/*-
 * Copyright (c) 2012, 2013 The FreeBSD Foundation
 *
 * This software was developed by Oleksandr Rybalko under sponsorship
 * from the FreeBSD Foundation.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1.   Redistributions of source code must retain the above copyright
 *      notice, this list of conditions and the following disclaimer.
 * 2.   Redistributions in binary form must reproduce the above copyright
 *      notice, this list of conditions and the following disclaimer in the
 *      documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

/* Simple UART console driver for Freescale i.MX515 */

#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/cons.h>
#include <sys/consio.h>
#include <sys/kernel.h>

/* Allow it to be predefined, to be able to use another UART for console */
#ifndef IMX_UART_BASE
#define IMX_UART_BASE   0xe3fbc000 /* imx51 UART1 */
#endif

#define IMX_RXD                 0x00
#define IMX_TXD                 0x40

#define IMX_UFCR                0x90
#define IMX_USR1                0x94
#define IMX_USR1_TRDY           (1 << 13)

#define IMX_USR2                0x98
#define IMX_USR2_RDR            (1 << 0)
#define IMX_USR2_TXFE           (1 << 14)
#define IMX_USR2_TXDC           (1 << 3)

#define IMX_UTS                 0xb4
#define IMX_UTS_TXFULL          (1 << 4)

/*
 * The base address of the uart registers.
 *
 * This is global so that it can be changed on the fly from the outside.  For
 * example, set imx_uart_base=physaddr and then call cninit() as the first two
 * lines of initarm() and enjoy printf() availability through the tricky bits of
 * startup.  After initarm() switches from physical to virtual addressing, just
 * set imx_uart_base=virtaddr and printf keeps working.
 */
uint32_t imx_uart_base = IMX_UART_BASE;

/*
 * uart related funcs
 */
static uint32_t
ub_getreg(uint32_t off)
{

        return *((volatile uint32_t *)(imx_uart_base + off));
}

static void
ub_setreg(uint32_t off, uint32_t val)
{

        *((volatile uint32_t *)(imx_uart_base + off)) = val;
}

static int
ub_tstc(void)
{

        return ((ub_getreg(IMX_USR2) & IMX_USR2_RDR) ? 1 : 0);
}

static int
ub_getc(void)
{

        while (!ub_tstc());
                __asm __volatile("nop");

        return (ub_getreg(IMX_RXD) & 0xff);
}

static void
ub_putc(unsigned char c)
{

        if (c == '\n')
                ub_putc('\r');

        while (ub_getreg(IMX_UTS) & IMX_UTS_TXFULL)
                __asm __volatile("nop");

        ub_setreg(IMX_TXD, c);
}

static cn_probe_t       uart_cnprobe;
static cn_init_t        uart_cninit;
static cn_term_t        uart_cnterm;
static cn_getc_t        uart_cngetc;
static cn_putc_t        uart_cnputc;
static cn_grab_t        uart_cngrab;
static cn_ungrab_t      uart_cnungrab;

static void
uart_cngrab(struct consdev *cp)
{

}

static void
uart_cnungrab(struct consdev *cp)
{

}

static void
uart_cnprobe(struct consdev *cp)
{

        sprintf(cp->cn_name, "uart");
        cp->cn_pri = CN_NORMAL;
}

static void
uart_cninit(struct consdev *cp)
{

        /* Init fifo trigger levels to 32 bytes, refclock div to 2. */
        ub_setreg(IMX_UFCR, 0x00004210);
}

static void
uart_cnputc(struct consdev *cp, int c)
{

        ub_putc(c);
}

static int
uart_cngetc(struct consdev * cp)
{

        return ub_getc();
}

static void
uart_cnterm(struct consdev * cp)
{

}

CONSOLE_DRIVER(uart);