root/drivers/pinctrl/nomadik/pinctrl-abx500.c
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (C) ST-Ericsson SA 2013
 *
 * Author: Patrice Chotard <patrice.chotard@st.com>
 *
 * Driver allows to use AxB5xx unused pins to be used as GPIO
 */

#include <linux/bitops.h>
#include <linux/cleanup.h>
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/string_choices.h>
#include <linux/types.h>

#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>

#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>

#include "../core.h"
#include "../pinconf.h"
#include "../pinctrl-utils.h"

#include "pinctrl-abx500.h"

/*
 * GPIO registers offset
 * Bank: 0x10
 */
#define AB8500_GPIO_SEL1_REG    0x00
#define AB8500_GPIO_SEL2_REG    0x01
#define AB8500_GPIO_SEL3_REG    0x02
#define AB8500_GPIO_SEL4_REG    0x03
#define AB8500_GPIO_SEL5_REG    0x04
#define AB8500_GPIO_SEL6_REG    0x05

#define AB8500_GPIO_DIR1_REG    0x10
#define AB8500_GPIO_DIR2_REG    0x11
#define AB8500_GPIO_DIR3_REG    0x12
#define AB8500_GPIO_DIR4_REG    0x13
#define AB8500_GPIO_DIR5_REG    0x14
#define AB8500_GPIO_DIR6_REG    0x15

#define AB8500_GPIO_OUT1_REG    0x20
#define AB8500_GPIO_OUT2_REG    0x21
#define AB8500_GPIO_OUT3_REG    0x22
#define AB8500_GPIO_OUT4_REG    0x23
#define AB8500_GPIO_OUT5_REG    0x24
#define AB8500_GPIO_OUT6_REG    0x25

#define AB8500_GPIO_PUD1_REG    0x30
#define AB8500_GPIO_PUD2_REG    0x31
#define AB8500_GPIO_PUD3_REG    0x32
#define AB8500_GPIO_PUD4_REG    0x33
#define AB8500_GPIO_PUD5_REG    0x34
#define AB8500_GPIO_PUD6_REG    0x35

#define AB8500_GPIO_IN1_REG     0x40
#define AB8500_GPIO_IN2_REG     0x41
#define AB8500_GPIO_IN3_REG     0x42
#define AB8500_GPIO_IN4_REG     0x43
#define AB8500_GPIO_IN5_REG     0x44
#define AB8500_GPIO_IN6_REG     0x45
#define AB8500_GPIO_ALTFUN_REG  0x50

#define ABX500_GPIO_INPUT       0
#define ABX500_GPIO_OUTPUT      1

struct abx500_pinctrl {
        struct device *dev;
        struct pinctrl_dev *pctldev;
        struct abx500_pinctrl_soc_data *soc;
        struct gpio_chip chip;
        struct ab8500 *parent;
        struct abx500_gpio_irq_cluster *irq_cluster;
        int irq_cluster_size;
};

static int abx500_gpio_get_bit(struct gpio_chip *chip, u8 reg,
                               unsigned offset, bool *bit)
{
        struct abx500_pinctrl *pct = gpiochip_get_data(chip);
        u8 pos = offset % 8;
        u8 val;
        int ret;

        reg += offset / 8;
        ret = abx500_get_register_interruptible(pct->dev,
                                                AB8500_MISC, reg, &val);
        if (ret < 0) {
                dev_err(pct->dev,
                        "%s read reg =%x, offset=%x failed (%d)\n",
                        __func__, reg, offset, ret);
                return ret;
        }

        *bit = !!(val & BIT(pos));

        return 0;
}

static int abx500_gpio_set_bits(struct gpio_chip *chip, u8 reg,
                                unsigned offset, int val)
{
        struct abx500_pinctrl *pct = gpiochip_get_data(chip);
        u8 pos = offset % 8;
        int ret;

        reg += offset / 8;
        ret = abx500_mask_and_set_register_interruptible(pct->dev,
                                AB8500_MISC, reg, BIT(pos), val << pos);
        if (ret < 0)
                dev_err(pct->dev, "%s write reg, %x offset %x failed (%d)\n",
                                __func__, reg, offset, ret);

        return ret;
}

/**
 * abx500_gpio_get() - Get the particular GPIO value
 * @chip:       Gpio device
 * @offset:     GPIO number to read
 */
static int abx500_gpio_get(struct gpio_chip *chip, unsigned offset)
{
        struct abx500_pinctrl *pct = gpiochip_get_data(chip);
        bool bit;
        bool is_out;
        u8 gpio_offset = offset - 1;
        int ret;

        ret = abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG,
                        gpio_offset, &is_out);
        if (ret < 0)
                goto out;

        if (is_out)
                ret = abx500_gpio_get_bit(chip, AB8500_GPIO_OUT1_REG,
                                gpio_offset, &bit);
        else
                ret = abx500_gpio_get_bit(chip, AB8500_GPIO_IN1_REG,
                                gpio_offset, &bit);
out:
        if (ret < 0) {
                dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
                return ret;
        }

        return bit;
}

static int abx500_gpio_set(struct gpio_chip *chip, unsigned int offset,
                           int val)
{
        return abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
}

static int abx500_gpio_direction_output(struct gpio_chip *chip,
                                        unsigned offset,
                                        int val)
{
        struct abx500_pinctrl *pct = gpiochip_get_data(chip);
        int ret;

        /* set direction as output */
        ret = abx500_gpio_set_bits(chip,
                                AB8500_GPIO_DIR1_REG,
                                offset,
                                ABX500_GPIO_OUTPUT);
        if (ret < 0)
                goto out;

        /* disable pull down */
        ret = abx500_gpio_set_bits(chip,
                                AB8500_GPIO_PUD1_REG,
                                offset,
                                ABX500_GPIO_PULL_NONE);

out:
        if (ret < 0) {
                dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
                return ret;
        }

        /* set the output as 1 or 0 */
        return abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
}

static int abx500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
        /* set the register as input */
        return abx500_gpio_set_bits(chip,
                                AB8500_GPIO_DIR1_REG,
                                offset,
                                ABX500_GPIO_INPUT);
}

static int abx500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
        struct abx500_pinctrl *pct = gpiochip_get_data(chip);
        /* The AB8500 GPIO numbers are off by one */
        int gpio = offset + 1;
        int hwirq;
        int i;

        for (i = 0; i < pct->irq_cluster_size; i++) {
                struct abx500_gpio_irq_cluster *cluster =
                        &pct->irq_cluster[i];

                if (gpio >= cluster->start && gpio <= cluster->end) {
                        /*
                         * The ABx500 GPIO's associated IRQs are clustered together
                         * throughout the interrupt numbers at irregular intervals.
                         * To solve this quandry, we have placed the read-in values
                         * into the cluster information table.
                         */
                        hwirq = gpio - cluster->start + cluster->to_irq;
                        return irq_create_mapping(pct->parent->domain, hwirq);
                }
        }

        return -EINVAL;
}

static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
                           unsigned gpio, int alt_setting)
{
        struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
        struct alternate_functions af = pct->soc->alternate_functions[gpio];
        int ret;
        int val;
        unsigned offset;

        const char *modes[] = {
                [ABX500_DEFAULT]        = "default",
                [ABX500_ALT_A]          = "altA",
                [ABX500_ALT_B]          = "altB",
                [ABX500_ALT_C]          = "altC",
        };

        /* sanity check */
        if (((alt_setting == ABX500_ALT_A) && (af.gpiosel_bit == UNUSED)) ||
            ((alt_setting == ABX500_ALT_B) && (af.alt_bit1 == UNUSED)) ||
            ((alt_setting == ABX500_ALT_C) && (af.alt_bit2 == UNUSED))) {
                dev_dbg(pct->dev, "pin %d doesn't support %s mode\n", gpio,
                                modes[alt_setting]);
                return -EINVAL;
        }

        /* on ABx5xx, there is no GPIO0, so adjust the offset */
        offset = gpio - 1;

        switch (alt_setting) {
        case ABX500_DEFAULT:
                /*
                 * for ABx5xx family, default mode is always selected by
                 * writing 0 to GPIOSELx register, except for pins which
                 * support at least ALT_B mode, default mode is selected
                 * by writing 1 to GPIOSELx register
                 */
                val = 0;
                if (af.alt_bit1 != UNUSED)
                        val++;

                ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
                                           offset, val);
                break;

        case ABX500_ALT_A:
                /*
                 * for ABx5xx family, alt_a mode is always selected by
                 * writing 1 to GPIOSELx register, except for pins which
                 * support at least ALT_B mode, alt_a mode is selected
                 * by writing 0 to GPIOSELx register and 0 in ALTFUNC
                 * register
                 */
                if (af.alt_bit1 != UNUSED) {
                        ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
                                        offset, 0);
                        if (ret < 0)
                                goto out;

                        ret = abx500_gpio_set_bits(chip,
                                        AB8500_GPIO_ALTFUN_REG,
                                        af.alt_bit1,
                                        !!(af.alta_val & BIT(0)));
                        if (ret < 0)
                                goto out;

                        if (af.alt_bit2 != UNUSED)
                                ret = abx500_gpio_set_bits(chip,
                                        AB8500_GPIO_ALTFUN_REG,
                                        af.alt_bit2,
                                        !!(af.alta_val & BIT(1)));
                } else
                        ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
                                        offset, 1);
                break;

        case ABX500_ALT_B:
                ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
                                offset, 0);
                if (ret < 0)
                        goto out;

                ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
                                af.alt_bit1, !!(af.altb_val & BIT(0)));
                if (ret < 0)
                        goto out;

                if (af.alt_bit2 != UNUSED)
                        ret = abx500_gpio_set_bits(chip,
                                        AB8500_GPIO_ALTFUN_REG,
                                        af.alt_bit2,
                                        !!(af.altb_val & BIT(1)));
                break;

        case ABX500_ALT_C:
                ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
                                offset, 0);
                if (ret < 0)
                        goto out;

                ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
                                af.alt_bit2, !!(af.altc_val & BIT(0)));
                if (ret < 0)
                        goto out;

                ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
                                af.alt_bit2, !!(af.altc_val & BIT(1)));
                break;

        default:
                dev_dbg(pct->dev, "unknown alt_setting %d\n", alt_setting);

                return -EINVAL;
        }
out:
        if (ret < 0)
                dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);

        return ret;
}

#ifdef CONFIG_DEBUG_FS
static int abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
                          unsigned gpio)
{
        u8 mode;
        bool bit_mode;
        bool alt_bit1;
        bool alt_bit2;
        struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
        struct alternate_functions af = pct->soc->alternate_functions[gpio];
        /* on ABx5xx, there is no GPIO0, so adjust the offset */
        unsigned offset = gpio - 1;
        int ret;

        /*
         * if gpiosel_bit is set to unused,
         * it means no GPIO or special case
         */
        if (af.gpiosel_bit == UNUSED)
                return ABX500_DEFAULT;

        /* read GpioSelx register */
        ret = abx500_gpio_get_bit(chip, AB8500_GPIO_SEL1_REG + (offset / 8),
                        af.gpiosel_bit, &bit_mode);
        if (ret < 0)
                goto out;

        mode = bit_mode;

        /* sanity check */
        if ((af.alt_bit1 < UNUSED) || (af.alt_bit1 > 7) ||
            (af.alt_bit2 < UNUSED) || (af.alt_bit2 > 7)) {
                dev_err(pct->dev,
                        "alt_bitX value not in correct range (-1 to 7)\n");
                return -EINVAL;
        }

        /* if alt_bit2 is used, alt_bit1 must be used too */
        if ((af.alt_bit2 != UNUSED) && (af.alt_bit1 == UNUSED)) {
                dev_err(pct->dev,
                        "if alt_bit2 is used, alt_bit1 can't be unused\n");
                return -EINVAL;
        }

        /* check if pin use AlternateFunction register */
        if ((af.alt_bit1 == UNUSED) && (af.alt_bit2 == UNUSED))
                return mode;
        /*
         * if pin GPIOSEL bit is set and pin supports alternate function,
         * it means DEFAULT mode
         */
        if (mode)
                return ABX500_DEFAULT;

        /*
         * pin use the AlternatFunction register
         * read alt_bit1 value
         */
        ret = abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG,
                            af.alt_bit1, &alt_bit1);
        if (ret < 0)
                goto out;

        if (af.alt_bit2 != UNUSED) {
                /* read alt_bit2 value */
                ret = abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG,
                                af.alt_bit2,
                                &alt_bit2);
                if (ret < 0)
                        goto out;
        } else
                alt_bit2 = 0;

        mode = (alt_bit2 << 1) + alt_bit1;
        if (mode == af.alta_val)
                return ABX500_ALT_A;
        else if (mode == af.altb_val)
                return ABX500_ALT_B;
        else
                return ABX500_ALT_C;

out:
        dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
        return ret;
}

static void abx500_gpio_dbg_show_one(struct seq_file *s,
                                     struct pinctrl_dev *pctldev,
                                     struct gpio_chip *chip,
                                     unsigned offset, unsigned gpio)
{
        struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
        u8 gpio_offset = offset - 1;
        int mode = -1;
        bool is_out;
        bool pd;
        int ret = -ENOMEM;

        const char *modes[] = {
                [ABX500_DEFAULT]        = "default",
                [ABX500_ALT_A]          = "altA",
                [ABX500_ALT_B]          = "altB",
                [ABX500_ALT_C]          = "altC",
        };

        const char *pull_up_down[] = {
                [ABX500_GPIO_PULL_DOWN]         = "pull down",
                [ABX500_GPIO_PULL_NONE]         = "pull none",
                [ABX500_GPIO_PULL_NONE + 1]     = "pull none",
                [ABX500_GPIO_PULL_UP]           = "pull up",
        };

        char *label __free(kfree) = gpiochip_dup_line_label(chip, offset - 1);
        if (IS_ERR(label))
                goto out;

        ret = abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG,
                        gpio_offset, &is_out);
        if (ret < 0)
                goto out;

        seq_printf(s, " gpio-%-3d (%-20.20s) %-3s",
                   gpio, label ?: "(none)",
                   is_out ? "out" : "in ");

        if (!is_out) {
                ret = abx500_gpio_get_bit(chip, AB8500_GPIO_PUD1_REG,
                                gpio_offset, &pd);
                if (ret < 0)
                        goto out;

                seq_printf(s, " %-9s", pull_up_down[pd]);
        } else
                seq_printf(s, " %-9s", str_hi_lo(chip->get(chip, offset)));

        mode = abx500_get_mode(pctldev, chip, offset);

        seq_printf(s, " %s", (mode < 0) ? "unknown" : modes[mode]);

out:
        if (ret < 0)
                dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
}

static void abx500_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
        unsigned i;
        unsigned gpio = chip->base;
        struct abx500_pinctrl *pct = gpiochip_get_data(chip);
        struct pinctrl_dev *pctldev = pct->pctldev;

        for (i = 0; i < chip->ngpio; i++, gpio++) {
                /* On AB8500, there is no GPIO0, the first is the GPIO 1 */
                abx500_gpio_dbg_show_one(s, pctldev, chip, i + 1, gpio);
                seq_putc(s, '\n');
        }
}

#else
static inline void abx500_gpio_dbg_show_one(struct seq_file *s,
                                            struct pinctrl_dev *pctldev,
                                            struct gpio_chip *chip,
                                            unsigned offset, unsigned gpio)
{
}
#define abx500_gpio_dbg_show    NULL
#endif

static const struct gpio_chip abx500gpio_chip = {
        .label                  = "abx500-gpio",
        .owner                  = THIS_MODULE,
        .request                = gpiochip_generic_request,
        .free                   = gpiochip_generic_free,
        .direction_input        = abx500_gpio_direction_input,
        .get                    = abx500_gpio_get,
        .direction_output       = abx500_gpio_direction_output,
        .set                    = abx500_gpio_set,
        .to_irq                 = abx500_gpio_to_irq,
        .dbg_show               = abx500_gpio_dbg_show,
};

static int abx500_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
{
        struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);

        return pct->soc->nfunctions;
}

static const char *abx500_pmx_get_func_name(struct pinctrl_dev *pctldev,
                                         unsigned function)
{
        struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);

        return pct->soc->functions[function].name;
}

static int abx500_pmx_get_func_groups(struct pinctrl_dev *pctldev,
                                      unsigned function,
                                      const char * const **groups,
                                      unsigned * const num_groups)
{
        struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);

        *groups = pct->soc->functions[function].groups;
        *num_groups = pct->soc->functions[function].ngroups;

        return 0;
}

static int abx500_pmx_set(struct pinctrl_dev *pctldev, unsigned function,
                          unsigned group)
{
        struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
        struct gpio_chip *chip = &pct->chip;
        const struct abx500_pingroup *g;
        int i;
        int ret = 0;

        g = &pct->soc->groups[group];
        if (g->altsetting < 0)
                return -EINVAL;

        dev_dbg(pct->dev, "enable group %s, %u pins\n", g->name, g->npins);

        for (i = 0; i < g->npins; i++) {
                dev_dbg(pct->dev, "setting pin %d to altsetting %d\n",
                        g->pins[i], g->altsetting);

                ret = abx500_set_mode(pctldev, chip, g->pins[i], g->altsetting);
        }

        if (ret < 0)
                dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);

        return ret;
}

static int abx500_gpio_request_enable(struct pinctrl_dev *pctldev,
                               struct pinctrl_gpio_range *range,
                               unsigned offset)
{
        struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
        const struct abx500_pinrange *p;
        int ret;
        int i;

        /*
         * Different ranges have different ways to enable GPIO function on a
         * pin, so refer back to our local range type, where we handily define
         * what altfunc enables GPIO for a certain pin.
         */
        for (i = 0; i < pct->soc->gpio_num_ranges; i++) {
                p = &pct->soc->gpio_ranges[i];
                if ((offset >= p->offset) &&
                    (offset < (p->offset + p->npins)))
                  break;
        }

        if (i == pct->soc->gpio_num_ranges) {
                dev_err(pct->dev, "%s failed to locate range\n", __func__);
                return -ENODEV;
        }

        dev_dbg(pct->dev, "enable GPIO by altfunc %d at gpio %d\n",
                p->altfunc, offset);

        ret = abx500_set_mode(pct->pctldev, &pct->chip,
                              offset, p->altfunc);
        if (ret < 0)
                dev_err(pct->dev, "%s setting altfunc failed\n", __func__);

        return ret;
}

static void abx500_gpio_disable_free(struct pinctrl_dev *pctldev,
                                     struct pinctrl_gpio_range *range,
                                     unsigned offset)
{
}

static const struct pinmux_ops abx500_pinmux_ops = {
        .get_functions_count = abx500_pmx_get_funcs_cnt,
        .get_function_name = abx500_pmx_get_func_name,
        .get_function_groups = abx500_pmx_get_func_groups,
        .set_mux = abx500_pmx_set,
        .gpio_request_enable = abx500_gpio_request_enable,
        .gpio_disable_free = abx500_gpio_disable_free,
};

static int abx500_get_groups_cnt(struct pinctrl_dev *pctldev)
{
        struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);

        return pct->soc->ngroups;
}

static const char *abx500_get_group_name(struct pinctrl_dev *pctldev,
                                         unsigned selector)
{
        struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);

        return pct->soc->groups[selector].name;
}

static int abx500_get_group_pins(struct pinctrl_dev *pctldev,
                                 unsigned selector,
                                 const unsigned **pins,
                                 unsigned *num_pins)
{
        struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);

        *pins = pct->soc->groups[selector].pins;
        *num_pins = pct->soc->groups[selector].npins;

        return 0;
}

static void abx500_pin_dbg_show(struct pinctrl_dev *pctldev,
                                struct seq_file *s, unsigned offset)
{
        struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
        struct gpio_chip *chip = &pct->chip;

        abx500_gpio_dbg_show_one(s, pctldev, chip, offset,
                                 chip->base + offset - 1);
}

static int abx500_dt_add_map_mux(struct pinctrl_map **map,
                unsigned *reserved_maps,
                unsigned *num_maps, const char *group,
                const char *function)
{
        if (*num_maps == *reserved_maps)
                return -ENOSPC;

        (*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP;
        (*map)[*num_maps].data.mux.group = group;
        (*map)[*num_maps].data.mux.function = function;
        (*num_maps)++;

        return 0;
}

static int abx500_dt_add_map_configs(struct pinctrl_map **map,
                unsigned *reserved_maps,
                unsigned *num_maps, const char *group,
                unsigned long *configs, unsigned num_configs)
{
        unsigned long *dup_configs;

        if (*num_maps == *reserved_maps)
                return -ENOSPC;

        dup_configs = kmemdup_array(configs, num_configs, sizeof(*dup_configs), GFP_KERNEL);
        if (!dup_configs)
                return -ENOMEM;

        (*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_PIN;

        (*map)[*num_maps].data.configs.group_or_pin = group;
        (*map)[*num_maps].data.configs.configs = dup_configs;
        (*map)[*num_maps].data.configs.num_configs = num_configs;
        (*num_maps)++;

        return 0;
}

static const char *abx500_find_pin_name(struct pinctrl_dev *pctldev,
                                        const char *pin_name)
{
        int i, pin_number;
        struct abx500_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);

        if (sscanf((char *)pin_name, "GPIO%d", &pin_number) == 1)
                for (i = 0; i < npct->soc->npins; i++)
                        if (npct->soc->pins[i].number == pin_number)
                                return npct->soc->pins[i].name;
        return NULL;
}

static int abx500_dt_subnode_to_map(struct pinctrl_dev *pctldev,
                struct device_node *np,
                struct pinctrl_map **map,
                unsigned *reserved_maps,
                unsigned *num_maps)
{
        int ret;
        const char *function = NULL;
        unsigned long *configs;
        unsigned int nconfigs = 0;
        struct property *prop;

        ret = of_property_read_string(np, "function", &function);
        if (ret >= 0) {
                const char *group;

                ret = of_property_count_strings(np, "groups");
                if (ret < 0)
                        goto exit;

                ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps,
                                                num_maps, ret);
                if (ret < 0)
                        goto exit;

                of_property_for_each_string(np, "groups", prop, group) {
                        ret = abx500_dt_add_map_mux(map, reserved_maps,
                                        num_maps, group, function);
                        if (ret < 0)
                                goto exit;
                }
        }

        ret = pinconf_generic_parse_dt_config(np, pctldev, &configs, &nconfigs);
        if (nconfigs) {
                const char *gpio_name;
                const char *pin;

                ret = of_property_count_strings(np, "pins");
                if (ret < 0)
                        goto exit;

                ret = pinctrl_utils_reserve_map(pctldev, map,
                                                reserved_maps,
                                                num_maps, ret);
                if (ret < 0)
                        goto exit;

                of_property_for_each_string(np, "pins", prop, pin) {
                        gpio_name = abx500_find_pin_name(pctldev, pin);

                        ret = abx500_dt_add_map_configs(map, reserved_maps,
                                        num_maps, gpio_name, configs, 1);
                        if (ret < 0)
                                goto exit;
                }
        }

exit:
        return ret;
}

static int abx500_dt_node_to_map(struct pinctrl_dev *pctldev,
                                 struct device_node *np_config,
                                 struct pinctrl_map **map, unsigned *num_maps)
{
        unsigned reserved_maps;
        int ret;

        reserved_maps = 0;
        *map = NULL;
        *num_maps = 0;

        for_each_child_of_node_scoped(np_config, np) {
                ret = abx500_dt_subnode_to_map(pctldev, np, map,
                                &reserved_maps, num_maps);
                if (ret < 0) {
                        pinctrl_utils_free_map(pctldev, *map, *num_maps);
                        return ret;
                }
        }

        return 0;
}

static const struct pinctrl_ops abx500_pinctrl_ops = {
        .get_groups_count = abx500_get_groups_cnt,
        .get_group_name = abx500_get_group_name,
        .get_group_pins = abx500_get_group_pins,
        .pin_dbg_show = abx500_pin_dbg_show,
        .dt_node_to_map = abx500_dt_node_to_map,
        .dt_free_map = pinctrl_utils_free_map,
};

static int abx500_pin_config_get(struct pinctrl_dev *pctldev,
                          unsigned pin,
                          unsigned long *config)
{
        return -ENOSYS;
}

static int abx500_pin_config_set(struct pinctrl_dev *pctldev,
                          unsigned pin,
                          unsigned long *configs,
                          unsigned num_configs)
{
        struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
        struct gpio_chip *chip = &pct->chip;
        unsigned offset;
        int ret = -EINVAL;
        int i;
        enum pin_config_param param;
        enum pin_config_param argument;

        for (i = 0; i < num_configs; i++) {
                param = pinconf_to_config_param(configs[i]);
                argument = pinconf_to_config_argument(configs[i]);

                dev_dbg(chip->parent, "pin %d [%#lx]: %s %s\n",
                        pin, configs[i],
                        (param == PIN_CONFIG_LEVEL) ? "output " : "input",
                        (param == PIN_CONFIG_LEVEL) ?
                        str_high_low(argument) :
                        (argument ? "pull up" : "pull down"));

                /* on ABx500, there is no GPIO0, so adjust the offset */
                offset = pin - 1;

                switch (param) {
                case PIN_CONFIG_BIAS_DISABLE:
                        ret = abx500_gpio_direction_input(chip, offset);
                        if (ret < 0)
                                goto out;

                        /* Chip only supports pull down */
                        ret = abx500_gpio_set_bits(chip,
                                AB8500_GPIO_PUD1_REG, offset,
                                ABX500_GPIO_PULL_NONE);
                        break;

                case PIN_CONFIG_BIAS_PULL_DOWN:
                        ret = abx500_gpio_direction_input(chip, offset);
                        if (ret < 0)
                                goto out;
                        /*
                         * if argument = 1 set the pull down
                         * else clear the pull down
                         * Chip only supports pull down
                         */
                        ret = abx500_gpio_set_bits(chip,
                        AB8500_GPIO_PUD1_REG,
                                offset,
                                argument ? ABX500_GPIO_PULL_DOWN :
                                ABX500_GPIO_PULL_NONE);
                        break;

                case PIN_CONFIG_BIAS_PULL_UP:
                        ret = abx500_gpio_direction_input(chip, offset);
                        if (ret < 0)
                                goto out;
                        /*
                         * if argument = 1 set the pull up
                         * else clear the pull up
                         */
                        ret = abx500_gpio_direction_input(chip, offset);
                        break;

                case PIN_CONFIG_LEVEL:
                        ret = abx500_gpio_direction_output(chip, offset,
                                argument);
                        break;

                default:
                        dev_err(chip->parent,
                                "illegal configuration requested\n");
                }
        } /* for each config */
out:
        if (ret < 0)
                dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);

        return ret;
}

static const struct pinconf_ops abx500_pinconf_ops = {
        .pin_config_get = abx500_pin_config_get,
        .pin_config_set = abx500_pin_config_set,
        .is_generic = true,
};

static struct pinctrl_desc abx500_pinctrl_desc = {
        .name = "pinctrl-abx500",
        .pctlops = &abx500_pinctrl_ops,
        .pmxops = &abx500_pinmux_ops,
        .confops = &abx500_pinconf_ops,
        .owner = THIS_MODULE,
};

static int abx500_get_gpio_num(struct abx500_pinctrl_soc_data *soc)
{
        unsigned int lowest = 0;
        unsigned int highest = 0;
        unsigned int npins = 0;
        int i;

        /*
         * Compute number of GPIOs from the last SoC gpio range descriptors
         * These ranges may include "holes" but the GPIO number space shall
         * still be homogeneous, so we need to detect and account for any
         * such holes so that these are included in the number of GPIO pins.
         */
        for (i = 0; i < soc->gpio_num_ranges; i++) {
                unsigned gstart;
                unsigned gend;
                const struct abx500_pinrange *p;

                p = &soc->gpio_ranges[i];
                gstart = p->offset;
                gend = p->offset + p->npins - 1;

                if (i == 0) {
                        /* First iteration, set start values */
                        lowest = gstart;
                        highest = gend;
                } else {
                        if (gstart < lowest)
                                lowest = gstart;
                        if (gend > highest)
                                highest = gend;
                }
        }
        /* this gives the absolute number of pins */
        npins = highest - lowest + 1;
        return npins;
}

static const struct of_device_id abx500_gpio_match[] = {
        { .compatible = "stericsson,ab8500-gpio", .data = (void *)PINCTRL_AB8500, },
        { .compatible = "stericsson,ab8505-gpio", .data = (void *)PINCTRL_AB8505, },
        { }
};

static int abx500_gpio_probe(struct platform_device *pdev)
{
        struct device_node *np = pdev->dev.of_node;
        struct abx500_pinctrl *pct;
        unsigned int id = -1;
        int ret;
        int i;

        if (!np) {
                dev_err(&pdev->dev, "gpio dt node missing\n");
                return -ENODEV;
        }

        pct = devm_kzalloc(&pdev->dev, sizeof(*pct), GFP_KERNEL);
        if (!pct)
                return -ENOMEM;

        pct->dev = &pdev->dev;
        pct->parent = dev_get_drvdata(pdev->dev.parent);
        pct->chip = abx500gpio_chip;
        pct->chip.parent = &pdev->dev;
        pct->chip.base = -1; /* Dynamic allocation */

        id = (unsigned long)device_get_match_data(&pdev->dev);

        /* Poke in other ASIC variants here */
        switch (id) {
        case PINCTRL_AB8500:
                abx500_pinctrl_ab8500_init(&pct->soc);
                break;
        case PINCTRL_AB8505:
                abx500_pinctrl_ab8505_init(&pct->soc);
                break;
        default:
                dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n", id);
                return -EINVAL;
        }

        if (!pct->soc) {
                dev_err(&pdev->dev, "Invalid SOC data\n");
                return -EINVAL;
        }

        pct->chip.ngpio = abx500_get_gpio_num(pct->soc);
        pct->irq_cluster = pct->soc->gpio_irq_cluster;
        pct->irq_cluster_size = pct->soc->ngpio_irq_cluster;

        ret = gpiochip_add_data(&pct->chip, pct);
        if (ret) {
                dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
                return ret;
        }
        dev_info(&pdev->dev, "added gpiochip\n");

        abx500_pinctrl_desc.pins = pct->soc->pins;
        abx500_pinctrl_desc.npins = pct->soc->npins;
        pct->pctldev = devm_pinctrl_register(&pdev->dev, &abx500_pinctrl_desc,
                                             pct);
        if (IS_ERR(pct->pctldev)) {
                dev_err(&pdev->dev,
                        "could not register abx500 pinctrl driver\n");
                ret = PTR_ERR(pct->pctldev);
                goto out_rem_chip;
        }
        dev_info(&pdev->dev, "registered pin controller\n");

        /* We will handle a range of GPIO pins */
        for (i = 0; i < pct->soc->gpio_num_ranges; i++) {
                const struct abx500_pinrange *p = &pct->soc->gpio_ranges[i];

                ret = gpiochip_add_pin_range(&pct->chip,
                                        dev_name(&pdev->dev),
                                        p->offset - 1, p->offset, p->npins);
                if (ret < 0)
                        goto out_rem_chip;
        }

        platform_set_drvdata(pdev, pct);
        dev_info(&pdev->dev, "initialized abx500 pinctrl driver\n");

        return 0;

out_rem_chip:
        gpiochip_remove(&pct->chip);
        return ret;
}

/**
 * abx500_gpio_remove() - remove Ab8500-gpio driver
 * @pdev:       Platform device registered
 */
static void abx500_gpio_remove(struct platform_device *pdev)
{
        struct abx500_pinctrl *pct = platform_get_drvdata(pdev);

        gpiochip_remove(&pct->chip);
}

static struct platform_driver abx500_gpio_driver = {
        .driver = {
                .name = "abx500-gpio",
                .of_match_table = abx500_gpio_match,
        },
        .probe = abx500_gpio_probe,
        .remove = abx500_gpio_remove,
};

static int __init abx500_gpio_init(void)
{
        return platform_driver_register(&abx500_gpio_driver);
}
core_initcall(abx500_gpio_init);