IWL_WARN
IWL_WARN(priv, "Not sending command - %s KILL\n",
IWL_WARN(priv, "Try to add interface when device not ready\n");
IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
IWL_WARN(priv, "Invalid error table during resume!\n");
IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
IWL_WARN(priv,
IWL_WARN(priv,
IWL_WARN(priv, "check 2.4G: wrong narrow\n");
IWL_WARN(priv, "check 2.4G: wrong radar\n");
IWL_WARN(priv, "check 5.2G: not short slot!\n");
IWL_WARN(priv, "check 5.2G: CCK!\n");
IWL_WARN(priv, "mac/bssid mcast!\n");
IWL_WARN(priv, "neither 1 nor 6 are basic\n");
IWL_WARN(priv, "aid > 2007\n");
IWL_WARN(priv, "CCK and short slot\n");
IWL_WARN(priv, "CCK and auto detect\n");
IWL_WARN(priv, "TGg but no auto-detect\n");
IWL_WARN(priv, "zero channel is invalid\n");
IWL_WARN(priv, "Invalid scan band\n");
IWL_WARN(priv, "Request scan called when driver not ready.\n");
IWL_WARN(priv, "Invalid MIMO PS mode %d\n", sta->deflink.smps_mode);
IWL_WARN(priv,
IWL_WARN(priv,
IWL_WARN(fwrt,
IWL_WARN(fwrt,
IWL_WARN(fwrt, "Collecting data: trigger %d fired.\n",
IWL_WARN(fwrt, "Force restart: trigger %d fired.\n",
IWL_WARN(fwrt, "WRT: Trigger %d is not active, aborting dump\n",
IWL_WARN(fwrt,
IWL_WARN(fwrt, "Trigger %d occurred while no-collect window.\n",
IWL_WARN(fwrt,
IWL_WARN(fwrt,
IWL_WARN(fwrt,
IWL_WARN(trans, "WRT: Overriding region id %u\n", id);
IWL_WARN(trans,
IWL_WARN(fwrt, "WRT: Failed to allocate fragment size %lu\n",
IWL_WARN(fwrt,
IWL_WARN(drv,
IWL_WARN(drv,
IWL_WARN(trans,
IWL_WARN(mld, "Unable to find TIM Element in beacon\n");
IWL_WARN(mld,
IWL_WARN(mld,
IWL_WARN(mld, "empty STA mask for key %d\n", key->keyidx);
IWL_WARN(mld, "failed to add key to FW (%d)\n", ret);
IWL_WARN(mld, "LED command failed: %d\n", err);
IWL_WARN(mld,
IWL_WARN(mld,
IWL_WARN(mld_vif->mld, "Unexpected EMLSR notification: %d\n",
IWL_WARN(mvm, "Rfkill was toggled during suspend\n");
IWL_WARN(mvm,
IWL_WARN(mvm,
IWL_WARN(mvm, "LED command failed: %d\n", err);
IWL_WARN(mvm,
IWL_WARN(mvm,
IWL_WARN(mvm, "Unable to find TIM Element in beacon\n");
IWL_WARN(mvm, "Failed updating beacon data\n");
IWL_WARN(mvm, "Failed to enable FTM responder (%d)\n",
IWL_WARN(mvm, "set key failed\n");
IWL_WARN(mvm, "Failed updating beacon data\n");
IWL_WARN(mvm, "Failed to enable FTM responder (%d)\n",
IWL_WARN(mvm, "Failed sending remove station\n");
IWL_WARN(mvm, "Unhandled alg: 0x%x\n", rx_pkt_status);
IWL_WARN(mvm, "Unhandled alg: 0x%x\n", status);
IWL_WARN(mvm, "Failed sending remove station\n");
IWL_WARN(mvm, "Failed sending remove station\n");
IWL_WARN(mvm, "Failed sending remove station\n");
IWL_WARN(mvm, "Failed sending remove station\n");
IWL_WARN(mvm, "RX BA Session refused by fw\n");
IWL_WARN(mvm, "Not enough RX BA SESSIONS\n");
IWL_WARN(mvm, "P2P_DEVICE remain on channel already running\n");
IWL_WARN(mvm, "No remain on channel event\n");
IWL_WARN(mvm, "CSA NOA started too early\n");
IWL_WARN(mvm, "Got TE with unknown action\n");
IWL_WARN(mvm, "Getting the temperature timed out\n");
IWL_WARN(mvm,
IWL_WARN(mvm,
IWL_WARN(trans, "Claim null rxb?\n");
IWL_WARN(trans, "RF_KILL bit toggled to %s.\n",
IWL_WARN(trans, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
IWL_WARN(trans, "Disabled INTA bits 0x%08x were pending\n",
IWL_WARN(trans, "Exit HW not ready\n");
IWL_WARN(trans,
IWL_WARN(trans, "Exit HW not ready\n");
IWL_WARN(trans,
IWL_WARN(trans, "reporting RF_KILL (radio %s)\n",
IWL_WARN(trans, "changing debug rfkill %d->%d\n",
IWL_WARN(trans,
IWL_WARN(trans,
IWL_WARN(trans, "Master Disable Timed Out, 100 usec\n");
IWL_WARN(trans, "PCI should have external buffer debug\n");
IWL_WARN(trans,