root/drivers/iio/adc/sun4i-gpadc-iio.c
// SPDX-License-Identifier: GPL-2.0
/* ADC driver for sunxi platforms' (A10, A13 and A31) GPADC
 *
 * Copyright (c) 2016 Quentin Schulz <quentin.schulz@free-electrons.com>
 *
 * The Allwinner SoCs all have an ADC that can also act as a touchscreen
 * controller and a thermal sensor.
 * The thermal sensor works only when the ADC acts as a touchscreen controller
 * and is configured to throw an interrupt every fixed periods of time (let say
 * every X seconds).
 * One would be tempted to disable the IP on the hardware side rather than
 * disabling interrupts to save some power but that resets the internal clock of
 * the IP, resulting in having to wait X seconds every time we want to read the
 * value of the thermal sensor.
 * This is also the reason of using autosuspend in pm_runtime. If there was no
 * autosuspend, the thermal sensor would need X seconds after every
 * pm_runtime_get_sync to get a value from the ADC. The autosuspend allows the
 * thermal sensor to be requested again in a certain time span before it gets
 * shutdown for not being used.
 */

#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/thermal.h>
#include <linux/delay.h>

#include <linux/iio/iio.h>
#include <linux/iio/driver.h>
#include <linux/iio/machine.h>
#include <linux/mfd/sun4i-gpadc.h>

static unsigned int sun4i_gpadc_chan_select(unsigned int chan)
{
        return SUN4I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
}

static unsigned int sun6i_gpadc_chan_select(unsigned int chan)
{
        return SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
}

struct gpadc_data {
        int             temp_offset;
        int             temp_scale;
        unsigned int    tp_mode_en;
        unsigned int    tp_adc_select;
        unsigned int    (*adc_chan_select)(unsigned int chan);
        unsigned int    adc_chan_mask;
};

static const struct gpadc_data sun4i_gpadc_data = {
        .temp_offset = -1932,
        .temp_scale = 133,
        .tp_mode_en = SUN4I_GPADC_CTRL1_TP_MODE_EN,
        .tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
        .adc_chan_select = &sun4i_gpadc_chan_select,
        .adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
};

static const struct gpadc_data sun5i_gpadc_data = {
        .temp_offset = -1447,
        .temp_scale = 100,
        .tp_mode_en = SUN4I_GPADC_CTRL1_TP_MODE_EN,
        .tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
        .adc_chan_select = &sun4i_gpadc_chan_select,
        .adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
};

static const struct gpadc_data sun6i_gpadc_data = {
        .temp_offset = -1623,
        .temp_scale = 167,
        .tp_mode_en = SUN6I_GPADC_CTRL1_TP_MODE_EN,
        .tp_adc_select = SUN6I_GPADC_CTRL1_TP_ADC_SELECT,
        .adc_chan_select = &sun6i_gpadc_chan_select,
        .adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
};

static const struct gpadc_data sun8i_a33_gpadc_data = {
        .temp_offset = -1662,
        .temp_scale = 162,
        .tp_mode_en = SUN8I_GPADC_CTRL1_CHOP_TEMP_EN,
};

struct sun4i_gpadc_iio {
        struct iio_dev                  *indio_dev;
        struct completion               completion;
        int                             temp_data;
        u32                             adc_data;
        struct regmap                   *regmap;
        unsigned int                    fifo_data_irq;
        atomic_t                        ignore_fifo_data_irq;
        unsigned int                    temp_data_irq;
        atomic_t                        ignore_temp_data_irq;
        const struct gpadc_data         *data;
        bool                            no_irq;
        /* prevents concurrent reads of temperature and ADC */
        struct mutex                    mutex;
        struct thermal_zone_device      *tzd;
        struct device                   *sensor_device;
};

#define SUN4I_GPADC_ADC_CHANNEL(_channel, _name) {              \
        .type = IIO_VOLTAGE,                                    \
        .indexed = 1,                                           \
        .channel = _channel,                                    \
        .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),           \
        .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),   \
        .datasheet_name = _name,                                \
}

static const struct iio_map sun4i_gpadc_hwmon_maps[] = {
        IIO_MAP("temp_adc", "iio_hwmon.0", NULL),
        { }
};

static const struct iio_chan_spec sun4i_gpadc_channels[] = {
        SUN4I_GPADC_ADC_CHANNEL(0, "adc_chan0"),
        SUN4I_GPADC_ADC_CHANNEL(1, "adc_chan1"),
        SUN4I_GPADC_ADC_CHANNEL(2, "adc_chan2"),
        SUN4I_GPADC_ADC_CHANNEL(3, "adc_chan3"),
        {
                .type = IIO_TEMP,
                .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
                                      BIT(IIO_CHAN_INFO_SCALE) |
                                      BIT(IIO_CHAN_INFO_OFFSET),
                .datasheet_name = "temp_adc",
        },
};

static const struct iio_chan_spec sun4i_gpadc_channels_no_temp[] = {
        SUN4I_GPADC_ADC_CHANNEL(0, "adc_chan0"),
        SUN4I_GPADC_ADC_CHANNEL(1, "adc_chan1"),
        SUN4I_GPADC_ADC_CHANNEL(2, "adc_chan2"),
        SUN4I_GPADC_ADC_CHANNEL(3, "adc_chan3"),
};

static const struct iio_chan_spec sun8i_a33_gpadc_channels[] = {
        {
                .type = IIO_TEMP,
                .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
                                      BIT(IIO_CHAN_INFO_SCALE) |
                                      BIT(IIO_CHAN_INFO_OFFSET),
                .datasheet_name = "temp_adc",
        },
};

static const struct regmap_config sun4i_gpadc_regmap_config = {
        .reg_bits = 32,
        .val_bits = 32,
        .reg_stride = 4,
};

static int sun4i_prepare_for_irq(struct iio_dev *indio_dev, int channel,
                                 unsigned int irq)
{
        struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
        int ret;
        u32 reg;

        pm_runtime_get_sync(indio_dev->dev.parent);

        reinit_completion(&info->completion);

        ret = regmap_write(info->regmap, SUN4I_GPADC_INT_FIFOC,
                           SUN4I_GPADC_INT_FIFOC_TP_FIFO_TRIG_LEVEL(1) |
                           SUN4I_GPADC_INT_FIFOC_TP_FIFO_FLUSH);
        if (ret)
                return ret;

        ret = regmap_read(info->regmap, SUN4I_GPADC_CTRL1, &reg);
        if (ret)
                return ret;

        if (irq == info->fifo_data_irq) {
                ret = regmap_write(info->regmap, SUN4I_GPADC_CTRL1,
                                   info->data->tp_mode_en |
                                   info->data->tp_adc_select |
                                   info->data->adc_chan_select(channel));
                /*
                 * When the IP changes channel, it needs a bit of time to get
                 * correct values.
                 */
                if ((reg & info->data->adc_chan_mask) !=
                         info->data->adc_chan_select(channel))
                        mdelay(10);

        } else {
                /*
                 * The temperature sensor returns valid data only when the ADC
                 * operates in touchscreen mode.
                 */
                ret = regmap_write(info->regmap, SUN4I_GPADC_CTRL1,
                                   info->data->tp_mode_en);
        }

        if (ret)
                return ret;

        /*
         * When the IP changes mode between ADC or touchscreen, it
         * needs a bit of time to get correct values.
         */
        if ((reg & info->data->tp_adc_select) != info->data->tp_adc_select)
                mdelay(100);

        return 0;
}

static int sun4i_gpadc_read(struct iio_dev *indio_dev, int channel, int *val,
                            unsigned int irq)
{
        struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
        int ret;

        mutex_lock(&info->mutex);

        ret = sun4i_prepare_for_irq(indio_dev, channel, irq);
        if (ret)
                goto err;

        enable_irq(irq);

        /*
         * The temperature sensor throws an interruption periodically (currently
         * set at periods of ~0.6s in sun4i_gpadc_runtime_resume). A 1s delay
         * makes sure an interruption occurs in normal conditions. If it doesn't
         * occur, then there is a timeout.
         */
        if (!wait_for_completion_timeout(&info->completion,
                                         msecs_to_jiffies(1000))) {
                ret = -ETIMEDOUT;
                goto err;
        }

        if (irq == info->fifo_data_irq)
                *val = info->adc_data;
        else
                *val = info->temp_data;

        ret = 0;

err:
        pm_runtime_put_autosuspend(indio_dev->dev.parent);
        disable_irq(irq);
        mutex_unlock(&info->mutex);

        return ret;
}

static int sun4i_gpadc_adc_read(struct iio_dev *indio_dev, int channel,
                                int *val)
{
        struct sun4i_gpadc_iio *info = iio_priv(indio_dev);

        return sun4i_gpadc_read(indio_dev, channel, val, info->fifo_data_irq);
}

static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
{
        struct sun4i_gpadc_iio *info = iio_priv(indio_dev);

        if (info->no_irq) {
                pm_runtime_get_sync(indio_dev->dev.parent);

                regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, val);

                pm_runtime_put_autosuspend(indio_dev->dev.parent);

                return 0;
        }

        return sun4i_gpadc_read(indio_dev, 0, val, info->temp_data_irq);
}

static int sun4i_gpadc_temp_offset(struct iio_dev *indio_dev, int *val)
{
        struct sun4i_gpadc_iio *info = iio_priv(indio_dev);

        *val = info->data->temp_offset;

        return 0;
}

static int sun4i_gpadc_temp_scale(struct iio_dev *indio_dev, int *val)
{
        struct sun4i_gpadc_iio *info = iio_priv(indio_dev);

        *val = info->data->temp_scale;

        return 0;
}

static int sun4i_gpadc_read_raw(struct iio_dev *indio_dev,
                                struct iio_chan_spec const *chan, int *val,
                                int *val2, long mask)
{
        int ret;

        switch (mask) {
        case IIO_CHAN_INFO_OFFSET:
                ret = sun4i_gpadc_temp_offset(indio_dev, val);
                if (ret)
                        return ret;

                return IIO_VAL_INT;
        case IIO_CHAN_INFO_RAW:
                if (chan->type == IIO_VOLTAGE)
                        ret = sun4i_gpadc_adc_read(indio_dev, chan->channel,
                                                   val);
                else
                        ret = sun4i_gpadc_temp_read(indio_dev, val);

                if (ret)
                        return ret;

                return IIO_VAL_INT;
        case IIO_CHAN_INFO_SCALE:
                if (chan->type == IIO_VOLTAGE) {
                        /* 3000mV / 4096 * raw */
                        *val = 0;
                        *val2 = 732421875;
                        return IIO_VAL_INT_PLUS_NANO;
                }

                ret = sun4i_gpadc_temp_scale(indio_dev, val);
                if (ret)
                        return ret;

                return IIO_VAL_INT;
        default:
                return -EINVAL;
        }

        return -EINVAL;
}

static const struct iio_info sun4i_gpadc_iio_info = {
        .read_raw = sun4i_gpadc_read_raw,
};

static irqreturn_t sun4i_gpadc_temp_data_irq_handler(int irq, void *dev_id)
{
        struct sun4i_gpadc_iio *info = dev_id;

        if (atomic_read(&info->ignore_temp_data_irq))
                goto out;

        if (!regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, &info->temp_data))
                complete(&info->completion);

out:
        return IRQ_HANDLED;
}

static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
{
        struct sun4i_gpadc_iio *info = dev_id;

        if (atomic_read(&info->ignore_fifo_data_irq))
                goto out;

        if (!regmap_read(info->regmap, SUN4I_GPADC_DATA, &info->adc_data))
                complete(&info->completion);

out:
        return IRQ_HANDLED;
}

static int sun4i_gpadc_runtime_suspend(struct device *dev)
{
        struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));

        /* Disable the ADC on IP */
        regmap_write(info->regmap, SUN4I_GPADC_CTRL1, 0);
        /* Disable temperature sensor on IP */
        regmap_write(info->regmap, SUN4I_GPADC_TPR, 0);

        return 0;
}

static int sun4i_gpadc_runtime_resume(struct device *dev)
{
        struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));

        /* clkin = 6MHz */
        regmap_write(info->regmap, SUN4I_GPADC_CTRL0,
                     SUN4I_GPADC_CTRL0_ADC_CLK_DIVIDER(2) |
                     SUN4I_GPADC_CTRL0_FS_DIV(7) |
                     SUN4I_GPADC_CTRL0_T_ACQ(63));
        regmap_write(info->regmap, SUN4I_GPADC_CTRL1, info->data->tp_mode_en);
        regmap_write(info->regmap, SUN4I_GPADC_CTRL3,
                     SUN4I_GPADC_CTRL3_FILTER_EN |
                     SUN4I_GPADC_CTRL3_FILTER_TYPE(1));
        /* period = SUN4I_GPADC_TPR_TEMP_PERIOD * 256 * 16 / clkin; ~0.6s */
        regmap_write(info->regmap, SUN4I_GPADC_TPR,
                     SUN4I_GPADC_TPR_TEMP_ENABLE |
                     SUN4I_GPADC_TPR_TEMP_PERIOD(800));

        return 0;
}

static int sun4i_gpadc_get_temp(struct thermal_zone_device *tz, int *temp)
{
        struct sun4i_gpadc_iio *info = thermal_zone_device_priv(tz);
        int val, scale, offset;

        if (sun4i_gpadc_temp_read(info->indio_dev, &val))
                return -ETIMEDOUT;

        sun4i_gpadc_temp_scale(info->indio_dev, &scale);
        sun4i_gpadc_temp_offset(info->indio_dev, &offset);

        *temp = (val + offset) * scale;

        return 0;
}

static const struct thermal_zone_device_ops sun4i_ts_tz_ops = {
        .get_temp = &sun4i_gpadc_get_temp,
};

static const struct dev_pm_ops sun4i_gpadc_pm_ops = {
        .runtime_suspend = &sun4i_gpadc_runtime_suspend,
        .runtime_resume = &sun4i_gpadc_runtime_resume,
};

static int sun4i_irq_init(struct platform_device *pdev, const char *name,
                          irq_handler_t handler, const char *devname,
                          unsigned int *irq, atomic_t *atomic)
{
        int ret;
        struct sun4i_gpadc_dev *mfd_dev = dev_get_drvdata(pdev->dev.parent);
        struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(&pdev->dev));

        /*
         * Once the interrupt is activated, the IP continuously performs
         * conversions thus throws interrupts. The interrupt is activated right
         * after being requested but we want to control when these interrupts
         * occur thus we disable it right after being requested. However, an
         * interrupt might occur between these two instructions and we have to
         * make sure that does not happen, by using atomic flags. We set the
         * flag before requesting the interrupt and unset it right after
         * disabling the interrupt. When an interrupt occurs between these two
         * instructions, reading the atomic flag will tell us to ignore the
         * interrupt.
         */
        atomic_set(atomic, 1);

        ret = platform_get_irq_byname(pdev, name);
        if (ret < 0)
                return ret;

        ret = regmap_irq_get_virq(mfd_dev->regmap_irqc, ret);
        if (ret < 0) {
                dev_err(&pdev->dev, "failed to get virq for irq %s\n", name);
                return ret;
        }

        *irq = ret;
        ret = devm_request_any_context_irq(&pdev->dev, *irq, handler,
                                           IRQF_NO_AUTOEN,
                                           devname, info);
        if (ret < 0) {
                dev_err(&pdev->dev, "could not request %s interrupt: %d\n",
                        name, ret);
                return ret;
        }

        atomic_set(atomic, 0);

        return 0;
}

static const struct of_device_id sun4i_gpadc_of_id[] = {
        {
                .compatible = "allwinner,sun8i-a33-ths",
                .data = &sun8i_a33_gpadc_data,
        },
        { }
};

static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
                                struct iio_dev *indio_dev)
{
        struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
        void __iomem *base;
        int ret;

        info->data = of_device_get_match_data(&pdev->dev);
        if (!info->data)
                return -ENODEV;

        info->no_irq = true;
        indio_dev->num_channels = ARRAY_SIZE(sun8i_a33_gpadc_channels);
        indio_dev->channels = sun8i_a33_gpadc_channels;

        base = devm_platform_ioremap_resource(pdev, 0);
        if (IS_ERR(base))
                return PTR_ERR(base);

        info->regmap = devm_regmap_init_mmio(&pdev->dev, base,
                                             &sun4i_gpadc_regmap_config);
        if (IS_ERR(info->regmap)) {
                ret = PTR_ERR(info->regmap);
                dev_err(&pdev->dev, "failed to init regmap: %d\n", ret);
                return ret;
        }

        if (IS_ENABLED(CONFIG_THERMAL_OF))
                info->sensor_device = &pdev->dev;

        return 0;
}

static int sun4i_gpadc_probe_mfd(struct platform_device *pdev,
                                 struct iio_dev *indio_dev)
{
        struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
        struct sun4i_gpadc_dev *sun4i_gpadc_dev =
                dev_get_drvdata(pdev->dev.parent);
        int ret;

        info->no_irq = false;
        info->regmap = sun4i_gpadc_dev->regmap;

        indio_dev->num_channels = ARRAY_SIZE(sun4i_gpadc_channels);
        indio_dev->channels = sun4i_gpadc_channels;

        info->data = (struct gpadc_data *)platform_get_device_id(pdev)->driver_data;

        /*
         * Since the controller needs to be in touchscreen mode for its thermal
         * sensor to operate properly, and that switching between the two modes
         * needs a delay, always registering in the thermal framework will
         * significantly slow down the conversion rate of the ADCs.
         *
         * Therefore, instead of depending on THERMAL_OF in Kconfig, we only
         * register the sensor if that option is enabled, eventually leaving
         * that choice to the user.
         */

        if (IS_ENABLED(CONFIG_THERMAL_OF)) {
                /*
                 * This driver is a child of an MFD which has a node in the DT
                 * but not its children, because of DT backward compatibility
                 * for A10, A13 and A31 SoCs. Therefore, the resulting devices
                 * of this driver do not have an of_node variable.
                 * However, its parent (the MFD driver) has an of_node variable
                 * and since devm_thermal_zone_of_sensor_register uses its first
                 * argument to match the phandle defined in the node of the
                 * thermal driver with the of_node of the device passed as first
                 * argument and the third argument to call ops from
                 * thermal_zone_of_device_ops, the solution is to use the parent
                 * device as first argument to match the phandle with its
                 * of_node, and the device from this driver as third argument to
                 * return the temperature.
                 */
                info->sensor_device = pdev->dev.parent;
        } else {
                indio_dev->num_channels =
                        ARRAY_SIZE(sun4i_gpadc_channels_no_temp);
                indio_dev->channels = sun4i_gpadc_channels_no_temp;
        }

        if (IS_ENABLED(CONFIG_THERMAL_OF)) {
                ret = sun4i_irq_init(pdev, "TEMP_DATA_PENDING",
                                     sun4i_gpadc_temp_data_irq_handler,
                                     "temp_data", &info->temp_data_irq,
                                     &info->ignore_temp_data_irq);
                if (ret < 0)
                        return ret;
        }

        ret = sun4i_irq_init(pdev, "FIFO_DATA_PENDING",
                             sun4i_gpadc_fifo_data_irq_handler, "fifo_data",
                             &info->fifo_data_irq, &info->ignore_fifo_data_irq);
        if (ret < 0)
                return ret;

        if (IS_ENABLED(CONFIG_THERMAL_OF)) {
                ret = iio_map_array_register(indio_dev, sun4i_gpadc_hwmon_maps);
                if (ret < 0) {
                        dev_err(&pdev->dev,
                                "failed to register iio map array\n");
                        return ret;
                }
        }

        return 0;
}

static int sun4i_gpadc_probe(struct platform_device *pdev)
{
        struct sun4i_gpadc_iio *info;
        struct iio_dev *indio_dev;
        int ret;

        indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
        if (!indio_dev)
                return -ENOMEM;

        info = iio_priv(indio_dev);
        platform_set_drvdata(pdev, indio_dev);

        mutex_init(&info->mutex);
        info->indio_dev = indio_dev;
        init_completion(&info->completion);
        indio_dev->name = dev_name(&pdev->dev);
        indio_dev->info = &sun4i_gpadc_iio_info;
        indio_dev->modes = INDIO_DIRECT_MODE;

        if (pdev->dev.of_node)
                ret = sun4i_gpadc_probe_dt(pdev, indio_dev);
        else
                ret = sun4i_gpadc_probe_mfd(pdev, indio_dev);

        if (ret)
                return ret;

        pm_runtime_set_autosuspend_delay(&pdev->dev,
                                         SUN4I_GPADC_AUTOSUSPEND_DELAY);
        pm_runtime_use_autosuspend(&pdev->dev);
        pm_runtime_set_suspended(&pdev->dev);
        pm_runtime_enable(&pdev->dev);

        if (IS_ENABLED(CONFIG_THERMAL_OF)) {
                info->tzd = devm_thermal_of_zone_register(info->sensor_device,
                                                          0, info,
                                                          &sun4i_ts_tz_ops);
                /*
                 * Do not fail driver probing when failing to register in
                 * thermal because no thermal DT node is found.
                 */
                if (IS_ERR(info->tzd) && PTR_ERR(info->tzd) != -ENODEV) {
                        dev_err(&pdev->dev,
                                "could not register thermal sensor: %ld\n",
                                PTR_ERR(info->tzd));
                        return PTR_ERR(info->tzd);
                }
        }

        ret = devm_iio_device_register(&pdev->dev, indio_dev);
        if (ret < 0) {
                dev_err(&pdev->dev, "could not register the device\n");
                goto err_map;
        }

        return 0;

err_map:
        if (!info->no_irq && IS_ENABLED(CONFIG_THERMAL_OF))
                iio_map_array_unregister(indio_dev);

        pm_runtime_put(&pdev->dev);
        pm_runtime_disable(&pdev->dev);

        return ret;
}

static void sun4i_gpadc_remove(struct platform_device *pdev)
{
        struct iio_dev *indio_dev = platform_get_drvdata(pdev);
        struct sun4i_gpadc_iio *info = iio_priv(indio_dev);

        pm_runtime_put(&pdev->dev);
        pm_runtime_disable(&pdev->dev);

        if (!IS_ENABLED(CONFIG_THERMAL_OF))
                return;

        if (!info->no_irq)
                iio_map_array_unregister(indio_dev);
}

static const struct platform_device_id sun4i_gpadc_id[] = {
        { .name = "sun4i-a10-gpadc-iio", .driver_data = (kernel_ulong_t)&sun4i_gpadc_data },
        { .name = "sun5i-a13-gpadc-iio", .driver_data = (kernel_ulong_t)&sun5i_gpadc_data },
        { .name = "sun6i-a31-gpadc-iio", .driver_data = (kernel_ulong_t)&sun6i_gpadc_data },
        { }
};
MODULE_DEVICE_TABLE(platform, sun4i_gpadc_id);

static struct platform_driver sun4i_gpadc_driver = {
        .driver = {
                .name = "sun4i-gpadc-iio",
                .of_match_table = sun4i_gpadc_of_id,
                .pm = &sun4i_gpadc_pm_ops,
        },
        .id_table = sun4i_gpadc_id,
        .probe = sun4i_gpadc_probe,
        .remove = sun4i_gpadc_remove,
};
MODULE_DEVICE_TABLE(of, sun4i_gpadc_of_id);

module_platform_driver(sun4i_gpadc_driver);

MODULE_DESCRIPTION("ADC driver for sunxi platforms");
MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
MODULE_LICENSE("GPL v2");