/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_BRCMPHY_H
#define _LINUX_BRCMPHY_H

#include <linux/phy.h>

/* All Broadcom Ethernet switches have a pseudo-PHY at address 30 which is used
 * to configure the switch internal registers via MDIO accesses.
 */
#define BRCM_PSEUDO_PHY_ADDR           30

#define PHY_ID_BCM50610                 0x0143bd60
#define PHY_ID_BCM50610M                0x0143bd70
#define PHY_ID_BCM5221                  0x004061e0
#define PHY_ID_BCM5241                  0x0143bc30
#define PHY_ID_BCMAC131                 0x0143bc70
#define PHY_ID_BCM5481                  0x0143bca0
#define PHY_ID_BCM5395                  0x0143bcf0
#define PHY_ID_BCM53125                 0x03625f20
#define PHY_ID_BCM53128                 0x03625e10
#define PHY_ID_BCM54810                 0x03625d00
#define PHY_ID_BCM54811                 0x03625cc0
#define PHY_ID_BCM5482                  0x0143bcb0
#define PHY_ID_BCM5411                  0x00206070
#define PHY_ID_BCM5421                  0x002060e0
#define PHY_ID_BCM54210E                0x600d84a0
#define PHY_ID_BCM5464                  0x002060b0
#define PHY_ID_BCM5461                  0x002060c0
#define PHY_ID_BCM54612E                0x03625e60
#define PHY_ID_BCM54616S                0x03625d10
#define PHY_ID_BCM54140                 0xae025009
#define PHY_ID_BCM57780                 0x03625d90
#define PHY_ID_BCM89610                 0x03625cd0

#define PHY_ID_BCM72113                 0x35905310
#define PHY_ID_BCM72116                 0x35905350
#define PHY_ID_BCM72165                 0x35905340
#define PHY_ID_BCM7250                  0xae025280
#define PHY_ID_BCM7255                  0xae025120
#define PHY_ID_BCM7260                  0xae025190
#define PHY_ID_BCM7268                  0xae025090
#define PHY_ID_BCM7271                  0xae0253b0
#define PHY_ID_BCM7278                  0xae0251a0
#define PHY_ID_BCM7364                  0xae025260
#define PHY_ID_BCM7366                  0x600d8490
#define PHY_ID_BCM7346                  0x600d8650
#define PHY_ID_BCM7362                  0x600d84b0
#define PHY_ID_BCM74165                 0x359052c0
#define PHY_ID_BCM7425                  0x600d86b0
#define PHY_ID_BCM7429                  0x600d8730
#define PHY_ID_BCM7435                  0x600d8750
#define PHY_ID_BCM74371                 0xae0252e0
#define PHY_ID_BCM7439                  0x600d8480
#define PHY_ID_BCM7439_2                0xae025080
#define PHY_ID_BCM7445                  0x600d8510
#define PHY_ID_BCM7712                  0x35905330

#define PHY_ID_BCM_CYGNUS               0xae025200
#define PHY_ID_BCM_OMEGA                0xae025100

#define PHY_BCM_OUI_MASK                0xfffffc00
#define PHY_BCM_OUI_1                   0x00206000
#define PHY_BCM_OUI_2                   0x0143bc00
#define PHY_BCM_OUI_3                   0x03625c00
#define PHY_BCM_OUI_4                   0x600d8400
#define PHY_BCM_OUI_5                   0x03625e00
#define PHY_BCM_OUI_6                   0xae025000

#define PHY_BRCM_AUTO_PWRDWN_ENABLE     0x00000001
#define PHY_BRCM_RX_REFCLK_UNUSED       0x00000002
#define PHY_BRCM_CLEAR_RGMII_MODE       0x00000004
#define PHY_BRCM_DIS_TXCRXC_NOENRGY     0x00000008
#define PHY_BRCM_EN_MASTER_MODE         0x00000010
#define PHY_BRCM_IDDQ_SUSPEND           0x00000020

/* Broadcom BCM7xxx specific workarounds */
#define PHY_BRCM_7XXX_REV(x)            (((x) >> 8) & 0xff)
#define PHY_BRCM_7XXX_PATCH(x)          ((x) & 0xff)
#define PHY_BCM_FLAGS_VALID             0x80000000

/* Broadcom BCM54XX register definitions, common to most Broadcom PHYs */
#define MII_BCM54XX_ECR         0x10    /* BCM54xx extended control register */
#define MII_BCM54XX_ECR_IM      0x1000  /* Interrupt mask */
#define MII_BCM54XX_ECR_IF      0x0800  /* Interrupt force */
#define MII_BCM54XX_ECR_FIFOE   0x0001  /* FIFO elasticity */

#define MII_BCM54XX_ESR         0x11    /* BCM54xx extended status register */
#define MII_BCM54XX_ESR_IS      0x1000  /* Interrupt status */

#define MII_BCM54XX_EXP_DATA    0x15    /* Expansion register data */
#define MII_BCM54XX_EXP_SEL     0x17    /* Expansion register select */
#define MII_BCM54XX_EXP_SEL_TOP 0x0d00  /* TOP_MISC expansion register select */
#define MII_BCM54XX_EXP_SEL_SSD 0x0e00  /* Secondary SerDes select */
#define MII_BCM54XX_EXP_SEL_WOL 0x0e00  /* Wake-on-LAN expansion select register */
#define MII_BCM54XX_EXP_SEL_ER  0x0f00  /* Expansion register select */
#define MII_BCM54XX_EXP_SEL_ETC 0x0d00  /* Expansion register spare + 2k mem */

#define MII_BCM54XX_AUX_CTL     0x18    /* Auxiliary control register */
#define MII_BCM54XX_ISR         0x1a    /* BCM54xx interrupt status register */
#define MII_BCM54XX_IMR         0x1b    /* BCM54xx interrupt mask register */
#define MII_BCM54XX_INT_CRCERR  0x0001  /* CRC error */
#define MII_BCM54XX_INT_LINK    0x0002  /* Link status changed */
#define MII_BCM54XX_INT_SPEED   0x0004  /* Link speed change */
#define MII_BCM54XX_INT_DUPLEX  0x0008  /* Duplex mode changed */
#define MII_BCM54XX_INT_LRS     0x0010  /* Local receiver status changed */
#define MII_BCM54XX_INT_RRS     0x0020  /* Remote receiver status changed */
#define MII_BCM54XX_INT_SSERR   0x0040  /* Scrambler synchronization error */
#define MII_BCM54XX_INT_UHCD    0x0080  /* Unsupported HCD negotiated */
#define MII_BCM54XX_INT_NHCD    0x0100  /* No HCD */
#define MII_BCM54XX_INT_NHCDL   0x0200  /* No HCD link */
#define MII_BCM54XX_INT_ANPR    0x0400  /* Auto-negotiation page received */
#define MII_BCM54XX_INT_LC      0x0800  /* All counters below 128 */
#define MII_BCM54XX_INT_HC      0x1000  /* Counter above 32768 */
#define MII_BCM54XX_INT_MDIX    0x2000  /* MDIX status change */
#define MII_BCM54XX_INT_PSERR   0x4000  /* Pair swap error */

#define MII_BCM54XX_SHD         0x1c    /* 0x1c shadow registers */
#define MII_BCM54XX_SHD_WRITE   0x8000
#define MII_BCM54XX_SHD_VAL(x)  ((x & 0x1f) << 10)
#define MII_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)

#define MII_BCM54XX_RDB_ADDR    0x1e
#define MII_BCM54XX_RDB_DATA    0x1f

/* legacy access control via rdb/expansion register */
#define BCM54XX_RDB_REG0087             0x0087
#define BCM54XX_EXP_REG7E               (MII_BCM54XX_EXP_SEL_ER + 0x7E)
#define BCM54XX_ACCESS_MODE_LEGACY_EN   BIT(15)

/*
 * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
 */
#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL       0x00
#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB          0x0400
#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA       0x0800
#define MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN     0x4000

#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC                 0x07
#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN    0x0010
#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RSVD            0x0060
#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN        0x0080
#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN   0x0100
#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX             0x0200
#define MII_BCM54XX_AUXCTL_MISC_WREN                    0x8000

#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT   12
#define MII_BCM54XX_AUXCTL_SHDWSEL_MASK 0x0007

/*
 * Broadcom LED source encodings.  These are used in BCM5461, BCM5481,
 * BCM5482, and possibly some others.
 */
#define BCM_LED_SRC_LINKSPD1    0x0
#define BCM_LED_SRC_LINKSPD2    0x1
#define BCM_LED_SRC_XMITLED     0x2
#define BCM_LED_SRC_ACTIVITYLED 0x3
#define BCM_LED_SRC_FDXLED      0x4
#define BCM_LED_SRC_SLAVE       0x5
#define BCM_LED_SRC_INTR        0x6
#define BCM_LED_SRC_QUALITY     0x7
#define BCM_LED_SRC_RCVLED      0x8
#define BCM_LED_SRC_WIRESPEED   0x9
#define BCM_LED_SRC_MULTICOLOR1 0xa
#define BCM_LED_SRC_OPENSHORT   0xb
#define BCM_LED_SRC_OFF         0xe     /* Tied high */
#define BCM_LED_SRC_ON          0xf     /* Tied low */
#define BCM_LED_SRC_MASK        GENMASK(3, 0)

/*
 * Broadcom Multicolor LED configurations (expansion register 4)
 */
#define BCM_EXP_MULTICOLOR              (MII_BCM54XX_EXP_SEL_ER + 0x04)
#define BCM_LED_MULTICOLOR_IN_PHASE     BIT(8)
#define BCM_LED_MULTICOLOR_LINK_ACT     0x0
#define BCM_LED_MULTICOLOR_SPEED        0x1
#define BCM_LED_MULTICOLOR_ACT_FLASH    0x2
#define BCM_LED_MULTICOLOR_FDX          0x3
#define BCM_LED_MULTICOLOR_OFF          0x4
#define BCM_LED_MULTICOLOR_ON           0x5
#define BCM_LED_MULTICOLOR_ALT          0x6
#define BCM_LED_MULTICOLOR_FLASH        0x7
#define BCM_LED_MULTICOLOR_LINK         0x8
#define BCM_LED_MULTICOLOR_ACT          0x9
#define BCM_LED_MULTICOLOR_PROGRAM      0xa

/*
 * Broadcom Synchronous Ethernet Controls (expansion register 0x0E)
 */
#define BCM_EXP_SYNC_ETHERNET           (MII_BCM54XX_EXP_SEL_ER + 0x0E)
#define BCM_EXP_SYNC_ETHERNET_MII_LITE  BIT(11)

/*
 * BCM5482: Shadow registers
 * Shadow values go into bits [14:10] of register 0x1c to select a shadow
 * register to access.
 */

/* 00100: Reserved control register 2 */
#define BCM54XX_SHD_SCR2                0x04
#define  BCM54XX_SHD_SCR2_WSPD_RTRY_DIS 0x100
#define  BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT   2
#define  BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET  2
#define  BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK    0x7

/* 00101: Spare Control Register 3 */
#define BCM54XX_SHD_SCR3                0x05
#define  BCM54XX_SHD_SCR3_DEF_CLK125    0x0001
#define  BCM54XX_SHD_SCR3_DLLAPD_DIS    0x0002
#define  BCM54XX_SHD_SCR3_TRDDAPD       0x0004
#define  BCM54XX_SHD_SCR3_RXCTXC_DIS    0x0100

/* 01010: Auto Power-Down */
#define BCM54XX_SHD_APD                 0x0a
#define  BCM_APD_CLR_MASK               0xFE9F /* clear bits 5, 6 & 8 */
#define  BCM54XX_SHD_APD_EN             0x0020
#define  BCM_NO_ANEG_APD_EN             0x0060 /* bits 5 & 6 */
#define  BCM_APD_SINGLELP_EN    0x0100 /* Bit 8 */

#define BCM54XX_SHD_LEDS1       0x0d    /* 01101: LED Selector 1 */
                                        /* LED3 / ~LINKSPD[2] selector */
#define BCM54XX_SHD_LEDS_SHIFT(led)     (4 * (led))
#define BCM54XX_SHD_LEDS1_LED3(src)     ((src & 0xf) << 4)
                                        /* LED1 / ~LINKSPD[1] selector */
#define BCM54XX_SHD_LEDS1_LED1(src)     ((src & 0xf) << 0)
#define BCM54XX_SHD_LEDS2       0x0e    /* 01110: LED Selector 2 */
#define BCM54XX_SHD_RGMII_MODE  0x0b    /* 01011: RGMII Mode Selector */
#define BCM5482_SHD_SSD         0x14    /* 10100: Secondary SerDes control */
#define BCM5482_SHD_SSD_LEDM    0x0008  /* SSD LED Mode enable */
#define BCM5482_SHD_SSD_EN      0x0001  /* SSD enable */

/* 10011: SerDes 100-FX Control Register */
#define BCM54616S_SHD_100FX_CTRL        0x13
#define BCM54616S_100FX_MODE            BIT(0)  /* 100-FX SerDes Enable */

/* 11111: Mode Control Register */
#define BCM54XX_SHD_MODE                0x1f
#define BCM54XX_SHD_INTF_SEL_MASK       GENMASK(2, 1)   /* INTERF_SEL[1:0] */
#define BCM54XX_SHD_INTF_SEL_RGMII      0x02
#define BCM54XX_SHD_INTF_SEL_SGMII      0x04
#define BCM54XX_SHD_INTF_SEL_GBIC       0x06
#define BCM54XX_SHD_MODE_1000BX         BIT(0)  /* Enable 1000-X registers */

/*
 * EXPANSION SHADOW ACCESS REGISTERS.  (PHY REG 0x15, 0x16, and 0x17)
 */
#define MII_BCM54XX_EXP_AADJ1CH0                0x001f
#define  MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN  0x0200
#define  MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF    0x0100
#define MII_BCM54XX_EXP_AADJ1CH3                0x601f
#define  MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ      0x0002
#define MII_BCM54XX_EXP_EXP08                   0x0F08
#define  MII_BCM54XX_EXP_EXP08_RJCT_2MHZ        0x0001
#define  MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE   0x0200
#define  MII_BCM54XX_EXP_EXP08_FORCE_DAC_WAKE   0x0100
#define MII_BCM54XX_EXP_EXP75                   0x0f75
#define  MII_BCM54XX_EXP_EXP75_VDACCTRL         0x003c
#define  MII_BCM54XX_EXP_EXP75_CM_OSC           0x0001
#define MII_BCM54XX_EXP_EXP96                   0x0f96
#define  MII_BCM54XX_EXP_EXP96_MYST             0x0010
#define MII_BCM54XX_EXP_EXP97                   0x0f97
#define  MII_BCM54XX_EXP_EXP97_MYST             0x0c0c

/* Top-MISC expansion registers */
#define BCM54XX_TOP_MISC_IDDQ_CTRL              (MII_BCM54XX_EXP_SEL_TOP + 0x06)
#define BCM54XX_TOP_MISC_IDDQ_LP                (1 << 0)
#define BCM54XX_TOP_MISC_IDDQ_SD                (1 << 2)
#define BCM54XX_TOP_MISC_IDDQ_SR                (1 << 3)

#define BCM54XX_TOP_MISC_LED_CTL                (MII_BCM54XX_EXP_SEL_TOP + 0x0C)
#define  BCM54XX_LED4_SEL_INTR                  BIT(1)

/*
 * BCM5482: Secondary SerDes registers
 */
#define BCM5482_SSD_1000BX_CTL          0x00    /* 1000BASE-X Control */
#define BCM5482_SSD_1000BX_CTL_PWRDOWN  0x0800  /* Power-down SSD */
#define BCM5482_SSD_SGMII_SLAVE         0x15    /* SGMII Slave Register */
#define BCM5482_SSD_SGMII_SLAVE_EN      0x0002  /* Slave mode enable */
#define BCM5482_SSD_SGMII_SLAVE_AD      0x0001  /* Slave auto-detection */

/* BroadR-Reach LRE Registers. */
#define MII_BCM54XX_LRECR               0x00    /* LRE Control Register                    */
#define MII_BCM54XX_LRESR               0x01    /* LRE Status Register                     */
#define MII_BCM54XX_LREPHYSID1          0x02    /* LRE PHYS ID 1                           */
#define MII_BCM54XX_LREPHYSID2          0x03    /* LRE PHYS ID 2                           */
#define MII_BCM54XX_LREANAA             0x04    /* LDS Auto-Negotiation Advertised Ability */
#define MII_BCM54XX_LREANAC             0x05    /* LDS Auto-Negotiation Advertised Control */
#define MII_BCM54XX_LREANPT             0x06    /* LDS Ability Next Page Transmit          */
#define MII_BCM54XX_LRELPA              0x07    /* LDS Link Partner Ability                */
#define MII_BCM54XX_LRELPNPM            0x08    /* LDS Link Partner Next Page Message      */
#define MII_BCM54XX_LRELPNPC            0x09    /* LDS Link Partner Next Page Control      */
#define MII_BCM54XX_LRELDSE             0x0a    /* LDS Expansion Register                  */
#define MII_BCM54XX_LREES               0x0f    /* LRE Extended Status                     */

/* LRE control register. */
#define LRECR_RESET                     0x8000  /* Reset to default state      */
#define LRECR_LOOPBACK                  0x4000  /* Internal Loopback           */
#define LRECR_LDSRES                    0x2000  /* Restart LDS Process         */
#define LRECR_LDSEN                     0x1000  /* LDS Enable                  */
#define LRECR_PDOWN                     0x0800  /* Enable low power state      */
#define LRECR_ISOLATE                   0x0400  /* Isolate data paths from MII */
#define LRECR_SPEED100                  0x0200  /* Select 100 Mbps             */
#define LRECR_SPEED10                   0x0000  /* Select 10 Mbps              */
#define LRECR_4PAIRS                    0x0020  /* Select 4 Pairs              */
#define LRECR_2PAIRS                    0x0010  /* Select 2 Pairs              */
#define LRECR_1PAIR                     0x0000  /* Select 1 Pair               */
#define LRECR_MASTER                    0x0008  /* Force Master when LDS disabled */
#define LRECR_SLAVE                     0x0000  /* Force Slave when LDS disabled  */

/* LRE status register. */
#define LRESR_100_1PAIR                 0x2000  /* Can do 100Mbps 1 Pair       */
#define LRESR_100_4PAIR                 0x1000  /* Can do 100Mbps 4 Pairs      */
#define LRESR_100_2PAIR                 0x0800  /* Can do 100Mbps 2 Pairs      */
#define LRESR_10_2PAIR                  0x0400  /* Can do 10Mbps 2 Pairs       */
#define LRESR_10_1PAIR                  0x0200  /* Can do 10Mbps 1 Pair        */
#define LRESR_ESTATEN                   0x0100  /* Extended Status in R15      */
#define LRESR_RESV                      0x0080  /* Unused...                   */
#define LRESR_MFPS                      0x0040  /* Can suppress Management Frames Preamble */
#define LRESR_LDSCOMPLETE               0x0020  /* LDS Auto-negotiation complete */
#define LRESR_8023                      0x0010  /* Has IEEE 802.3 Support      */
#define LRESR_LDSABILITY                0x0008  /* LDS auto-negotiation capable */
#define LRESR_LSTATUS                   0x0004  /* Link status                 */
#define LRESR_JCD                       0x0002  /* Jabber detected             */
#define LRESR_ERCAP                     0x0001  /* Ext-reg capability          */

/* LDS Auto-Negotiation Advertised Ability. */
#define LREANAA_PAUSE_ASYM              0x8000  /* Can pause asymmetrically    */
#define LREANAA_PAUSE                   0x4000  /* Can pause                   */
#define LREANAA_100_1PAIR               0x0020  /* Can do 100Mbps 1 Pair       */
#define LREANAA_100_4PAIR               0x0010  /* Can do 100Mbps 4 Pair       */
#define LREANAA_100_2PAIR               0x0008  /* Can do 100Mbps 2 Pair       */
#define LREANAA_10_2PAIR                0x0004  /* Can do 10Mbps 2 Pair        */
#define LREANAA_10_1PAIR                0x0002  /* Can do 10Mbps 1 Pair        */

#define LRE_ADVERTISE_FULL              (LREANAA_100_1PAIR | LREANAA_100_4PAIR | \
                                         LREANAA_100_2PAIR | LREANAA_10_2PAIR | \
                                         LREANAA_10_1PAIR)

#define LRE_ADVERTISE_ALL               LRE_ADVERTISE_FULL

/* LDS Link Partner Ability. */
#define LRELPA_PAUSE_ASYM               0x8000  /* Supports asymmetric pause   */
#define LRELPA_PAUSE                    0x4000  /* Supports pause capability   */
#define LRELPA_100_1PAIR                0x0020  /* 100Mbps 1 Pair capable      */
#define LRELPA_100_4PAIR                0x0010  /* 100Mbps 4 Pair capable      */
#define LRELPA_100_2PAIR                0x0008  /* 100Mbps 2 Pair capable      */
#define LRELPA_10_2PAIR                 0x0004  /* 10Mbps 2 Pair capable       */
#define LRELPA_10_1PAIR                 0x0002  /* 10Mbps 1 Pair capable       */

/* LDS Expansion register. */
#define LDSE_DOWNGRADE                  0x8000  /* Can do LDS Speed Downgrade  */
#define LDSE_MASTER                     0x4000  /* Master / Slave              */
#define LDSE_PAIRS_MASK                 0x3000  /* Pair Count Mask             */
#define LDSE_PAIRS_SHIFT                12
#define LDSE_4PAIRS                     (2 << LDSE_PAIRS_SHIFT) /* 4 Pairs Connection */
#define LDSE_2PAIRS                     (1 << LDSE_PAIRS_SHIFT) /* 2 Pairs Connection */
#define LDSE_1PAIR                      (0 << LDSE_PAIRS_SHIFT) /* 1 Pair  Connection */
#define LDSE_CABLEN_MASK                0x0FFF  /* Cable Length Mask           */

/* BCM54810 Registers */
#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL    (MII_BCM54XX_EXP_SEL_ER + 0x90)
#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN (1 << 0)
#define BCM54810_SHD_CLK_CTL                    0x3
#define BCM54810_SHD_CLK_CTL_GTXCLK_EN          (1 << 9)

/* BCM54811 Registers */
#define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL (MII_BCM54XX_EXP_SEL_ER + 0x9A)
/* Access Control Override Enable */
#define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL_EN              BIT(15)
/* Access Control Override Value */
#define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL_OVERRIDE_VAL    BIT(14)
/* Access Control Value */
#define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL_VAL             BIT(13)

/* BCM54612E Registers */
#define BCM54612E_EXP_SPARE0            (MII_BCM54XX_EXP_SEL_ETC + 0x34)
#define BCM54612E_LED4_CLK125OUT_EN     (1 << 1)


/* Wake-on-LAN registers */
#define BCM54XX_WOL_MAIN_CTL            (MII_BCM54XX_EXP_SEL_WOL + 0x80)
#define  BCM54XX_WOL_EN                 BIT(0)
#define  BCM54XX_WOL_MODE_SINGLE_MPD    0
#define  BCM54XX_WOL_MODE_SINGLE_MPDSEC 1
#define  BCM54XX_WOL_MODE_DUAL          2
#define  BCM54XX_WOL_MODE_SHIFT         1
#define  BCM54XX_WOL_MODE_MASK          0x3
#define  BCM54XX_WOL_MP_MSB_FF_EN       BIT(3)
#define  BCM54XX_WOL_SECKEY_OPT_4B      0
#define  BCM54XX_WOL_SECKEY_OPT_6B      1
#define  BCM54XX_WOL_SECKEY_OPT_8B      2
#define  BCM54XX_WOL_SECKEY_OPT_SHIFT   4
#define  BCM54XX_WOL_SECKEY_OPT_MASK    0x3
#define  BCM54XX_WOL_L2_TYPE_CHK        BIT(6)
#define  BCM54XX_WOL_L4IPV4UDP_CHK      BIT(7)
#define  BCM54XX_WOL_L4IPV6UDP_CHK      BIT(8)
#define  BCM54XX_WOL_UDPPORT_CHK        BIT(9)
#define  BCM54XX_WOL_CRC_CHK            BIT(10)
#define  BCM54XX_WOL_SECKEY_MODE        BIT(11)
#define  BCM54XX_WOL_RST                BIT(12)
#define  BCM54XX_WOL_DIR_PKT_EN         BIT(13)
#define  BCM54XX_WOL_MASK_MODE_DA_FF    0
#define  BCM54XX_WOL_MASK_MODE_DA_MPD   1
#define  BCM54XX_WOL_MASK_MODE_DA_ONLY  2
#define  BCM54XX_WOL_MASK_MODE_MPD      3
#define  BCM54XX_WOL_MASK_MODE_SHIFT    14
#define  BCM54XX_WOL_MASK_MODE_MASK     0x3

#define BCM54XX_WOL_INNER_PROTO         (MII_BCM54XX_EXP_SEL_WOL + 0x81)
#define BCM54XX_WOL_OUTER_PROTO         (MII_BCM54XX_EXP_SEL_WOL + 0x82)
#define BCM54XX_WOL_OUTER_PROTO2        (MII_BCM54XX_EXP_SEL_WOL + 0x83)

#define BCM54XX_WOL_MPD_DATA1(x)        (MII_BCM54XX_EXP_SEL_WOL + 0x84 + (x))
#define BCM54XX_WOL_MPD_DATA2(x)        (MII_BCM54XX_EXP_SEL_WOL + 0x87 + (x))
#define BCM54XX_WOL_SEC_KEY_8B          (MII_BCM54XX_EXP_SEL_WOL + 0x8A)
#define BCM54XX_WOL_MASK(x)             (MII_BCM54XX_EXP_SEL_WOL + 0x8B + (x))
#define BCM54XX_SEC_KEY_STORE(x)        (MII_BCM54XX_EXP_SEL_WOL + 0x8E)
#define BCM54XX_WOL_SHARED_CNT          (MII_BCM54XX_EXP_SEL_WOL + 0x92)

#define BCM54XX_WOL_INT_MASK            (MII_BCM54XX_EXP_SEL_WOL + 0x93)
#define  BCM54XX_WOL_PKT1               BIT(0)
#define  BCM54XX_WOL_PKT2               BIT(1)
#define  BCM54XX_WOL_DIR                BIT(2)
#define  BCM54XX_WOL_ALL_INTRS          (BCM54XX_WOL_PKT1 | \
                                         BCM54XX_WOL_PKT2 | \
                                         BCM54XX_WOL_DIR)

#define BCM54XX_WOL_INT_STATUS          (MII_BCM54XX_EXP_SEL_WOL + 0x94)

/* BCM5221 Registers */
#define BCM5221_AEGSR                   0x1C
#define BCM5221_AEGSR_MDIX_STATUS       BIT(13)
#define BCM5221_AEGSR_MDIX_MAN_SWAP     BIT(12)
#define BCM5221_AEGSR_MDIX_DIS          BIT(11)

#define BCM5221_SHDW_AM4_EN_CLK_LPM     BIT(2)
#define BCM5221_SHDW_AM4_FORCE_LPM      BIT(1)

/*****************************************************************************/
/* Fast Ethernet Transceiver definitions. */
/*****************************************************************************/

#define MII_BRCM_FET_INTREG             0x1a    /* Interrupt register */
#define MII_BRCM_FET_IR_MASK            0x0100  /* Mask all interrupts */
#define MII_BRCM_FET_IR_LINK_EN         0x0200  /* Link status change enable */
#define MII_BRCM_FET_IR_SPEED_EN        0x0400  /* Link speed change enable */
#define MII_BRCM_FET_IR_DUPLEX_EN       0x0800  /* Duplex mode change enable */
#define MII_BRCM_FET_IR_ENABLE          0x4000  /* Interrupt enable */

#define MII_BRCM_FET_BRCMTEST           0x1f    /* Brcm test register */
#define MII_BRCM_FET_BT_SRE             0x0080  /* Shadow register enable */


/*** Shadow register definitions ***/

#define MII_BRCM_FET_SHDW_MISCCTRL      0x10    /* Shadow misc ctrl */
#define MII_BRCM_FET_SHDW_MC_FAME       0x4000  /* Force Auto MDIX enable */

#define MII_BRCM_FET_SHDW_AUXMODE4      0x1a    /* Auxiliary mode 4 */
#define MII_BRCM_FET_SHDW_AM4_STANDBY   0x0008  /* Standby enable */
#define MII_BRCM_FET_SHDW_AM4_LED_MASK  0x0003
#define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001

#define MII_BRCM_FET_SHDW_AUXSTAT2      0x1b    /* Auxiliary status 2 */
#define MII_BRCM_FET_SHDW_AS2_APDE      0x0020  /* Auto power down enable */

#define BRCM_CL45VEN_EEE_CONTROL        0x803d
#define LPI_FEATURE_EN                  0x8000
#define LPI_FEATURE_EN_DIG1000X         0x4000

#define BRCM_CL45VEN_EEE_LPI_CNT        0x803f

/* Core register definitions*/
#define MII_BRCM_CORE_BASE12    0x12
#define MII_BRCM_CORE_BASE13    0x13
#define MII_BRCM_CORE_BASE14    0x14
#define MII_BRCM_CORE_BASE1E    0x1E
#define MII_BRCM_CORE_EXPB0     0xB0
#define MII_BRCM_CORE_EXPB1     0xB1

/* Enhanced Cable Diagnostics */
#define BCM54XX_RDB_ECD_CTRL                    0x2a0
#define BCM54XX_EXP_ECD_CTRL                    (MII_BCM54XX_EXP_SEL_ER + 0xc0)

#define BCM54XX_ECD_CTRL_CABLE_TYPE_CAT3        1       /* CAT3 or worse */
#define BCM54XX_ECD_CTRL_CABLE_TYPE_CAT5        0       /* CAT5 or better */
#define BCM54XX_ECD_CTRL_CABLE_TYPE_MASK        BIT(0)  /* cable type */
#define BCM54XX_ECD_CTRL_INVALID                BIT(3)  /* invalid result */
#define BCM54XX_ECD_CTRL_UNIT_CM                0       /* centimeters */
#define BCM54XX_ECD_CTRL_UNIT_M                 1       /* meters */
#define BCM54XX_ECD_CTRL_UNIT_MASK              BIT(10) /* cable length unit */
#define BCM54XX_ECD_CTRL_IN_PROGRESS            BIT(11) /* test in progress */
#define BCM54XX_ECD_CTRL_BREAK_LINK             BIT(12) /* unconnect link
                                                         * during test
                                                         */
#define BCM54XX_ECD_CTRL_CROSS_SHORT_DIS        BIT(13) /* disable inter-pair
                                                         * short check
                                                         */
#define BCM54XX_ECD_CTRL_RUN                    BIT(15) /* run immediate */

#define BCM54XX_RDB_ECD_FAULT_TYPE              0x2a1
#define BCM54XX_EXP_ECD_FAULT_TYPE              (MII_BCM54XX_EXP_SEL_ER + 0xc1)
#define BCM54XX_ECD_FAULT_TYPE_INVALID          0x0
#define BCM54XX_ECD_FAULT_TYPE_OK               0x1
#define BCM54XX_ECD_FAULT_TYPE_OPEN             0x2
#define BCM54XX_ECD_FAULT_TYPE_SAME_SHORT       0x3 /* short same pair */
#define BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT      0x4 /* short different pairs */
#define BCM54XX_ECD_FAULT_TYPE_BUSY             0x9
#define BCM54XX_ECD_FAULT_TYPE_PAIR_D_MASK      GENMASK(3, 0)
#define BCM54XX_ECD_FAULT_TYPE_PAIR_C_MASK      GENMASK(7, 4)
#define BCM54XX_ECD_FAULT_TYPE_PAIR_B_MASK      GENMASK(11, 8)
#define BCM54XX_ECD_FAULT_TYPE_PAIR_A_MASK      GENMASK(15, 12)
#define BCM54XX_ECD_PAIR_A_LENGTH_RESULTS       0x2a2
#define BCM54XX_ECD_PAIR_B_LENGTH_RESULTS       0x2a3
#define BCM54XX_ECD_PAIR_C_LENGTH_RESULTS       0x2a4
#define BCM54XX_ECD_PAIR_D_LENGTH_RESULTS       0x2a5

#define BCM54XX_RDB_ECD_PAIR_A_LENGTH_RESULTS   0x2a2
#define BCM54XX_EXP_ECD_PAIR_A_LENGTH_RESULTS   (MII_BCM54XX_EXP_SEL_ER + 0xc2)
#define BCM54XX_RDB_ECD_PAIR_B_LENGTH_RESULTS   0x2a3
#define BCM54XX_EXP_ECD_PAIR_B_LENGTH_RESULTS   (MII_BCM54XX_EXP_SEL_ER + 0xc3)
#define BCM54XX_RDB_ECD_PAIR_C_LENGTH_RESULTS   0x2a4
#define BCM54XX_EXP_ECD_PAIR_C_LENGTH_RESULTS   (MII_BCM54XX_EXP_SEL_ER + 0xc4)
#define BCM54XX_RDB_ECD_PAIR_D_LENGTH_RESULTS   0x2a5
#define BCM54XX_EXP_ECD_PAIR_D_LENGTH_RESULTS   (MII_BCM54XX_EXP_SEL_ER + 0xc5)
#define BCM54XX_ECD_LENGTH_RESULTS_INVALID      0xffff

#endif /* _LINUX_BRCMPHY_H */