trip if unspecified in a device-tree.
         */
        temps->hot_trip  = 85000;
        temps->crit_trip = 90000;

        thermal_zone_for_each_trip(tzd, tegra_tsensor_get_trips_cb, temps);

        /* clamp hardware trips to the calibration limits */
        temps->hot_trip = clamp(temps->hot_trip, 25000, 90000);

        /*
         * Kernel will perform a normal system shut down if it will
         * see that critical temperature is breached, hence set the
         * hardware limit by 5C higher in order to allow system to
         * shut down gracefully before sending signal to the Power
         * Management controller.
         */
        temps->crit_trip = clamp(temps->crit_trip + 5000, 25000, 90000);
}

static int tegra_tsensor_enable_hw_channel(const struct tegra_tsensor *ts,
                                           unsigned int id)
{
        const struct tegra_tsensor_channel *tsc = &ts->ch[id];
        struct thermal_zone_device *tzd = tsc->tzd;
        struct trip_temps temps = { 0 };
        int err;
        u32 val;

        if (!tzd) {
                val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG0);
                val &= ~TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP;
                writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG0);

                return 0;
        }

        tegra_tsensor_get_hw_channel_trips(tzd, &temps);

        dev_info_once(ts->dev, "ch%u: PMC emergency shutdown trip set to %dC\n",
                      id, DIV_ROUND_CLOSEST(temps.crit_trip, 1000));

        temps.hot_trip  = tegra_tsensor_temp_to_counter(ts, temps.hot_trip);
        temps.crit_trip = tegra_tsensor_temp_to_counter(ts, temps.crit_trip);

        /* program LEVEL2 counter threshold */
        val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG1);
        val &= ~TSENSOR_SENSOR0_CONFIG1_TH2;
        val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG1_TH2, temps.hot_trip);
        writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG1);

        /* program LEVEL3 counter threshold */
        val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG2);
        val &= ~TSENSOR_SENSOR0_CONFIG2_TH3;
        val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG2_TH3, temps.crit_trip);
        writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG2);

        /*
         * Enable sensor, emergency shutdown, interrupts for level 1/2/3
         * breaches and counter overflow condition.
         *
         * Disable DIV2 throttle for now since we need to figure out how
         * to integrate it properly with the thermal framework.
         *
         * Thermal levels supported by hardware:
         *
         *     Level 0 = cold
         *     Level 1 = passive cooling (cpufreq DVFS)
         *     Level 2 = passive cooling assisted by hardware (DIV2)
         *     Level 3 = emergency shutdown assisted by hardware (PMC)
         */
        val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG0);
        val &= ~TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP;
        val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_DVFS_EN, 1);
        val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_HW_FREQ_DIV_EN, 0);
        val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_THERMAL_RST_EN, 1);
        val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_INTR_OVERFLOW_EN, 1);
        val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_INTR_HW_FREQ_DIV_EN, 1);
        val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_INTR_THERMAL_RST_EN, 1);
        writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG0);

        err = thermal_zone_device_enable(tzd);
        if (err) {
                dev_err(ts->dev, "ch%u: failed to enable zone: %d\n", id, err);
                return err;
        }

        return 0;
}

static bool tegra_tsensor_fuse_read_spare(unsigned int spare)
{
        u32 val = 0;

        tegra_fuse_readl(TEGRA30_FUSE_SPARE_BIT + spare * 4, &val);

        return !!val;
}

static int tegra_tsensor_nvmem_setup(struct tegra_tsensor *ts)
{
        u32 i, ate_ver = 0, cal = 0, t1_25C = 0, t2_90C = 0;
        int err, c1_25C, c2_90C;

        err = tegra_fuse_readl(TEGRA30_FUSE_TEST_PROG_VER, &ate_ver);
        if (err) {
                dev_err_probe(ts->dev, err, "failed to get ATE version\n");
                return err;
        }

        if (ate_ver < 8) {
                dev_info(ts->dev, "unsupported ATE version: %u\n", ate_ver);
                return -ENODEV;
        }

        /*
         * We have two TSENSOR channels in a two different spots on SoC.
         * Second channel provides more accurate data on older SoC versions,
         * use it as a primary channel.
         */
        if (ate_ver <= 21) {
                dev_info_once(ts->dev,
                              "older ATE version detected, channels remapped\n");
                ts->swap_channels = true;
        }

        err = tegra_fuse_readl(TEGRA30_FUSE_TSENSOR_CALIB, &cal);
        if (err) {
                dev_err(ts->dev, "failed to get calibration data: %d\n", err);
                return err;
        }

        /* get calibrated counter values for 25C/90C thresholds */
        c1_25C = FIELD_GET(TEGRA30_FUSE_TSENSOR_CALIB_LOW, cal);
        c2_90C = FIELD_GET(TEGRA30_FUSE_TSENSOR_CALIB_HIGH, cal);

        /* and calibrated temperatures corresponding to the counter values */
        for (i = 0; i < 7; i++) {
                t1_25C |= tegra_tsensor_fuse_read_spare(14 + i) << i;
                t1_25C |= tegra_tsensor_fuse_read_spare(21 + i) << i;

                t2_90C |= tegra_tsensor_fuse_read_spare(0 + i) << i;
                t2_90C |= tegra_tsensor_fuse_read_spare(7 + i) << i;
        }

        if (c2_90C - c1_25C <= t2_90C - t1_25C) {
                dev_err(ts->dev, "invalid calibration data: %d %d %u %u\n",
                        c2_90C, c1_25C, t2_90C, t1_25C);
                return -EINVAL;
        }

        /* all calibration coefficients are premultiplied by 1000000 */

        ts->calib.a = DIV_ROUND_CLOSEST((t2_90C - t1_25C) * 1000000,
                                        (c2_90C - c1_25C));

        ts->calib.b = t1_25C * 1000000 - ts->calib.a * c1_25C;

        if (tegra_sku_info.revision == TEGRA_REVISION_A01) {
                ts->calib.m =     -2775;
                ts->calib.n =   1338811;
                ts->calib.p =  -7300000;
        } else {
                ts->calib.m =     -3512;
                ts->calib.n =   1528943;
                ts->calib.p = -11100000;
        }

        /* except the coefficient of a reduced quadratic equation */
        ts->calib.r = DIV_ROUND_CLOSEST(ts->calib.n, ts->calib.m * 2);

        dev_info_once(ts->dev,
                      "calibration: %d %d %u %u ATE ver: %u SoC rev: %u\n",
                      c2_90C, c1_25C, t2_90C, t1_25C, ate_ver,
                      tegra_sku_info.revision);

        return 0;
}

static int tegra_tsensor_register_channel(struct tegra_tsensor *ts,
                                          unsigned int id)
{
        struct tegra_tsensor_channel *tsc = &ts->ch[id];
        unsigned int hw_id = ts->swap_channels ? !id : id;

        tsc->ts = ts;
        tsc->id = id;
        tsc->regs = ts->regs + 0x40 * (hw_id + 1);

        tsc->tzd = devm_thermal_of_zone_register(ts->dev, id, tsc, &ops);
        if (IS_ERR(tsc->tzd)) {
                if (PTR_ERR(tsc->tzd) != -ENODEV)
                        return dev_err_probe(ts->dev, PTR_ERR(tsc->tzd),
                                             "failed to register thermal zone\n");

                /*
                 * It's okay if sensor isn't assigned to any thermal zone
                 * in a device-tree.
                 */
                tsc->tzd = NULL;
                return 0;
        }

        devm_thermal_add_hwmon_sysfs(ts->dev, tsc->tzd);

        return 0;
}

static int tegra_tsensor_probe(struct platform_device *pdev)
{
        struct tegra_tsensor *ts;
        unsigned int i;
        int err, irq;

        ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL);
        if (!ts)
                return -ENOMEM;

        irq = platform_get_irq(pdev, 0);
        if (irq < 0)
                return irq;

        ts->dev = &pdev->dev;
        platform_set_drvdata(pdev, ts);

        ts->regs = devm_platform_ioremap_resource(pdev, 0);
        if (IS_ERR(ts->regs))
                return PTR_ERR(ts->regs);

        ts->clk = devm_clk_get(&pdev->dev, NULL);
        if (IS_ERR(ts->clk))
                return dev_err_probe(&pdev->dev, PTR_ERR(ts->clk),
                                     "failed to get clock\n");

        ts->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
        if (IS_ERR(ts->rst))
                return dev_err_probe(&pdev->dev, PTR_ERR(ts->rst),
                                     "failed to get reset control\n");

        err = tegra_tsensor_nvmem_setup(ts);
        if (err)
                return err;

        err = tegra_tsensor_hw_enable(ts);
        if (err)
                return err;

        err = devm_add_action_or_reset(&pdev->dev,
                                       devm_tegra_tsensor_hw_disable,
                                       ts);
        if (err)
                return err;

        for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
                err = tegra_tsensor_register_channel(ts, i);
                if (err)
                        return err;
        }

        /*
         * Enable the channels before setting the interrupt so
         * set_trips() can not be called while we are setting up the
         * register TSENSOR_SENSOR0_CONFIG1. With this we close a
         * potential race window where we are setting up the TH2 and
         * the temperature hits TH1 resulting to an update of the
         * TSENSOR_SENSOR0_CONFIG1 register in the ISR.
         */
        for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
                err = tegra_tsensor_enable_hw_channel(ts, i);
                if (err)
                        return err;
        }

        err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
                                        tegra_tsensor_isr, IRQF_ONESHOT,
                                        "tegra_tsensor", ts);
        if (err)
                return dev_err_probe(&pdev->dev, err,
                                     "failed to request interrupt\n");

        return 0;
}

static int __maybe_unused tegra_tsensor_suspend(struct device *dev)
{
        struct tegra_tsensor *ts = dev_get_drvdata(dev);
        unsigned int i;
        int err;

        for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
                err = tegra_tsensor_disable_hw_channel(ts, i);
                if (err)
                        goto enable_channel;
        }

        err = tegra_tsensor_hw_disable(ts);
        if (err)
                goto enable_channel;

        return 0;

enable_channel:
        while (i--)
                tegra_tsensor_enable_hw_channel(ts, i);

        return err;
}

static int __maybe_unused tegra_tsensor_resume(struct device *dev)
{
        struct tegra_tsensor *ts = dev_get_drvdata(dev);
        unsigned int i;
        int err;

        err = tegra_tsensor_hw_enable(ts);
        if (err)
                return err;

        for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
                err = tegra_tsensor_enable_hw_channel(ts, i);
                if (err)
                        return err;
        }

        return 0;
}

static const struct dev_pm_ops tegra_tsensor_pm_ops = {
        SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(tegra_tsensor_suspend,
                                      tegra_tsensor_resume)
};

static const struct of_device_id tegra_tsensor_of_match[] = {
        { .compatible = "nvidia,tegra30-tsensor", },
        {},
};
MODULE_DEVICE_TABLE(of, tegra_tsensor_of_match);

static struct platform_driver tegra_tsensor_driver = {
        .probe = tegra_tsensor_probe,
        .driver = {
                .name = "tegra30-tsensor",
                .of_match_table = tegra_tsensor_of_match,
                .pm = &tegra_tsensor_pm_ops,
        },
};
module_platform_driver(tegra_tsensor_driver);

MODULE_DESCRIPTION("NVIDIA Tegra30 Thermal Sensor driver");
MODULE_AUTHOR("Dmitry Osipenko <digetx@gmail.com>");
MODULE_LICENSE("GPL");