arch/arm/kernel/efi.c
102
pr_warn(FW_BUG "EFI stub was entered with MMU and Dcache disabled, please fix your firmware!\n");
arch/arm/kernel/efi.c
104
pr_warn(FW_BUG "ExitBootServices() returned with MMU and Dcache disabled, please fix your firmware!\n");
arch/arm/mm/cache-feroceon-l2.c
337
pr_err(FW_BUG
arch/arm64/kernel/acpi.c
156
pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 5.1+\n",
arch/arm64/kernel/acpi.c
310
pr_warn(FW_BUG "requested region covers multiple EFI memory regions\n");
arch/arm64/kernel/acpi.c
334
pr_warn(FW_BUG "requested region covers kernel memory @ %pa\n", &phys);
arch/arm64/kernel/efi.c
165
pr_err_ratelimited(FW_BUG "register x18 corrupted by EFI %s\n", f);
arch/arm64/kernel/efi.c
228
pr_err(FW_BUG "Unable to handle %s in EFI runtime service\n", msg);
arch/arm64/kernel/setup.c
327
pr_warn(FW_BUG "Kernel image misaligned at boot, please fix your bootloader!");
arch/arm64/kernel/setup.c
329
FW_BUG "Booted with MMU enabled!");
arch/arm64/kvm/vgic/vgic-v3.c
931
pr_warn(FW_BUG "CPU interface incapable of MMIO access\n");
arch/riscv/kernel/acpi.c
242
pr_warn(FW_BUG "requested region covers multiple EFI memory regions\n");
arch/riscv/kernel/acpi.c
266
pr_warn(FW_BUG "requested region covers kernel memory\n");
arch/riscv/kernel/acpi.c
93
pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 6.5+\n",
arch/x86/events/amd/ibs.c
1571
pr_err(FW_BUG "cpu %d, invalid IBS interrupt offset %d (MSR%08X=0x%016llx)\n",
arch/x86/events/amd/ibs.c
1577
pr_err(FW_BUG "cpu %d, IBS interrupt offset %d not available (MSR%08X=0x%016llx)\n",
arch/x86/events/core.c
340
pr_err(FW_BUG "the BIOS has corrupted hw-PMU resources (MSR %x is %Lx)\n",
arch/x86/include/asm/iommu.h
35
pr_err(FW_BUG "No firmware reserved region can cover this RMRR [%#018Lx-%#018Lx], contact BIOS vendor for fixes\n",
arch/x86/kernel/acpi/cstate.c
144
pr_warn(FW_BUG "ACPI MWAIT C-state 0x%x not supported by HW (0x%x)\n",
arch/x86/kernel/apic/apic.c
1275
pr_err(FW_BUG "Local APIC not detected, force emulation\n");
arch/x86/kernel/apic/apic.c
391
pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for "
arch/x86/kernel/apic/apic.c
399
pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for "
arch/x86/kernel/apic/apic.c
565
pr_err(FW_BUG "TSC_DEADLINE disabled due to Errata; "
arch/x86/kernel/apic/io_apic.c
1388
pr_err(FW_BUG "IO-APIC#%d ID is %d in the MPC table!...\n",
arch/x86/kernel/apic/io_apic.c
1400
pr_err(FW_BUG "IO-APIC#%d ID %d is already used!...\n",
arch/x86/kernel/apic/io_apic.c
2098
panic_if_irq_remap(FW_BUG "Timer not connected to IO-APIC");
arch/x86/kernel/cpu/amd.c
431
pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n");
arch/x86/kernel/cpu/hygon.c
103
pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n");
arch/x86/kernel/cpu/mce/amd.c
413
pr_err(FW_BUG "cpu %d, failed to setup threshold interrupt "
arch/x86/kernel/cpu/mce/amd.c
420
pr_err(FW_BUG "cpu %d, invalid threshold interrupt offset %d "
arch/x86/kernel/cpu/mce/core.c
2331
pr_warn(FW_BUG
arch/x86/kernel/cpu/sgx/main.c
830
pr_warn(FW_BUG "Unable to map EPC section to online node. Fallback to the NUMA node 0.\n");
arch/x86/kernel/cpu/topology.c
200
pr_warn(FW_BUG "APIC enumeration order not specification compliant\n");
arch/x86/kernel/cpu/topology_common.c
213
pr_err(FW_BUG "CPU%4u: APIC ID mismatch. CPUID: 0x%04x APIC: 0x%04x\n",
arch/x86/kernel/cpu/topology_common.c
218
pr_err(FW_BUG "CPU%4u: APIC ID mismatch. Firmware: 0x%04x APIC: 0x%04x\n",
arch/x86/kernel/cpu/topology_common.c
226
pr_err(FW_BUG "CPU%d: Topology domain %u shift %u != %u\n", cpu, dom,
arch/x86/kernel/cpu/topology_ext.c
124
pr_warn_once(FW_BUG "CPUID leaf 0x%x subleaf 0 has shift level 0 but %u CPUs. Fixing it up.\n",
arch/x86/kernel/cpu/topology_ext.c
96
pr_warn_once(FW_BUG "CPUID leaf 0x%x subleaf %d APIC ID mismatch %x != %x\n",
arch/x86/kernel/e820.c
219
pr_info(FW_BUG "out of order E820 entry!\n");
arch/x86/kernel/smpboot.c
624
pr_err(FW_BUG "SLIT table doesn't have the expected form for SNC -- fixup disabled!\n");
arch/x86/kernel/tsc_sync.c
144
pr_warn(FW_BUG "TSC ADJUST: CPU%u: %lld force to 0\n",
arch/x86/kernel/tsc_sync.c
223
printk_once(FW_BUG "TSC ADJUST differs within socket(s), fixing all errors\n");
arch/x86/kernel/tsc_sync.c
77
pr_warn(FW_BUG "TSC ADJUST differs: CPU%u %lld --> %lld. Restoring\n",
arch/x86/kvm/svm/avic.c
1244
pr_warn(FW_BUG "Cannot enable x2AVIC, AVIC is unsupported\n");
arch/x86/pci/acpi.c
460
dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n",
arch/x86/pci/mmconfig-shared.c
824
dev_warn(dev, FW_BUG "ECAM %pR isn't reserved\n",
arch/x86/platform/efi/efi.c
257
pr_warn_once(FW_BUG "Invalid EFI memory map entries:\n");
arch/x86/platform/efi/quirks.c
796
WARN(1, FW_BUG "Page fault caused by firmware at PA: 0x%lx\n",
drivers/acpi/acpi_extlog.c
281
pr_warn(FW_BUG "L1 Directory is invalid at physical %llx\n",
drivers/acpi/acpi_extlog.c
312
pr_warn(FW_BUG EMCA_BUG,
drivers/acpi/acpi_extlog.c
334
pr_warn(FW_BUG EMCA_BUG,
drivers/acpi/acpi_extlog.c
349
pr_warn(FW_BUG EMCA_BUG,
drivers/acpi/acpi_extlog.c
383
pr_warn(FW_BUG "Extended error log disabled because of problems parsing f/w tables\n");
drivers/acpi/acpi_fpdt.c
172
pr_info(FW_BUG "invalid physical address: 0x%llx!\n", address);
drivers/acpi/acpi_fpdt.c
181
pr_info(FW_BUG "subtable signature and type mismatch!\n");
drivers/acpi/acpi_fpdt.c
198
pr_err(FW_BUG "Zero-length record found in FPTD.\n");
drivers/acpi/acpi_fpdt.c
206
pr_err(FW_BUG "Invalid record %d for subtable %s\n",
drivers/acpi/acpi_fpdt.c
222
pr_err(FW_BUG "Invalid %d for subtable %s\n",
drivers/acpi/acpi_fpdt.c
237
pr_err(FW_BUG "Invalid %d for subtable %s\n",
drivers/acpi/acpi_mrrm.c
80
pr_info(FW_BUG "No ranges listed in MRRM table\n");
drivers/acpi/acpi_video.c
1069
pr_info(FW_BUG "ACPI(%s) defines _DOD but not _DOS\n",
drivers/acpi/acpi_video.c
1995
pr_info(FW_BUG
drivers/acpi/apei/apei-base.c
579
pr_warn(FW_BUG APEI_PFX
drivers/acpi/apei/apei-base.c
587
pr_warn(FW_BUG APEI_PFX
drivers/acpi/apei/apei-base.c
604
pr_warn(FW_BUG APEI_PFX
drivers/acpi/apei/apei-base.c
613
pr_warn(FW_BUG APEI_PFX
drivers/acpi/apei/bert.c
144
pr_err(FW_BUG "table invalid.\n");
drivers/acpi/apei/bert.c
58
pr_err(FW_BUG "Truncated status block (length: %u).\n",
drivers/acpi/apei/bert.c
68
pr_err(FW_BUG "Invalid error record.\n");
drivers/acpi/apei/einj-core.c
1059
pr_warn(FW_BUG "Invalid EINJ table.\n");
drivers/acpi/apei/einj-core.c
294
pr_info(FW_BUG "Bad1 v2 extension length %u\n", e->length);
drivers/acpi/apei/einj-core.c
298
pr_info(FW_BUG "Bad2 v2 extension length %u\n", e->length);
drivers/acpi/apei/einj-core.c
436
pr_warn(FW_BUG "Invalid trigger error action table.\n");
drivers/acpi/apei/erst.c
1218
pr_err(FW_BUG "ERST table is invalid.\n");
drivers/acpi/apei/ghes.c
1700
pr_warn(FW_BUG GHES_PFX "Invalid error block length: %u for generic hardware error source: %d\n",
drivers/acpi/apei/ghes.c
569
pr_warn(FW_BUG "arm error length: %d\n", length);
drivers/acpi/apei/ghes.c
570
pr_warn(FW_BUG "length is too small\n");
drivers/acpi/apei/ghes.c
571
pr_warn(FW_BUG "firmware-generated error record is incorrect\n");
drivers/acpi/apei/hest.c
157
pr_warn(FW_BUG HEST_PFX
drivers/acpi/arm64/gtdt.c
192
pr_err(FW_BUG "limiting Platform Timer count to %d\n", cnt);
drivers/acpi/arm64/gtdt.c
214
pr_err(FW_BUG "GT block present, but frame count is zero.\n");
drivers/acpi/arm64/gtdt.c
219
pr_err(FW_BUG "GT block lists %d frames, ACPI spec only allows 8\n",
drivers/acpi/arm64/gtdt.c
331
pr_err(FW_BUG "failed to get the Watchdog base address.\n");
drivers/acpi/arm64/iort.c
1112
pr_err(FW_BUG "Invalid ID mapping, skipping RMR node %p\n",
drivers/acpi/arm64/iort.c
1510
pr_warn(FW_BUG "Named component missing memory address limit\n");
drivers/acpi/arm64/iort.c
1534
pr_warn(FW_BUG "Root complex missing memory address limit\n");
drivers/acpi/arm64/iort.c
355
pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n",
drivers/acpi/arm64/iort.c
373
pr_err(FW_BUG "[map %p] conflicting mapping for input ID 0x%x\n",
drivers/acpi/arm64/iort.c
378
pr_err(FW_BUG "applying workaround.\n");
drivers/acpi/arm64/iort.c
409
pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
drivers/acpi/arm64/iort.c
463
pr_err(FW_BUG "[node %p type %d] ID mapping index overflows valid mappings\n",
drivers/acpi/arm64/iort.c
506
pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
drivers/acpi/arm64/iort.c
841
pr_err(FW_BUG "[node %p type %d] Invalid MSI mapping\n",
drivers/acpi/arm64/iort.c
959
pr_err(FW_BUG "RMR descriptor[0x%llx - 0x%llx] not aligned to 64K, continue with [0x%llx - 0x%llx]\n",
drivers/acpi/arm64/iort.c
985
pr_err(FW_BUG "RMR descriptor[0x%llx] with zero length, continue anyway\n",
drivers/acpi/arm64/iort.c
998
pr_err(FW_BUG "RMR descriptor[0x%llx - 0x%llx] overlaps, continue anyway\n",
drivers/acpi/battery.c
565
pr_warn(FW_BUG "The _BIX method is broken, using _BIF.\n");
drivers/acpi/battery.c
606
pr_warn_once(FW_BUG "(dis)charge rate invalid.\n");
drivers/acpi/bus.c
116
pr_info(FW_BUG "Device [%s] status [%08x]: not present and enabled\n",
drivers/acpi/ec.c
2050
pr_err(FW_BUG "Ignoring ECDT due to empty ID string\n");
drivers/acpi/osi.c
51
pr_notice_once(FW_BUG
drivers/acpi/pci_root.c
676
FW_BUG "no secondary bus range in _CRS\n");
drivers/acpi/processor_perflib.c
385
pr_err(FW_BUG
drivers/acpi/processor_perflib.c
403
pr_err(FW_BUG
drivers/acpi/processor_perflib.c
453
pr_warn(FW_BUG "BIOS needs update for CPU "
drivers/acpi/riscv/rimt.c
321
pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
drivers/acpi/riscv/rimt.c
378
pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
drivers/acpi/spcr.c
109
pr_err(FW_BUG "Unacceptable wide SPCR Access Width. Defaulting to byte size\n");
drivers/acpi/spcr.c
114
pr_err(FW_BUG "Unexpected SPCR Access Width. Defaulting to byte size\n");
drivers/acpi/thermal.c
369
pr_info(FW_BUG "Invalid critical threshold (%d)\n", temp);
drivers/acpi/thermal.c
870
pr_warn(FW_BUG "No valid trip points!\n");
drivers/acpi/viot.c
203
pr_err(FW_BUG "Invalid PCI node size\n");
drivers/acpi/viot.c
217
pr_err(FW_BUG "Invalid MMIO node size\n");
drivers/acpi/viot.c
67
pr_err(FW_BUG "Node pointer overflows\n");
drivers/acpi/viot.c
71
pr_err(FW_BUG "Empty node\n");
drivers/char/tpm/tpm_crb.c
427
FW_BUG "tpm_crb_smc_start() returns res.a0 = 0x%lx\n",
drivers/char/tpm/tpm_crb.c
437
dev_err(dev, FW_BUG "tpm_crb: incorrect start method\n");
drivers/char/tpm/tpm_crb.c
599
FW_BUG "ACPI region does not cover the entire command/response buffer. %pr vs %llx %llx\n",
drivers/char/tpm/tpm_crb.c
636
dev_err(dev, FW_BUG "TPM2 ACPI table does not define a memory resource\n");
drivers/char/tpm/tpm_crb.c
677
dev_warn(dev, FW_BUG "Bad ACPI memory layout");
drivers/char/tpm/tpm_crb.c
749
dev_err(dev, FW_BUG "overlapping command and response buffer sizes are not identical");
drivers/char/tpm/tpm_crb.c
801
dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n");
drivers/char/tpm/tpm_crb.c
821
FW_BUG "TPM2 ACPI table has wrong size %u for start method type %d\n",
drivers/char/tpm/tpm_crb.c
834
FW_BUG "TPM2 ACPI table has wrong size %u for start method type %d\n",
drivers/char/tpm/tpm_crb.c
855
FW_BUG "TPM2 ACPI table has wrong size %u for start method type %d\n",
drivers/char/tpm/tpm_tis.c
153
dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n");
drivers/char/tpm/tpm_tis_core.c
1289
dev_err(&chip->dev, FW_BUG
drivers/char/tpm/tpm_tis_core.c
808
dev_warn(&chip->dev, FW_BUG
drivers/clocksource/arm_arch_timer.c
1221
pr_err(FW_BUG "frequency not available.\n");
drivers/clocksource/arm_arch_timer_mmio.c
342
dev_err(&pdev->dev, FW_BUG "Missing frame-number\n");
drivers/clocksource/arm_arch_timer_mmio.c
347
FW_BUG "Wrong frame-number, only 0-%u are permitted\n",
drivers/clocksource/arm_arch_timer_mmio.c
355
dev_err(&pdev->dev, FW_BUG "Duplicated frame-number\n");
drivers/cpufreq/powernow-k8.c
1017
FW_BUG "No compatible ACPI _PSS objects found.\n" \
drivers/cpufreq/powernow-k8.c
1018
FW_BUG "First, make sure Cool'N'Quiet is enabled in the BIOS.\n" \
drivers/cpufreq/powernow-k8.c
1019
FW_BUG "If that doesn't help, try upgrading your BIOS.\n"
drivers/cpufreq/powernow-k8.c
1048
pr_err(FW_BUG "No ACPI _PSS objects for CPU other than CPU0. Complain to your BIOS vendor.\n");
drivers/cpufreq/powernow-k8.c
500
pr_err(FW_BUG "vid %d invalid : 0x%x\n", j,
drivers/cpufreq/powernow-k8.c
506
pr_err(FW_BUG "0 vid exceeded with pstate %d\n", j);
drivers/cpufreq/powernow-k8.c
511
pr_err(FW_BUG "maxvid exceeded with pstate %d\n", j);
drivers/cpufreq/powernow-k8.c
515
pr_err(FW_BUG "maxfid exceeded with pstate %d\n", j);
drivers/cpufreq/powernow-k8.c
520
pr_err(FW_BUG "two low fids - %d : 0x%x\n", j,
drivers/cpufreq/powernow-k8.c
528
pr_err(FW_BUG "lastfid invalid\n");
drivers/cpufreq/powernow-k8.c
532
pr_info(FW_BUG "first fid not from lo freq table\n");
drivers/cpufreq/powernow-k8.c
643
pr_err(FW_BUG "PSB table is not v1.4\n");
drivers/cpufreq/powernow-k8.c
649
pr_err(FW_BUG "unknown flags\n");
drivers/cpufreq/powernow-k8.c
678
pr_err(FW_BUG "numpst must be 1\n");
drivers/cpufreq/powernow-k8.c
704
pr_err(FW_BUG "No PSB or ACPI _PSS objects\n");
drivers/edac/pnd2_edac.c
329
pr_info(FW_BUG "MOT mask cannot be zero\n");
drivers/edac/pnd2_edac.c
333
pr_info(FW_BUG "MOT mask is invalid\n");
drivers/edac/pnd2_edac.c
337
pr_info(FW_BUG "MOT region base/mask alignment error\n");
drivers/firmware/arm_scmi/perf.c
383
dev_info(dev, FW_BUG "Failed to add opps_by_lvl at %d for %s - ret:%d\n",
drivers/firmware/arm_scmi/perf.c
405
dev_info(dev, FW_BUG "Failed to add opps_by_lvl at %d for %s - ret:%d\n",
drivers/firmware/dmi_scan.c
110
pr_warn(FW_BUG
drivers/firmware/dmi_scan.c
443
pr_warn(FW_BUG "Too many DIMM entries in SMBIOS table\n");
drivers/firmware/efi/libstub/efi-stub-helper.c
198
efi_warn_once(FW_BUG "LoadOptions is an EFI_LOAD_OPTION descriptor\n");
drivers/firmware/efi/libstub/efi-stub-helper.c
199
efi_warn_once(FW_BUG "Using OptionalData as a workaround\n");
drivers/firmware/efi/memattr.c
53
pr_warn(FW_BUG "Corrupted EFI Memory Attributes Table detected! (version == %u, desc_size == %u, num_entries == %u)\n",
drivers/firmware/efi/runtime-wrappers.c
159
pr_err_ratelimited(FW_BUG "IRQ flags corrupted (0x%08lx=>0x%08lx) by EFI call from %pS\n",
drivers/firmware/efi/tpm.c
101
pr_err(FW_BUG "Failed to parse event in TPM Final Events Log\n");
drivers/firmware/efi/tpm.c
75
pr_warn(FW_BUG "TPM Final Events table invalid\n");
drivers/firmware/psci/psci.c
171
pr_info(FW_BUG "failed to set %s mode: %d\n",
drivers/firmware/smccc/soc_id.c
96
pr_warn(FW_BUG "Ignoring improperly formatted name\n");
drivers/gpio/gpio-usbio.c
50
dev_warn_once(dev, FW_BUG "GPIO %u is not in FW pins bitmap\n", offset);
drivers/gpio/gpiolib-acpi-core.c
646
dev_warn(dev, FW_BUG "GPIO not in correct mode, fixing\n");
drivers/i2c/i2c-core-acpi.c
438
dev_warn(dev, FW_BUG "DSDT uses known not-working I2C bus speed %d, forcing it to %d\n",
drivers/input/touchscreen/silead.c
532
dev_warn(&client->dev, FW_BUG "Stuck I2C bus: please ignore the next 'controller timed out' error\n");
drivers/iommu/amd/init.c
1635
pr_err(FW_BUG "Invalid IVHD device type %#x\n",
drivers/iommu/amd/init.c
1645
pr_err(FW_BUG "Invalid HID.\n");
drivers/iommu/amd/init.c
1654
pr_warn(FW_BUG "Invalid UID length.\n");
drivers/iommu/amd/init.c
283
pr_err(FW_BUG
drivers/iommu/amd/init.c
3101
const char *fw_bug = FW_BUG;
drivers/iommu/amd/init.c
3245
pr_warn_once(FW_BUG "Disable host address translation due to invalid translation level (%#x).\n",
drivers/iommu/amd/init.c
591
pr_err(FW_BUG "IVRS invalid checksum\n");
drivers/iommu/amd/iommu.c
290
dev_err_once(dev, FW_BUG "No ACPI device matched UID, but %d device%s matched HID.\n",
drivers/iommu/intel/dmar.c
206
pr_info(FW_BUG "RMRR entry for device %02x:%02x.%x is broken - applying workaround\n",
drivers/iommu/intel/dmar.c
2265
pr_warn(FW_BUG "No DRHD structures in buffer returned by _DSM method\n");
drivers/iommu/intel/dmar.c
474
pr_warn(FW_BUG
drivers/iommu/intel/dmar.c
506
pr_warn(FW_BUG
drivers/iommu/intel/dmar.c
593
pr_debug(FW_BUG "Invalid 0-length structure\n");
drivers/iommu/intel/dmar.c
597
pr_warn(FW_BUG "Record passes table end\n");
drivers/iommu/intel/dmar.c
676
pr_warn(FW_BUG "No DRHD structure found in DMAR table\n");
drivers/iommu/intel/dmar.c
870
pr_warn_once(FW_BUG
drivers/iommu/intel/iommu.c
1919
pr_warn(FW_BUG
drivers/iommu/intel/iommu.c
432
pr_warn_once(FW_BUG "BIOS assigned incorrect VT-d unit for Intel(R) QuickData Technology device\n");
drivers/iommu/intel/irq_remapping.c
985
pr_err(FW_BUG "ioapic %d has no mapping iommu, "
drivers/irqchip/irq-bcm2835.c
168
pr_err(FW_BUG "Bootloader left irq enabled: "
drivers/irqchip/irq-bcm2835.c
176
pr_err(FW_BUG "Bootloader left fiq enabled\n");
drivers/irqchip/irq-gic-v3.c
1638
pr_err(FW_BUG "Illegal GSI%d translation request\n",
drivers/irqchip/irq-gic-v3.c
2174
pr_warn_once(FW_BUG "%s region %pa has overlapping address\n",
drivers/irqchip/irq-gic-v5-irs.c
629
pr_warn(FW_BUG "Erroneous CPU node phandle\n");
drivers/irqchip/irq-gic-v5-irs.c
901
pr_warn_once(FW_BUG "%s region %pa has overlapping address\n", name, &base);
drivers/irqchip/irq-gic.c
1120
pr_err(FW_BUG "Illegal GSI%d translation request\n",
drivers/pci/pci-acpi.c
1634
dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
drivers/pci/pci-sysfs.c
382
pci_alert(pdev, FW_BUG "Overriding NUMA node to %d. Contact your vendor for updates.",
drivers/pci/pcie/edr.c
182
pci_err(edev, FW_BUG "This device doesn't support DPC\n");
drivers/pci/pcie/edr.c
55
pci_err(pdev, FW_BUG "Enable DPC _DSM returned non integer\n");
drivers/pci/pcie/edr.c
98
pci_err(pdev, FW_BUG "Locate Port _DSM returned non integer\n");
drivers/pci/probe.c
281
pci_info(dev, FW_BUG "%s: invalid; can't size\n", res_name);
drivers/pci/quirks.c
396
pci_info(dev, FW_BUG "Tiger Point LPC.BM_STS cleared\n");
drivers/pci/quirks.c
6119
pci_info(pdev, FW_BUG "GPU left initialized by EFI, resetting\n");
drivers/pci/quirks.c
642
pci_info(dev, FW_BUG "%s %pR: %s quirk\n", res_name, res, name);
drivers/pci/vpd.c
579
pci_warn(dev, FW_BUG "disabling VPD access (can't determine size of non-standard VPD format)\n");
drivers/pinctrl/intel/pinctrl-baytrail.c
1408
dev_warn(vg->dev, FW_BUG "Pin %i: DIRECT_IRQ_EN set but no IRQ assigned, clearing\n", pin);
drivers/pinctrl/intel/pinctrl-baytrail.c
1436
FW_BUG "Pin %i: DIRECT_IRQ_EN set without trigger (CONF0: %#08x), clearing\n",
drivers/pinctrl/intel/pinctrl-baytrail.c
738
dev_warn(vg->dev, FW_BUG "Pin %i: forcibly re-configured as GPIO\n", offset);
drivers/pinctrl/intel/pinctrl-lynxpoint.c
354
dev_warn(lg->dev, FW_BUG "pin %u forcibly reconfigured as GPIO\n", pin);
drivers/pinctrl/mvebu/pinctrl-dove.c
857
dev_warn(&pdev->dev, FW_BUG "Missing pinctrl regs in DTB. Please update your firmware.\n");
drivers/platform/wmi/core.c
1162
FW_BUG "%s method block execution control method not found\n",
drivers/platform/wmi/core.c
1181
FW_BUG "%s data block query control method not found\n",
drivers/platform/x86/intel/int3472/discrete.c
317
dev_dbg(int3472->dev, FW_BUG "%s %s pin number mismatch _DSM %d resource %d\n",
drivers/platform/x86/lenovo/thinkpad_acpi.c
4316
FW_BUG "disable bluetooth subdriver for Intel cards\n");
drivers/platform/x86/quickstart.c
136
FW_BUG "GHID method returned buffer of unexpected length %u\n",
drivers/pnp/quirks.c
311
dev_info(&dev->dev, FW_BUG
drivers/pnp/quirks.c
395
dev_info(&dev->dev, FW_BUG "PNP resource %pR covers only part of %s Intel MCH; extending to %pR\n",
drivers/powercap/intel_rapl_tpmi.c
165
pr_warn(FW_BUG "Unsupported major version:%ld\n",
drivers/powercap/intel_rapl_tpmi.c
176
pr_warn(FW_BUG "Invalid Domain size %d\n", tpmi_domain_size);
drivers/powercap/intel_rapl_tpmi.c
183
pr_warn(FW_BUG "Invalid Domain flag 0x%x\n", tpmi_domain_flags);
drivers/powercap/intel_rapl_tpmi.c
193
pr_warn(FW_BUG "System domain must support Domain Info register\n");
drivers/powercap/intel_rapl_tpmi.c
205
pr_warn(FW_BUG "Unsupported Domain type %d\n", tpmi_domain_type);
drivers/powercap/intel_rapl_tpmi.c
210
pr_warn(FW_BUG "Duplicate Domain type %d\n", tpmi_domain_type);
drivers/ras/ras.c
86
pr_warn(FW_BUG "section length: %d\n", err->section_length);
drivers/ras/ras.c
87
pr_warn(FW_BUG "section length is too small\n");
drivers/ras/ras.c
88
pr_warn(FW_BUG "firmware-generated error record is incorrect\n");
drivers/watchdog/orion_wdt.c
420
WARN(1, FW_BUG "falling back to hardcoded RSTOUT reg %pa\n", &rstout);
kernel/power/snapshot.c
2380
pr_err(FW_BUG "Memory map mismatch at 0x%llx after hibernation\n",
