// SPDX-License-Identifier: GPL-2.0-only
/*
 *  linux/arch/arm/mach-sa1100/ssp.c
 *
 *  Copyright (C) 2003 Russell King.
 *
 *  Generic SSP driver.  This provides the generic core for simple
 *  IO-based SSP applications.
 */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/io.h>

#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/hardware/ssp.h>

#define TIMEOUT 100000

static irqreturn_t ssp_interrupt(int irq, void *dev_id)
{
        unsigned int status = Ser4SSSR;

        if (status & SSSR_ROR)
                printk(KERN_WARNING "SSP: receiver overrun\n");

        Ser4SSSR = SSSR_ROR;

        return status ? IRQ_HANDLED : IRQ_NONE;
}

/**
 * ssp_write_word - write a word to the SSP port
 * @data: 16-bit, MSB justified data to write.
 *
 * Wait for a free entry in the SSP transmit FIFO, and write a data
 * word to the SSP port.  Wait for the SSP port to start sending
 * the data.
 *
 * The caller is expected to perform the necessary locking.
 *
 * Returns:
 *   %-ETIMEDOUT        timeout occurred
 *   0                  success
 */
int ssp_write_word(u16 data)
{
        int timeout = TIMEOUT;

        while (!(Ser4SSSR & SSSR_TNF)) {
                if (!--timeout)
                        return -ETIMEDOUT;
                cpu_relax();
        }

        Ser4SSDR = data;

        timeout = TIMEOUT;
        while (!(Ser4SSSR & SSSR_BSY)) {
                if (!--timeout)
                        return -ETIMEDOUT;
                cpu_relax();
        }

        return 0;
}

/**
 * ssp_read_word - read a word from the SSP port
 *
 * Wait for a data word in the SSP receive FIFO, and return the
 * received data.  Data is LSB justified.
 *
 * Note: Currently, if data is not expected to be received, this
 * function will wait for ever.
 *
 * The caller is expected to perform the necessary locking.
 *
 * Returns:
 *   %-ETIMEDOUT        timeout occurred
 *   16-bit data        success
 */
int ssp_read_word(u16 *data)
{
        int timeout = TIMEOUT;

        while (!(Ser4SSSR & SSSR_RNE)) {
                if (!--timeout)
                        return -ETIMEDOUT;
                cpu_relax();
        }

        *data = (u16)Ser4SSDR;

        return 0;
}

/**
 * ssp_flush - flush the transmit and receive FIFOs
 *
 * Wait for the SSP to idle, and ensure that the receive FIFO
 * is empty.
 *
 * The caller is expected to perform the necessary locking.
 *
 * Returns:
 *   %-ETIMEDOUT        timeout occurred
 *   0                  success
 */
int ssp_flush(void)
{
        int timeout = TIMEOUT * 2;

        do {
                while (Ser4SSSR & SSSR_RNE) {
                        if (!--timeout)
                                return -ETIMEDOUT;
                        (void) Ser4SSDR;
                }
                if (!--timeout)
                        return -ETIMEDOUT;
        } while (Ser4SSSR & SSSR_BSY);

        return 0;
}

/**
 * ssp_enable - enable the SSP port
 *
 * Turn on the SSP port.
 */
void ssp_enable(void)
{
        Ser4SSCR0 |= SSCR0_SSE;
}

/**
 * ssp_disable - shut down the SSP port
 *
 * Turn off the SSP port, optionally powering it down.
 */
void ssp_disable(void)
{
        Ser4SSCR0 &= ~SSCR0_SSE;
}

/**
 * ssp_save_state - save the SSP configuration
 * @ssp: pointer to structure to save SSP configuration
 *
 * Save the configured SSP state for suspend.
 */
void ssp_save_state(struct ssp_state *ssp)
{
        ssp->cr0 = Ser4SSCR0;
        ssp->cr1 = Ser4SSCR1;

        Ser4SSCR0 &= ~SSCR0_SSE;
}

/**
 * ssp_restore_state - restore a previously saved SSP configuration
 * @ssp: pointer to configuration saved by ssp_save_state
 *
 * Restore the SSP configuration saved previously by ssp_save_state.
 */
void ssp_restore_state(struct ssp_state *ssp)
{
        Ser4SSSR = SSSR_ROR;

        Ser4SSCR0 = ssp->cr0 & ~SSCR0_SSE;
        Ser4SSCR1 = ssp->cr1;
        Ser4SSCR0 = ssp->cr0;
}

/**
 * ssp_init - setup the SSP port
 *
 * initialise and claim resources for the SSP port.
 *
 * Returns:
 *   %-ENODEV   if the SSP port is unavailable
 *   %-EBUSY    if the resources are already in use
 *   %0         on success
 */
int ssp_init(void)
{
        int ret;

        if (!(PPAR & PPAR_SPR) && (Ser4MCCR0 & MCCR0_MCE))
                return -ENODEV;

        if (!request_mem_region(__PREG(Ser4SSCR0), 0x18, "SSP")) {
                return -EBUSY;
        }

        Ser4SSSR = SSSR_ROR;

        ret = request_irq(IRQ_Ser4SSP, ssp_interrupt, 0, "SSP", NULL);
        if (ret)
                goto out_region;

        return 0;

 out_region:
        release_mem_region(__PREG(Ser4SSCR0), 0x18);
        return ret;
}

/**
 * ssp_exit - undo the effects of ssp_init
 *
 * release and free resources for the SSP port.
 */
void ssp_exit(void)
{
        Ser4SSCR0 &= ~SSCR0_SSE;

        free_irq(IRQ_Ser4SSP, NULL);
        release_mem_region(__PREG(Ser4SSCR0), 0x18);
}

MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("SA11x0 SSP PIO driver");
MODULE_LICENSE("GPL");

EXPORT_SYMBOL(ssp_write_word);
EXPORT_SYMBOL(ssp_read_word);
EXPORT_SYMBOL(ssp_flush);
EXPORT_SYMBOL(ssp_enable);
EXPORT_SYMBOL(ssp_disable);
EXPORT_SYMBOL(ssp_save_state);
EXPORT_SYMBOL(ssp_restore_state);
EXPORT_SYMBOL(ssp_init);
EXPORT_SYMBOL(ssp_exit);