/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2003 Silicon Graphics International Corp. * Copyright (c) 2011 Spectra Logic Corporation * Copyright (c) 2014-2017 Alexander Motin <mav@FreeBSD.org> * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * * $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl_ioctl.h#4 $ */ /* * CAM Target Layer ioctl interface. * * Author: Ken Merry <ken@FreeBSD.org> */ #ifndef _CTL_IOCTL_H_ #define _CTL_IOCTL_H_ #ifdef ICL_KERNEL_PROXY #include <sys/socket.h> #endif #include <sys/ioccom.h> #include <sys/nv.h> #include <dev/nvmf/nvmf.h> #include <dev/nvmf/nvmf_proto.h> #define CTL_DEFAULT_DEV "/dev/cam/ctl" /* * Maximum number of targets we support. */ #define CTL_MAX_TARGETS 1 /* * Maximum target ID we support. */ #define CTL_MAX_TARGID 15 /* * Maximum number of initiators per port. */ #define CTL_MAX_INIT_PER_PORT 2048 /* Hopefully this won't conflict with new misc devices that pop up */ #define CTL_MINOR 225 typedef enum { CTL_DELAY_TYPE_NONE, CTL_DELAY_TYPE_CONT, CTL_DELAY_TYPE_ONESHOT } ctl_delay_type; typedef enum { CTL_DELAY_LOC_NONE, CTL_DELAY_LOC_DATAMOVE, CTL_DELAY_LOC_DONE, } ctl_delay_location; typedef enum { CTL_DELAY_STATUS_NONE, CTL_DELAY_STATUS_OK, CTL_DELAY_STATUS_INVALID_LUN, CTL_DELAY_STATUS_INVALID_TYPE, CTL_DELAY_STATUS_INVALID_LOC, CTL_DELAY_STATUS_NOT_IMPLEMENTED } ctl_delay_status; struct ctl_io_delay_info { uint32_t lun_id; ctl_delay_type delay_type; ctl_delay_location delay_loc; uint32_t delay_secs; ctl_delay_status status; }; typedef enum { CTL_STATS_NO_IO, CTL_STATS_READ, CTL_STATS_WRITE } ctl_stat_types; #define CTL_STATS_NUM_TYPES 3 typedef enum { CTL_SS_OK, CTL_SS_NEED_MORE_SPACE, CTL_SS_ERROR } ctl_stats_status; typedef u_int ctl_stats_flags; #define CTL_STATS_FLAG_NONE 0x00 #define CTL_STATS_FLAG_TIME_VALID 0x01 struct ctl_io_stats { uint32_t item; uint64_t bytes[CTL_STATS_NUM_TYPES]; uint64_t operations[CTL_STATS_NUM_TYPES]; uint64_t dmas[CTL_STATS_NUM_TYPES]; struct bintime time[CTL_STATS_NUM_TYPES]; struct bintime dma_time[CTL_STATS_NUM_TYPES]; }; struct ctl_get_io_stats { struct ctl_io_stats *stats; /* passed to/from kernel */ size_t alloc_len; /* passed to kernel */ size_t fill_len; /* passed to userland */ int first_item; /* passed to kernel */ int num_items; /* passed to userland */ ctl_stats_status status; /* passed to userland */ ctl_stats_flags flags; /* passed to userland */ struct timespec timestamp; /* passed to userland */ }; /* * The types of errors that can be injected: * * NONE: No error specified. * ABORTED: SSD_KEY_ABORTED_COMMAND, 0x45, 0x00 * MEDIUM_ERR: Medium error, different asc/ascq depending on read/write. * UA: Unit attention. * CUSTOM: User specifies the sense data. * TYPE: Mask to use with error types. * * Flags that affect injection behavior: * CONTINUOUS: This error will stay around until explicitly cleared. * DESCRIPTOR: Use descriptor sense instead of fixed sense. */ typedef u_int ctl_lun_error; #define CTL_LUN_INJ_NONE 0x000 #define CTL_LUN_INJ_ABORTED 0x001 #define CTL_LUN_INJ_MEDIUM_ERR 0x002 #define CTL_LUN_INJ_UA 0x003 #define CTL_LUN_INJ_CUSTOM 0x004 #define CTL_LUN_INJ_TYPE 0x0ff #define CTL_LUN_INJ_CONTINUOUS 0x100 #define CTL_LUN_INJ_DESCRIPTOR 0x200 /* * Flags to specify what type of command the given error pattern will * execute on. The first group of types can be ORed together. * * READ: Any read command. * WRITE: Any write command. * READWRITE: Any read or write command. * READCAP: Any read capacity command. * TUR: Test Unit Ready. * ANY: Any command. * MASK: Mask for basic command patterns. * * Special types: * * CMD: The CDB to act on is specified in struct ctl_error_desc_cmd. * RANGE: For read/write commands, act when the LBA is in the * specified range. */ typedef u_int ctl_lun_error_pattern; #define CTL_LUN_PAT_NONE 0x000 #define CTL_LUN_PAT_READ 0x001 #define CTL_LUN_PAT_WRITE 0x002 #define CTL_LUN_PAT_READWRITE CTL_LUN_PAT_READ | CTL_LUN_PAT_WRITE #define CTL_LUN_PAT_READCAP 0x004 #define CTL_LUN_PAT_TUR 0x008 #define CTL_LUN_PAT_ANY 0x0ff #define CTL_LUN_PAT_MASK 0x0ff #define CTL_LUN_PAT_CMD 0x100 #define CTL_LUN_PAT_RANGE 0x200 /* * This structure allows the user to specify a particular CDB pattern to * look for. * * cdb_pattern: Fill in the relevant bytes to look for in the CDB. * cdb_valid_bytes: Bitmask specifying valid bytes in the cdb_pattern. * flags: Specify any command flags (see ctl_io_flags) that * should be set. */ struct ctl_error_desc_cmd { uint8_t cdb_pattern[CTL_MAX_CDBLEN]; uint32_t cdb_valid_bytes; uint32_t flags; }; /* * Error injection descriptor. * * lun_id LUN to act on. * lun_error: The type of error to inject. See above for descriptions. * error_pattern: What kind of command to act on. See above. * cmd_desc: For CTL_LUN_PAT_CMD only. * lba_range: For CTL_LUN_PAT_RANGE only. * custom_sense: Specify sense. For CTL_LUN_INJ_CUSTOM only. * serial: Serial number returned by the kernel. Use for deletion. * links: Kernel use only. */ struct ctl_error_desc { uint32_t lun_id; /* To kernel */ ctl_lun_error lun_error; /* To kernel */ ctl_lun_error_pattern error_pattern; /* To kernel */ struct ctl_error_desc_cmd cmd_desc; /* To kernel */ struct ctl_lba_len lba_range; /* To kernel */ struct scsi_sense_data custom_sense; /* To kernel */ uint64_t serial; /* From kernel */ STAILQ_ENTRY(ctl_error_desc) links; /* Kernel use only */ }; typedef u_int ctl_ooa_flags; #define CTL_OOA_FLAG_NONE 0x00 #define CTL_OOA_FLAG_ALL_LUNS 0x01 typedef enum { CTL_OOA_OK, CTL_OOA_NEED_MORE_SPACE, CTL_OOA_ERROR } ctl_get_ooa_status; typedef u_int ctl_ooa_cmd_flags; #define CTL_OOACMD_FLAG_NONE 0x00 #define CTL_OOACMD_FLAG_DMA 0x01 #define CTL_OOACMD_FLAG_BLOCKED 0x02 #define CTL_OOACMD_FLAG_ABORT 0x04 #define CTL_OOACMD_FLAG_RTR 0x08 #define CTL_OOACMD_FLAG_DMA_QUEUED 0x10 #define CTL_OOACMD_FLAG_STATUS_QUEUED 0x20 #define CTL_OOACMD_FLAG_STATUS_SENT 0x40 struct ctl_ooa_entry { ctl_ooa_cmd_flags cmd_flags; uint8_t cdb[CTL_MAX_CDBLEN]; uint8_t cdb_len; uint64_t tag_num; ctl_tag_type tag_type; uint32_t lun_num; struct bintime start_bt; }; struct ctl_ooa { ctl_ooa_flags flags; /* passed to kernel */ uint64_t lun_num; /* passed to kernel */ uint32_t alloc_len; /* passed to kernel */ uint32_t alloc_num; /* passed to kernel */ struct ctl_ooa_entry *entries; /* filled in kernel */ uint32_t fill_len; /* passed to userland */ uint32_t fill_num; /* passed to userland */ uint32_t dropped_num; /* passed to userland */ struct bintime cur_bt; /* passed to userland */ ctl_get_ooa_status status; /* passed to userland */ }; typedef enum { CTL_LUN_NOSTATUS, CTL_LUN_OK, CTL_LUN_ERROR, CTL_LUN_WARNING } ctl_lun_status; #define CTL_ERROR_STR_LEN 160 typedef enum { CTL_LUNREQ_CREATE, CTL_LUNREQ_RM, CTL_LUNREQ_MODIFY, } ctl_lunreq_type; /* * The ID_REQ flag is used to say that the caller has requested a * particular LUN ID in the req_lun_id field. If we cannot allocate that * LUN ID, the ctl_add_lun() call will fail. * * The STOPPED flag tells us that the LUN should default to the powered * off state. It will return 0x04,0x02 until it is powered up. ("Logical * unit not ready, initializing command required.") * * The NO_MEDIA flag tells us that the LUN has no media inserted. * * The PRIMARY flag tells us that this LUN is registered as a Primary LUN * which is accessible via the Master shelf controller in an HA. This flag * being set indicates a Primary LUN. This flag being reset represents a * Secondary LUN controlled by the Secondary controller in an HA * configuration. Flag is applicable at this time to T_DIRECT types. * * The SERIAL_NUM flag tells us that the serial_num field is filled in and * valid for use in SCSI INQUIRY VPD page 0x80. * * The DEVID flag tells us that the device_id field is filled in and * valid for use in SCSI INQUIRY VPD page 0x83. * * The DEV_TYPE flag tells us that the device_type field is filled in. * * The EJECTED flag tells us that the removable LUN has tray open. * * The UNMAP flag tells us that this LUN supports UNMAP. * * The OFFLINE flag tells us that this LUN can not access backing store. */ typedef u_int ctl_backend_lun_flags; #define CTL_LUN_FLAG_ID_REQ 0x01 #define CTL_LUN_FLAG_STOPPED 0x02 #define CTL_LUN_FLAG_NO_MEDIA 0x04 #define CTL_LUN_FLAG_PRIMARY 0x08 #define CTL_LUN_FLAG_SERIAL_NUM 0x10 #define CTL_LUN_FLAG_DEVID 0x20 #define CTL_LUN_FLAG_DEV_TYPE 0x40 #define CTL_LUN_FLAG_UNMAP 0x80 #define CTL_LUN_FLAG_EJECTED 0x100 #define CTL_LUN_FLAG_READONLY 0x200 /* * LUN creation parameters: * * flags: Various LUN flags, see above. * * device_type: The SCSI device type. e.g. 0 for Direct Access, * 3 for Processor, etc. Only certain backends may * support setting this field. The CTL_LUN_FLAG_DEV_TYPE * flag should be set in the flags field if the device * type is set. * * lun_size_bytes: The size of the LUN in bytes. For some backends * this is relevant (e.g. ramdisk), for others, it may * be ignored in favor of using the properties of the * backing store. If specified, this should be a * multiple of the blocksize. * * The actual size of the LUN is returned in this * field. * * blocksize_bytes: The LUN blocksize in bytes. For some backends this * is relevant, for others it may be ignored in * favor of using the properties of the backing store. * * The actual blocksize of the LUN is returned in this * field. * * req_lun_id: The requested LUN ID. The CTL_LUN_FLAG_ID_REQ flag * should be set if this is set. The request will be * granted if the LUN number is available, otherwise * the LUN addition request will fail. * * The allocated LUN number is returned in this field. * * serial_num: This is the value returned in SCSI INQUIRY VPD page * 0x80. If it is specified, the CTL_LUN_FLAG_SERIAL_NUM * flag should be set. * * The serial number value used is returned in this * field. * * device_id: This is the value returned in the T10 vendor ID * based DESIGNATOR field in the SCSI INQUIRY VPD page * 0x83 data. If it is specified, the CTL_LUN_FLAG_DEVID * flag should be set. * * The device id value used is returned in this field. */ struct ctl_lun_create_params { ctl_backend_lun_flags flags; uint8_t device_type; uint64_t lun_size_bytes; uint32_t blocksize_bytes; uint32_t req_lun_id; uint8_t serial_num[CTL_SN_LEN]; uint8_t device_id[CTL_DEVID_LEN]; }; /* * LUN removal parameters: * * lun_id: The number of the LUN to delete. This must be set. * The LUN must be backed by the given backend. */ struct ctl_lun_rm_params { uint32_t lun_id; }; /* * LUN modification parameters: * * lun_id: The number of the LUN to modify. This must be set. * The LUN must be backed by the given backend. * * lun_size_bytes: The size of the LUN in bytes. If zero, update * the size using the backing file size, if possible. */ struct ctl_lun_modify_params { uint32_t lun_id; uint64_t lun_size_bytes; }; /* * Union of request type data. Fill in the appropriate union member for * the request type. */ union ctl_lunreq_data { struct ctl_lun_create_params create; struct ctl_lun_rm_params rm; struct ctl_lun_modify_params modify; }; /* * LUN request interface: * * backend: This is required, and is NUL-terminated a string * that is the name of the backend, like "ramdisk" or * "block". * * reqtype: The type of request, CTL_LUNREQ_CREATE to create a * LUN, CTL_LUNREQ_RM to delete a LUN. * * reqdata: Request type-specific information. See the * description of individual the union members above * for more information. * * num_be_args: This is the number of backend-specific arguments * in the be_args array. * * be_args: This is an array of backend-specific arguments. * See above for a description of the fields in this * structure. * * status: Status of the LUN request. * * error_str: If the status is CTL_LUN_ERROR, this will * contain a string describing the error. * * kern_be_args: For kernel use only. */ struct ctl_lun_req { #define CTL_BE_NAME_LEN 32 char backend[CTL_BE_NAME_LEN]; ctl_lunreq_type reqtype; union ctl_lunreq_data reqdata; void * args; nvlist_t * args_nvl; #define CTL_MAX_ARGS_LEN (1024 * 1024) size_t args_len; void * result; nvlist_t * result_nvl; size_t result_len; ctl_lun_status status; char error_str[CTL_ERROR_STR_LEN]; }; /* * LUN list status: * * NONE: No status. * * OK: Request completed successfully. * * NEED_MORE_SPACE: The allocated length of the entries field is too * small for the available data. * * ERROR: An error occurred, look at the error string for a * description of the error. */ typedef enum { CTL_LUN_LIST_NONE, CTL_LUN_LIST_OK, CTL_LUN_LIST_NEED_MORE_SPACE, CTL_LUN_LIST_ERROR } ctl_lun_list_status; /* * LUN list interface * * backend_name: This is a NUL-terminated string. If the string * length is 0, then all LUNs on all backends will * be enumerated. Otherwise this is the name of the * backend to be enumerated, like "ramdisk" or "block". * * alloc_len: The length of the data buffer allocated for entries. * In order to properly size the buffer, make one call * with alloc_len set to 0, and then use the returned * dropped_len as the buffer length to allocate and * pass in on a subsequent call. * * lun_xml: XML-formatted information on the requested LUNs. * * fill_len: The amount of data filled in the storage for entries. * * status: The status of the request. See above for the * description of the values of this field. * * error_str: If the status indicates an error, this string will * be filled in to describe the error. */ struct ctl_lun_list { char backend[CTL_BE_NAME_LEN]; /* passed to kernel*/ uint32_t alloc_len; /* passed to kernel */ char *lun_xml; /* filled in kernel */ uint32_t fill_len; /* passed to userland */ ctl_lun_list_status status; /* passed to userland */ char error_str[CTL_ERROR_STR_LEN]; /* passed to userland */ }; /* * Port request interface: * * driver: This is required, and is NUL-terminated a string * that is the name of the frontend, like "iscsi" . * * reqtype: The type of request, CTL_REQ_CREATE to create a * port, CTL_REQ_REMOVE to delete a port. * * num_be_args: This is the number of frontend-specific arguments * in the be_args array. * * be_args: This is an array of frontend-specific arguments. * See above for a description of the fields in this * structure. * * status: Status of the request. * * error_str: If the status is CTL_LUN_ERROR, this will * contain a string describing the error. * * kern_be_args: For kernel use only. */ typedef enum { CTL_REQ_CREATE, CTL_REQ_REMOVE, CTL_REQ_MODIFY, } ctl_req_type; struct ctl_req { char driver[CTL_DRIVER_NAME_LEN]; ctl_req_type reqtype; void * args; nvlist_t * args_nvl; size_t args_len; void * result; nvlist_t * result_nvl; size_t result_len; ctl_lun_status status; char error_str[CTL_ERROR_STR_LEN]; }; /* * iSCSI status * * OK: Request completed successfully. * * ERROR: An error occurred, look at the error string for a * description of the error. * * CTL_ISCSI_LIST_NEED_MORE_SPACE: * User has to pass larger buffer for CTL_ISCSI_LIST ioctl. */ typedef enum { CTL_ISCSI_OK, CTL_ISCSI_ERROR, CTL_ISCSI_LIST_NEED_MORE_SPACE, CTL_ISCSI_SESSION_NOT_FOUND } ctl_iscsi_status; typedef enum { CTL_ISCSI_HANDOFF, CTL_ISCSI_LIST, CTL_ISCSI_LOGOUT, CTL_ISCSI_TERMINATE, CTL_ISCSI_LIMITS, #if defined(ICL_KERNEL_PROXY) || 1 /* * We actually need those in all cases, but leave the ICL_KERNEL_PROXY, * to remember to remove them along with rest of proxy code, eventually. */ CTL_ISCSI_LISTEN, CTL_ISCSI_ACCEPT, CTL_ISCSI_SEND, CTL_ISCSI_RECEIVE, #endif } ctl_iscsi_type; typedef enum { CTL_ISCSI_DIGEST_NONE, CTL_ISCSI_DIGEST_CRC32C } ctl_iscsi_digest; #define CTL_ISCSI_NAME_LEN 224 /* 223 bytes, by RFC 3720, + '\0' */ #define CTL_ISCSI_ADDR_LEN 47 /* INET6_ADDRSTRLEN + '\0' */ #define CTL_ISCSI_ALIAS_LEN 128 /* Arbitrary. */ #define CTL_ISCSI_OFFLOAD_LEN 8 /* Arbitrary. */ struct ctl_iscsi_handoff_params { char initiator_name[CTL_ISCSI_NAME_LEN]; char initiator_addr[CTL_ISCSI_ADDR_LEN]; char initiator_alias[CTL_ISCSI_ALIAS_LEN]; uint8_t initiator_isid[6]; char target_name[CTL_ISCSI_NAME_LEN]; int socket; int portal_group_tag; /* * Connection parameters negotiated by ctld(8). */ ctl_iscsi_digest header_digest; ctl_iscsi_digest data_digest; uint32_t cmdsn; uint32_t statsn; int max_recv_data_segment_length; int max_burst_length; int first_burst_length; uint32_t immediate_data; char offload[CTL_ISCSI_OFFLOAD_LEN]; #ifdef ICL_KERNEL_PROXY int connection_id; #else int spare; #endif int max_send_data_segment_length; }; struct ctl_iscsi_list_params { uint32_t alloc_len; /* passed to kernel */ char *conn_xml; /* filled in kernel */ uint32_t fill_len; /* passed to userland */ int spare[4]; }; struct ctl_iscsi_logout_params { int connection_id; /* passed to kernel */ char initiator_name[CTL_ISCSI_NAME_LEN]; /* passed to kernel */ char initiator_addr[CTL_ISCSI_ADDR_LEN]; /* passed to kernel */ int all; /* passed to kernel */ int spare[4]; }; struct ctl_iscsi_terminate_params { int connection_id; /* passed to kernel */ char initiator_name[CTL_ISCSI_NAME_LEN]; /* passed to kernel */ char initiator_addr[CTL_ISCSI_NAME_LEN]; /* passed to kernel */ int all; /* passed to kernel */ int spare[4]; }; struct ctl_iscsi_limits_params { /* passed to kernel */ char offload[CTL_ISCSI_OFFLOAD_LEN]; int socket; /* passed to userland */ #ifdef __LP64__ int spare; #endif int max_recv_data_segment_length; int max_send_data_segment_length; int max_burst_length; int first_burst_length; }; #ifdef ICL_KERNEL_PROXY struct ctl_iscsi_listen_params { int iser; int domain; int socktype; int protocol; struct sockaddr *addr; socklen_t addrlen; int portal_id; int spare[4]; }; struct ctl_iscsi_accept_params { int connection_id; int portal_id; struct sockaddr *initiator_addr; socklen_t initiator_addrlen; int spare[4]; }; struct ctl_iscsi_send_params { int connection_id; void *bhs; size_t spare; void *spare2; size_t data_segment_len; void *data_segment; int spare3[4]; }; struct ctl_iscsi_receive_params { int connection_id; void *bhs; size_t spare; void *spare2; size_t data_segment_len; void *data_segment; int spare3[4]; }; #endif /* ICL_KERNEL_PROXY */ union ctl_iscsi_data { struct ctl_iscsi_handoff_params handoff; struct ctl_iscsi_list_params list; struct ctl_iscsi_logout_params logout; struct ctl_iscsi_terminate_params terminate; struct ctl_iscsi_limits_params limits; #ifdef ICL_KERNEL_PROXY struct ctl_iscsi_listen_params listen; struct ctl_iscsi_accept_params accept; struct ctl_iscsi_send_params send; struct ctl_iscsi_receive_params receive; #endif }; /* * iSCSI interface * * status: The status of the request. See above for the * description of the values of this field. * * error_str: If the status indicates an error, this string will * be filled in to describe the error. */ struct ctl_iscsi { ctl_iscsi_type type; /* passed to kernel */ union ctl_iscsi_data data; /* passed to kernel */ ctl_iscsi_status status; /* passed to userland */ char error_str[CTL_ERROR_STR_LEN]; /* passed to userland */ }; struct ctl_lun_map { uint32_t port; uint32_t plun; uint32_t lun; }; /* * NVMe over Fabrics status * * OK: Request completed successfully. * * ERROR: An error occurred, look at the error string for a * description of the error. */ typedef enum { CTL_NVMF_OK, CTL_NVMF_ERROR, CTL_NVMF_LIST_NEED_MORE_SPACE, CTL_NVMF_ASSOCIATION_NOT_FOUND } ctl_nvmf_status; typedef enum { CTL_NVMF_HANDOFF, CTL_NVMF_LIST, CTL_NVMF_TERMINATE } ctl_nvmf_type; struct ctl_nvmf_list_params { uint32_t alloc_len; /* passed to kernel */ char *conn_xml; /* filled in kernel */ uint32_t fill_len; /* passed to userland */ int spare[4]; }; struct ctl_nvmf_terminate_params { int cntlid; /* passed to kernel */ char hostnqn[NVME_NQN_FIELD_SIZE]; /* passed to kernel */ int all; /* passed to kernel */ int spare[4]; }; union ctl_nvmf_data { struct nvmf_ioc_nv handoff; struct ctl_nvmf_list_params list; struct ctl_nvmf_terminate_params terminate; }; /* * NVMe over Fabrics interface * * status: The status of the request. See above for the * description of the values of this field. * * error_str: If the status indicates an error, this string will * be filled in to describe the error. */ struct ctl_nvmf { ctl_nvmf_type type; /* passed to kernel */ union ctl_nvmf_data data; /* passed to kernel */ ctl_nvmf_status status; /* passed to userland */ char error_str[CTL_ERROR_STR_LEN]; /* passed to userland */ }; #define CTL_IO _IOWR(CTL_MINOR, 0x00, union ctl_io) #define CTL_ENABLE_PORT _IOW(CTL_MINOR, 0x04, struct ctl_port_entry) #define CTL_DISABLE_PORT _IOW(CTL_MINOR, 0x05, struct ctl_port_entry) #define CTL_DELAY_IO _IOWR(CTL_MINOR, 0x10, struct ctl_io_delay_info) #define CTL_ERROR_INJECT _IOWR(CTL_MINOR, 0x16, struct ctl_error_desc) #define CTL_GET_OOA _IOWR(CTL_MINOR, 0x18, struct ctl_ooa) #define CTL_DUMP_STRUCTS _IO(CTL_MINOR, 0x19) #define CTL_LUN_REQ _IOWR(CTL_MINOR, 0x21, struct ctl_lun_req) #define CTL_LUN_LIST _IOWR(CTL_MINOR, 0x22, struct ctl_lun_list) #define CTL_ERROR_INJECT_DELETE _IOW(CTL_MINOR, 0x23, struct ctl_error_desc) #define CTL_SET_PORT_WWNS _IOW(CTL_MINOR, 0x24, struct ctl_port_entry) #define CTL_ISCSI _IOWR(CTL_MINOR, 0x25, struct ctl_iscsi) #define CTL_PORT_REQ _IOWR(CTL_MINOR, 0x26, struct ctl_req) #define CTL_PORT_LIST _IOWR(CTL_MINOR, 0x27, struct ctl_lun_list) #define CTL_LUN_MAP _IOW(CTL_MINOR, 0x28, struct ctl_lun_map) #define CTL_GET_LUN_STATS _IOWR(CTL_MINOR, 0x29, struct ctl_get_io_stats) #define CTL_GET_PORT_STATS _IOWR(CTL_MINOR, 0x2a, struct ctl_get_io_stats) #define CTL_NVMF _IOWR(CTL_MINOR, 0x2b, struct ctl_nvmf) #endif /* _CTL_IOCTL_H_ */ /* * vim: ts=8 */
