// SPDX-License-Identifier: GPL-2.0
/*
 * AD7192 and similar SPI ADC driver
 *
 * Copyright 2011-2015 Analog Devices Inc.
 */

#include <linux/interrupt.h>
#include <linux/bitfield.h>
#include <linux/cleanup.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/property.h>
#include <linux/units.h>

#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/adc/ad_sigma_delta.h>

/* Registers */
#define AD7192_REG_COMM         0 /* Communications Register (WO, 8-bit) */
#define AD7192_REG_STAT         0 /* Status Register         (RO, 8-bit) */
#define AD7192_REG_MODE         1 /* Mode Register           (RW, 24-bit */
#define AD7192_REG_CONF         2 /* Configuration Register  (RW, 24-bit) */
#define AD7192_REG_DATA         3 /* Data Register           (RO, 24/32-bit) */
#define AD7192_REG_ID           4 /* ID Register             (RO, 8-bit) */
#define AD7192_REG_GPOCON       5 /* GPOCON Register         (RO, 8-bit) */
#define AD7192_REG_OFFSET       6 /* Offset Register         (RW, 16-bit */
                                  /* (AD7792)/24-bit (AD7192)) */
#define AD7192_REG_FULLSALE     7 /* Full-Scale Register */
                                  /* (RW, 16-bit (AD7792)/24-bit (AD7192)) */

/* Communications Register Bit Designations (AD7192_REG_COMM) */
#define AD7192_COMM_WEN         BIT(7) /* Write Enable */
#define AD7192_COMM_WRITE       0 /* Write Operation */
#define AD7192_COMM_READ        BIT(6) /* Read Operation */
#define AD7192_COMM_ADDR_MASK   GENMASK(5, 3) /* Register Address Mask */
#define AD7192_COMM_CREAD       BIT(2) /* Continuous Read of Data Register */

/* Status Register Bit Designations (AD7192_REG_STAT) */
#define AD7192_STAT_RDY         BIT(7) /* Ready */
#define AD7192_STAT_ERR         BIT(6) /* Error (Overrange, Underrange) */
#define AD7192_STAT_NOREF       BIT(5) /* Error no external reference */
#define AD7192_STAT_PARITY      BIT(4) /* Parity */
#define AD7192_STAT_CH3         BIT(2) /* Channel 3 */
#define AD7192_STAT_CH2         BIT(1) /* Channel 2 */
#define AD7192_STAT_CH1         BIT(0) /* Channel 1 */

/* Mode Register Bit Designations (AD7192_REG_MODE) */
#define AD7192_MODE_SEL_MASK    GENMASK(23, 21) /* Operation Mode Select Mask */
#define AD7192_MODE_STA_MASK    BIT(20) /* Status Register transmission Mask */
#define AD7192_MODE_CLKSRC_MASK GENMASK(19, 18) /* Clock Source Select Mask */
#define AD7192_MODE_AVG_MASK    GENMASK(17, 16)
                  /* Fast Settling Filter Average Select Mask (AD7193 only) */
#define AD7192_MODE_SINC3       BIT(15) /* SINC3 Filter Select */
#define AD7192_MODE_ENPAR       BIT(13) /* Parity Enable */
#define AD7192_MODE_CLKDIV      BIT(12) /* Clock divide by 2 (AD7190/2 only)*/
#define AD7192_MODE_SCYCLE      BIT(11) /* Single cycle conversion */
#define AD7192_MODE_REJ60       BIT(10) /* 50/60Hz notch filter */
                                  /* Filter Update Rate Select Mask */
#define AD7192_MODE_RATE_MASK   GENMASK(9, 0)

/* Mode Register: AD7192_MODE_SEL options */
#define AD7192_MODE_CONT                0 /* Continuous Conversion Mode */
#define AD7192_MODE_SINGLE              1 /* Single Conversion Mode */
#define AD7192_MODE_IDLE                2 /* Idle Mode */
#define AD7192_MODE_PWRDN               3 /* Power-Down Mode */
#define AD7192_MODE_CAL_INT_ZERO        4 /* Internal Zero-Scale Calibration */
#define AD7192_MODE_CAL_INT_FULL        5 /* Internal Full-Scale Calibration */
#define AD7192_MODE_CAL_SYS_ZERO        6 /* System Zero-Scale Calibration */
#define AD7192_MODE_CAL_SYS_FULL        7 /* System Full-Scale Calibration */

/* Mode Register: AD7192_MODE_CLKSRC options */
#define AD7192_CLK_EXT_MCLK1_2          0 /* External 4.92 MHz Clock connected*/
                                          /* from MCLK1 to MCLK2 */
#define AD7192_CLK_EXT_MCLK2            1 /* External Clock applied to MCLK2 */
#define AD7192_CLK_INT                  2 /* Internal 4.92 MHz Clock not */
                                          /* available at the MCLK2 pin */
#define AD7192_CLK_INT_CO               3 /* Internal 4.92 MHz Clock available*/
                                          /* at the MCLK2 pin */

/* Configuration Register Bit Designations (AD7192_REG_CONF) */

#define AD7192_CONF_CHOP        BIT(23) /* CHOP enable */
#define AD7192_CONF_ACX         BIT(22) /* AC excitation enable(AD7195 only) */
#define AD7192_CONF_REFSEL      BIT(20) /* REFIN1/REFIN2 Reference Select */
#define AD7192_CONF_CHAN_MASK   GENMASK(18, 8) /* Channel select mask */
#define AD7192_CONF_BURN        BIT(7) /* Burnout current enable */
#define AD7192_CONF_REFDET      BIT(6) /* Reference detect enable */
#define AD7192_CONF_BUF         BIT(4) /* Buffered Mode Enable */
#define AD7192_CONF_UNIPOLAR    BIT(3) /* Unipolar/Bipolar Enable */
#define AD7192_CONF_GAIN_MASK   GENMASK(2, 0) /* Gain Select */

#define AD7192_CH_AIN1P_AIN2M   BIT(0) /* AIN1(+) - AIN2(-) */
#define AD7192_CH_AIN3P_AIN4M   BIT(1) /* AIN3(+) - AIN4(-) */
#define AD7192_CH_TEMP          BIT(2) /* Temp Sensor */
#define AD7192_CH_AIN2P_AIN2M   BIT(3) /* AIN2(+) - AIN2(-) */
#define AD7192_CH_AIN1          BIT(4) /* AIN1 - AINCOM */
#define AD7192_CH_AIN2          BIT(5) /* AIN2 - AINCOM */
#define AD7192_CH_AIN3          BIT(6) /* AIN3 - AINCOM */
#define AD7192_CH_AIN4          BIT(7) /* AIN4 - AINCOM */

#define AD7193_CH_AIN1P_AIN2M   0x001  /* AIN1(+) - AIN2(-) */
#define AD7193_CH_AIN3P_AIN4M   0x002  /* AIN3(+) - AIN4(-) */
#define AD7193_CH_AIN5P_AIN6M   0x004  /* AIN5(+) - AIN6(-) */
#define AD7193_CH_AIN7P_AIN8M   0x008  /* AIN7(+) - AIN8(-) */
#define AD7193_CH_TEMP          0x100 /* Temp senseor */
#define AD7193_CH_AIN2P_AIN2M   0x200 /* AIN2(+) - AIN2(-) */
#define AD7193_CH_AIN1          0x401 /* AIN1 - AINCOM */
#define AD7193_CH_AIN2          0x402 /* AIN2 - AINCOM */
#define AD7193_CH_AIN3          0x404 /* AIN3 - AINCOM */
#define AD7193_CH_AIN4          0x408 /* AIN4 - AINCOM */
#define AD7193_CH_AIN5          0x410 /* AIN5 - AINCOM */
#define AD7193_CH_AIN6          0x420 /* AIN6 - AINCOM */
#define AD7193_CH_AIN7          0x440 /* AIN7 - AINCOM */
#define AD7193_CH_AIN8          0x480 /* AIN7 - AINCOM */
#define AD7193_CH_AINCOM        0x600 /* AINCOM - AINCOM */

#define AD7194_CH_POS(x)        (((x) - 1) << 4)
#define AD7194_CH_NEG(x)        ((x) - 1)

/* 10th bit corresponds to CON18(Pseudo) */
#define AD7194_CH(p)            (BIT(10) | AD7194_CH_POS(p))

#define AD7194_DIFF_CH(p, n)    (AD7194_CH_POS(p) | AD7194_CH_NEG(n))
#define AD7194_CH_TEMP          0x100
#define AD7194_CH_BASE_NR       2
#define AD7194_CH_AIN_START     1
#define AD7194_CH_AIN_NR        16
#define AD7194_CH_MAX_NR        272

/* ID Register Bit Designations (AD7192_REG_ID) */
#define CHIPID_AD7190           0x4
#define CHIPID_AD7192           0x0
#define CHIPID_AD7193           0x2
#define CHIPID_AD7194           0x3
#define CHIPID_AD7195           0x6
#define AD7192_ID_MASK          GENMASK(3, 0)

/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */
#define AD7192_GPOCON_BPDSW     BIT(6) /* Bridge power-down switch enable */
#define AD7192_GPOCON_GP32EN    BIT(5) /* Digital Output P3 and P2 enable */
#define AD7192_GPOCON_GP10EN    BIT(4) /* Digital Output P1 and P0 enable */
#define AD7192_GPOCON_P3DAT     BIT(3) /* P3 state */
#define AD7192_GPOCON_P2DAT     BIT(2) /* P2 state */
#define AD7192_GPOCON_P1DAT     BIT(1) /* P1 state */
#define AD7192_GPOCON_P0DAT     BIT(0) /* P0 state */

#define AD7192_EXT_FREQ_MHZ_MIN 2457600
#define AD7192_EXT_FREQ_MHZ_MAX 5120000
#define AD7192_INT_FREQ_MHZ     4915200

#define AD7192_NO_SYNC_FILTER   1
#define AD7192_SYNC3_FILTER     3
#define AD7192_SYNC4_FILTER     4

/* NOTE:
 * The AD7190/2/5 features a dual use data out ready DOUT/RDY output.
 * In order to avoid contentions on the SPI bus, it's therefore necessary
 * to use spi bus locking.
 *
 * The DOUT/RDY output must also be wired to an interrupt capable GPIO.
 */

enum {
        AD7192_SYSCALIB_ZERO_SCALE,
        AD7192_SYSCALIB_FULL_SCALE,
};

enum {
        ID_AD7190,
        ID_AD7192,
        ID_AD7193,
        ID_AD7194,
        ID_AD7195,
};

struct ad7192_chip_info {
        unsigned int                    chip_id;
        const char                      *name;
        const struct iio_chan_spec      *channels;
        u8                              num_channels;
        const struct ad_sigma_delta_info        *sigma_delta_info;
        const struct iio_info           *info;
        int (*parse_channels)(struct iio_dev *indio_dev);
};

struct ad7192_state {
        const struct ad7192_chip_info   *chip_info;
        struct clk                      *mclk;
        struct clk_hw                   int_clk_hw;
        u16                             int_vref_mv;
        u32                             aincom_mv;
        u32                             fclk;
        u32                             mode;
        u32                             conf;
        u32                             scale_avail[8][2];
        u32                             filter_freq_avail[4][2];
        u32                             oversampling_ratio_avail[4];
        u8                              gpocon;
        u8                              clock_sel;
        struct mutex                    lock;   /* protect sensor state */
        u8                              syscalib_mode[8];

        struct ad_sigma_delta           sd;
};

static const char * const ad7192_syscalib_modes[] = {
        [AD7192_SYSCALIB_ZERO_SCALE] = "zero_scale",
        [AD7192_SYSCALIB_FULL_SCALE] = "full_scale",
};

static int ad7192_set_syscalib_mode(struct iio_dev *indio_dev,
                                    const struct iio_chan_spec *chan,
                                    unsigned int mode)
{
        struct ad7192_state *st = iio_priv(indio_dev);

        st->syscalib_mode[chan->channel] = mode;

        return 0;
}

static int ad7192_get_syscalib_mode(struct iio_dev *indio_dev,
                                    const struct iio_chan_spec *chan)
{
        struct ad7192_state *st = iio_priv(indio_dev);

        return st->syscalib_mode[chan->channel];
}

static ssize_t ad7192_write_syscalib(struct iio_dev *indio_dev,
                                     uintptr_t private,
                                     const struct iio_chan_spec *chan,
                                     const char *buf, size_t len)
{
        struct ad7192_state *st = iio_priv(indio_dev);
        bool sys_calib;
        int ret, temp;

        ret = kstrtobool(buf, &sys_calib);
        if (ret)
                return ret;

        if (!iio_device_claim_direct(indio_dev))
                return -EBUSY;

        temp = st->syscalib_mode[chan->channel];
        if (sys_calib) {
                if (temp == AD7192_SYSCALIB_ZERO_SCALE)
                        ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_ZERO,
                                              chan->address);
                else
                        ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_FULL,
                                              chan->address);
        }

        iio_device_release_direct(indio_dev);

        return ret ? ret : len;
}

static const struct iio_enum ad7192_syscalib_mode_enum = {
        .items = ad7192_syscalib_modes,
        .num_items = ARRAY_SIZE(ad7192_syscalib_modes),
        .set = ad7192_set_syscalib_mode,
        .get = ad7192_get_syscalib_mode
};

static const struct iio_chan_spec_ext_info ad7192_calibsys_ext_info[] = {
        {
                .name = "sys_calibration",
                .write = ad7192_write_syscalib,
                .shared = IIO_SEPARATE,
        },
        IIO_ENUM("sys_calibration_mode", IIO_SEPARATE,
                 &ad7192_syscalib_mode_enum),
        IIO_ENUM_AVAILABLE("sys_calibration_mode", IIO_SHARED_BY_TYPE,
                           &ad7192_syscalib_mode_enum),
        { }
};

static struct ad7192_state *ad_sigma_delta_to_ad7192(struct ad_sigma_delta *sd)
{
        return container_of(sd, struct ad7192_state, sd);
}

static int ad7192_set_channel(struct ad_sigma_delta *sd, unsigned int channel)
{
        struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);

        st->conf &= ~AD7192_CONF_CHAN_MASK;
        st->conf |= FIELD_PREP(AD7192_CONF_CHAN_MASK, channel);

        return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
}

static int ad7192_set_mode(struct ad_sigma_delta *sd,
                           enum ad_sigma_delta_mode mode)
{
        struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);

        st->mode &= ~AD7192_MODE_SEL_MASK;
        st->mode |= FIELD_PREP(AD7192_MODE_SEL_MASK, mode);

        return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
}

static int ad7192_append_status(struct ad_sigma_delta *sd, bool append)
{
        struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);
        unsigned int mode = st->mode;
        int ret;

        mode &= ~AD7192_MODE_STA_MASK;
        mode |= FIELD_PREP(AD7192_MODE_STA_MASK, append);

        ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, mode);
        if (ret < 0)
                return ret;

        st->mode = mode;

        return 0;
}

static int ad7192_disable_all(struct ad_sigma_delta *sd)
{
        struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);
        u32 conf = st->conf;
        int ret;

        conf &= ~AD7192_CONF_CHAN_MASK;

        ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, conf);
        if (ret < 0)
                return ret;

        st->conf = conf;

        return 0;
}

static const struct ad_sigma_delta_info ad7192_sigma_delta_info = {
        .set_channel = ad7192_set_channel,
        .append_status = ad7192_append_status,
        .disable_all = ad7192_disable_all,
        .set_mode = ad7192_set_mode,
        .has_registers = true,
        .addr_shift = 3,
        .read_mask = BIT(6),
        .status_ch_mask = GENMASK(3, 0),
        .num_slots = 4,
        .irq_flags = IRQF_TRIGGER_FALLING,
        .num_resetclks = 40,
};

static const struct ad_sigma_delta_info ad7194_sigma_delta_info = {
        .set_channel = ad7192_set_channel,
        .append_status = ad7192_append_status,
        .disable_all = ad7192_disable_all,
        .set_mode = ad7192_set_mode,
        .has_registers = true,
        .addr_shift = 3,
        .read_mask = BIT(6),
        .status_ch_mask = GENMASK(3, 0),
        .irq_flags = IRQF_TRIGGER_FALLING,
        .num_resetclks = 40,
};

static const struct ad_sd_calib_data ad7192_calib_arr[8] = {
        {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN1},
        {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN1},
        {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN2},
        {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN2},
        {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN3},
        {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN3},
        {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN4},
        {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN4}
};

static int ad7192_calibrate_all(struct ad7192_state *st)
{
        return ad_sd_calibrate_all(&st->sd, ad7192_calib_arr,
                                   ARRAY_SIZE(ad7192_calib_arr));
}

static inline bool ad7192_valid_external_frequency(u32 freq)
{
        return (freq >= AD7192_EXT_FREQ_MHZ_MIN &&
                freq <= AD7192_EXT_FREQ_MHZ_MAX);
}

/*
 * Position 0 of ad7192_clock_names, xtal, corresponds to clock source
 * configuration AD7192_CLK_EXT_MCLK1_2 and position 1, mclk, corresponds to
 * AD7192_CLK_EXT_MCLK2
 */
static const char *const ad7192_clock_names[] = {
        "xtal",
        "mclk"
};

static struct ad7192_state *clk_hw_to_ad7192(struct clk_hw *hw)
{
        return container_of(hw, struct ad7192_state, int_clk_hw);
}

static unsigned long ad7192_clk_recalc_rate(struct clk_hw *hw,
                                            unsigned long parent_rate)
{
        return AD7192_INT_FREQ_MHZ;
}

static int ad7192_clk_output_is_enabled(struct clk_hw *hw)
{
        struct ad7192_state *st = clk_hw_to_ad7192(hw);

        return st->clock_sel == AD7192_CLK_INT_CO;
}

static int ad7192_clk_prepare(struct clk_hw *hw)
{
        struct ad7192_state *st = clk_hw_to_ad7192(hw);
        int ret;

        st->mode &= ~AD7192_MODE_CLKSRC_MASK;
        st->mode |= AD7192_CLK_INT_CO;

        ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
        if (ret)
                return ret;

        st->clock_sel = AD7192_CLK_INT_CO;

        return 0;
}

static void ad7192_clk_unprepare(struct clk_hw *hw)
{
        struct ad7192_state *st = clk_hw_to_ad7192(hw);
        int ret;

        st->mode &= ~AD7192_MODE_CLKSRC_MASK;
        st->mode |= AD7192_CLK_INT;

        ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
        if (ret)
                return;

        st->clock_sel = AD7192_CLK_INT;
}

static const struct clk_ops ad7192_int_clk_ops = {
        .recalc_rate = ad7192_clk_recalc_rate,
        .is_enabled = ad7192_clk_output_is_enabled,
        .prepare = ad7192_clk_prepare,
        .unprepare = ad7192_clk_unprepare,
};

static int ad7192_register_clk_provider(struct ad7192_state *st)
{
        struct device *dev = &st->sd.spi->dev;
        struct clk_init_data init = {};
        int ret;

        if (!IS_ENABLED(CONFIG_COMMON_CLK))
                return 0;

        if (!device_property_present(dev, "#clock-cells"))
                return 0;

        init.name = devm_kasprintf(dev, GFP_KERNEL, "%s-clk",
                                   fwnode_get_name(dev_fwnode(dev)));
        if (!init.name)
                return -ENOMEM;

        init.ops = &ad7192_int_clk_ops;

        st->int_clk_hw.init = &init;
        ret = devm_clk_hw_register(dev, &st->int_clk_hw);
        if (ret)
                return ret;

        return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
                                           &st->int_clk_hw);
}

static int ad7192_clock_setup(struct ad7192_state *st)
{
        struct device *dev = &st->sd.spi->dev;
        int ret;

        /*
         * The following two if branches are kept for backward compatibility but
         * the use of the two devicetree properties is highly discouraged. Clock
         * configuration should be done according to the bindings.
         */

        if (device_property_read_bool(dev, "adi,int-clock-output-enable")) {
                st->clock_sel = AD7192_CLK_INT_CO;
                st->fclk = AD7192_INT_FREQ_MHZ;
                dev_warn(dev, "Property adi,int-clock-output-enable is deprecated! Check bindings!\n");
                return 0;
        }

        if (device_property_read_bool(dev, "adi,clock-xtal")) {
                st->clock_sel = AD7192_CLK_EXT_MCLK1_2;
                st->mclk = devm_clk_get_enabled(dev, "mclk");
                if (IS_ERR(st->mclk))
                        return dev_err_probe(dev, PTR_ERR(st->mclk),
                                             "Failed to get mclk\n");

                st->fclk = clk_get_rate(st->mclk);
                if (!ad7192_valid_external_frequency(st->fclk))
                        return dev_err_probe(dev, -EINVAL,
                                             "External clock frequency out of bounds\n");

                dev_warn(dev, "Property adi,clock-xtal is deprecated! Check bindings!\n");
                return 0;
        }

        ret = device_property_match_property_string(dev, "clock-names",
                                                    ad7192_clock_names,
                                                    ARRAY_SIZE(ad7192_clock_names));
        if (ret < 0) {
                st->clock_sel = AD7192_CLK_INT;
                st->fclk = AD7192_INT_FREQ_MHZ;

                ret = ad7192_register_clk_provider(st);
                if (ret)
                        return dev_err_probe(dev, ret,
                                             "Failed to register clock provider\n");
                return 0;
        }

        st->clock_sel = AD7192_CLK_EXT_MCLK1_2 + ret;

        st->mclk = devm_clk_get_enabled(dev, ad7192_clock_names[ret]);
        if (IS_ERR(st->mclk))
                return dev_err_probe(dev, PTR_ERR(st->mclk),
                                     "Failed to get clock source\n");

        st->fclk = clk_get_rate(st->mclk);
        if (!ad7192_valid_external_frequency(st->fclk))
                return dev_err_probe(dev, -EINVAL,
                                     "External clock frequency out of bounds\n");

        return 0;
}

static int ad7192_setup(struct iio_dev *indio_dev, struct device *dev)
{
        struct ad7192_state *st = iio_priv(indio_dev);
        bool rej60_en, refin2_en;
        bool buf_en, bipolar, burnout_curr_en;
        unsigned long long scale_uv;
        int i, ret, id;

        /* reset the serial interface */
        ret = ad_sd_reset(&st->sd);
        if (ret < 0)
                return ret;
        usleep_range(500, 1000); /* Wait for at least 500us */

        /* write/read test for device presence */
        ret = ad_sd_read_reg(&st->sd, AD7192_REG_ID, 1, &id);
        if (ret)
                return ret;

        id = FIELD_GET(AD7192_ID_MASK, id);

        if (id != st->chip_info->chip_id)
                dev_warn(dev, "device ID query failed (0x%X != 0x%X)\n",
                         id, st->chip_info->chip_id);

        st->mode = FIELD_PREP(AD7192_MODE_SEL_MASK, AD7192_MODE_IDLE) |
                FIELD_PREP(AD7192_MODE_CLKSRC_MASK, st->clock_sel) |
                FIELD_PREP(AD7192_MODE_RATE_MASK, 480);

        st->conf = FIELD_PREP(AD7192_CONF_GAIN_MASK, 0);

        rej60_en = device_property_read_bool(dev, "adi,rejection-60-Hz-enable");
        if (rej60_en)
                st->mode |= AD7192_MODE_REJ60;

        refin2_en = device_property_read_bool(dev, "adi,refin2-pins-enable");
        if (refin2_en && st->chip_info->chip_id != CHIPID_AD7195)
                st->conf |= AD7192_CONF_REFSEL;

        st->conf &= ~AD7192_CONF_CHOP;

        buf_en = device_property_read_bool(dev, "adi,buffer-enable");
        if (buf_en)
                st->conf |= AD7192_CONF_BUF;

        bipolar = device_property_read_bool(dev, "bipolar");
        if (!bipolar)
                st->conf |= AD7192_CONF_UNIPOLAR;

        burnout_curr_en = device_property_read_bool(dev,
                                                    "adi,burnout-currents-enable");
        if (burnout_curr_en && buf_en) {
                st->conf |= AD7192_CONF_BURN;
        } else if (burnout_curr_en) {
                dev_warn(dev,
                         "Can't enable burnout currents: see CHOP or buffer\n");
        }

        ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
        if (ret)
                return ret;

        ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
        if (ret)
                return ret;

        ret = ad7192_calibrate_all(st);
        if (ret)
                return ret;

        /* Populate available ADC input ranges */
        for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) {
                scale_uv = ((u64)st->int_vref_mv * 100000000)
                        >> (indio_dev->channels[0].scan_type.realbits -
                        !FIELD_GET(AD7192_CONF_UNIPOLAR, st->conf));
                scale_uv >>= i;

                st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10;
                st->scale_avail[i][0] = scale_uv;
        }

        st->oversampling_ratio_avail[0] = 1;
        st->oversampling_ratio_avail[1] = 2;
        st->oversampling_ratio_avail[2] = 8;
        st->oversampling_ratio_avail[3] = 16;

        st->filter_freq_avail[0][0] = 600;
        st->filter_freq_avail[1][0] = 800;
        st->filter_freq_avail[2][0] = 2300;
        st->filter_freq_avail[3][0] = 2720;

        st->filter_freq_avail[0][1] = 1000;
        st->filter_freq_avail[1][1] = 1000;
        st->filter_freq_avail[2][1] = 1000;
        st->filter_freq_avail[3][1] = 1000;

        return 0;
}

static ssize_t ad7192_show_ac_excitation(struct device *dev,
                                         struct device_attribute *attr,
                                         char *buf)
{
        struct iio_dev *indio_dev = dev_to_iio_dev(dev);
        struct ad7192_state *st = iio_priv(indio_dev);

        return sysfs_emit(buf, "%ld\n", FIELD_GET(AD7192_CONF_ACX, st->conf));
}

static ssize_t ad7192_show_bridge_switch(struct device *dev,
                                         struct device_attribute *attr,
                                         char *buf)
{
        struct iio_dev *indio_dev = dev_to_iio_dev(dev);
        struct ad7192_state *st = iio_priv(indio_dev);

        return sysfs_emit(buf, "%ld\n",
                          FIELD_GET(AD7192_GPOCON_BPDSW, st->gpocon));
}

static ssize_t ad7192_set(struct device *dev,
                          struct device_attribute *attr,
                          const char *buf,
                          size_t len)
{
        struct iio_dev *indio_dev = dev_to_iio_dev(dev);
        struct ad7192_state *st = iio_priv(indio_dev);
        struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
        int ret;
        bool val;

        ret = kstrtobool(buf, &val);
        if (ret < 0)
                return ret;

        if (!iio_device_claim_direct(indio_dev))
                return -EBUSY;

        switch ((u32)this_attr->address) {
        case AD7192_REG_GPOCON:
                if (val)
                        st->gpocon |= AD7192_GPOCON_BPDSW;
                else
                        st->gpocon &= ~AD7192_GPOCON_BPDSW;

                ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon);
                break;
        case AD7192_REG_CONF:
                if (val)
                        st->conf |= AD7192_CONF_ACX;
                else
                        st->conf &= ~AD7192_CONF_ACX;

                ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
                break;
        default:
                ret = -EINVAL;
        }

        iio_device_release_direct(indio_dev);

        return ret ? ret : len;
}

static int ad7192_compute_f_order(struct ad7192_state *st, bool sinc3_en, bool chop_en)
{
        u8 avg_factor_selected, oversampling_ratio;

        avg_factor_selected = FIELD_GET(AD7192_MODE_AVG_MASK, st->mode);

        if (!avg_factor_selected && !chop_en)
                return 1;

        oversampling_ratio = st->oversampling_ratio_avail[avg_factor_selected];

        if (sinc3_en)
                return AD7192_SYNC3_FILTER + oversampling_ratio - 1;

        return AD7192_SYNC4_FILTER + oversampling_ratio - 1;
}

static int ad7192_get_f_order(struct ad7192_state *st)
{
        bool sinc3_en, chop_en;

        sinc3_en = FIELD_GET(AD7192_MODE_SINC3, st->mode);
        chop_en = FIELD_GET(AD7192_CONF_CHOP, st->conf);

        return ad7192_compute_f_order(st, sinc3_en, chop_en);
}

static int ad7192_compute_f_adc(struct ad7192_state *st, bool sinc3_en,
                                bool chop_en)
{
        unsigned int f_order = ad7192_compute_f_order(st, sinc3_en, chop_en);

        return DIV_ROUND_CLOSEST(st->fclk,
                                 f_order * FIELD_GET(AD7192_MODE_RATE_MASK, st->mode));
}

static int ad7192_get_f_adc(struct ad7192_state *st)
{
        unsigned int f_order = ad7192_get_f_order(st);

        return DIV_ROUND_CLOSEST(st->fclk,
                                 f_order * FIELD_GET(AD7192_MODE_RATE_MASK, st->mode));
}

static void ad7192_update_filter_freq_avail(struct ad7192_state *st)
{
        unsigned int fadc;

        /* Formulas for filter at page 25 of the datasheet */
        fadc = ad7192_compute_f_adc(st, false, true);
        st->filter_freq_avail[0][0] = DIV_ROUND_CLOSEST(fadc * 240, 1024);

        fadc = ad7192_compute_f_adc(st, true, true);
        st->filter_freq_avail[1][0] = DIV_ROUND_CLOSEST(fadc * 240, 1024);

        fadc = ad7192_compute_f_adc(st, false, false);
        st->filter_freq_avail[2][0] = DIV_ROUND_CLOSEST(fadc * 230, 1024);

        fadc = ad7192_compute_f_adc(st, true, false);
        st->filter_freq_avail[3][0] = DIV_ROUND_CLOSEST(fadc * 272, 1024);
}

static IIO_DEVICE_ATTR(bridge_switch_en, 0644,
                       ad7192_show_bridge_switch, ad7192_set,
                       AD7192_REG_GPOCON);

static IIO_DEVICE_ATTR(ac_excitation_en, 0644,
                       ad7192_show_ac_excitation, ad7192_set,
                       AD7192_REG_CONF);

static struct attribute *ad7192_attributes[] = {
        &iio_dev_attr_bridge_switch_en.dev_attr.attr,
        NULL
};

static const struct attribute_group ad7192_attribute_group = {
        .attrs = ad7192_attributes,
};

static struct attribute *ad7195_attributes[] = {
        &iio_dev_attr_bridge_switch_en.dev_attr.attr,
        &iio_dev_attr_ac_excitation_en.dev_attr.attr,
        NULL
};

static const struct attribute_group ad7195_attribute_group = {
        .attrs = ad7195_attributes,
};

static unsigned int ad7192_get_temp_scale(bool unipolar)
{
        return unipolar ? 2815 * 2 : 2815;
}

static int ad7192_set_3db_filter_freq(struct ad7192_state *st,
                                      int val, int val2)
{
        int i, ret, freq;
        unsigned int diff_new, diff_old;
        int idx = 0;

        diff_old = U32_MAX;
        freq = val * 1000 + val2;

        for (i = 0; i < ARRAY_SIZE(st->filter_freq_avail); i++) {
                diff_new = abs(freq - st->filter_freq_avail[i][0]);
                if (diff_new < diff_old) {
                        diff_old = diff_new;
                        idx = i;
                }
        }

        switch (idx) {
        case 0:
                st->mode &= ~AD7192_MODE_SINC3;

                st->conf |= AD7192_CONF_CHOP;
                break;
        case 1:
                st->mode |= AD7192_MODE_SINC3;

                st->conf |= AD7192_CONF_CHOP;
                break;
        case 2:
                st->mode &= ~AD7192_MODE_SINC3;

                st->conf &= ~AD7192_CONF_CHOP;
                break;
        case 3:
                st->mode |= AD7192_MODE_SINC3;

                st->conf &= ~AD7192_CONF_CHOP;
                break;
        }

        ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
        if (ret < 0)
                return ret;

        return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
}

static int ad7192_get_3db_filter_freq(struct ad7192_state *st)
{
        unsigned int fadc;

        fadc = ad7192_get_f_adc(st);

        if (FIELD_GET(AD7192_CONF_CHOP, st->conf))
                return DIV_ROUND_CLOSEST(fadc * 240, 1024);
        if (FIELD_GET(AD7192_MODE_SINC3, st->mode))
                return DIV_ROUND_CLOSEST(fadc * 272, 1024);
        else
                return DIV_ROUND_CLOSEST(fadc * 230, 1024);
}

static int ad7192_read_raw(struct iio_dev *indio_dev,
                           struct iio_chan_spec const *chan,
                           int *val,
                           int *val2,
                           long m)
{
        struct ad7192_state *st = iio_priv(indio_dev);
        bool unipolar = FIELD_GET(AD7192_CONF_UNIPOLAR, st->conf);
        u8 gain = FIELD_GET(AD7192_CONF_GAIN_MASK, st->conf);

        switch (m) {
        case IIO_CHAN_INFO_RAW:
                return ad_sigma_delta_single_conversion(indio_dev, chan, val);
        case IIO_CHAN_INFO_SCALE:
                switch (chan->type) {
                case IIO_VOLTAGE:
                        mutex_lock(&st->lock);
                        *val = st->scale_avail[gain][0];
                        *val2 = st->scale_avail[gain][1];
                        mutex_unlock(&st->lock);
                        return IIO_VAL_INT_PLUS_NANO;
                case IIO_TEMP:
                        *val = 0;
                        *val2 = 1000000000 / ad7192_get_temp_scale(unipolar);
                        return IIO_VAL_INT_PLUS_NANO;
                default:
                        return -EINVAL;
                }
        case IIO_CHAN_INFO_OFFSET:
                if (!unipolar)
                        *val = -(1 << (chan->scan_type.realbits - 1));
                else
                        *val = 0;

                switch (chan->type) {
                case IIO_VOLTAGE:
                        /*
                         * Only applies to pseudo-differential inputs.
                         * AINCOM voltage has to be converted to "raw" units.
                         */
                        if (st->aincom_mv && !chan->differential)
                                *val += DIV_ROUND_CLOSEST_ULL((u64)st->aincom_mv * NANO,
                                                              st->scale_avail[gain][1]);
                        return IIO_VAL_INT;
                /* Kelvin to Celsius */
                case IIO_TEMP:
                        *val -= 273 * ad7192_get_temp_scale(unipolar);
                        return IIO_VAL_INT;
                default:
                        return -EINVAL;
                }
        case IIO_CHAN_INFO_SAMP_FREQ:
                *val = DIV_ROUND_CLOSEST(ad7192_get_f_adc(st), 1024);
                return IIO_VAL_INT;
        case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
                *val = ad7192_get_3db_filter_freq(st);
                *val2 = 1000;
                return IIO_VAL_FRACTIONAL;
        case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
                *val = st->oversampling_ratio_avail[FIELD_GET(AD7192_MODE_AVG_MASK, st->mode)];
                return IIO_VAL_INT;
        }

        return -EINVAL;
}

static int __ad7192_write_raw(struct iio_dev *indio_dev,
                              struct iio_chan_spec const *chan,
                              int val,
                              int val2,
                              long mask)
{
        struct ad7192_state *st = iio_priv(indio_dev);
        int i, div;
        unsigned int tmp;

        guard(mutex)(&st->lock);

        switch (mask) {
        case IIO_CHAN_INFO_SCALE:
                for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) {
                        if (val2 != st->scale_avail[i][1])
                                continue;

                        tmp = st->conf;
                        st->conf &= ~AD7192_CONF_GAIN_MASK;
                        st->conf |= FIELD_PREP(AD7192_CONF_GAIN_MASK, i);
                        if (tmp == st->conf)
                                return 0;
                        ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
                        ad7192_calibrate_all(st);
                        return 0;
                }
                return -EINVAL;
        case IIO_CHAN_INFO_SAMP_FREQ:
                if (!val)
                        return -EINVAL;

                div = st->fclk / (val * ad7192_get_f_order(st) * 1024);
                if (div < 1 || div > 1023)
                        return -EINVAL;

                st->mode &= ~AD7192_MODE_RATE_MASK;
                st->mode |= FIELD_PREP(AD7192_MODE_RATE_MASK, div);
                ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
                ad7192_update_filter_freq_avail(st);
                return 0;
        case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
                return ad7192_set_3db_filter_freq(st, val, val2 / 1000);
        case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
                for (i = 0; i < ARRAY_SIZE(st->oversampling_ratio_avail); i++) {
                        if (val != st->oversampling_ratio_avail[i])
                                continue;

                        tmp = st->mode;
                        st->mode &= ~AD7192_MODE_AVG_MASK;
                        st->mode |= FIELD_PREP(AD7192_MODE_AVG_MASK, i);
                        if (tmp == st->mode)
                                return 0;
                        ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
                        ad7192_update_filter_freq_avail(st);
                        return 0;
                }
                return -EINVAL;
        default:
                return -EINVAL;
        }
}

static int ad7192_write_raw(struct iio_dev *indio_dev,
                            struct iio_chan_spec const *chan,
                            int val,
                            int val2,
                            long mask)
{
        int ret;

        if (!iio_device_claim_direct(indio_dev))
                return -EBUSY;

        ret = __ad7192_write_raw(indio_dev, chan, val, val2, mask);

        iio_device_release_direct(indio_dev);

        return ret;
}

static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev,
                                    struct iio_chan_spec const *chan,
                                    long mask)
{
        switch (mask) {
        case IIO_CHAN_INFO_SCALE:
                return IIO_VAL_INT_PLUS_NANO;
        case IIO_CHAN_INFO_SAMP_FREQ:
                return IIO_VAL_INT;
        case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
                return IIO_VAL_INT_PLUS_MICRO;
        case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
                return IIO_VAL_INT;
        default:
                return -EINVAL;
        }
}

static int ad7192_read_avail(struct iio_dev *indio_dev,
                             struct iio_chan_spec const *chan,
                             const int **vals, int *type, int *length,
                             long mask)
{
        struct ad7192_state *st = iio_priv(indio_dev);

        switch (mask) {
        case IIO_CHAN_INFO_SCALE:
                *vals = (int *)st->scale_avail;
                *type = IIO_VAL_INT_PLUS_NANO;
                /* Values are stored in a 2D matrix  */
                *length = ARRAY_SIZE(st->scale_avail) * 2;

                return IIO_AVAIL_LIST;
        case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
                *vals = (int *)st->filter_freq_avail;
                *type = IIO_VAL_FRACTIONAL;
                *length = ARRAY_SIZE(st->filter_freq_avail) * 2;

                return IIO_AVAIL_LIST;
        case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
                *vals = (int *)st->oversampling_ratio_avail;
                *type = IIO_VAL_INT;
                *length = ARRAY_SIZE(st->oversampling_ratio_avail);

                return IIO_AVAIL_LIST;
        }

        return -EINVAL;
}

static int ad7192_update_scan_mode(struct iio_dev *indio_dev, const unsigned long *scan_mask)
{
        struct ad7192_state *st = iio_priv(indio_dev);
        u32 conf = st->conf;
        int ret;
        int i;

        conf &= ~AD7192_CONF_CHAN_MASK;
        for_each_set_bit(i, scan_mask, 8)
                conf |= FIELD_PREP(AD7192_CONF_CHAN_MASK, BIT(i));

        ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, conf);
        if (ret < 0)
                return ret;

        st->conf = conf;

        return 0;
}

static const struct iio_info ad7192_info = {
        .read_raw = ad7192_read_raw,
        .write_raw = ad7192_write_raw,
        .write_raw_get_fmt = ad7192_write_raw_get_fmt,
        .read_avail = ad7192_read_avail,
        .attrs = &ad7192_attribute_group,
        .validate_trigger = ad_sd_validate_trigger,
        .update_scan_mode = ad7192_update_scan_mode,
};

static const struct iio_info ad7194_info = {
        .read_raw = ad7192_read_raw,
        .write_raw = ad7192_write_raw,
        .write_raw_get_fmt = ad7192_write_raw_get_fmt,
        .read_avail = ad7192_read_avail,
        .validate_trigger = ad_sd_validate_trigger,
};

static const struct iio_info ad7195_info = {
        .read_raw = ad7192_read_raw,
        .write_raw = ad7192_write_raw,
        .write_raw_get_fmt = ad7192_write_raw_get_fmt,
        .read_avail = ad7192_read_avail,
        .attrs = &ad7195_attribute_group,
        .validate_trigger = ad_sd_validate_trigger,
        .update_scan_mode = ad7192_update_scan_mode,
};

#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _type, \
        _mask_all, _mask_type_av, _mask_all_av, _ext_info) \
        { \
                .type = (_type), \
                .differential = ((_channel2) == -1 ? 0 : 1), \
                .indexed = 1, \
                .channel = (_channel1), \
                .channel2 = (_channel2), \
                .address = (_address), \
                .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
                        BIT(IIO_CHAN_INFO_OFFSET), \
                .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
                .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
                        BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \
                        (_mask_all), \
                .info_mask_shared_by_type_available = (_mask_type_av), \
                .info_mask_shared_by_all_available = \
                        BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \
                        (_mask_all_av), \
                .ext_info = (_ext_info), \
                .scan_index = (_si), \
                .scan_type = { \
                        .sign = 'u', \
                        .realbits = 24, \
                        .storagebits = 32, \
                        .endianness = IIO_BE, \
                }, \
        }

#define AD719x_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \
        __AD719x_CHANNEL(_si, _channel1, _channel2, _address, IIO_VOLTAGE, 0, \
                BIT(IIO_CHAN_INFO_SCALE), 0, ad7192_calibsys_ext_info)

#define AD719x_CHANNEL(_si, _channel1, _address) \
        __AD719x_CHANNEL(_si, _channel1, -1, _address, IIO_VOLTAGE, 0, \
                BIT(IIO_CHAN_INFO_SCALE), 0, ad7192_calibsys_ext_info)

#define AD719x_TEMP_CHANNEL(_si, _address) \
        __AD719x_CHANNEL(_si, 0, -1, _address, IIO_TEMP, 0, 0, 0, NULL)

#define AD7193_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \
        __AD719x_CHANNEL(_si, _channel1, _channel2, _address, \
                IIO_VOLTAGE, \
                BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
                BIT(IIO_CHAN_INFO_SCALE), \
                BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
                ad7192_calibsys_ext_info)

#define AD7193_CHANNEL(_si, _channel1, _address) \
        AD7193_DIFF_CHANNEL(_si, _channel1, -1, _address)

static const struct iio_chan_spec ad7192_channels[] = {
        AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M),
        AD719x_DIFF_CHANNEL(1, 3, 4, AD7192_CH_AIN3P_AIN4M),
        AD719x_TEMP_CHANNEL(2, AD7192_CH_TEMP),
        AD719x_DIFF_CHANNEL(3, 2, 2, AD7192_CH_AIN2P_AIN2M),
        AD719x_CHANNEL(4, 1, AD7192_CH_AIN1),
        AD719x_CHANNEL(5, 2, AD7192_CH_AIN2),
        AD719x_CHANNEL(6, 3, AD7192_CH_AIN3),
        AD719x_CHANNEL(7, 4, AD7192_CH_AIN4),
        IIO_CHAN_SOFT_TIMESTAMP(8),
};

static const struct iio_chan_spec ad7193_channels[] = {
        AD7193_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M),
        AD7193_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M),
        AD7193_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M),
        AD7193_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M),
        AD719x_TEMP_CHANNEL(4, AD7193_CH_TEMP),
        AD7193_DIFF_CHANNEL(5, 2, 2, AD7193_CH_AIN2P_AIN2M),
        AD7193_CHANNEL(6, 1, AD7193_CH_AIN1),
        AD7193_CHANNEL(7, 2, AD7193_CH_AIN2),
        AD7193_CHANNEL(8, 3, AD7193_CH_AIN3),
        AD7193_CHANNEL(9, 4, AD7193_CH_AIN4),
        AD7193_CHANNEL(10, 5, AD7193_CH_AIN5),
        AD7193_CHANNEL(11, 6, AD7193_CH_AIN6),
        AD7193_CHANNEL(12, 7, AD7193_CH_AIN7),
        AD7193_CHANNEL(13, 8, AD7193_CH_AIN8),
        IIO_CHAN_SOFT_TIMESTAMP(14),
};

static bool ad7194_validate_ain_channel(struct device *dev, u32 ain)
{
        return in_range(ain, AD7194_CH_AIN_START, AD7194_CH_AIN_NR);
}

static int ad7194_parse_channels(struct iio_dev *indio_dev)
{
        struct device *dev = indio_dev->dev.parent;
        struct iio_chan_spec *ad7194_channels;
        const struct iio_chan_spec ad7194_chan = AD7193_CHANNEL(0, 0, 0);
        const struct iio_chan_spec ad7194_chan_diff = AD7193_DIFF_CHANNEL(0, 0, 0, 0);
        const struct iio_chan_spec ad7194_chan_temp = AD719x_TEMP_CHANNEL(0, 0);
        const struct iio_chan_spec ad7194_chan_timestamp = IIO_CHAN_SOFT_TIMESTAMP(0);
        unsigned int num_channels, index = 0;
        u32 ain[2];
        int ret;

        num_channels = device_get_child_node_count(dev);
        if (num_channels > AD7194_CH_MAX_NR)
                return dev_err_probe(dev, -EINVAL, "Too many channels: %u\n",
                                     num_channels);

        num_channels += AD7194_CH_BASE_NR;

        ad7194_channels = devm_kcalloc(dev, num_channels,
                                       sizeof(*ad7194_channels), GFP_KERNEL);
        if (!ad7194_channels)
                return -ENOMEM;

        indio_dev->channels = ad7194_channels;
        indio_dev->num_channels = num_channels;

        device_for_each_child_node_scoped(dev, child) {
                ret = fwnode_property_read_u32_array(child, "diff-channels",
                                                     ain, ARRAY_SIZE(ain));
                if (ret == 0) {
                        if (!ad7194_validate_ain_channel(dev, ain[0]))
                                return dev_err_probe(dev, -EINVAL,
                                                     "Invalid AIN channel: %u\n",
                                                     ain[0]);

                        if (!ad7194_validate_ain_channel(dev, ain[1]))
                                return dev_err_probe(dev, -EINVAL,
                                                     "Invalid AIN channel: %u\n",
                                                     ain[1]);

                        *ad7194_channels = ad7194_chan_diff;
                        ad7194_channels->scan_index = index++;
                        ad7194_channels->channel = ain[0];
                        ad7194_channels->channel2 = ain[1];
                        ad7194_channels->address = AD7194_DIFF_CH(ain[0], ain[1]);
                } else {
                        ret = fwnode_property_read_u32(child, "single-channel",
                                                       &ain[0]);
                        if (ret)
                                return dev_err_probe(dev, ret,
                                                     "Missing channel property\n");

                        if (!ad7194_validate_ain_channel(dev, ain[0]))
                                return dev_err_probe(dev, -EINVAL,
                                                     "Invalid AIN channel: %u\n",
                                                     ain[0]);

                        *ad7194_channels = ad7194_chan;
                        ad7194_channels->scan_index = index++;
                        ad7194_channels->channel = ain[0];
                        ad7194_channels->address = AD7194_CH(ain[0]);
                }
                ad7194_channels++;
        }

        *ad7194_channels = ad7194_chan_temp;
        ad7194_channels->scan_index = index++;
        ad7194_channels->address = AD7194_CH_TEMP;
        ad7194_channels++;

        *ad7194_channels = ad7194_chan_timestamp;
        ad7194_channels->scan_index = index;

        return 0;
}

static const struct ad7192_chip_info ad7192_chip_info_tbl[] = {
        [ID_AD7190] = {
                .chip_id = CHIPID_AD7190,
                .name = "ad7190",
                .channels = ad7192_channels,
                .num_channels = ARRAY_SIZE(ad7192_channels),
                .sigma_delta_info = &ad7192_sigma_delta_info,
                .info = &ad7192_info,
        },
        [ID_AD7192] = {
                .chip_id = CHIPID_AD7192,
                .name = "ad7192",
                .channels = ad7192_channels,
                .num_channels = ARRAY_SIZE(ad7192_channels),
                .sigma_delta_info = &ad7192_sigma_delta_info,
                .info = &ad7192_info,
        },
        [ID_AD7193] = {
                .chip_id = CHIPID_AD7193,
                .name = "ad7193",
                .channels = ad7193_channels,
                .num_channels = ARRAY_SIZE(ad7193_channels),
                .sigma_delta_info = &ad7192_sigma_delta_info,
                .info = &ad7192_info,
        },
        [ID_AD7194] = {
                .chip_id = CHIPID_AD7194,
                .name = "ad7194",
                .info = &ad7194_info,
                .sigma_delta_info = &ad7194_sigma_delta_info,
                .parse_channels = ad7194_parse_channels,
        },
        [ID_AD7195] = {
                .chip_id = CHIPID_AD7195,
                .name = "ad7195",
                .channels = ad7192_channels,
                .num_channels = ARRAY_SIZE(ad7192_channels),
                .sigma_delta_info = &ad7192_sigma_delta_info,
                .info = &ad7195_info,
        },
};

static int ad7192_probe(struct spi_device *spi)
{
        struct device *dev = &spi->dev;
        struct ad7192_state *st;
        struct iio_dev *indio_dev;
        int ret, avdd_mv;

        if (!spi->irq)
                return dev_err_probe(dev, -ENODEV, "Failed to get IRQ\n");

        indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
        if (!indio_dev)
                return -ENOMEM;

        st = iio_priv(indio_dev);

        mutex_init(&st->lock);

        /*
         * Regulator aincom is optional to maintain compatibility with older DT.
         * Newer firmware should provide a zero volt fixed supply if wired to
         * ground.
         */
        ret = devm_regulator_get_enable_read_voltage(dev, "aincom");
        if (ret < 0 && ret != -ENODEV)
                return dev_err_probe(dev, ret, "Failed to get AINCOM voltage\n");

        st->aincom_mv = ret == -ENODEV ? 0 : ret / MILLI;

        /* AVDD can optionally be used as reference voltage */
        ret = devm_regulator_get_enable_read_voltage(dev, "avdd");
        if (ret == -ENODEV || ret == -EINVAL) {
                int ret2;

                /*
                 * We get -EINVAL if avdd is a supply with unknown voltage. We
                 * still need to enable it since it is also a power supply.
                 */
                ret2 = devm_regulator_get_enable(dev, "avdd");
                if (ret2)
                        return dev_err_probe(dev, ret2,
                                             "Failed to enable AVDD supply\n");
        } else if (ret < 0) {
                return dev_err_probe(dev, ret, "Failed to get AVDD voltage\n");
        }

        avdd_mv = ret == -ENODEV || ret == -EINVAL ? 0 : ret / MILLI;

        ret = devm_regulator_get_enable(dev, "dvdd");
        if (ret)
                return dev_err_probe(dev, ret, "Failed to enable specified DVdd supply\n");

        /*
         * This is either REFIN1 or REFIN2 depending on adi,refin2-pins-enable.
         * If this supply is not present, fall back to AVDD as reference.
         */
        ret = devm_regulator_get_enable_read_voltage(dev, "vref");
        if (ret == -ENODEV) {
                if (avdd_mv == 0)
                        return dev_err_probe(dev, -ENODEV,
                                             "No reference voltage available\n");
        } else if (ret < 0) {
                return ret;
        }

        st->int_vref_mv = ret == -ENODEV ? avdd_mv : ret / MILLI;

        st->chip_info = spi_get_device_match_data(spi);
        if (!st->chip_info)
                return -ENODEV;

        indio_dev->name = st->chip_info->name;
        indio_dev->modes = INDIO_DIRECT_MODE;
        indio_dev->info = st->chip_info->info;
        if (st->chip_info->parse_channels) {
                ret = st->chip_info->parse_channels(indio_dev);
                if (ret)
                        return ret;
        } else {
                indio_dev->channels = st->chip_info->channels;
                indio_dev->num_channels = st->chip_info->num_channels;
        }

        ret = ad_sd_init(&st->sd, indio_dev, spi, st->chip_info->sigma_delta_info);
        if (ret)
                return ret;

        ret = devm_ad_sd_setup_buffer_and_trigger(dev, indio_dev);
        if (ret)
                return ret;

        ret = ad7192_clock_setup(st);
        if (ret)
                return ret;

        ret = ad7192_setup(indio_dev, dev);
        if (ret)
                return ret;

        return devm_iio_device_register(dev, indio_dev);
}

static const struct of_device_id ad7192_of_match[] = {
        { .compatible = "adi,ad7190", .data = &ad7192_chip_info_tbl[ID_AD7190] },
        { .compatible = "adi,ad7192", .data = &ad7192_chip_info_tbl[ID_AD7192] },
        { .compatible = "adi,ad7193", .data = &ad7192_chip_info_tbl[ID_AD7193] },
        { .compatible = "adi,ad7194", .data = &ad7192_chip_info_tbl[ID_AD7194] },
        { .compatible = "adi,ad7195", .data = &ad7192_chip_info_tbl[ID_AD7195] },
        { }
};
MODULE_DEVICE_TABLE(of, ad7192_of_match);

static const struct spi_device_id ad7192_ids[] = {
        { "ad7190", (kernel_ulong_t)&ad7192_chip_info_tbl[ID_AD7190] },
        { "ad7192", (kernel_ulong_t)&ad7192_chip_info_tbl[ID_AD7192] },
        { "ad7193", (kernel_ulong_t)&ad7192_chip_info_tbl[ID_AD7193] },
        { "ad7194", (kernel_ulong_t)&ad7192_chip_info_tbl[ID_AD7194] },
        { "ad7195", (kernel_ulong_t)&ad7192_chip_info_tbl[ID_AD7195] },
        { }
};
MODULE_DEVICE_TABLE(spi, ad7192_ids);

static struct spi_driver ad7192_driver = {
        .driver = {
                .name   = "ad7192",
                .of_match_table = ad7192_of_match,
        },
        .probe          = ad7192_probe,
        .id_table       = ad7192_ids,
};
module_spi_driver(ad7192_driver);

MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
MODULE_DESCRIPTION("Analog Devices AD7192 and similar ADC");
MODULE_LICENSE("GPL v2");
MODULE_IMPORT_NS("IIO_AD_SIGMA_DELTA");