/*
 * Support for configuration of IO Delay module found on Texas Instruments SoCs
 * such as DRA7
 *
 * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com/
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2. This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/seq_file.h>
#include <linux/slab.h>

#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinctrl.h>

#include "../core.h"
#include "../devicetree.h"

#define DRIVER_NAME     "ti-iodelay"

/**
 * struct ti_iodelay_reg_data - Describes the registers for the iodelay instance
 * @signature_mask: CONFIG_REG mask for the signature bits (see TRM)
 * @signature_value: CONFIG_REG signature value to be written (see TRM)
 * @lock_mask: CONFIG_REG mask for the lock bits (see TRM)
 * @lock_val: CONFIG_REG lock value for the lock bits (see TRM)
 * @unlock_val:CONFIG_REG unlock value for the lock bits (see TRM)
 * @binary_data_coarse_mask: CONFIG_REG coarse mask (see TRM)
 * @binary_data_fine_mask: CONFIG_REG fine mask (see TRM)
 * @reg_refclk_offset: Refclk register offset
 * @refclk_period_mask: Refclk mask
 * @reg_coarse_offset: Coarse register configuration offset
 * @coarse_delay_count_mask: Coarse delay count mask
 * @coarse_ref_count_mask: Coarse ref count mask
 * @reg_fine_offset: Fine register configuration offset
 * @fine_delay_count_mask: Fine delay count mask
 * @fine_ref_count_mask: Fine ref count mask
 * @reg_global_lock_offset: Global iodelay module lock register offset
 * @global_lock_mask: Lock mask
 * @global_unlock_val: Unlock value
 * @global_lock_val: Lock value
 * @reg_start_offset: Offset to iodelay registers after the CONFIG_REG_0 to 8
 * @reg_nr_per_pin: Number of iodelay registers for each pin
 * @regmap_config: Regmap configuration for the IODelay region
 */
struct ti_iodelay_reg_data {
        u32 signature_mask;
        u32 signature_value;
        u32 lock_mask;
        u32 lock_val;
        u32 unlock_val;
        u32 binary_data_coarse_mask;
        u32 binary_data_fine_mask;

        u32 reg_refclk_offset;
        u32 refclk_period_mask;

        u32 reg_coarse_offset;
        u32 coarse_delay_count_mask;
        u32 coarse_ref_count_mask;

        u32 reg_fine_offset;
        u32 fine_delay_count_mask;
        u32 fine_ref_count_mask;

        u32 reg_global_lock_offset;
        u32 global_lock_mask;
        u32 global_unlock_val;
        u32 global_lock_val;

        u32 reg_start_offset;
        u32 reg_nr_per_pin;

        const struct regmap_config *regmap_config;
};

/**
 * struct ti_iodelay_reg_values - Computed io_reg configuration values (see TRM)
 * @coarse_ref_count: Coarse reference count
 * @coarse_delay_count: Coarse delay count
 * @fine_ref_count: Fine reference count
 * @fine_delay_count: Fine Delay count
 * @ref_clk_period: Reference Clock period
 * @cdpe: Coarse delay parameter
 * @fdpe: Fine delay parameter
 */
struct ti_iodelay_reg_values {
        u16 coarse_ref_count;
        u16 coarse_delay_count;

        u16 fine_ref_count;
        u16 fine_delay_count;

        u16 ref_clk_period;

        u32 cdpe;
        u32 fdpe;
};

/**
 * struct ti_iodelay_cfg - Description of each configuration parameters
 * @offset: Configuration register offset
 * @a_delay: Agnostic Delay (in ps)
 * @g_delay: Gnostic Delay (in ps)
 */
struct ti_iodelay_cfg {
        u16 offset;
        u16 a_delay;
        u16 g_delay;
};

/**
 * struct ti_iodelay_pingroup - Structure that describes one group
 * @cfg: configuration array for the pin (from dt)
 * @ncfg: number of configuration values allocated
 * @config: pinconf "Config" - currently a dummy value
 */
struct ti_iodelay_pingroup {
        struct ti_iodelay_cfg *cfg;
        int ncfg;
        unsigned long config;
};

/**
 * struct ti_iodelay_device - Represents information for a iodelay instance
 * @dev: Device pointer
 * @phys_base: Physical address base of the iodelay device
 * @reg_base: Virtual address base of the iodelay device
 * @regmap: Regmap for this iodelay instance
 * @pctl: Pinctrl device
 * @desc: pinctrl descriptor for pctl
 * @pa: pinctrl pin wise description
 * @reg_data: Register definition data for the IODelay instance
 * @reg_init_conf_values: Initial configuration values.
 */
struct ti_iodelay_device {
        struct device *dev;
        unsigned long phys_base;
        void __iomem *reg_base;
        struct regmap *regmap;

        struct pinctrl_dev *pctl;
        struct pinctrl_desc desc;
        struct pinctrl_pin_desc *pa;

        const struct ti_iodelay_reg_data *reg_data;
        struct ti_iodelay_reg_values reg_init_conf_values;
};

/**
 * ti_iodelay_extract() - extract bits for a field
 * @val: Register value
 * @mask: Mask
 *
 * Return: extracted value which is appropriately shifted
 */
static inline u32 ti_iodelay_extract(u32 val, u32 mask)
{
        return (val & mask) >> __ffs(mask);
}

/**
 * ti_iodelay_compute_dpe() - Compute equation for delay parameter
 * @period: Period to use
 * @ref: Reference Count
 * @delay: Delay count
 * @delay_m: Delay multiplier
 *
 * Return: Computed delay parameter
 */
static inline u32 ti_iodelay_compute_dpe(u16 period, u16 ref, u16 delay,
                                         u16 delay_m)
{
        u64 m, d;

        /* Handle overflow conditions */
        m = 10 * (u64)period * (u64)ref;
        d = 2 * (u64)delay * (u64)delay_m;

        /* Truncate result back to 32 bits */
        return div64_u64(m, d);
}

/**
 * ti_iodelay_pinconf_set() - Configure the pin configuration
 * @iod: iodelay device
 * @cfg: Configuration
 *
 * Update the configuration register as per TRM and lockup once done.
 * *IMPORTANT NOTE* SoC TRM does recommend doing iodelay programmation only
 * while in Isolation. But, then, isolation also implies that every pin
 * on the SoC (including DDR) will be isolated out. The only benefit being
 * a glitchless configuration, However, the intent of this driver is purely
 * to support a "glitchy" configuration where applicable.
 *
 * Return: 0 in case of success, else appropriate error value
 */
static int ti_iodelay_pinconf_set(struct ti_iodelay_device *iod,
                                  struct ti_iodelay_cfg *cfg)
{
        const struct ti_iodelay_reg_data *reg = iod->reg_data;
        struct ti_iodelay_reg_values *ival = &iod->reg_init_conf_values;
        struct device *dev = iod->dev;
        u32 g_delay_coarse, g_delay_fine;
        u32 a_delay_coarse, a_delay_fine;
        u32 c_elements, f_elements;
        u32 total_delay;
        u32 reg_mask, reg_val, tmp_val;
        int r;

        /* NOTE: Truncation is expected in all division below */
        g_delay_coarse = cfg->g_delay / 920;
        g_delay_fine = ((cfg->g_delay % 920) * 10) / 60;

        a_delay_coarse = cfg->a_delay / ival->cdpe;
        a_delay_fine = ((cfg->a_delay % ival->cdpe) * 10) / ival->fdpe;

        c_elements = g_delay_coarse + a_delay_coarse;
        f_elements = (g_delay_fine + a_delay_fine) / 10;

        if (f_elements > 22) {
                total_delay = c_elements * ival->cdpe + f_elements * ival->fdpe;
                c_elements = total_delay / ival->cdpe;
                f_elements = (total_delay % ival->cdpe) / ival->fdpe;
        }

        reg_mask = reg->signature_mask;
        reg_val = reg->signature_value << __ffs(reg->signature_mask);

        reg_mask |= reg->binary_data_coarse_mask;
        tmp_val = c_elements << __ffs(reg->binary_data_coarse_mask);
        if (tmp_val & ~reg->binary_data_coarse_mask) {
                dev_err(dev, "Masking overflow of coarse elements %08x\n",
                        tmp_val);
                tmp_val &= reg->binary_data_coarse_mask;
        }
        reg_val |= tmp_val;

        reg_mask |= reg->binary_data_fine_mask;
        tmp_val = f_elements << __ffs(reg->binary_data_fine_mask);
        if (tmp_val & ~reg->binary_data_fine_mask) {
                dev_err(dev, "Masking overflow of fine elements %08x\n",
                        tmp_val);
                tmp_val &= reg->binary_data_fine_mask;
        }
        reg_val |= tmp_val;

        /*
         * NOTE: we leave the iodelay values unlocked - this is to work around
         * situations such as those found with mmc mode change.
         * However, this leaves open any unwarranted changes to padconf register
         * impacting iodelay configuration. Use with care!
         */
        reg_mask |= reg->lock_mask;
        reg_val |= reg->unlock_val << __ffs(reg->lock_mask);
        r = regmap_update_bits(iod->regmap, cfg->offset, reg_mask, reg_val);

        dev_dbg(dev, "Set reg 0x%x Delay(a: %d g: %d), Elements(C=%d F=%d)0x%x\n",
                cfg->offset, cfg->a_delay, cfg->g_delay, c_elements,
                f_elements, reg_val);

        return r;
}

/**
 * ti_iodelay_pinconf_deinit_dev() - deinit the iodelay device
 * @data:       IODelay device
 *
 * Deinitialize the IODelay device (basically just lock the region back up.
 */
static void ti_iodelay_pinconf_deinit_dev(void *data)
{
        struct ti_iodelay_device *iod = data;
        const struct ti_iodelay_reg_data *reg = iod->reg_data;

        /* lock the iodelay region back again */
        regmap_update_bits(iod->regmap, reg->reg_global_lock_offset,
                           reg->global_lock_mask, reg->global_lock_val);
}

/**
 * ti_iodelay_pinconf_init_dev() - Initialize IODelay device
 * @iod: iodelay device
 *
 * Unlocks the iodelay region, computes the common parameters
 *
 * Return: 0 in case of success, else appropriate error value
 */
static int ti_iodelay_pinconf_init_dev(struct ti_iodelay_device *iod)
{
        const struct ti_iodelay_reg_data *reg = iod->reg_data;
        struct device *dev = iod->dev;
        struct ti_iodelay_reg_values *ival = &iod->reg_init_conf_values;
        u32 val;
        int r;

        /* unlock the iodelay region */
        r = regmap_update_bits(iod->regmap, reg->reg_global_lock_offset,
                               reg->global_lock_mask, reg->global_unlock_val);
        if (r)
                return r;

        r = devm_add_action_or_reset(iod->dev, ti_iodelay_pinconf_deinit_dev,
                                     iod);
        if (r)
                return r;

        /* Read up Recalibration sequence done by bootloader */
        r = regmap_read(iod->regmap, reg->reg_refclk_offset, &val);
        if (r)
                return r;
        ival->ref_clk_period = ti_iodelay_extract(val, reg->refclk_period_mask);
        dev_dbg(dev, "refclk_period=0x%04x\n", ival->ref_clk_period);

        r = regmap_read(iod->regmap, reg->reg_coarse_offset, &val);
        if (r)
                return r;
        ival->coarse_ref_count =
            ti_iodelay_extract(val, reg->coarse_ref_count_mask);
        ival->coarse_delay_count =
            ti_iodelay_extract(val, reg->coarse_delay_count_mask);
        if (!ival->coarse_delay_count) {
                dev_err(dev, "Invalid Coarse delay count (0) (reg=0x%08x)\n",
                        val);
                return -EINVAL;
        }
        ival->cdpe = ti_iodelay_compute_dpe(ival->ref_clk_period,
                                            ival->coarse_ref_count,
                                            ival->coarse_delay_count, 88);
        if (!ival->cdpe) {
                dev_err(dev, "Invalid cdpe computed params = %d %d %d\n",
                        ival->ref_clk_period, ival->coarse_ref_count,
                        ival->coarse_delay_count);
                return -EINVAL;
        }
        dev_dbg(iod->dev, "coarse: ref=0x%04x delay=0x%04x cdpe=0x%08x\n",
                ival->coarse_ref_count, ival->coarse_delay_count, ival->cdpe);

        r = regmap_read(iod->regmap, reg->reg_fine_offset, &val);
        if (r)
                return r;
        ival->fine_ref_count =
            ti_iodelay_extract(val, reg->fine_ref_count_mask);
        ival->fine_delay_count =
            ti_iodelay_extract(val, reg->fine_delay_count_mask);
        if (!ival->fine_delay_count) {
                dev_err(dev, "Invalid Fine delay count (0) (reg=0x%08x)\n",
                        val);
                return -EINVAL;
        }
        ival->fdpe = ti_iodelay_compute_dpe(ival->ref_clk_period,
                                            ival->fine_ref_count,
                                            ival->fine_delay_count, 264);
        if (!ival->fdpe) {
                dev_err(dev, "Invalid fdpe(0) computed params = %d %d %d\n",
                        ival->ref_clk_period, ival->fine_ref_count,
                        ival->fine_delay_count);
                return -EINVAL;
        }
        dev_dbg(iod->dev, "fine: ref=0x%04x delay=0x%04x fdpe=0x%08x\n",
                ival->fine_ref_count, ival->fine_delay_count, ival->fdpe);

        return 0;
}

/**
 * ti_iodelay_get_pingroup() - Find the group mapped by a group selector
 * @iod: iodelay device
 * @selector: Group Selector
 *
 * Return: Corresponding group representing group selector
 */
static struct ti_iodelay_pingroup *
ti_iodelay_get_pingroup(struct ti_iodelay_device *iod, unsigned int selector)
{
        struct group_desc *g;

        g = pinctrl_generic_get_group(iod->pctl, selector);
        if (!g) {
                dev_err(iod->dev, "%s could not find pingroup %i\n", __func__,
                        selector);

                return NULL;
        }

        return g->data;
}

/**
 * ti_iodelay_offset_to_pin() - get a pin index based on the register offset
 * @iod: iodelay driver instance
 * @offset: register offset from the base
 */
static int ti_iodelay_offset_to_pin(struct ti_iodelay_device *iod,
                                    unsigned int offset)
{
        const struct ti_iodelay_reg_data *r = iod->reg_data;
        unsigned int index;

        if (offset > r->regmap_config->max_register) {
                dev_err(iod->dev, "mux offset out of range: 0x%x (0x%x)\n",
                        offset, r->regmap_config->max_register);
                return -EINVAL;
        }

        index = (offset - r->reg_start_offset) / r->regmap_config->reg_stride;
        index /= r->reg_nr_per_pin;

        return index;
}

/**
 * ti_iodelay_node_iterator() - Iterate iodelay node
 * @pctldev: Pin controller driver
 * @np: Device node
 * @pinctrl_spec: Parsed arguments from device tree
 * @pins: Array of pins in the pin group
 * @pin_index: Pin index in the pin array
 * @data: Pin controller driver specific data
 *
 */
static int ti_iodelay_node_iterator(struct pinctrl_dev *pctldev,
                                    struct device_node *np,
                                    const struct of_phandle_args *pinctrl_spec,
                                    int *pins, int pin_index, void *data)
{
        struct ti_iodelay_device *iod;
        struct ti_iodelay_cfg *cfg = data;
        const struct ti_iodelay_reg_data *r;
        struct pinctrl_pin_desc *pd;
        int pin;

        iod = pinctrl_dev_get_drvdata(pctldev);
        if (!iod)
                return -EINVAL;

        r = iod->reg_data;

        if (pinctrl_spec->args_count < r->reg_nr_per_pin) {
                dev_err(iod->dev, "invalid args_count for spec: %i\n",
                        pinctrl_spec->args_count);

                return -EINVAL;
        }

        /* Index plus two value cells */
        cfg[pin_index].offset = pinctrl_spec->args[0];
        cfg[pin_index].a_delay = pinctrl_spec->args[1] & 0xffff;
        cfg[pin_index].g_delay = pinctrl_spec->args[2] & 0xffff;

        pin = ti_iodelay_offset_to_pin(iod, cfg[pin_index].offset);
        if (pin < 0) {
                dev_err(iod->dev, "could not add functions for %pOFn %ux\n",
                        np, cfg[pin_index].offset);
                return -ENODEV;
        }
        pins[pin_index] = pin;

        pd = &iod->pa[pin];
        pd->drv_data = &cfg[pin_index];

        dev_dbg(iod->dev, "%pOFn offset=%x a_delay = %d g_delay = %d\n",
                np, cfg[pin_index].offset, cfg[pin_index].a_delay,
                cfg[pin_index].g_delay);

        return 0;
}

/**
 * ti_iodelay_dt_node_to_map() - Map a device tree node to appropriate group
 * @pctldev: pinctrl device representing IODelay device
 * @np: Node Pointer (device tree)
 * @map: Pinctrl Map returned back to pinctrl framework
 * @num_maps: Number of maps (1)
 *
 * Maps the device tree description into a group of configuration parameters
 * for iodelay block entry.
 *
 * Return: 0 in case of success, else appropriate error value
 */
static int ti_iodelay_dt_node_to_map(struct pinctrl_dev *pctldev,
                                     struct device_node *np,
                                     struct pinctrl_map **map,
                                     unsigned int *num_maps)
{
        struct ti_iodelay_device *iod;
        struct ti_iodelay_cfg *cfg;
        struct ti_iodelay_pingroup *g;
        const char *name = "pinctrl-pin-array";
        int rows, *pins, error = -EINVAL, i;

        iod = pinctrl_dev_get_drvdata(pctldev);
        if (!iod)
                return -EINVAL;

        rows = pinctrl_count_index_with_args(np, name);
        if (rows < 0)
                return rows;

        *map = devm_kzalloc(iod->dev, sizeof(**map), GFP_KERNEL);
        if (!*map)
                return -ENOMEM;
        *num_maps = 0;

        g = devm_kzalloc(iod->dev, sizeof(*g), GFP_KERNEL);
        if (!g) {
                error = -ENOMEM;
                goto free_map;
        }

        pins = devm_kcalloc(iod->dev, rows, sizeof(*pins), GFP_KERNEL);
        if (!pins) {
                error = -ENOMEM;
                goto free_group;
        }

        cfg = devm_kcalloc(iod->dev, rows, sizeof(*cfg), GFP_KERNEL);
        if (!cfg) {
                error = -ENOMEM;
                goto free_pins;
        }

        for (i = 0; i < rows; i++) {
                struct of_phandle_args pinctrl_spec;

                error = pinctrl_parse_index_with_args(np, name, i,
                                                      &pinctrl_spec);
                if (error)
                        goto free_data;

                error = ti_iodelay_node_iterator(pctldev, np, &pinctrl_spec,
                                                 pins, i, cfg);
                if (error)
                        goto free_data;
        }

        g->cfg = cfg;
        g->ncfg = i;
        g->config = PIN_CONFIG_END;

        error = pinctrl_generic_add_group(iod->pctl, np->name, pins, i, g);
        if (error < 0)
                goto free_data;

        (*map)->type = PIN_MAP_TYPE_CONFIGS_GROUP;
        (*map)->data.configs.group_or_pin = np->name;
        (*map)->data.configs.configs = &g->config;
        (*map)->data.configs.num_configs = 1;
        *num_maps = 1;

        return 0;

free_data:
        devm_kfree(iod->dev, cfg);
free_pins:
        devm_kfree(iod->dev, pins);
free_group:
        devm_kfree(iod->dev, g);
free_map:
        devm_kfree(iod->dev, *map);

        return error;
}

/**
 * ti_iodelay_pinconf_group_get() - Get the group configuration
 * @pctldev: pinctrl device representing IODelay device
 * @selector: Group selector
 * @config: Configuration returned
 *
 * Return: The configuration if the group is valid, else returns -EINVAL
 */
static int ti_iodelay_pinconf_group_get(struct pinctrl_dev *pctldev,
                                        unsigned int selector,
                                        unsigned long *config)
{
        struct ti_iodelay_device *iod;
        struct ti_iodelay_pingroup *group;

        iod = pinctrl_dev_get_drvdata(pctldev);
        group = ti_iodelay_get_pingroup(iod, selector);

        if (!group)
                return -EINVAL;

        *config = group->config;
        return 0;
}

/**
 * ti_iodelay_pinconf_group_set() - Configure the groups of pins
 * @pctldev: pinctrl device representing IODelay device
 * @selector: Group selector
 * @configs: Configurations
 * @num_configs: Number of configurations
 *
 * Return: 0 if all went fine, else appropriate error value.
 */
static int ti_iodelay_pinconf_group_set(struct pinctrl_dev *pctldev,
                                        unsigned int selector,
                                        unsigned long *configs,
                                        unsigned int num_configs)
{
        struct ti_iodelay_device *iod;
        struct device *dev;
        struct ti_iodelay_pingroup *group;
        int i;

        iod = pinctrl_dev_get_drvdata(pctldev);
        dev = iod->dev;
        group = ti_iodelay_get_pingroup(iod, selector);

        if (num_configs != 1) {
                dev_err(dev, "Unsupported number of configurations %d\n",
                        num_configs);
                return -EINVAL;
        }

        if (*configs != PIN_CONFIG_END) {
                dev_err(dev, "Unsupported configuration\n");
                return -EINVAL;
        }

        for (i = 0; i < group->ncfg; i++) {
                if (ti_iodelay_pinconf_set(iod, &group->cfg[i]))
                        return -ENOTSUPP;
        }

        return 0;
}

#ifdef CONFIG_DEBUG_FS
/**
 * ti_iodelay_pin_to_offset() - get pin register offset based on the pin index
 * @iod: iodelay driver instance
 * @selector: Pin index
 */
static unsigned int ti_iodelay_pin_to_offset(struct ti_iodelay_device *iod,
                                             unsigned int selector)
{
        const struct ti_iodelay_reg_data *r = iod->reg_data;
        unsigned int offset;

        offset = selector * r->regmap_config->reg_stride;
        offset *= r->reg_nr_per_pin;
        offset += r->reg_start_offset;

        return offset;
}

static void ti_iodelay_pin_dbg_show(struct pinctrl_dev *pctldev,
                                    struct seq_file *s,
                                    unsigned int pin)
{
        struct ti_iodelay_device *iod;
        struct pinctrl_pin_desc *pd;
        struct ti_iodelay_cfg *cfg;
        const struct ti_iodelay_reg_data *r;
        unsigned long offset;
        u32 in, oen, out;

        iod = pinctrl_dev_get_drvdata(pctldev);
        r = iod->reg_data;

        offset = ti_iodelay_pin_to_offset(iod, pin);
        pd = &iod->pa[pin];
        cfg = pd->drv_data;

        regmap_read(iod->regmap, offset, &in);
        regmap_read(iod->regmap, offset + r->regmap_config->reg_stride, &oen);
        regmap_read(iod->regmap, offset + r->regmap_config->reg_stride * 2,
                    &out);

        seq_printf(s, "%lx a: %i g: %i (%08x %08x %08x) %s ",
                   iod->phys_base + offset,
                   cfg ? cfg->a_delay : -1,
                   cfg ? cfg->g_delay : -1,
                   in, oen, out, DRIVER_NAME);
}

/**
 * ti_iodelay_pinconf_group_dbg_show() - show the group information
 * @pctldev: Show the group information
 * @s: Sequence file
 * @selector: Group selector
 *
 * Provide the configuration information of the selected group
 */
static void ti_iodelay_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
                                              struct seq_file *s,
                                              unsigned int selector)
{
        struct ti_iodelay_device *iod;
        struct ti_iodelay_pingroup *group;
        int i;

        iod = pinctrl_dev_get_drvdata(pctldev);
        group = ti_iodelay_get_pingroup(iod, selector);
        if (!group)
                return;

        for (i = 0; i < group->ncfg; i++) {
                struct ti_iodelay_cfg *cfg;
                u32 reg = 0;

                cfg = &group->cfg[i];
                regmap_read(iod->regmap, cfg->offset, &reg);
                seq_printf(s, "\n\t0x%08x = 0x%08x (%3d, %3d)",
                        cfg->offset, reg, cfg->a_delay, cfg->g_delay);
        }
}
#endif

static const struct pinctrl_ops ti_iodelay_pinctrl_ops = {
        .get_groups_count = pinctrl_generic_get_group_count,
        .get_group_name = pinctrl_generic_get_group_name,
        .get_group_pins = pinctrl_generic_get_group_pins,
#ifdef CONFIG_DEBUG_FS
        .pin_dbg_show = ti_iodelay_pin_dbg_show,
#endif
        .dt_node_to_map = ti_iodelay_dt_node_to_map,
};

static const struct pinconf_ops ti_iodelay_pinctrl_pinconf_ops = {
        .pin_config_group_get = ti_iodelay_pinconf_group_get,
        .pin_config_group_set = ti_iodelay_pinconf_group_set,
#ifdef CONFIG_DEBUG_FS
        .pin_config_group_dbg_show = ti_iodelay_pinconf_group_dbg_show,
#endif
};

/**
 * ti_iodelay_alloc_pins() - Allocate structures needed for pins for iodelay
 * @dev: Device pointer
 * @iod: iodelay device
 * @base_phy: Base Physical Address
 *
 * Return: 0 if all went fine, else appropriate error value.
 */
static int ti_iodelay_alloc_pins(struct device *dev,
                                 struct ti_iodelay_device *iod, u32 base_phy)
{
        const struct ti_iodelay_reg_data *r = iod->reg_data;
        struct pinctrl_pin_desc *pin;
        u32 phy_reg;
        int nr_pins, i;

        nr_pins = ti_iodelay_offset_to_pin(iod, r->regmap_config->max_register);
        dev_dbg(dev, "Allocating %i pins\n", nr_pins);

        iod->pa = devm_kcalloc(dev, nr_pins, sizeof(*iod->pa), GFP_KERNEL);
        if (!iod->pa)
                return -ENOMEM;

        iod->desc.pins = iod->pa;
        iod->desc.npins = nr_pins;

        phy_reg = r->reg_start_offset + base_phy;

        for (i = 0; i < nr_pins; i++, phy_reg += 4) {
                pin = &iod->pa[i];
                pin->number = i;
        }

        return 0;
}

static const struct regmap_config dra7_iodelay_regmap_config = {
        .reg_bits = 32,
        .reg_stride = 4,
        .val_bits = 32,
        .max_register = 0xd1c,
};

static const struct ti_iodelay_reg_data dra7_iodelay_data = {
        .signature_mask = 0x0003f000,
        .signature_value = 0x29,
        .lock_mask = 0x00000400,
        .lock_val = 1,
        .unlock_val = 0,
        .binary_data_coarse_mask = 0x000003e0,
        .binary_data_fine_mask = 0x0000001f,

        .reg_refclk_offset = 0x14,
        .refclk_period_mask = 0xffff,

        .reg_coarse_offset = 0x18,
        .coarse_delay_count_mask = 0xffff0000,
        .coarse_ref_count_mask = 0x0000ffff,

        .reg_fine_offset = 0x1C,
        .fine_delay_count_mask = 0xffff0000,
        .fine_ref_count_mask = 0x0000ffff,

        .reg_global_lock_offset = 0x2c,
        .global_lock_mask = 0x0000ffff,
        .global_unlock_val = 0x0000aaaa,
        .global_lock_val = 0x0000aaab,

        .reg_start_offset = 0x30,
        .reg_nr_per_pin = 3,
        .regmap_config = &dra7_iodelay_regmap_config,
};

static const struct of_device_id ti_iodelay_of_match[] = {
        {.compatible = "ti,dra7-iodelay", .data = &dra7_iodelay_data},
        { /* Hopefully no more.. */ },
};
MODULE_DEVICE_TABLE(of, ti_iodelay_of_match);

/**
 * ti_iodelay_probe() - Standard probe
 * @pdev: platform device
 *
 * Return: 0 if all went fine, else appropriate error value.
 */
static int ti_iodelay_probe(struct platform_device *pdev)
{
        struct device *dev = &pdev->dev;
        struct device_node *np __free(device_node) = of_node_get(dev->of_node);
        struct resource *res;
        struct ti_iodelay_device *iod;
        int ret;

        if (!np) {
                dev_err(dev, "No OF node\n");
                return -EINVAL;
        }

        iod = devm_kzalloc(dev, sizeof(*iod), GFP_KERNEL);
        if (!iod)
                return -ENOMEM;

        iod->dev = dev;
        iod->reg_data = device_get_match_data(dev);
        if (!iod->reg_data) {
                dev_err(dev, "No DATA match\n");
                return -EINVAL;
        }

        /* So far We can assume there is only 1 bank of registers */
        iod->reg_base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
        if (IS_ERR(iod->reg_base))
                return PTR_ERR(iod->reg_base);

        iod->phys_base = res->start;

        iod->regmap = devm_regmap_init_mmio(dev, iod->reg_base,
                                            iod->reg_data->regmap_config);
        if (IS_ERR(iod->regmap)) {
                dev_err(dev, "Regmap MMIO init failed.\n");
                return PTR_ERR(iod->regmap);
        }

        ret = ti_iodelay_pinconf_init_dev(iod);
        if (ret)
                return ret;

        ret = ti_iodelay_alloc_pins(dev, iod, res->start);
        if (ret)
                return ret;

        iod->desc.pctlops = &ti_iodelay_pinctrl_ops;
        /* no pinmux ops - we are pinconf */
        iod->desc.confops = &ti_iodelay_pinctrl_pinconf_ops;
        iod->desc.name = dev_name(dev);
        iod->desc.owner = THIS_MODULE;

        ret = devm_pinctrl_register_and_init(dev, &iod->desc, iod, &iod->pctl);
        if (ret) {
                dev_err(dev, "Failed to register pinctrl\n");
                return ret;
        }

        return pinctrl_enable(iod->pctl);
}

static struct platform_driver ti_iodelay_driver = {
        .probe = ti_iodelay_probe,
        .driver = {
                   .name = DRIVER_NAME,
                   .of_match_table = ti_iodelay_of_match,
        },
};
module_platform_driver(ti_iodelay_driver);

MODULE_AUTHOR("Texas Instruments, Inc.");
MODULE_DESCRIPTION("Pinconf driver for TI's IO Delay module");
MODULE_LICENSE("GPL v2");