/*-
 * Copyright (c) 1998 Robert Nordier
 * All rights reserved.
 * Copyright (c) 2001 Robert Drehmel
 * All rights reserved.
 * Copyright (c) 2014 Nathan Whitehorn
 * All rights reserved.
 * Copyright (c) 2015 Eric McCorkle
 * All rights reverved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <stdarg.h>
#include <stdbool.h>

#include <sys/param.h>
#include <sys/disk/bsd.h>
#include <efi.h>

#include "boot_module.h"

#define BSD_LABEL_BUFFER        8192
#define BSD_LABEL_OFFSET        DEV_BSIZE

static dev_info_t *devinfo;
static dev_info_t *devices;

static int
dskread(void *buf, uint64_t lba, int nblk)
{
        int size;
        EFI_STATUS status;

        lba += devinfo->partoff;
        lba = lba / (devinfo->dev->Media->BlockSize / DEV_BSIZE);
        size = nblk * DEV_BSIZE;

        status = devinfo->dev->ReadBlocks(devinfo->dev,
            devinfo->dev->Media->MediaId, lba, size, buf);

        if (status != EFI_SUCCESS) {
                DPRINTF("dskread: failed dev: %p, id: %u, lba: %ju, size: %d, "
                    "status: %lu\n", devinfo->dev,
                    devinfo->dev->Media->MediaId, (uintmax_t)lba, size,
                    DECODE_ERROR(status));
                return (-1);
        }

        return (0);
}

#include "ufsread.c"

static struct dmadat __dmadat __aligned(512);
static char ufs_buffer[BSD_LABEL_BUFFER] __aligned(512);

static int
init_dev(dev_info_t* dev)
{
        struct disklabel *dl;
        uint64_t bs;
        int ok;

        devinfo = dev;
        dmadat = &__dmadat;

        /*
         * First try offset 0. This is the typical GPT case where we have no
         * further partitioning (as well as the degenerate MBR case where
         * the bsdlabel has a 0 offset).
         */
        devinfo->partoff = 0;
        ok = fsread(0, NULL, 0);
        if (ok >= 0)
                return (ok);

        /*
         * Next, we look for a bsdlabel. This is technically located in sector
         * 1. For 4k sectors, this offset is 4096, for 512b sectors it's
         * 512. However, we have to fall back to 512 here because we create
         * images that assume 512 byte blocks, but these can be put on devices
         * who have 4k (or other) block sizes. If there's a crazy block size, we
         * skip the 'at one sector' and go stright to checking at 512 bytes.
         * There are other offsets that are historic, but we don't probe those
         * since they were never used for MBR disks on FreeBSD on systems that
         * could boot UEFI. UEFI is little endian only, as are BSD labels. We
         * will retry fsread(0) only if there's a label found with a non-zero
         * offset.
         */
        if (dskread(ufs_buffer, 0, BSD_LABEL_BUFFER / DEV_BSIZE) != 0)
                return (-1);
        dl = NULL;
        bs = devinfo->dev->Media->BlockSize;
        if (bs != 0 && bs <= BSD_LABEL_BUFFER / 2)
                dl = (struct disklabel *)&ufs_buffer[bs];
        if (dl == NULL || dl->d_magic != BSD_MAGIC || dl->d_magic2 != BSD_MAGIC)
                dl = (struct disklabel *)&ufs_buffer[BSD_LABEL_OFFSET];
        if (dl->d_magic != BSD_MAGIC || dl->d_magic2 != BSD_MAGIC ||
            dl->d_partitions[0].p_offset == 0)
                return (-1);
        devinfo->partoff = dl->d_partitions[0].p_offset;
        return (fsread(0, NULL, 0));
}

static EFI_STATUS
probe(dev_info_t* dev)
{

        if (init_dev(dev) < 0)
                return (EFI_UNSUPPORTED);

        add_device(&devices, dev);

        return (EFI_SUCCESS);
}

static EFI_STATUS
load(const char *filepath, dev_info_t *dev, void **bufp, size_t *bufsize)
{
        ufs_ino_t ino;
        size_t size;
        ssize_t read;
        void *buf;

#ifdef EFI_DEBUG
        {
                CHAR16 *text = efi_devpath_name(dev->devpath);
                DPRINTF("UFS Loading '%s' from %S\n", filepath, text);
                efi_free_devpath_name(text);
        }
#endif
        if (init_dev(dev) < 0) {
                DPRINTF("Failed to init device\n");
                return (EFI_UNSUPPORTED);
        }

        if ((ino = lookup(filepath)) == 0) {
                DPRINTF("Failed to lookup '%s' (file not found?)\n", filepath);
                return (EFI_NOT_FOUND);
        }

        if (fsread_size(ino, NULL, 0, &size) < 0 || size <= 0) {
                printf("Failed to read size of '%s' ino: %d\n", filepath, ino);
                return (EFI_INVALID_PARAMETER);
        }

        buf = malloc(size);
        if (buf == NULL) {
                printf("Failed to allocate read buffer %zu for '%s'\n",
                    size, filepath);
                return (EFI_OUT_OF_RESOURCES);
        }

        read = fsread(ino, buf, size);
        if ((size_t)read != size) {
                printf("Failed to read '%s' (%zd != %zu)\n", filepath, read,
                    size);
                free(buf);
                return (EFI_INVALID_PARAMETER);
        }

        DPRINTF("Load complete\n");

        *bufp = buf;
        *bufsize = size;

        return (EFI_SUCCESS);
}

static void
status(void)
{
        int i;
        dev_info_t *dev;

        for (dev = devices, i = 0; dev != NULL; dev = dev->next, i++)
                ;

        printf("%s found ", ufs_module.name);
        switch (i) {
        case 0:
                printf("no partitions\n");
                break;
        case 1:
                printf("%d partition\n", i);
                break;
        default:
                printf("%d partitions\n", i);
        }
}

static dev_info_t *
_devices(void)
{

        return (devices);
}

const boot_module_t ufs_module =
{
        .name = "UFS",
        .probe = probe,
        .load = load,
        .status = status,
        .devices = _devices
};