// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Freescale MPC85xx/MPC86xx RapidIO support
 *
 * Copyright 2009 Sysgo AG
 * Thomas Moll <thomas.moll@sysgo.com>
 * - fixed maintenance access routines, check for aligned access
 *
 * Copyright 2009 Integrated Device Technology, Inc.
 * Alex Bounine <alexandre.bounine@idt.com>
 * - Added Port-Write message handling
 * - Added Machine Check exception handling
 *
 * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
 * Zhang Wei <wei.zhang@freescale.com>
 *
 * Copyright 2005 MontaVista Software, Inc.
 * Matt Porter <mporter@kernel.crashing.org>
 */

#include <linux/init.h>
#include <linux/extable.h>
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/slab.h>

#include <linux/io.h>
#include <linux/uaccess.h>
#include <asm/machdep.h>
#include <asm/rio.h>

#include "fsl_rio.h"

#undef DEBUG_PW /* Port-Write debugging */

#define RIO_PORT1_EDCSR         0x0640
#define RIO_PORT2_EDCSR         0x0680
#define RIO_PORT1_IECSR         0x10130
#define RIO_PORT2_IECSR         0x101B0

#define RIO_GCCSR               0x13c
#define RIO_ESCSR               0x158
#define ESCSR_CLEAR             0x07120204
#define RIO_PORT2_ESCSR         0x178
#define RIO_CCSR                0x15c
#define RIO_LTLEDCSR_IER        0x80000000
#define RIO_LTLEDCSR_PRT        0x01000000
#define IECSR_CLEAR             0x80000000
#define RIO_ISR_AACR            0x10120
#define RIO_ISR_AACR_AA         0x1     /* Accept All ID */

#define RIWTAR_TRAD_VAL_SHIFT   12
#define RIWTAR_TRAD_MASK        0x00FFFFFF
#define RIWBAR_BADD_VAL_SHIFT   12
#define RIWBAR_BADD_MASK        0x003FFFFF
#define RIWAR_ENABLE            0x80000000
#define RIWAR_TGINT_LOCAL       0x00F00000
#define RIWAR_RDTYP_NO_SNOOP    0x00040000
#define RIWAR_RDTYP_SNOOP       0x00050000
#define RIWAR_WRTYP_NO_SNOOP    0x00004000
#define RIWAR_WRTYP_SNOOP       0x00005000
#define RIWAR_WRTYP_ALLOC       0x00006000
#define RIWAR_SIZE_MASK         0x0000003F

static DEFINE_SPINLOCK(fsl_rio_config_lock);

#define ___fsl_read_rio_config(x, addr, err, op, barrier)       \
        __asm__ __volatile__(                           \
                "1:     "op" %1,0(%2)\n"                \
                "       "barrier"\n"                    \
                "2:\n"                                  \
                ".section .fixup,\"ax\"\n"              \
                "3:     li %1,-1\n"                     \
                "       li %0,%3\n"                     \
                "       b 2b\n"                         \
                ".previous\n"                           \
                EX_TABLE(1b, 3b)                        \
                : "=r" (err), "=r" (x)                  \
                : "b" (addr), "i" (-EFAULT), "0" (err))

#ifdef CONFIG_BOOKE
#define __fsl_read_rio_config(x, addr, err, op) \
        ___fsl_read_rio_config(x, addr, err, op, "mbar")
#else
#define __fsl_read_rio_config(x, addr, err, op) \
        ___fsl_read_rio_config(x, addr, err, op, "eieio")
#endif

void __iomem *rio_regs_win;
void __iomem *rmu_regs_win;
resource_size_t rio_law_start;

struct fsl_rio_dbell *dbell;
struct fsl_rio_pw *pw;

#ifdef CONFIG_PPC_E500
int fsl_rio_mcheck_exception(struct pt_regs *regs)
{
        const struct exception_table_entry *entry;
        unsigned long reason;

        if (!rio_regs_win)
                return 0;

        reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR));
        if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) {
                /* Check if we are prepared to handle this fault */
                entry = search_exception_tables(regs->nip);
                if (entry) {
                        pr_debug("RIO: %s - MC Exception handled\n",
                                 __func__);
                        out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR),
                                 0);
                        regs_set_recoverable(regs);
                        regs_set_return_ip(regs, extable_fixup(entry));
                        return 1;
                }
        }

        return 0;
}
EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception);
#endif

/**
 * fsl_local_config_read - Generate a MPC85xx local config space read
 * @mport: RapidIO master port info
 * @index: ID of RapdiIO interface
 * @offset: Offset into configuration space
 * @len: Length (in bytes) of the maintenance transaction
 * @data: Value to be read into
 *
 * Generates a MPC85xx local configuration space read. Returns %0 on
 * success or %-EINVAL on failure.
 */
static int fsl_local_config_read(struct rio_mport *mport,
                                int index, u32 offset, int len, u32 *data)
{
        struct rio_priv *priv = mport->priv;
        pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index,
                 offset);
        *data = in_be32(priv->regs_win + offset);

        return 0;
}

/**
 * fsl_local_config_write - Generate a MPC85xx local config space write
 * @mport: RapidIO master port info
 * @index: ID of RapdiIO interface
 * @offset: Offset into configuration space
 * @len: Length (in bytes) of the maintenance transaction
 * @data: Value to be written
 *
 * Generates a MPC85xx local configuration space write. Returns %0 on
 * success or %-EINVAL on failure.
 */
static int fsl_local_config_write(struct rio_mport *mport,
                                int index, u32 offset, int len, u32 data)
{
        struct rio_priv *priv = mport->priv;
        pr_debug
                ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
                index, offset, data);
        out_be32(priv->regs_win + offset, data);

        return 0;
}

/**
 * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction
 * @mport: RapidIO master port info
 * @index: ID of RapdiIO interface
 * @destid: Destination ID of transaction
 * @hopcount: Number of hops to target device
 * @offset: Offset into configuration space
 * @len: Length (in bytes) of the maintenance transaction
 * @val: Location to be read into
 *
 * Generates a MPC85xx read maintenance transaction. Returns %0 on
 * success or %-EINVAL on failure.
 */
static int
fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
                        u8 hopcount, u32 offset, int len, u32 *val)
{
        struct rio_priv *priv = mport->priv;
        unsigned long flags;
        u8 *data;
        u32 rval, err = 0;

        pr_debug
                ("fsl_rio_config_read:"
                " index %d destid %d hopcount %d offset %8.8x len %d\n",
                index, destid, hopcount, offset, len);

        /* 16MB maintenance window possible */
        /* allow only aligned access to maintenance registers */
        if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
                return -EINVAL;

        spin_lock_irqsave(&fsl_rio_config_lock, flags);

        out_be32(&priv->maint_atmu_regs->rowtar,
                 (destid << 22) | (hopcount << 12) | (offset >> 12));
        out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));

        data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
        switch (len) {
        case 1:
                __fsl_read_rio_config(rval, data, err, "lbz");
                break;
        case 2:
                __fsl_read_rio_config(rval, data, err, "lhz");
                break;
        case 4:
                __fsl_read_rio_config(rval, data, err, "lwz");
                break;
        default:
                spin_unlock_irqrestore(&fsl_rio_config_lock, flags);
                return -EINVAL;
        }

        if (err) {
                pr_debug("RIO: cfg_read error %d for %x:%x:%x\n",
                         err, destid, hopcount, offset);
        }

        spin_unlock_irqrestore(&fsl_rio_config_lock, flags);
        *val = rval;

        return err;
}

/**
 * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction
 * @mport: RapidIO master port info
 * @index: ID of RapdiIO interface
 * @destid: Destination ID of transaction
 * @hopcount: Number of hops to target device
 * @offset: Offset into configuration space
 * @len: Length (in bytes) of the maintenance transaction
 * @val: Value to be written
 *
 * Generates an MPC85xx write maintenance transaction. Returns %0 on
 * success or %-EINVAL on failure.
 */
static int
fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
                        u8 hopcount, u32 offset, int len, u32 val)
{
        struct rio_priv *priv = mport->priv;
        unsigned long flags;
        u8 *data;
        int ret = 0;

        pr_debug
                ("fsl_rio_config_write:"
                " index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
                index, destid, hopcount, offset, len, val);

        /* 16MB maintenance windows possible */
        /* allow only aligned access to maintenance registers */
        if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
                return -EINVAL;

        spin_lock_irqsave(&fsl_rio_config_lock, flags);

        out_be32(&priv->maint_atmu_regs->rowtar,
                 (destid << 22) | (hopcount << 12) | (offset >> 12));
        out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));

        data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
        switch (len) {
        case 1:
                out_8((u8 *) data, val);
                break;
        case 2:
                out_be16((u16 *) data, val);
                break;
        case 4:
                out_be32((u32 *) data, val);
                break;
        default:
                ret = -EINVAL;
        }
        spin_unlock_irqrestore(&fsl_rio_config_lock, flags);

        return ret;
}

static void fsl_rio_inbound_mem_init(struct rio_priv *priv)
{
        int i;

        /* close inbound windows */
        for (i = 0; i < RIO_INB_ATMU_COUNT; i++)
                out_be32(&priv->inb_atmu_regs[i].riwar, 0);
}

static int fsl_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
                           u64 rstart, u64 size, u32 flags)
{
        struct rio_priv *priv = mport->priv;
        u32 base_size;
        unsigned int base_size_log;
        u64 win_start, win_end;
        u32 riwar;
        int i;

        if ((size & (size - 1)) != 0 || size > 0x400000000ULL)
                return -EINVAL;

        base_size_log = ilog2(size);
        base_size = 1 << base_size_log;

        /* check if addresses are aligned with the window size */
        if (lstart & (base_size - 1))
                return -EINVAL;
        if (rstart & (base_size - 1))
                return -EINVAL;

        /* check for conflicting ranges */
        for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
                riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
                if ((riwar & RIWAR_ENABLE) == 0)
                        continue;
                win_start = ((u64)(in_be32(&priv->inb_atmu_regs[i].riwbar) & RIWBAR_BADD_MASK))
                        << RIWBAR_BADD_VAL_SHIFT;
                win_end = win_start + ((1 << ((riwar & RIWAR_SIZE_MASK) + 1)) - 1);
                if (rstart < win_end && (rstart + size) > win_start)
                        return -EINVAL;
        }

        /* find unused atmu */
        for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
                riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
                if ((riwar & RIWAR_ENABLE) == 0)
                        break;
        }
        if (i >= RIO_INB_ATMU_COUNT)
                return -ENOMEM;

        out_be32(&priv->inb_atmu_regs[i].riwtar, lstart >> RIWTAR_TRAD_VAL_SHIFT);
        out_be32(&priv->inb_atmu_regs[i].riwbar, rstart >> RIWBAR_BADD_VAL_SHIFT);
        out_be32(&priv->inb_atmu_regs[i].riwar, RIWAR_ENABLE | RIWAR_TGINT_LOCAL |
                RIWAR_RDTYP_SNOOP | RIWAR_WRTYP_SNOOP | (base_size_log - 1));

        return 0;
}

static void fsl_unmap_inb_mem(struct rio_mport *mport, dma_addr_t lstart)
{
        u32 win_start_shift, base_start_shift;
        struct rio_priv *priv = mport->priv;
        u32 riwar, riwtar;
        int i;

        /* skip default window */
        base_start_shift = lstart >> RIWTAR_TRAD_VAL_SHIFT;
        for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
                riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
                if ((riwar & RIWAR_ENABLE) == 0)
                        continue;

                riwtar = in_be32(&priv->inb_atmu_regs[i].riwtar);
                win_start_shift = riwtar & RIWTAR_TRAD_MASK;
                if (win_start_shift == base_start_shift) {
                        out_be32(&priv->inb_atmu_regs[i].riwar, riwar & ~RIWAR_ENABLE);
                        return;
                }
        }
}

void fsl_rio_port_error_handler(int offset)
{
        /*XXX: Error recovery is not implemented, we just clear errors */
        out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);

        if (offset == 0) {
                out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0);
                out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR);
                out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR);
        } else {
                out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0);
                out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR);
                out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
        }
}
static inline void fsl_rio_info(struct device *dev, u32 ccsr)
{
        const char *str;
        if (ccsr & 1) {
                /* Serial phy */
                switch (ccsr >> 30) {
                case 0:
                        str = "1";
                        break;
                case 1:
                        str = "4";
                        break;
                default:
                        str = "Unknown";
                        break;
                }
                dev_info(dev, "Hardware port width: %s\n", str);

                switch ((ccsr >> 27) & 7) {
                case 0:
                        str = "Single-lane 0";
                        break;
                case 1:
                        str = "Single-lane 2";
                        break;
                case 2:
                        str = "Four-lane";
                        break;
                default:
                        str = "Unknown";
                        break;
                }
                dev_info(dev, "Training connection status: %s\n", str);
        } else {
                /* Parallel phy */
                if (!(ccsr & 0x80000000))
                        dev_info(dev, "Output port operating in 8-bit mode\n");
                if (!(ccsr & 0x08000000))
                        dev_info(dev, "Input port operating in 8-bit mode\n");
        }
}

/**
 * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
 * @dev: platform_device pointer
 *
 * Initializes MPC85xx RapidIO hardware interface, configures
 * master port with system-specific info, and registers the
 * master port with the RapidIO subsystem.
 */
static int fsl_rio_setup(struct platform_device *dev)
{
        struct rio_ops *ops;
        struct rio_mport *port;
        struct rio_priv *priv;
        int rc = 0;
        const u32 *port_index;
        u32 active_ports = 0;
        struct device_node *np, *rmu_node;
        u32 ccsr;
        u64 range_start;
        u32 i;
        static int tmp;
        struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL};

        if (!dev->dev.of_node) {
                dev_err(&dev->dev, "Device OF-Node is NULL");
                return -ENODEV;
        }

        rio_regs_win = of_iomap(dev->dev.of_node, 0);
        if (!rio_regs_win) {
                dev_err(&dev->dev, "Unable to map rio register window\n");
                rc = -ENOMEM;
                goto err_rio_regs;
        }

        ops = kzalloc_obj(struct rio_ops);
        if (!ops) {
                rc = -ENOMEM;
                goto err_ops;
        }
        ops->lcread = fsl_local_config_read;
        ops->lcwrite = fsl_local_config_write;
        ops->cread = fsl_rio_config_read;
        ops->cwrite = fsl_rio_config_write;
        ops->dsend = fsl_rio_doorbell_send;
        ops->pwenable = fsl_rio_pw_enable;
        ops->open_outb_mbox = fsl_open_outb_mbox;
        ops->open_inb_mbox = fsl_open_inb_mbox;
        ops->close_outb_mbox = fsl_close_outb_mbox;
        ops->close_inb_mbox = fsl_close_inb_mbox;
        ops->add_outb_message = fsl_add_outb_message;
        ops->add_inb_buffer = fsl_add_inb_buffer;
        ops->get_inb_message = fsl_get_inb_message;
        ops->map_inb = fsl_map_inb_mem;
        ops->unmap_inb = fsl_unmap_inb_mem;

        rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0);
        if (!rmu_node) {
                dev_err(&dev->dev, "No valid fsl,srio-rmu-handle property\n");
                rc = -ENOENT;
                goto err_rmu;
        }
        rmu_regs_win = of_iomap(rmu_node, 0);

        of_node_put(rmu_node);
        if (!rmu_regs_win) {
                dev_err(&dev->dev, "Unable to map rmu register window\n");
                rc = -ENOMEM;
                goto err_rmu;
        }
        for_each_compatible_node(np, NULL, "fsl,srio-msg-unit") {
                rmu_np[tmp] = np;
                tmp++;
        }

        /*set up doobell node*/
        np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit");
        if (!np) {
                dev_err(&dev->dev, "No fsl,srio-dbell-unit node\n");
                rc = -ENODEV;
                goto err_dbell;
        }
        dbell = kzalloc_obj(struct fsl_rio_dbell);
        if (!(dbell)) {
                dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_dbell'\n");
                rc = -ENOMEM;
                goto err_dbell;
        }
        dbell->dev = &dev->dev;
        dbell->bellirq = irq_of_parse_and_map(np, 1);
        dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq);

        if (of_property_read_reg(np, 0, &range_start, NULL)) {
                pr_err("%pOF: unable to find 'reg' property\n",
                        np);
                rc = -ENOMEM;
                goto err_pw;
        }
        dbell->dbell_regs = (struct rio_dbell_regs *)(rmu_regs_win +
                                (u32)range_start);

        /*set up port write node*/
        np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit");
        if (!np) {
                dev_err(&dev->dev, "No fsl,srio-port-write-unit node\n");
                rc = -ENODEV;
                goto err_pw;
        }
        pw = kzalloc_obj(struct fsl_rio_pw);
        if (!(pw)) {
                dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_pw'\n");
                rc = -ENOMEM;
                goto err_pw;
        }
        pw->dev = &dev->dev;
        pw->pwirq = irq_of_parse_and_map(np, 0);
        dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq);
        if (of_property_read_reg(np, 0, &range_start, NULL)) {
                pr_err("%pOF: unable to find 'reg' property\n",
                        np);
                rc = -ENOMEM;
                goto err;
        }
        pw->pw_regs = (struct rio_pw_regs *)(rmu_regs_win + (u32)range_start);

        /*set up ports node*/
        for_each_child_of_node(dev->dev.of_node, np) {
                struct resource res;

                port_index = of_get_property(np, "cell-index", NULL);
                if (!port_index) {
                        dev_err(&dev->dev, "Can't get %pOF property 'cell-index'\n",
                                        np);
                        continue;
                }

                if (of_range_to_resource(np, 0, &res)) {
                        dev_err(&dev->dev, "Can't get %pOF property 'ranges'\n",
                                        np);
                        continue;
                }

                dev_info(&dev->dev, "%pOF: LAW %pR\n",
                                np, &res);

                port = kzalloc_obj(struct rio_mport);
                if (!port)
                        continue;

                rc = rio_mport_initialize(port);
                if (rc) {
                        kfree(port);
                        continue;
                }

                i = *port_index - 1;
                port->index = (unsigned char)i;

                priv = kzalloc_obj(struct rio_priv);
                if (!priv) {
                        dev_err(&dev->dev, "Can't alloc memory for 'priv'\n");
                        kfree(port);
                        continue;
                }

                INIT_LIST_HEAD(&port->dbells);
                port->iores = res;      /* struct copy */
                port->iores.name = "rio_io_win";

                if (request_resource(&iomem_resource, &port->iores) < 0) {
                        dev_err(&dev->dev, "RIO: Error requesting master port region"
                                " 0x%016llx-0x%016llx\n",
                                (u64)port->iores.start, (u64)port->iores.end);
                                kfree(priv);
                                kfree(port);
                                continue;
                }
                sprintf(port->name, "RIO mport %d", i);

                priv->dev = &dev->dev;
                port->dev.parent = &dev->dev;
                port->ops = ops;
                port->priv = priv;
                port->phys_efptr = 0x100;
                port->phys_rmap = 1;
                priv->regs_win = rio_regs_win;

                ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20);

                /* Checking the port training status */
                if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) {
                        dev_err(&dev->dev, "Port %d is not ready. "
                        "Try to restart connection...\n", i);
                        /* Disable ports */
                        out_be32(priv->regs_win
                                + RIO_CCSR + i*0x20, 0);
                        /* Set 1x lane */
                        setbits32(priv->regs_win
                                + RIO_CCSR + i*0x20, 0x02000000);
                        /* Enable ports */
                        setbits32(priv->regs_win
                                + RIO_CCSR + i*0x20, 0x00600000);
                        msleep(100);
                        if (in_be32((priv->regs_win
                                        + RIO_ESCSR + i*0x20)) & 1) {
                                dev_err(&dev->dev,
                                        "Port %d restart failed.\n", i);
                                release_resource(&port->iores);
                                kfree(priv);
                                kfree(port);
                                continue;
                        }
                        dev_info(&dev->dev, "Port %d restart success!\n", i);
                }
                fsl_rio_info(&dev->dev, ccsr);

                port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
                                        & RIO_PEF_CTLS) >> 4;
                dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
                                port->sys_size ? 65536 : 256);

                if (port->host_deviceid >= 0)
                        out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
                                RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
                else
                        out_be32(priv->regs_win + RIO_GCCSR,
                                RIO_PORT_GEN_MASTER);

                priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
                        + ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET :
                        RIO_ATMU_REGS_PORT2_OFFSET));

                priv->maint_atmu_regs = priv->atmu_regs + 1;
                priv->inb_atmu_regs = (struct rio_inb_atmu_regs __iomem *)
                        (priv->regs_win +
                        ((i == 0) ? RIO_INB_ATMU_REGS_PORT1_OFFSET :
                        RIO_INB_ATMU_REGS_PORT2_OFFSET));

                /* Set to receive packets with any dest ID */
                out_be32((priv->regs_win + RIO_ISR_AACR + i*0x80),
                         RIO_ISR_AACR_AA);

                /* Configure maintenance transaction window */
                out_be32(&priv->maint_atmu_regs->rowbar,
                        port->iores.start >> 12);
                out_be32(&priv->maint_atmu_regs->rowar,
                         0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));

                priv->maint_win = ioremap(port->iores.start,
                                RIO_MAINT_WIN_SIZE);

                rio_law_start = range_start;

                fsl_rio_setup_rmu(port, rmu_np[i]);
                fsl_rio_inbound_mem_init(priv);

                dbell->mport[i] = port;
                pw->mport[i] = port;

                if (rio_register_mport(port)) {
                        release_resource(&port->iores);
                        kfree(priv);
                        kfree(port);
                        continue;
                }
                active_ports++;
        }

        if (!active_ports) {
                rc = -ENOLINK;
                goto err;
        }

        fsl_rio_doorbell_init(dbell);
        fsl_rio_port_write_init(pw);

        return 0;
err:
        kfree(pw);
        pw = NULL;
err_pw:
        kfree(dbell);
        dbell = NULL;
err_dbell:
        iounmap(rmu_regs_win);
        rmu_regs_win = NULL;
err_rmu:
        kfree(ops);
err_ops:
        iounmap(rio_regs_win);
        rio_regs_win = NULL;
err_rio_regs:
        return rc;
}

/* The probe function for RapidIO peer-to-peer network.
 */
static int fsl_of_rio_rpn_probe(struct platform_device *dev)
{
        printk(KERN_INFO "Setting up RapidIO peer-to-peer network %pOF\n",
                        dev->dev.of_node);

        return fsl_rio_setup(dev);
};

static const struct of_device_id fsl_of_rio_rpn_ids[] = {
        {
                .compatible = "fsl,srio",
        },
        {},
};

static struct platform_driver fsl_of_rio_rpn_driver = {
        .driver = {
                .name = "fsl-of-rio",
                .of_match_table = fsl_of_rio_rpn_ids,
        },
        .probe = fsl_of_rio_rpn_probe,
};

static __init int fsl_of_rio_rpn_init(void)
{
        return platform_driver_register(&fsl_of_rio_rpn_driver);
}

subsys_initcall(fsl_of_rio_rpn_init);