/*      $NetBSD: ucomvar.h,v 1.9 2001/01/23 21:56:17 augustss Exp $     */

/*-
 * SPDX-License-Identifier: BSD-2-Clause
 *
 * Copyright (c) 2001-2002, Shunsuke Akiyama <akiyama@jp.FreeBSD.org>.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

/*-
 * Copyright (c) 1999 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Lennart Augustsson (lennart@augustsson.net) at
 * Carlstedt Research & Technology.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _USB_SERIAL_H_
#define _USB_SERIAL_H_

#include <sys/tty.h>
#include <sys/serial.h>
#include <sys/fcntl.h>
#include <sys/sysctl.h>
#include <sys/timepps.h>

/* Module interface related macros */
#define UCOM_MODVER     1

#define UCOM_MINVER     1
#define UCOM_PREFVER    UCOM_MODVER
#define UCOM_MAXVER     1
#define UCOM_JITTERBUF_SIZE     128     /* bytes */

struct usb_device;
struct ucom_softc;
struct usb_device_request;
struct thread;

/*
 * NOTE: There is no guarantee that "ucom_cfg_close()" will
 * be called after "ucom_cfg_open()" if the device is detached
 * while it is open!
 */
struct ucom_callback {
        void    (*ucom_cfg_get_status) (struct ucom_softc *, uint8_t *plsr, uint8_t *pmsr);
        void    (*ucom_cfg_set_dtr) (struct ucom_softc *, uint8_t);
        void    (*ucom_cfg_set_rts) (struct ucom_softc *, uint8_t);
        void    (*ucom_cfg_set_break) (struct ucom_softc *, uint8_t);
        void    (*ucom_cfg_set_ring) (struct ucom_softc *, uint8_t);
        void    (*ucom_cfg_param) (struct ucom_softc *, struct termios *);
        void    (*ucom_cfg_open) (struct ucom_softc *);
        void    (*ucom_cfg_close) (struct ucom_softc *);
        int     (*ucom_pre_open) (struct ucom_softc *);
        int     (*ucom_pre_param) (struct ucom_softc *, struct termios *);
        int     (*ucom_ioctl) (struct ucom_softc *, uint32_t, caddr_t, int, struct thread *);
        void    (*ucom_start_read) (struct ucom_softc *);
        void    (*ucom_stop_read) (struct ucom_softc *);
        void    (*ucom_start_write) (struct ucom_softc *);
        void    (*ucom_stop_write) (struct ucom_softc *);
        void    (*ucom_tty_name) (struct ucom_softc *, char *pbuf, uint16_t buflen, uint16_t unit, uint16_t subunit);
        void    (*ucom_poll) (struct ucom_softc *);
        void    (*ucom_free) (struct ucom_softc *);
};

/* Line status register */
#define ULSR_RCV_FIFO   0x80
#define ULSR_TSRE       0x40            /* Transmitter empty: byte sent */
#define ULSR_TXRDY      0x20            /* Transmitter buffer empty */
#define ULSR_BI         0x10            /* Break detected */
#define ULSR_FE         0x08            /* Framing error: bad stop bit */
#define ULSR_PE         0x04            /* Parity error */
#define ULSR_OE         0x02            /* Overrun, lost incoming byte */
#define ULSR_RXRDY      0x01            /* Byte ready in Receive Buffer */
#define ULSR_RCV_MASK   0x1f            /* Mask for incoming data or error */

struct ucom_cfg_task {
        struct usb_proc_msg hdr;
        struct ucom_softc *sc;
};

struct ucom_param_task {
        struct usb_proc_msg hdr;
        struct ucom_softc *sc;
        struct termios termios_copy;
};

struct ucom_super_softc {
        struct usb_process sc_tq;
        int sc_unit;
        int sc_subunits;
        int sc_refs;
        int sc_flag;    /* see UCOM_FLAG_XXX */
        struct sysctl_oid *sc_sysctl_ttyname;
        struct sysctl_oid *sc_sysctl_ttyports;
        char sc_ttyname[16];
};

struct ucom_softc {
        /*
         * NOTE: To avoid losing level change information we use two
         * tasks instead of one for all commands.
         *
         * Level changes are transitions like:
         *
         * ON->OFF
         * OFF->ON
         * OPEN->CLOSE
         * CLOSE->OPEN
         */
        struct ucom_cfg_task    sc_start_task[2];
        struct ucom_cfg_task    sc_open_task[2];
        struct ucom_cfg_task    sc_close_task[2];
        struct ucom_cfg_task    sc_line_state_task[2];
        struct ucom_cfg_task    sc_status_task[2];
        struct ucom_param_task  sc_param_task[2];
        /* pulse capturing support, PPS */
        struct pps_state        sc_pps;
        /* Used to set "UCOM_FLAG_GP_DATA" flag: */
        struct usb_proc_msg     *sc_last_start_xfer;
        const struct ucom_callback *sc_callback;
        struct ucom_super_softc *sc_super;
        struct tty *sc_tty;
        struct consdev *sc_consdev;
        struct mtx *sc_mtx;
        void   *sc_parent;
        int sc_subunit;
        uint16_t sc_jitterbuf_in;
        uint16_t sc_jitterbuf_out;
        uint16_t sc_portno;
        uint16_t sc_flag;
#define UCOM_FLAG_RTS_IFLOW     0x01    /* use RTS input flow control */
#define UCOM_FLAG_GONE          0x02    /* the device is gone */
#define UCOM_FLAG_ATTACHED      0x04    /* set if attached */
#define UCOM_FLAG_GP_DATA       0x08    /* set if get and put data is possible */
#define UCOM_FLAG_LL_READY      0x20    /* set if low layer is ready */
#define UCOM_FLAG_HL_READY      0x40    /* set if high layer is ready */
#define UCOM_FLAG_CONSOLE       0x80    /* set if device is a console */
#define UCOM_FLAG_WAIT_REFS   0x0100    /* set if we must wait for refs */
#define UCOM_FLAG_FREE_UNIT   0x0200    /* set if we must free the unit */
#define UCOM_FLAG_INWAKEUP    0x0400    /* set if we are in the tsw_inwakeup callback */
#define UCOM_FLAG_LSRTXIDLE   0x0800    /* set if sc_lsr bits ULSR_TSRE+TXRDY work */
#define UCOM_FLAG_DEVICE_MODE 0x1000    /* set if we're an USB device, not a host */
        uint8_t sc_lsr;
        uint8_t sc_msr;
        uint8_t sc_mcr;
        /* programmed line state bits */
        uint8_t sc_pls_set;             /* set bits */
        uint8_t sc_pls_clr;             /* cleared bits */
        uint8_t sc_pls_curr;            /* last state */
#define UCOM_LS_DTR     0x01
#define UCOM_LS_RTS     0x02
#define UCOM_LS_BREAK   0x04
#define UCOM_LS_RING    0x08
        uint8_t sc_jitterbuf[UCOM_JITTERBUF_SIZE];
};

#define UCOM_MTX_ASSERT(sc, what) USB_MTX_ASSERT((sc)->sc_mtx, what)
#define UCOM_MTX_LOCK(sc) USB_MTX_LOCK((sc)->sc_mtx)
#define UCOM_MTX_UNLOCK(sc) USB_MTX_UNLOCK((sc)->sc_mtx)
#define UCOM_UNLOAD_DRAIN(x) \
SYSUNINIT(var, SI_SUB_KLD - 2, SI_ORDER_ANY, ucom_drain_all, 0)

#define ucom_cfg_do_request(udev,com,req,ptr,flags,timo) \
    usbd_do_request_proc(udev,&(com)->sc_super->sc_tq,req,ptr,flags,NULL,timo)

int     ucom_attach(struct ucom_super_softc *,
            struct ucom_softc *, int, void *,
            const struct ucom_callback *callback, struct mtx *);
void    ucom_detach(struct ucom_super_softc *, struct ucom_softc *);
void    ucom_set_pnpinfo_usb(struct ucom_super_softc *, device_t);
void    ucom_set_usb_mode(struct ucom_super_softc *, enum usb_hc_mode);
void    ucom_status_change(struct ucom_softc *);
uint8_t ucom_get_data(struct ucom_softc *, struct usb_page_cache *,
            uint32_t, uint32_t, uint32_t *);
void    ucom_put_data(struct ucom_softc *, struct usb_page_cache *,
            uint32_t, uint32_t);
uint8_t ucom_cfg_is_gone(struct ucom_softc *);
void    ucom_drain(struct ucom_super_softc *);
void    ucom_drain_all(void *);
void    ucom_ref(struct ucom_super_softc *);
int     ucom_unref(struct ucom_super_softc *);

static inline void
ucom_use_lsr_txbits(struct ucom_softc *sc)
{

        sc->sc_flag |= UCOM_FLAG_LSRTXIDLE;
}

#endif                                  /* _USB_SERIAL_H_ */