/*      $OpenBSD: dwc2_coreintr.c,v 1.14 2022/09/08 19:32:54 mglocker Exp $     */
/*      $NetBSD: dwc2_coreintr.c,v 1.8 2014/04/04 05:40:57 skrll Exp $  */

/*
 * core_intr.c - DesignWare HS OTG Controller common interrupt handling
 *
 * Copyright (C) 2004-2013 Synopsys, Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The names of the above-listed copyright holders may not be used
 *    to endorse or promote products derived from this software without
 *    specific prior written permission.
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation; either version 2 of the License, or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * This file contains the common interrupt handlers
 */
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/mutex.h>
#include <sys/pool.h>
#include <sys/timeout.h>

#include <lib/libkern/libkern.h>

#include <machine/bus.h>

#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdivar.h>
#include <dev/usb/usb_mem.h>

#include <dev/usb/dwc2/dwc2.h>
#include <dev/usb/dwc2/dwc2var.h>

#include <dev/usb/dwc2/dwc2_core.h>
#include <dev/usb/dwc2/dwc2_hcd.h>

STATIC const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg)
{
        switch (hsotg->op_state) {
        case OTG_STATE_A_HOST:
                return "a_host";
        case OTG_STATE_A_SUSPEND:
                return "a_suspend";
        case OTG_STATE_A_PERIPHERAL:
                return "a_peripheral";
        case OTG_STATE_B_PERIPHERAL:
                return "b_peripheral";
        case OTG_STATE_B_HOST:
                return "b_host";
        default:
                return "unknown";
        }
}

/**
 * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts.
 * When the PRTINT interrupt fires, there are certain status bits in the Host
 * Port that needs to get cleared.
 *
 * @hsotg: Programming view of DWC_otg controller
 */
STATIC void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
{
        u32 hprt0 = dwc2_readl(hsotg, HPRT0);

        if (hprt0 & HPRT0_ENACHG) {
                hprt0 &= ~HPRT0_ENA;
                dwc2_writel(hsotg, hprt0, HPRT0);
        }
}

/**
 * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message
 *
 * @hsotg: Programming view of DWC_otg controller
 */
STATIC void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg)
{
        /* Clear interrupt */
        dwc2_writel(hsotg, GINTSTS_MODEMIS, GINTSTS);

        dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n",
                 dwc2_is_host_mode(hsotg) ? "Host" : "Device");
}

/**
 * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG
 * Interrupt Register (GOTGINT) to determine what interrupt has occurred.
 *
 * @hsotg: Programming view of DWC_otg controller
 */
STATIC void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
{
        u32 gotgint;
        u32 gotgctl;
        u32 gintmsk;

        gotgint = dwc2_readl(hsotg, GOTGINT);
        gotgctl = dwc2_readl(hsotg, GOTGCTL);
        dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint,
                dwc2_op_state_str(hsotg));

        if (gotgint & GOTGINT_SES_END_DET) {
                dev_dbg(hsotg->dev,
                        " ++OTG Interrupt: Session End Detected++ (%s)\n",
                        dwc2_op_state_str(hsotg));
                gotgctl = dwc2_readl(hsotg, GOTGCTL);

                if (dwc2_is_device_mode(hsotg))
                        dwc2_hsotg_disconnect(hsotg);

                if (hsotg->op_state == OTG_STATE_B_HOST) {
                        hsotg->op_state = OTG_STATE_B_PERIPHERAL;
                } else {
                        /*
                         * If not B_HOST and Device HNP still set, HNP did
                         * not succeed!
                         */
                        if (gotgctl & GOTGCTL_DEVHNPEN) {
                                dev_dbg(hsotg->dev, "Session End Detected\n");
                                dev_err(hsotg->dev,
                                        "Device Not Connected/Responding!\n");
                        }

                        /*
                         * If Session End Detected the B-Cable has been
                         * disconnected
                         */
                        /* Reset to a clean state */
                        hsotg->lx_state = DWC2_L0;
                }

                gotgctl = dwc2_readl(hsotg, GOTGCTL);
                gotgctl &= ~GOTGCTL_DEVHNPEN;
                dwc2_writel(hsotg, gotgctl, GOTGCTL);
        }

        if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) {
                dev_dbg(hsotg->dev,
                        " ++OTG Interrupt: Session Request Success Status Change++\n");
                gotgctl = dwc2_readl(hsotg, GOTGCTL);
                if (gotgctl & GOTGCTL_SESREQSCS) {
                        if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS &&
                            hsotg->params.i2c_enable) {
                                hsotg->srp_success = 1;
                        } else {
                                /* Clear Session Request */
                                gotgctl = dwc2_readl(hsotg, GOTGCTL);
                                gotgctl &= ~GOTGCTL_SESREQ;
                                dwc2_writel(hsotg, gotgctl, GOTGCTL);
                        }
                }
        }

        if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) {
                /*
                 * Print statements during the HNP interrupt handling
                 * can cause it to fail
                 */
                gotgctl = dwc2_readl(hsotg, GOTGCTL);
                /*
                 * WA for 3.00a- HW is not setting cur_mode, even sometimes
                 * this does not help
                 */
                if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a)
                        udelay(100);
                if (gotgctl & GOTGCTL_HSTNEGSCS) {
                        if (dwc2_is_host_mode(hsotg)) {
                                hsotg->op_state = OTG_STATE_B_HOST;
                                /*
                                 * Need to disable SOF interrupt immediately.
                                 * When switching from device to host, the PCD
                                 * interrupt handler won't handle the interrupt
                                 * if host mode is already set. The HCD
                                 * interrupt handler won't get called if the
                                 * HCD state is HALT. This means that the
                                 * interrupt does not get handled and Linux
                                 * complains loudly.
                                 */
                                gintmsk = dwc2_readl(hsotg, GINTMSK);
                                gintmsk &= ~GINTSTS_SOF;
                                dwc2_writel(hsotg, gintmsk, GINTMSK);

                                /*
                                 * Call callback function with spin lock
                                 * released
                                 */
                                spin_unlock(&hsotg->lock);

                                /* Initialize the Core for Host mode */
                                dwc2_hcd_start(hsotg);
                                spin_lock(&hsotg->lock);
                                hsotg->op_state = OTG_STATE_B_HOST;
                        }
                } else {
                        gotgctl = dwc2_readl(hsotg, GOTGCTL);
                        gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN);
                        dwc2_writel(hsotg, gotgctl, GOTGCTL);
                        dev_dbg(hsotg->dev, "HNP Failed\n");
                        dev_err(hsotg->dev,
                                "Device Not Connected/Responding\n");
                }
        }

        if (gotgint & GOTGINT_HST_NEG_DET) {
                /*
                 * The disconnect interrupt is set at the same time as
                 * Host Negotiation Detected. During the mode switch all
                 * interrupts are cleared so the disconnect interrupt
                 * handler will not get executed.
                 */
                dev_dbg(hsotg->dev,
                        " ++OTG Interrupt: Host Negotiation Detected++ (%s)\n",
                        (dwc2_is_host_mode(hsotg) ? "Host" : "Device"));
                if (dwc2_is_device_mode(hsotg)) {
                        dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n",
                                hsotg->op_state);
                        spin_unlock(&hsotg->lock);
                        dwc2_hcd_disconnect(hsotg, false);
                        spin_lock(&hsotg->lock);
                        hsotg->op_state = OTG_STATE_A_PERIPHERAL;
                } else {
                        /* Need to disable SOF interrupt immediately */
                        gintmsk = dwc2_readl(hsotg, GINTMSK);
                        gintmsk &= ~GINTSTS_SOF;
                        dwc2_writel(hsotg, gintmsk, GINTMSK);
                        spin_unlock(&hsotg->lock);
                        dwc2_hcd_start(hsotg);
                        spin_lock(&hsotg->lock);
                        hsotg->op_state = OTG_STATE_A_HOST;
                }
        }

        if (gotgint & GOTGINT_A_DEV_TOUT_CHG)
                dev_dbg(hsotg->dev,
                        " ++OTG Interrupt: A-Device Timeout Change++\n");
        if (gotgint & GOTGINT_DBNCE_DONE)
                dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n");

        /* Clear GOTGINT */
        dwc2_writel(hsotg, gotgint, GOTGINT);
}

/**
 * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status
 * Change Interrupt
 *
 * @hsotg: Programming view of DWC_otg controller
 *
 * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a
 * Device to Host Mode transition or a Host to Device Mode transition. This only
 * occurs when the cable is connected/removed from the PHY connector.
 */
STATIC void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
{
        u32 gintmsk;

        /* Clear interrupt */
        dwc2_writel(hsotg, GINTSTS_CONIDSTSCHNG, GINTSTS);

        /* Need to disable SOF interrupt immediately */
        gintmsk = dwc2_readl(hsotg, GINTMSK);
        gintmsk &= ~GINTSTS_SOF;
        dwc2_writel(hsotg, gintmsk, GINTMSK);

        dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++  (%s)\n",
                dwc2_is_host_mode(hsotg) ? "Host" : "Device");

        /*
         * Need to schedule a work, as there are possible DELAY function calls.
         */
        if (hsotg->wq_otg)
                task_add(hsotg->wq_otg, &hsotg->wf_otg);
}

/**
 * dwc2_handle_session_req_intr() - This interrupt indicates that a device is
 * initiating the Session Request Protocol to request the host to turn on bus
 * power so a new session can begin
 *
 * @hsotg: Programming view of DWC_otg controller
 *
 * This handler responds by turning on bus power. If the DWC_otg controller is
 * in low power mode, this handler brings the controller out of low power mode
 * before turning on bus power.
 */
STATIC void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
{
        int ret;
        u32 hprt0;

        /* Clear interrupt */
        dwc2_writel(hsotg, GINTSTS_SESSREQINT, GINTSTS);

        dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n",
                hsotg->lx_state);

        if (dwc2_is_device_mode(hsotg)) {
                if (hsotg->lx_state == DWC2_L2) {
                        if (hsotg->in_ppd) {
                                ret = dwc2_exit_partial_power_down(hsotg, 0,
                                                                   true);
                                if (ret)
                                        dev_err(hsotg->dev,
                                                "exit power_down failed\n");
                        }

                        /* Exit gadget mode clock gating. */
                        if (hsotg->params.power_down ==
                            DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
                                dwc2_gadget_exit_clock_gating(hsotg, 0);
                }

                /*
                 * Report disconnect if there is any previous session
                 * established
                 */
                dwc2_hsotg_disconnect(hsotg);
        } else {
                /* Turn on the port power bit. */
                hprt0 = dwc2_read_hprt0(hsotg);
                hprt0 |= HPRT0_PWR;
                dwc2_writel(hsotg, hprt0, HPRT0);
                /* Connect hcd after port power is set. */
                dwc2_hcd_connect(hsotg);
        }
}

/**
 * dwc2_wakeup_from_lpm_l1 - Exit the device from LPM L1 state
 *
 * @hsotg: Programming view of DWC_otg controller
 *
 */
static void dwc2_wakeup_from_lpm_l1(struct dwc2_hsotg *hsotg)
{
        u32 glpmcfg;
        u32 i = 0;

        if (hsotg->lx_state != DWC2_L1) {
                dev_err(hsotg->dev, "Core isn't in DWC2_L1 state\n");
                return;
        }

        glpmcfg = dwc2_readl(hsotg, GLPMCFG);
        if (dwc2_is_device_mode(hsotg)) {
                dev_dbg(hsotg->dev, "Exit from L1 state\n");
                glpmcfg &= ~GLPMCFG_ENBLSLPM;
                glpmcfg &= ~GLPMCFG_HIRD_THRES_EN;
                dwc2_writel(hsotg, glpmcfg, GLPMCFG);

                do {
                        glpmcfg = dwc2_readl(hsotg, GLPMCFG);

                        if (!(glpmcfg & (GLPMCFG_COREL1RES_MASK |
                                         GLPMCFG_L1RESUMEOK | GLPMCFG_SLPSTS)))
                                break;

                        udelay(1);
                } while (++i < 200);

                if (i == 200) {
                        dev_err(hsotg->dev, "Failed to exit L1 sleep state in 200us.\n");
                        return;
                }
                dwc2_gadget_init_lpm(hsotg);
        } else {
                /* TODO */
                dev_err(hsotg->dev, "Host side LPM is not supported.\n");
                return;
        }

        /* Change to L0 state */
        hsotg->lx_state = DWC2_L0;

        /* Inform gadget to exit from L1 */
        call_gadget(hsotg, resume);
}

/*
 * This interrupt indicates that the DWC_otg controller has detected a
 * resume or remote wakeup sequence. If the DWC_otg controller is in
 * low power mode, the handler must brings the controller out of low
 * power mode. The controller automatically begins resume signaling.
 * The handler schedules a time to stop resume signaling.
 */
STATIC void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
{
        int ret;

        /* Clear interrupt */
        dwc2_writel(hsotg, GINTSTS_WKUPINT, GINTSTS);

        dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n");
        dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state);

        if (hsotg->lx_state == DWC2_L1) {
                dwc2_wakeup_from_lpm_l1(hsotg);
                return;
        }

        if (dwc2_is_device_mode(hsotg)) {
                dev_dbg(hsotg->dev, "DSTS=0x%0x\n",
                        dwc2_readl(hsotg, DSTS));
                if (hsotg->lx_state == DWC2_L2) {
                        if (hsotg->in_ppd) {
                                u32 dctl = dwc2_readl(hsotg, DCTL);
                                /* Clear Remote Wakeup Signaling */
                                dctl &= ~DCTL_RMTWKUPSIG;
                                dwc2_writel(hsotg, dctl, DCTL);
                                ret = dwc2_exit_partial_power_down(hsotg, 1,
                                                                   true);
                                if (ret)
                                        dev_err(hsotg->dev,
                                                "exit partial_power_down failed\n");
                                call_gadget(hsotg, resume);
                        }

                        /* Exit gadget mode clock gating. */
                        if (hsotg->params.power_down ==
                            DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
                                dwc2_gadget_exit_clock_gating(hsotg, 0);
                } else {
                        /* Change to L0 state */
                        hsotg->lx_state = DWC2_L0;
                }
        } else {
                if (hsotg->lx_state == DWC2_L2) {
                        if (hsotg->in_ppd) {
                                ret = dwc2_exit_partial_power_down(hsotg, 1,
                                                                   true);
                                if (ret)
                                        dev_err(hsotg->dev,
                                                "exit partial_power_down failed\n");
                        }

                        if (hsotg->params.power_down ==
                            DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
                                dwc2_host_exit_clock_gating(hsotg, 1);

                        /*
                         * If we've got this quirk then the PHY is stuck upon
                         * wakeup.  Assert reset.  This will propagate out and
                         * eventually we'll re-enumerate the device.  Not great
                         * but the best we can do.  We can't call phy_reset()
                         * at interrupt time but there's no hurry, so we'll
                         * schedule it for later.
                         */
                        if (hsotg->reset_phy_on_wake)
                                dwc2_host_schedule_phy_reset(hsotg);

                        timeout_add_msec(&hsotg->wkp_timer, 71);
                } else {
                        /* Change to L0 state */
                        hsotg->lx_state = DWC2_L0;
                }
        }
}

/*
 * This interrupt indicates that a device has been disconnected from the
 * root port
 */
STATIC void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg)
{
        dwc2_writel(hsotg, GINTSTS_DISCONNINT, GINTSTS);

        dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n",
                dwc2_is_host_mode(hsotg) ? "Host" : "Device",
                dwc2_op_state_str(hsotg));

        if (hsotg->op_state == OTG_STATE_A_HOST)
                dwc2_hcd_disconnect(hsotg, false);
}

/*
 * This interrupt indicates that SUSPEND state has been detected on the USB.
 *
 * For HNP the USB Suspend interrupt signals the change from "a_peripheral"
 * to "a_host".
 *
 * When power management is enabled the core will be put in low power mode.
 */
STATIC void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
{
        u32 dsts;
        int ret;

        /* Clear interrupt */
        dwc2_writel(hsotg, GINTSTS_USBSUSP, GINTSTS);

        dev_dbg(hsotg->dev, "USB SUSPEND\n");

        if (dwc2_is_device_mode(hsotg)) {
                /*
                 * Check the Device status register to determine if the Suspend
                 * state is active
                 */
                dsts = dwc2_readl(hsotg, DSTS);
                dev_dbg(hsotg->dev, "%s: DSTS=0x%0x\n", __func__, dsts);
                dev_dbg(hsotg->dev,
                        "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d HWCFG4.Hibernation=%d\n",
                        !!(dsts & DSTS_SUSPSTS),
                        hsotg->hw_params.power_optimized,
                        hsotg->hw_params.hibernation);

                /* Ignore suspend request before enumeration */
                if (!dwc2_is_device_connected(hsotg)) {
                        dev_dbg(hsotg->dev,
                                "ignore suspend request before enumeration\n");
                        return;
                }
                if (dsts & DSTS_SUSPSTS) {
                        switch (hsotg->params.power_down) {
                        case DWC2_POWER_DOWN_PARAM_PARTIAL:
                                ret = dwc2_enter_partial_power_down(hsotg);
                                if (ret)
                                        dev_err(hsotg->dev,
                                                "enter partial_power_down failed\n");

                                udelay(100);

                                /* Ask phy to be suspended */
#if 0
                                if (!IS_ERR_OR_NULL(hsotg->uphy))
                                        usb_phy_set_suspend(hsotg->uphy, true);
#endif
                                break;
                        case DWC2_POWER_DOWN_PARAM_HIBERNATION:
                                ret = dwc2_enter_hibernation(hsotg, 0);
                                if (ret)
                                        dev_err(hsotg->dev,
                                                "enter hibernation failed\n");
                                break;
                        case DWC2_POWER_DOWN_PARAM_NONE:
                                /*
                                 * If neither hibernation nor partial power down are supported,
                                 * clock gating is used to save power.
                                 */
                                if (!hsotg->params.no_clock_gating)
                                        dwc2_gadget_enter_clock_gating(hsotg);
                        }

                        /*
                         * Change to L2 (suspend) state before releasing
                         * spinlock
                         */
                        hsotg->lx_state = DWC2_L2;

                        /* Call gadget suspend callback */
                        call_gadget(hsotg, suspend);
                }
        } else {
                if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) {
                        dev_dbg(hsotg->dev, "a_peripheral->a_host\n");

                        /* Change to L2 (suspend) state */
                        hsotg->lx_state = DWC2_L2;
                        /* Clear the a_peripheral flag, back to a_host */
                        spin_unlock(&hsotg->lock);
                        dwc2_hcd_start(hsotg);
                        spin_lock(&hsotg->lock);
                        hsotg->op_state = OTG_STATE_A_HOST;
                }
        }
}

/**
 * dwc2_handle_lpm_intr - GINTSTS_LPMTRANRCVD Interrupt handler
 *
 * @hsotg: Programming view of DWC_otg controller
 *
 */
static void dwc2_handle_lpm_intr(struct dwc2_hsotg *hsotg)
{
        u32 glpmcfg;
        u32 pcgcctl;
        u32 hird;
        u32 hird_thres;
        u32 hird_thres_en;
        u32 enslpm;

        /* Clear interrupt */
        dwc2_writel(hsotg, GINTSTS_LPMTRANRCVD, GINTSTS);

        glpmcfg = dwc2_readl(hsotg, GLPMCFG);

        if (!(glpmcfg & GLPMCFG_LPMCAP)) {
                dev_err(hsotg->dev, "Unexpected LPM interrupt\n");
                return;
        }

        hird = (glpmcfg & GLPMCFG_HIRD_MASK) >> GLPMCFG_HIRD_SHIFT;
        hird_thres = (glpmcfg & GLPMCFG_HIRD_THRES_MASK &
                        ~GLPMCFG_HIRD_THRES_EN) >> GLPMCFG_HIRD_THRES_SHIFT;
        hird_thres_en = glpmcfg & GLPMCFG_HIRD_THRES_EN;
        enslpm = glpmcfg & GLPMCFG_ENBLSLPM;

        if (dwc2_is_device_mode(hsotg)) {
                dev_dbg(hsotg->dev, "HIRD_THRES_EN = %d\n", hird_thres_en);

                if (hird_thres_en && hird >= hird_thres) {
                        dev_dbg(hsotg->dev, "L1 with utmi_l1_suspend_n\n");
                } else if (enslpm) {
                        dev_dbg(hsotg->dev, "L1 with utmi_sleep_n\n");
                } else {
                        dev_dbg(hsotg->dev, "Entering Sleep with L1 Gating\n");

                        pcgcctl = dwc2_readl(hsotg, PCGCTL);
                        pcgcctl |= PCGCTL_ENBL_SLEEP_GATING;
                        dwc2_writel(hsotg, pcgcctl, PCGCTL);
                }
                /**
                 * Examine prt_sleep_sts after TL1TokenTetry period max (10 us)
                 */
                udelay(10);

                glpmcfg = dwc2_readl(hsotg, GLPMCFG);

                if (glpmcfg & GLPMCFG_SLPSTS) {
                        /* Save the current state */
                        hsotg->lx_state = DWC2_L1;
                        dev_dbg(hsotg->dev,
                                "Core is in L1 sleep glpmcfg=%08x\n", glpmcfg);

                        /* Inform gadget that we are in L1 state */
                        call_gadget(hsotg, suspend);
                }
        }
}

#define GINTMSK_COMMON  (GINTSTS_WKUPINT | GINTSTS_SESSREQINT |         \
                         GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT |        \
                         GINTSTS_MODEMIS | GINTSTS_DISCONNINT |         \
                         GINTSTS_USBSUSP | GINTSTS_PRTINT |             \
                         GINTSTS_LPMTRANRCVD)

/*
 * This function returns the Core Interrupt register
 */
STATIC u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg)
{
        u32 gintsts;
        u32 gintmsk;
        u32 gahbcfg;
        u32 gintmsk_common = GINTMSK_COMMON;

        gintsts = dwc2_readl(hsotg, GINTSTS);
        gintmsk = dwc2_readl(hsotg, GINTMSK);
        gahbcfg = dwc2_readl(hsotg, GAHBCFG);

        /* If any common interrupts set */
        if (gintsts & gintmsk_common)
                dev_dbg(hsotg->dev, "gintsts=%08x  gintmsk=%08x\n",
                        gintsts, gintmsk);

        if (gahbcfg & GAHBCFG_GLBL_INTR_EN)
                return gintsts & gintmsk & gintmsk_common;
        else
                return 0;
}

/**
 * dwc_handle_gpwrdn_disc_det() - Handles the gpwrdn disconnect detect.
 * Exits hibernation without restoring registers.
 *
 * @hsotg: Programming view of DWC_otg controller
 * @gpwrdn: GPWRDN register
 */
static inline void dwc_handle_gpwrdn_disc_det(struct dwc2_hsotg *hsotg,
                                              u32 gpwrdn)
{
        u32 gpwrdn_tmp;

        /* Switch-on voltage to the core */
        gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
        gpwrdn_tmp &= ~GPWRDN_PWRDNSWTCH;
        dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
        udelay(5);

        /* Reset core */
        gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
        gpwrdn_tmp &= ~GPWRDN_PWRDNRSTN;
        dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
        udelay(5);

        /* Disable Power Down Clamp */
        gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
        gpwrdn_tmp &= ~GPWRDN_PWRDNCLMP;
        dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
        udelay(5);

        /* Deassert reset core */
        gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
        gpwrdn_tmp |= GPWRDN_PWRDNRSTN;
        dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
        udelay(5);

        /* Disable PMU interrupt */
        gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
        gpwrdn_tmp &= ~GPWRDN_PMUINTSEL;
        dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);

        /* De-assert Wakeup Logic */
        gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
        gpwrdn_tmp &= ~GPWRDN_PMUACTV;
        dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);

        hsotg->hibernated = 0;
        hsotg->bus_suspended = 0;

        if (gpwrdn & GPWRDN_IDSTS) {
                hsotg->op_state = OTG_STATE_B_PERIPHERAL;
                dwc2_core_init(hsotg, false);
                dwc2_enable_global_interrupts(hsotg);
                dwc2_hsotg_core_init_disconnected(hsotg, false);
                dwc2_hsotg_core_connect(hsotg);
        } else {
                hsotg->op_state = OTG_STATE_A_HOST;

                /* Initialize the Core for Host mode */
                dwc2_core_init(hsotg, false);
                dwc2_enable_global_interrupts(hsotg);
                dwc2_hcd_start(hsotg);
        }
}

/*
 * GPWRDN interrupt handler.
 *
 * The GPWRDN interrupts are those that occur in both Host and
 * Device mode while core is in hibernated state.
 */
static int dwc2_handle_gpwrdn_intr(struct dwc2_hsotg *hsotg)
{
        u32 gpwrdn;
        int linestate;
        int ret = 0;

        gpwrdn = dwc2_readl(hsotg, GPWRDN);
        /* clear all interrupt */
        dwc2_writel(hsotg, gpwrdn, GPWRDN);
        linestate = (gpwrdn & GPWRDN_LINESTATE_MASK) >> GPWRDN_LINESTATE_SHIFT;
        dev_dbg(hsotg->dev,
                "%s: dwc2_handle_gpwrdwn_intr called gpwrdn= %08x\n", __func__,
                gpwrdn);

        if ((gpwrdn & GPWRDN_DISCONN_DET) &&
            (gpwrdn & GPWRDN_DISCONN_DET_MSK) && !linestate) {
                dev_dbg(hsotg->dev, "%s: GPWRDN_DISCONN_DET\n", __func__);
                /*
                 * Call disconnect detect function to exit from
                 * hibernation
                 */
                dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn);
        } else if ((gpwrdn & GPWRDN_LNSTSCHG) &&
                   (gpwrdn & GPWRDN_LNSTSCHG_MSK) && linestate) {
                dev_dbg(hsotg->dev, "%s: GPWRDN_LNSTSCHG\n", __func__);
                if (hsotg->hw_params.hibernation &&
                    hsotg->hibernated) {
                        if (gpwrdn & GPWRDN_IDSTS) {
                                ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
                                if (ret)
                                        dev_err(hsotg->dev,
                                                "exit hibernation failed.\n");
                                call_gadget(hsotg, resume);
                        } else {
                                ret = dwc2_exit_hibernation(hsotg, 1, 0, 1);
                                if (ret)
                                        dev_err(hsotg->dev,
                                                "exit hibernation failed.\n");
                        }
                }
        } else if ((gpwrdn & GPWRDN_RST_DET) &&
                   (gpwrdn & GPWRDN_RST_DET_MSK)) {
                dev_dbg(hsotg->dev, "%s: GPWRDN_RST_DET\n", __func__);
                if (!linestate) {
                        ret = dwc2_exit_hibernation(hsotg, 0, 1, 0);
                        if (ret)
                                dev_err(hsotg->dev,
                                        "exit hibernation failed.\n");
                }
        } else if ((gpwrdn & GPWRDN_STS_CHGINT) &&
                   (gpwrdn & GPWRDN_STS_CHGINT_MSK)) {
                dev_dbg(hsotg->dev, "%s: GPWRDN_STS_CHGINT\n", __func__);
                /*
                 * As GPWRDN_STS_CHGINT exit from hibernation flow is
                 * the same as in GPWRDN_DISCONN_DET flow. Call
                 * disconnect detect helper function to exit from
                 * hibernation.
                 */
                dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn);
        }

        return ret;
}

/*
 * Common interrupt handler
 *
 * The common interrupts are those that occur in both Host and Device mode.
 * This handler handles the following interrupts:
 * - Mode Mismatch Interrupt
 * - OTG Interrupt
 * - Connector ID Status Change Interrupt
 * - Disconnect Interrupt
 * - Session Request Interrupt
 * - Resume / Remote Wakeup Detected Interrupt
 * - Suspend Interrupt
 */
irqreturn_t dwc2_handle_common_intr(void *dev)
{
        struct dwc2_hsotg *hsotg = dev;
        u32 gintsts;
        irqreturn_t retval = IRQ_NONE;

        spin_lock(&hsotg->lock);

        if (!dwc2_is_controller_alive(hsotg)) {
                dev_warn(hsotg->dev, "Controller is dead\n");
                goto out;
        }

        /* Reading current frame number value in device or host modes. */
        if (dwc2_is_device_mode(hsotg))
                hsotg->frame_number = (dwc2_readl(hsotg, DSTS)
                                       & DSTS_SOFFN_MASK) >> DSTS_SOFFN_SHIFT;
        else
                hsotg->frame_number = (dwc2_readl(hsotg, HFNUM)
                                       & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;

        gintsts = dwc2_read_common_intr(hsotg);
        if (gintsts & ~GINTSTS_PRTINT)
                retval = IRQ_HANDLED;

        /* In case of hibernated state gintsts must not work */
        if (hsotg->hibernated) {
                dwc2_handle_gpwrdn_intr(hsotg);
                retval = IRQ_HANDLED;
                goto out;
        }

        if (gintsts & GINTSTS_MODEMIS)
                dwc2_handle_mode_mismatch_intr(hsotg);
        if (gintsts & GINTSTS_OTGINT)
                dwc2_handle_otg_intr(hsotg);
        if (gintsts & GINTSTS_CONIDSTSCHNG)
                dwc2_handle_conn_id_status_change_intr(hsotg);
        if (gintsts & GINTSTS_DISCONNINT)
                dwc2_handle_disconnect_intr(hsotg);
        if (gintsts & GINTSTS_SESSREQINT)
                dwc2_handle_session_req_intr(hsotg);
        if (gintsts & GINTSTS_WKUPINT)
                dwc2_handle_wakeup_detected_intr(hsotg);
        if (gintsts & GINTSTS_USBSUSP)
                dwc2_handle_usb_suspend_intr(hsotg);
        if (gintsts & GINTSTS_LPMTRANRCVD)
                dwc2_handle_lpm_intr(hsotg);

        if (gintsts & GINTSTS_PRTINT) {
                /*
                 * The port interrupt occurs while in device mode with HPRT0
                 * Port Enable/Disable
                 */
                if (dwc2_is_device_mode(hsotg)) {
                        dev_dbg(hsotg->dev,
                                " --Port interrupt received in Device mode--\n");
                        dwc2_handle_usb_port_intr(hsotg);
                        retval = IRQ_HANDLED;
                }
        }

out:
        spin_unlock(&hsotg->lock);
        return retval;
}