sys/dev/usb/if_upgt.c

root/sys/dev/usb/if_upgt.c
/*      $OpenBSD: if_upgt.c,v 1.90 2024/05/23 03:21:09 jsg Exp $ */

/*
 * Copyright (c) 2007 Marcus Glocker <mglocker@openbsd.org>
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#include "bpfilter.h"

#include <sys/param.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/systm.h>
#include <sys/timeout.h>
#include <sys/device.h>
#include <sys/endian.h>

#include <machine/intr.h>

#if NBPFILTER > 0
#include <net/bpf.h>
#endif
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>

#include <netinet/in.h>
#include <netinet/if_ether.h>

#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_radiotap.h>

#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usbdevs.h>

#include <dev/usb/if_upgtvar.h>

/*
 * Driver for the USB PrismGT devices.
 *
 * For now just USB 2.0 devices with the GW3887 chipset are supported.
 * The driver has been written based on the firmware version 2.13.1.0_LM87.
 *
 * TODO's:
 * - Fix MONITOR mode (MAC filter).
 * - Add HOSTAP mode.
 * - Add IBSS mode.
 * - Support the USB 1.0 devices (NET2280, ISL3880, ISL3886 chipsets).
 *
 * Parts of this driver has been influenced by reading the p54u driver
 * written by Jean-Baptiste Note <jean-baptiste.note@m4x.org> and
 * Sebastien Bourdeauducq <lekernel@prism54.org>.
 */

#ifdef UPGT_DEBUG
int upgt_debug = 2;
#define DPRINTF(l, x...) do { if ((l) <= upgt_debug) printf(x); } while (0)
#else
#define DPRINTF(l, x...)
#endif

/*
 * Prototypes.
 */
int             upgt_match(struct device *, void *, void *);
void            upgt_attach(struct device *, struct device *, void *);
void            upgt_attach_hook(struct device *);
int             upgt_detach(struct device *, int);

int             upgt_device_type(struct upgt_softc *, uint16_t, uint16_t);
int             upgt_device_init(struct upgt_softc *);
int             upgt_mem_init(struct upgt_softc *);
uint32_t        upgt_mem_alloc(struct upgt_softc *);
void            upgt_mem_free(struct upgt_softc *, uint32_t);
int             upgt_fw_alloc(struct upgt_softc *);
void            upgt_fw_free(struct upgt_softc *);
int             upgt_fw_verify(struct upgt_softc *);
int             upgt_fw_load(struct upgt_softc *);
int             upgt_fw_copy(char *, char *, int);
int             upgt_eeprom_read(struct upgt_softc *);
int             upgt_eeprom_parse(struct upgt_softc *);
void            upgt_eeprom_parse_hwrx(struct upgt_softc *, uint8_t *);
void            upgt_eeprom_parse_freq3(struct upgt_softc *, uint8_t *, int);
void            upgt_eeprom_parse_freq4(struct upgt_softc *, uint8_t *, int);
void            upgt_eeprom_parse_freq6(struct upgt_softc *, uint8_t *, int);

int             upgt_ioctl(struct ifnet *, u_long, caddr_t);
int             upgt_init(struct ifnet *);
void            upgt_stop(struct upgt_softc *);
int             upgt_media_change(struct ifnet *);
void            upgt_newassoc(struct ieee80211com *, struct ieee80211_node *,
                    int);
int             upgt_newstate(struct ieee80211com *, enum ieee80211_state, int);
void            upgt_newstate_task(void *);
void            upgt_next_scan(void *);
void            upgt_start(struct ifnet *);
void            upgt_watchdog(struct ifnet *);
void            upgt_tx_task(void *);
void            upgt_tx_done(struct upgt_softc *, uint8_t *);
void            upgt_rx_cb(struct usbd_xfer *, void *, usbd_status);
void            upgt_rx(struct upgt_softc *, uint8_t *, int);
void            upgt_setup_rates(struct upgt_softc *);
uint8_t         upgt_rx_rate(struct upgt_softc *, const int);
int             upgt_set_macfilter(struct upgt_softc *, uint8_t state);
int             upgt_set_channel(struct upgt_softc *, unsigned);
void            upgt_set_led(struct upgt_softc *, int);
void            upgt_set_led_blink(void *);
int             upgt_get_stats(struct upgt_softc *);

int             upgt_alloc_tx(struct upgt_softc *);
int             upgt_alloc_rx(struct upgt_softc *);
int             upgt_alloc_cmd(struct upgt_softc *);
void            upgt_free_tx(struct upgt_softc *);
void            upgt_free_rx(struct upgt_softc *);
void            upgt_free_cmd(struct upgt_softc *);
int             upgt_bulk_xmit(struct upgt_softc *, struct upgt_data *,
                    struct usbd_pipe *, uint32_t *, int);

void            upgt_hexdump(void *, int);
uint32_t        upgt_crc32_le(const void *, size_t);
uint32_t        upgt_chksum_le(const uint32_t *, size_t);

struct cfdriver upgt_cd = {
        NULL, "upgt", DV_IFNET
};

const struct cfattach upgt_ca = {
        sizeof(struct upgt_softc), upgt_match, upgt_attach, upgt_detach
};

static const struct usb_devno upgt_devs_1[] = {
        /* version 1 devices */
        { USB_VENDOR_ALCATELT,          USB_PRODUCT_ALCATELT_ST120G }
};

static const struct usb_devno upgt_devs_2[] = {
        /* version 2 devices */
        { USB_VENDOR_ACCTON,            USB_PRODUCT_ACCTON_PRISM_GT },
        { USB_VENDOR_ALCATELT,          USB_PRODUCT_ALCATELT_ST121G },
        { USB_VENDOR_BELKIN,            USB_PRODUCT_BELKIN_F5D7050 },
        { USB_VENDOR_CISCOLINKSYS,      USB_PRODUCT_CISCOLINKSYS_WUSB54AG },
        { USB_VENDOR_CISCOLINKSYS,      USB_PRODUCT_CISCOLINKSYS_WUSB54GV2 },
        { USB_VENDOR_CONCEPTRONIC,      USB_PRODUCT_CONCEPTRONIC_PRISM_GT },
        { USB_VENDOR_DELL,              USB_PRODUCT_DELL_PRISM_GT_1 },
        { USB_VENDOR_DELL,              USB_PRODUCT_DELL_PRISM_GT_2 },
        { USB_VENDOR_DLINK,             USB_PRODUCT_DLINK_DWLG122A2 },
        { USB_VENDOR_FSC,               USB_PRODUCT_FSC_E5400 },
        { USB_VENDOR_GLOBESPAN,         USB_PRODUCT_GLOBESPAN_PRISM_GT_1 },
        { USB_VENDOR_GLOBESPAN,         USB_PRODUCT_GLOBESPAN_PRISM_GT_2 },
        { USB_VENDOR_INTERSIL,          USB_PRODUCT_INTERSIL_PRISM_GT },
        { USB_VENDOR_PHEENET,           USB_PRODUCT_PHEENET_GWU513 },
        { USB_VENDOR_PHILIPS,           USB_PRODUCT_PHILIPS_CPWUA054 },
        { USB_VENDOR_SMC,               USB_PRODUCT_SMC_2862WG },
        { USB_VENDOR_USR,               USB_PRODUCT_USR_USR5422 },
        { USB_VENDOR_WISTRONNEWEB,      USB_PRODUCT_WISTRONNEWEB_UR045G },
        { USB_VENDOR_XYRATEX,           USB_PRODUCT_XYRATEX_PRISM_GT_1 },
        { USB_VENDOR_XYRATEX,           USB_PRODUCT_XYRATEX_PRISM_GT_2 },
        { USB_VENDOR_ZCOM,              USB_PRODUCT_ZCOM_MD40900 },
        { USB_VENDOR_ZCOM,              USB_PRODUCT_ZCOM_XG703A }
};

int
upgt_match(struct device *parent, void *match, void *aux)
{
        struct usb_attach_arg *uaa = aux;

        if (uaa->iface == NULL || uaa->configno != UPGT_CONFIG_NO)
                return (UMATCH_NONE);

        if (usb_lookup(upgt_devs_1, uaa->vendor, uaa->product) != NULL)
                return (UMATCH_VENDOR_PRODUCT);

        if (usb_lookup(upgt_devs_2, uaa->vendor, uaa->product) != NULL)
                return (UMATCH_VENDOR_PRODUCT);

        return (UMATCH_NONE);
}

void
upgt_attach(struct device *parent, struct device *self, void *aux)
{
        struct upgt_softc *sc = (struct upgt_softc *)self;
        struct usb_attach_arg *uaa = aux;
        usb_interface_descriptor_t *id;
        usb_endpoint_descriptor_t *ed;
        usbd_status error;
        int i;

        /*
         * Attach USB device.
         */
        sc->sc_udev = uaa->device;

        /* check device type */
        if (upgt_device_type(sc, uaa->vendor, uaa->product) != 0)
                return;

        /* get the first interface handle */
        error = usbd_device2interface_handle(sc->sc_udev, UPGT_IFACE_INDEX,
            &sc->sc_iface);
        if (error != 0) {
                printf("%s: could not get interface handle!\n",
                    sc->sc_dev.dv_xname);
                return;
        }

        /* find endpoints */
        id = usbd_get_interface_descriptor(sc->sc_iface);
        sc->sc_rx_no = sc->sc_tx_no = -1;
        for (i = 0; i < id->bNumEndpoints; i++) {
                ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
                if (ed == NULL) {
                        printf("%s: no endpoint descriptor for iface %d!\n",
                            sc->sc_dev.dv_xname, i);
                        return;
                }

                if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
                    UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK)
                        sc->sc_tx_no = ed->bEndpointAddress;
                if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
                    UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK)
                        sc->sc_rx_no = ed->bEndpointAddress;

                /*
                 * 0x01 TX pipe
                 * 0x81 RX pipe
                 *
                 * Deprecated scheme (not used with fw version >2.5.6.x):
                 * 0x02 TX MGMT pipe
                 * 0x82 TX MGMT pipe
                 */
                if (sc->sc_tx_no != -1 && sc->sc_rx_no != -1)
                        break;
        }
        if (sc->sc_rx_no == -1 || sc->sc_tx_no == -1) {
                printf("%s: missing endpoint!\n", sc->sc_dev.dv_xname);
                return;
        }

        /* setup tasks and timeouts */
        usb_init_task(&sc->sc_task_newstate, upgt_newstate_task, sc,
            USB_TASK_TYPE_GENERIC);
        usb_init_task(&sc->sc_task_tx, upgt_tx_task, sc, USB_TASK_TYPE_GENERIC);
        timeout_set(&sc->scan_to, upgt_next_scan, sc);
        timeout_set(&sc->led_to, upgt_set_led_blink, sc);

        /*
         * Open TX and RX USB bulk pipes.
         */
        error = usbd_open_pipe(sc->sc_iface, sc->sc_tx_no, USBD_EXCLUSIVE_USE,
            &sc->sc_tx_pipeh);
        if (error != 0) {
                printf("%s: could not open TX pipe: %s!\n",
                    sc->sc_dev.dv_xname, usbd_errstr(error));
                goto fail;
        }
        error = usbd_open_pipe(sc->sc_iface, sc->sc_rx_no, USBD_EXCLUSIVE_USE,
            &sc->sc_rx_pipeh);
        if (error != 0) {
                printf("%s: could not open RX pipe: %s!\n",
                    sc->sc_dev.dv_xname, usbd_errstr(error));
                goto fail;
        }

        /*
         * Allocate TX, RX, and CMD xfers.
         */
        if (upgt_alloc_tx(sc) != 0)
                goto fail;
        if (upgt_alloc_rx(sc) != 0)
                goto fail;
        if (upgt_alloc_cmd(sc) != 0)
                goto fail;

        /*
         * We need the firmware loaded to complete the attach.
         */
        config_mountroot(self, upgt_attach_hook);

        return;
fail:
        printf("%s: %s failed!\n", sc->sc_dev.dv_xname, __func__);
}

void
upgt_attach_hook(struct device *self)
{
        struct upgt_softc *sc = (struct upgt_softc *)self;
        struct ieee80211com *ic = &sc->sc_ic;
        struct ifnet *ifp = &ic->ic_if;
        usbd_status error;
        int i;

        /*
         * Load firmware file into memory.
         */
        if (upgt_fw_alloc(sc) != 0)
                goto fail;

        /*
         * Initialize the device.
         */
        if (upgt_device_init(sc) != 0)
                goto fail;

        /*
         * Verify the firmware.
         */
        if (upgt_fw_verify(sc) != 0)
                goto fail;

        /*
         * Calculate device memory space.
         */
        if (sc->sc_memaddr_frame_start == 0 || sc->sc_memaddr_frame_end == 0) {
                printf("%s: could not find memory space addresses on FW!\n",
                    sc->sc_dev.dv_xname);
                goto fail;
        }
        sc->sc_memaddr_frame_end -= UPGT_MEMSIZE_RX + 1;
        sc->sc_memaddr_rx_start = sc->sc_memaddr_frame_end + 1;

        DPRINTF(1, "%s: memory address frame start=0x%08x\n",
            sc->sc_dev.dv_xname, sc->sc_memaddr_frame_start);
        DPRINTF(1, "%s: memory address frame end=0x%08x\n",
            sc->sc_dev.dv_xname, sc->sc_memaddr_frame_end);
        DPRINTF(1, "%s: memory address rx start=0x%08x\n",
            sc->sc_dev.dv_xname, sc->sc_memaddr_rx_start);

        upgt_mem_init(sc);

        /*
         * Load the firmware.
         */
        if (upgt_fw_load(sc) != 0)
                goto fail;

        /*
         * Startup the RX pipe.
         */
        struct upgt_data *data_rx = &sc->rx_data;

        usbd_setup_xfer(data_rx->xfer, sc->sc_rx_pipeh, data_rx, data_rx->buf,
            MCLBYTES, USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, upgt_rx_cb);
        error = usbd_transfer(data_rx->xfer);
        if (error != 0 && error != USBD_IN_PROGRESS) {
                printf("%s: could not queue RX transfer!\n",
                    sc->sc_dev.dv_xname);
                goto fail;
        }
        usbd_delay_ms(sc->sc_udev, 100);

        /*
         * Read the whole EEPROM content and parse it.
         */
        if (upgt_eeprom_read(sc) != 0)
                goto fail;
        if (upgt_eeprom_parse(sc) != 0)
                goto fail;

        /*
         * Setup the 802.11 device.
         */
        ic->ic_phytype = IEEE80211_T_OFDM;
        ic->ic_opmode = IEEE80211_M_STA;
        ic->ic_state = IEEE80211_S_INIT;
        ic->ic_caps =
            IEEE80211_C_MONITOR |
            IEEE80211_C_SHPREAMBLE |
            IEEE80211_C_SHSLOT |
            IEEE80211_C_WEP |
            IEEE80211_C_RSN;

        ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b;
        ic->ic_sup_rates[IEEE80211_MODE_11G] = ieee80211_std_rateset_11g;

        for (i = 1; i <= 14; i++) {
                ic->ic_channels[i].ic_freq =
                    ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ);
                ic->ic_channels[i].ic_flags =
                    IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM |
                    IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ;
        }

        ifp->if_softc = sc;
        ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
        ifp->if_ioctl = upgt_ioctl;
        ifp->if_start = upgt_start;
        ifp->if_watchdog = upgt_watchdog;
        memcpy(ifp->if_xname, sc->sc_dev.dv_xname, IFNAMSIZ);

        if_attach(ifp);
        ieee80211_ifattach(ifp);
        ic->ic_newassoc = upgt_newassoc;

        sc->sc_newstate = ic->ic_newstate;
        ic->ic_newstate = upgt_newstate;
        ieee80211_media_init(ifp, upgt_media_change, ieee80211_media_status);

#if NBPFILTER > 0
        bpfattach(&sc->sc_drvbpf, ifp, DLT_IEEE802_11_RADIO,
            sizeof(struct ieee80211_frame) + IEEE80211_RADIOTAP_HDRLEN);

        sc->sc_rxtap_len = sizeof(sc->sc_rxtapu);
        sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len);
        sc->sc_rxtap.wr_ihdr.it_present = htole32(UPGT_RX_RADIOTAP_PRESENT);

        sc->sc_txtap_len = sizeof(sc->sc_txtapu);
        sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len);
        sc->sc_txtap.wt_ihdr.it_present = htole32(UPGT_TX_RADIOTAP_PRESENT);
#endif

        printf("%s: address %s\n",
            sc->sc_dev.dv_xname, ether_sprintf(ic->ic_myaddr));

        return;
fail:
        printf("%s: %s failed!\n", sc->sc_dev.dv_xname, __func__);
}

int
upgt_detach(struct device *self, int flags)
{
        struct upgt_softc *sc = (struct upgt_softc *)self;
        struct ifnet *ifp = &sc->sc_ic.ic_if;
        int s;

        DPRINTF(1, "%s: %s\n", sc->sc_dev.dv_xname, __func__);

        s = splusb();

        /* abort and close TX / RX pipes */
        if (sc->sc_tx_pipeh != NULL)
                usbd_close_pipe(sc->sc_tx_pipeh);
        if (sc->sc_rx_pipeh != NULL)
                usbd_close_pipe(sc->sc_rx_pipeh);

        /* remove tasks and timeouts */
        usb_rem_task(sc->sc_udev, &sc->sc_task_newstate);
        usb_rem_task(sc->sc_udev, &sc->sc_task_tx);
        if (timeout_initialized(&sc->scan_to))
                timeout_del(&sc->scan_to);
        if (timeout_initialized(&sc->led_to))
                timeout_del(&sc->led_to);

        /* free xfers */
        upgt_free_tx(sc);
        upgt_free_rx(sc);
        upgt_free_cmd(sc);

        /* free firmware */
        upgt_fw_free(sc);

        if (ifp->if_softc != NULL) {
                /* detach interface */
                ieee80211_ifdetach(ifp);
                if_detach(ifp);
        }

        splx(s);

        return (0);
}

int
upgt_device_type(struct upgt_softc *sc, uint16_t vendor, uint16_t product)
{
        if (usb_lookup(upgt_devs_1, vendor, product) != NULL) {
                sc->sc_device_type = 1;
                /* XXX */
                printf("%s: version 1 devices not supported yet!\n",
                    sc->sc_dev.dv_xname);
                return (1);
        } else {
                sc->sc_device_type = 2;
        }

        return (0);
}

int
upgt_device_init(struct upgt_softc *sc)
{
        struct upgt_data *data_cmd = &sc->cmd_data;
        char init_cmd[] = { 0x7e, 0x7e, 0x7e, 0x7e };
        int len;

        len = sizeof(init_cmd);
        bcopy(init_cmd, data_cmd->buf, len);
        if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
                printf("%s: could not send device init string!\n",
                    sc->sc_dev.dv_xname);
                return (EIO);
        }
        usbd_delay_ms(sc->sc_udev, 100);

        DPRINTF(1, "%s: device initialized\n", sc->sc_dev.dv_xname);

        return (0);
}

int
upgt_mem_init(struct upgt_softc *sc)
{
        int i;

        for (i = 0; i < UPGT_MEMORY_MAX_PAGES; i++) {
                sc->sc_memory.page[i].used = 0;

                if (i == 0) {
                        /*
                         * The first memory page is always reserved for
                         * command data.
                         */
                        sc->sc_memory.page[i].addr =
                            sc->sc_memaddr_frame_start + MCLBYTES;
                } else {
                        sc->sc_memory.page[i].addr =
                            sc->sc_memory.page[i - 1].addr + MCLBYTES;
                }

                if (sc->sc_memory.page[i].addr + MCLBYTES >=
                    sc->sc_memaddr_frame_end)
                        break;

                DPRINTF(2, "%s: memory address page %d=0x%08x\n",
                    sc->sc_dev.dv_xname, i, sc->sc_memory.page[i].addr);
        }

        sc->sc_memory.pages = i;

        DPRINTF(2, "%s: memory pages=%d\n",
            sc->sc_dev.dv_xname, sc->sc_memory.pages);

        return (0);
}

uint32_t
upgt_mem_alloc(struct upgt_softc *sc)
{
        int i;

        for (i = 0; i < sc->sc_memory.pages; i++) {
                if (sc->sc_memory.page[i].used == 0) {
                        sc->sc_memory.page[i].used = 1;
                        return (sc->sc_memory.page[i].addr);
                }
        }

        return (0);
}

void
upgt_mem_free(struct upgt_softc *sc, uint32_t addr)
{
        int i;

        for (i = 0; i < sc->sc_memory.pages; i++) {
                if (sc->sc_memory.page[i].addr == addr) {
                        sc->sc_memory.page[i].used = 0;
                        return;
                }
        }

        printf("%s: could not free memory address 0x%08x!\n",
            sc->sc_dev.dv_xname, addr);
}


int
upgt_fw_alloc(struct upgt_softc *sc)
{
        const char *name = "upgt-gw3887";
        int error;

        if (sc->sc_fw == NULL) {
                error = loadfirmware(name, &sc->sc_fw, &sc->sc_fw_size);
                if (error != 0) {
                        printf("%s: error %d, could not read firmware %s!\n",
                            sc->sc_dev.dv_xname, error, name);
                        return (EIO);
                }
        }

        DPRINTF(1, "%s: firmware %s allocated\n", sc->sc_dev.dv_xname, name);

        return (0);
}

void
upgt_fw_free(struct upgt_softc *sc)
{
        if (sc->sc_fw != NULL) {
                free(sc->sc_fw, M_DEVBUF, sc->sc_fw_size);
                sc->sc_fw = NULL;
                DPRINTF(1, "%s: firmware freed\n", sc->sc_dev.dv_xname);
        }
}

int
upgt_fw_verify(struct upgt_softc *sc)
{
        struct upgt_fw_bra_option *bra_option;
        uint32_t bra_option_type, bra_option_len;
        uint32_t *uc;
        int offset, bra_end = 0;

        /*
         * Seek to beginning of Boot Record Area (BRA).
         */
        for (offset = 0; offset < sc->sc_fw_size; offset += sizeof(*uc)) {
                uc = (uint32_t *)(sc->sc_fw + offset);
                if (*uc == 0)
                        break;
        }
        for (; offset < sc->sc_fw_size; offset += sizeof(*uc)) {
                uc = (uint32_t *)(sc->sc_fw + offset);
                if (*uc != 0)
                        break;
        }
        if (offset == sc->sc_fw_size) { 
                printf("%s: firmware Boot Record Area not found!\n",
                    sc->sc_dev.dv_xname);
                return (EIO);
        }
        DPRINTF(1, "%s: firmware Boot Record Area found at offset %d\n",
            sc->sc_dev.dv_xname, offset);

        /*
         * Parse Boot Record Area (BRA) options.
         */
        while (offset < sc->sc_fw_size && bra_end == 0) {
                /* get current BRA option */
                bra_option = (struct upgt_fw_bra_option *)(sc->sc_fw + offset);
                bra_option_type = letoh32(bra_option->type);
                bra_option_len = letoh32(bra_option->len) * sizeof(*uc);

                switch (bra_option_type) {
                case UPGT_BRA_TYPE_FW:
                        DPRINTF(1, "%s: UPGT_BRA_TYPE_FW len=%d\n",
                            sc->sc_dev.dv_xname, bra_option_len);

                        if (bra_option_len != UPGT_BRA_FWTYPE_SIZE) {
                                printf("%s: wrong UPGT_BRA_TYPE_FW len!\n",
                                    sc->sc_dev.dv_xname);
                                return (EIO);
                        }
                        if (memcmp(UPGT_BRA_FWTYPE_LM86, bra_option->data,
                            bra_option_len) == 0) {
                                sc->sc_fw_type = UPGT_FWTYPE_LM86;
                                break;
                        }
                        if (memcmp(UPGT_BRA_FWTYPE_LM87, bra_option->data,
                            bra_option_len) == 0) {
                                sc->sc_fw_type = UPGT_FWTYPE_LM87;
                                break;
                        }
                        if (memcmp(UPGT_BRA_FWTYPE_FMAC, bra_option->data,
                            bra_option_len) == 0) {
                                sc->sc_fw_type = UPGT_FWTYPE_FMAC;
                                break;
                        }
                        printf("%s: unsupported firmware type!\n",
                            sc->sc_dev.dv_xname);
                        return (EIO);
                case UPGT_BRA_TYPE_VERSION:
                        DPRINTF(1, "%s: UPGT_BRA_TYPE_VERSION len=%d\n",
                            sc->sc_dev.dv_xname, bra_option_len);
                        break;
                case UPGT_BRA_TYPE_DEPIF:
                        DPRINTF(1, "%s: UPGT_BRA_TYPE_DEPIF len=%d\n",
                            sc->sc_dev.dv_xname, bra_option_len);
                        break;
                case UPGT_BRA_TYPE_EXPIF:
                        DPRINTF(1, "%s: UPGT_BRA_TYPE_EXPIF len=%d\n",
                            sc->sc_dev.dv_xname, bra_option_len);
                        break;
                case UPGT_BRA_TYPE_DESCR:
                        DPRINTF(1, "%s: UPGT_BRA_TYPE_DESCR len=%d\n",
                            sc->sc_dev.dv_xname, bra_option_len);

                        struct upgt_fw_bra_descr *descr =
                                (struct upgt_fw_bra_descr *)bra_option->data;

                        sc->sc_memaddr_frame_start =
                            letoh32(descr->memaddr_space_start);
                        sc->sc_memaddr_frame_end =
                            letoh32(descr->memaddr_space_end);

                        DPRINTF(2, "%s: memory address space start=0x%08x\n",
                            sc->sc_dev.dv_xname, sc->sc_memaddr_frame_start);
                        DPRINTF(2, "%s: memory address space end=0x%08x\n",
                            sc->sc_dev.dv_xname, sc->sc_memaddr_frame_end);
                        break;
                case UPGT_BRA_TYPE_END:
                        DPRINTF(1, "%s: UPGT_BRA_TYPE_END len=%d\n",
                            sc->sc_dev.dv_xname, bra_option_len);
                        bra_end = 1;
                        break;
                default:
                        DPRINTF(1, "%s: unknown BRA option len=%d\n",
                            sc->sc_dev.dv_xname, bra_option_len);
                        return (EIO);
                }

                /* jump to next BRA option */
                offset += sizeof(struct upgt_fw_bra_option) + bra_option_len;
        }

        DPRINTF(1, "%s: firmware verified\n", sc->sc_dev.dv_xname);

        return (0);
}

int
upgt_fw_load(struct upgt_softc *sc)
{
        struct upgt_data *data_cmd = &sc->cmd_data;
        struct upgt_data *data_rx = &sc->rx_data;
        char start_fwload_cmd[] = { 0x3c, 0x0d };
        int offset, bsize, n, i, len;
        uint32_t crc32;

        /* send firmware start load command */
        len = sizeof(start_fwload_cmd);
        bcopy(start_fwload_cmd, data_cmd->buf, len);
        if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
                printf("%s: could not send start_firmware_load command!\n",
                    sc->sc_dev.dv_xname);
                return (EIO);
        }

        /* send X2 header */
        len = sizeof(struct upgt_fw_x2_header);
        struct upgt_fw_x2_header *x2 = data_cmd->buf;
        bcopy(UPGT_X2_SIGNATURE, x2->signature, UPGT_X2_SIGNATURE_SIZE);
        x2->startaddr = htole32(UPGT_MEMADDR_FIRMWARE_START);
        x2->len = htole32(sc->sc_fw_size);
        x2->crc = upgt_crc32_le(data_cmd->buf + UPGT_X2_SIGNATURE_SIZE,
            sizeof(struct upgt_fw_x2_header) - UPGT_X2_SIGNATURE_SIZE -
            sizeof(uint32_t));
        if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
                printf("%s: could not send firmware X2 header!\n",
                    sc->sc_dev.dv_xname);
                return (EIO);
        }

        /* download firmware */
        for (offset = 0; offset < sc->sc_fw_size; offset += bsize) {
                if (sc->sc_fw_size - offset > UPGT_FW_BLOCK_SIZE)
                        bsize = UPGT_FW_BLOCK_SIZE;
                else
                        bsize = sc->sc_fw_size - offset;

                n = upgt_fw_copy(sc->sc_fw + offset, data_cmd->buf, bsize);

                DPRINTF(1, "%s: FW offset=%d, read=%d, sent=%d\n",
                    sc->sc_dev.dv_xname, offset, n, bsize);

                if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &bsize, 0)
                    != 0) {
                        printf("%s: error while downloading firmware block!\n",
                            sc->sc_dev.dv_xname);
                        return (EIO);
                }

                bsize = n;
        }
        DPRINTF(1, "%s: firmware downloaded\n", sc->sc_dev.dv_xname);

        /* load firmware */
        crc32 = upgt_crc32_le(sc->sc_fw, sc->sc_fw_size);
        *((uint32_t *)(data_cmd->buf)    ) = crc32;
        *((uint8_t  *)(data_cmd->buf) + 4) = 'g';
        *((uint8_t  *)(data_cmd->buf) + 5) = '\r';
        len = 6;
        if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
                printf("%s: could not send load_firmware command!\n",
                    sc->sc_dev.dv_xname);
                return (EIO);
        }

        for (i = 0; i < UPGT_FIRMWARE_TIMEOUT; i++) {
                len = UPGT_FW_BLOCK_SIZE;
                bzero(data_rx->buf, MCLBYTES);
                if (upgt_bulk_xmit(sc, data_rx, sc->sc_rx_pipeh, &len,
                    USBD_SHORT_XFER_OK) != 0) {
                        printf("%s: could not read firmware response!\n",
                            sc->sc_dev.dv_xname);
                        return (EIO);
                }

                if (memcmp(data_rx->buf, "OK", 2) == 0)
                        break;  /* firmware load was successful */
        }
        if (i == UPGT_FIRMWARE_TIMEOUT) {
                printf("%s: firmware load failed!\n", sc->sc_dev.dv_xname);
                return (EIO);
        }
        DPRINTF(1, "%s: firmware loaded\n", sc->sc_dev.dv_xname);

        return (0);
}

/*
 * While copying the version 2 firmware, we need to replace two characters:
 *
 * 0x7e -> 0x7d 0x5e
 * 0x7d -> 0x7d 0x5d
 */
int
upgt_fw_copy(char *src, char *dst, int size)
{
        int i, j;

        for (i = 0, j = 0; i < size && j < size; i++) {
                switch (src[i]) {
                case 0x7e:
                        dst[j] = 0x7d;
                        j++;
                        dst[j] = 0x5e;
                        j++;
                        break;
                case 0x7d:
                        dst[j] = 0x7d;
                        j++;
                        dst[j] = 0x5d;
                        j++;
                        break;
                default:
                        dst[j] = src[i];
                        j++;
                        break;
                }
        }

        return (i);
}

int
upgt_eeprom_read(struct upgt_softc *sc)
{
        struct upgt_data *data_cmd = &sc->cmd_data;
        struct upgt_lmac_mem *mem;
        struct upgt_lmac_eeprom *eeprom;
        int offset, block, len;

        offset = 0;
        block = UPGT_EEPROM_BLOCK_SIZE;
        while (offset < UPGT_EEPROM_SIZE) {
                DPRINTF(1, "%s: request EEPROM block (offset=%d, len=%d)\n",
                    sc->sc_dev.dv_xname, offset, block);

                /*
                 * Transmit the URB containing the CMD data.
                 */
                bzero(data_cmd->buf, MCLBYTES);

                mem = (struct upgt_lmac_mem *)data_cmd->buf;
                mem->addr = htole32(sc->sc_memaddr_frame_start +
                    UPGT_MEMSIZE_FRAME_HEAD);

                eeprom = (struct upgt_lmac_eeprom *)(mem + 1);
                eeprom->header1.flags = 0;
                eeprom->header1.type = UPGT_H1_TYPE_CTRL;
                eeprom->header1.len = htole16((
                    sizeof(struct upgt_lmac_eeprom) -
                    sizeof(struct upgt_lmac_header)) + block);

                eeprom->header2.reqid = htole32(sc->sc_memaddr_frame_start);
                eeprom->header2.type = htole16(UPGT_H2_TYPE_EEPROM);
                eeprom->header2.flags = 0;

                eeprom->offset = htole16(offset);
                eeprom->len = htole16(block);

                len = sizeof(*mem) + sizeof(*eeprom) + block;

                mem->chksum = upgt_chksum_le((uint32_t *)eeprom,
                    len - sizeof(*mem));

                if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len,
                    USBD_FORCE_SHORT_XFER) != 0) {
                        printf("%s: could not transmit EEPROM data URB!\n",
                            sc->sc_dev.dv_xname);
                        return (EIO);
                }
                if (tsleep_nsec(sc, 0, "eeprom_request",
                    MSEC_TO_NSEC(UPGT_USB_TIMEOUT))) {
                        printf("%s: timeout while waiting for EEPROM data!\n",
                            sc->sc_dev.dv_xname);
                        return (EIO);
                }

                offset += block;
                if (UPGT_EEPROM_SIZE - offset < block)
                        block = UPGT_EEPROM_SIZE - offset;
        }

        return (0);
}

int
upgt_eeprom_parse(struct upgt_softc *sc)
{
        struct ieee80211com *ic = &sc->sc_ic;
        struct upgt_eeprom_header *eeprom_header;
        struct upgt_eeprom_option *eeprom_option;
        uint16_t option_len;
        uint16_t option_type;
        uint16_t preamble_len;
        int option_end = 0;

        /* calculate eeprom options start offset */
        eeprom_header = (struct upgt_eeprom_header *)sc->sc_eeprom;
        preamble_len = letoh16(eeprom_header->preamble_len);
        eeprom_option = (struct upgt_eeprom_option *)(sc->sc_eeprom +
            (sizeof(struct upgt_eeprom_header) + preamble_len));

        while (!option_end) {
                /* the eeprom option length is stored in words */
                option_len =
                    (letoh16(eeprom_option->len) - 1) * sizeof(uint16_t);
                option_type =
                    letoh16(eeprom_option->type);

                switch (option_type) {
                case UPGT_EEPROM_TYPE_NAME:
                        DPRINTF(1, "%s: EEPROM name len=%d\n",
                            sc->sc_dev.dv_xname, option_len);
                        break;
                case UPGT_EEPROM_TYPE_SERIAL:
                        DPRINTF(1, "%s: EEPROM serial len=%d\n",
                            sc->sc_dev.dv_xname, option_len);
                        break;
                case UPGT_EEPROM_TYPE_MAC:
                        DPRINTF(1, "%s: EEPROM mac len=%d\n",
                            sc->sc_dev.dv_xname, option_len);

                        IEEE80211_ADDR_COPY(ic->ic_myaddr, eeprom_option->data);
                        break;
                case UPGT_EEPROM_TYPE_HWRX:
                        DPRINTF(1, "%s: EEPROM hwrx len=%d\n",
                            sc->sc_dev.dv_xname, option_len);

                        upgt_eeprom_parse_hwrx(sc, eeprom_option->data);
                        break;
                case UPGT_EEPROM_TYPE_CHIP:
                        DPRINTF(1, "%s: EEPROM chip len=%d\n",
                            sc->sc_dev.dv_xname, option_len);
                        break;
                case UPGT_EEPROM_TYPE_FREQ3:
                        DPRINTF(1, "%s: EEPROM freq3 len=%d\n",
                            sc->sc_dev.dv_xname, option_len);

                        upgt_eeprom_parse_freq3(sc, eeprom_option->data,
                            option_len);
                        break;
                case UPGT_EEPROM_TYPE_FREQ4:
                        DPRINTF(1, "%s: EEPROM freq4 len=%d\n",
                            sc->sc_dev.dv_xname, option_len);

                        upgt_eeprom_parse_freq4(sc, eeprom_option->data,
                            option_len);
                        break;
                case UPGT_EEPROM_TYPE_FREQ5:
                        DPRINTF(1, "%s: EEPROM freq5 len=%d\n",
                            sc->sc_dev.dv_xname, option_len);
                        break;
                case UPGT_EEPROM_TYPE_FREQ6:
                        DPRINTF(1, "%s: EEPROM freq6 len=%d\n",
                            sc->sc_dev.dv_xname, option_len);

                        upgt_eeprom_parse_freq6(sc, eeprom_option->data,
                            option_len);
                        break;
                case UPGT_EEPROM_TYPE_END:
                        DPRINTF(1, "%s: EEPROM end len=%d\n",
                            sc->sc_dev.dv_xname, option_len);
                        option_end = 1;
                        break;
                case UPGT_EEPROM_TYPE_OFF:
                        DPRINTF(1, "%s: EEPROM off without end option!\n",
                            sc->sc_dev.dv_xname);
                        return (EIO);
                default:
                        DPRINTF(1, "%s: EEPROM unknown type 0x%04x len=%d\n",
                            sc->sc_dev.dv_xname, option_type, option_len);
                        break;
                }

                /* jump to next EEPROM option */
                eeprom_option = (struct upgt_eeprom_option *)
                    (eeprom_option->data + option_len);
        }

        return (0);
}

void
upgt_eeprom_parse_hwrx(struct upgt_softc *sc, uint8_t *data)
{
        struct upgt_eeprom_option_hwrx *option_hwrx;

        option_hwrx = (struct upgt_eeprom_option_hwrx *)data;

        sc->sc_eeprom_hwrx = option_hwrx->rxfilter - UPGT_EEPROM_RX_CONST;

        DPRINTF(2, "%s: hwrx option value=0x%04x\n",
            sc->sc_dev.dv_xname, sc->sc_eeprom_hwrx);
}

void
upgt_eeprom_parse_freq3(struct upgt_softc *sc, uint8_t *data, int len)
{
        struct upgt_eeprom_freq3_header *freq3_header;
        struct upgt_lmac_freq3 *freq3;
        int i, elements, flags;
        unsigned channel;

        freq3_header = (struct upgt_eeprom_freq3_header *)data;
        freq3 = (struct upgt_lmac_freq3 *)(freq3_header + 1);

        flags = freq3_header->flags;
        elements = freq3_header->elements;

        DPRINTF(2, "%s: flags=0x%02x\n", sc->sc_dev.dv_xname, flags);
        DPRINTF(2, "%s: elements=%d\n", sc->sc_dev.dv_xname, elements);

        for (i = 0; i < elements; i++) {
                channel = ieee80211_mhz2ieee(letoh16(freq3[i].freq), 0);

                sc->sc_eeprom_freq3[channel] = freq3[i];

                DPRINTF(2, "%s: frequency=%d, channel=%d\n",
                    sc->sc_dev.dv_xname,
                    letoh16(sc->sc_eeprom_freq3[channel].freq), channel);
        }
}

void
upgt_eeprom_parse_freq4(struct upgt_softc *sc, uint8_t *data, int len)
{
        struct upgt_eeprom_freq4_header *freq4_header;
        struct upgt_eeprom_freq4_1 *freq4_1;
        struct upgt_eeprom_freq4_2 *freq4_2;
        int i, j, elements, settings, flags;
        unsigned channel;

        freq4_header = (struct upgt_eeprom_freq4_header *)data;
        freq4_1 = (struct upgt_eeprom_freq4_1 *)(freq4_header + 1);

        flags = freq4_header->flags;
        elements = freq4_header->elements;
        settings = freq4_header->settings;

        /* we need this value later */
        sc->sc_eeprom_freq6_settings = freq4_header->settings;

        DPRINTF(2, "%s: flags=0x%02x\n", sc->sc_dev.dv_xname, flags);
        DPRINTF(2, "%s: elements=%d\n", sc->sc_dev.dv_xname, elements);
        DPRINTF(2, "%s: settings=%d\n", sc->sc_dev.dv_xname, settings);

        for (i = 0; i < elements; i++) {
                channel = ieee80211_mhz2ieee(letoh16(freq4_1[i].freq), 0);

                freq4_2 = (struct upgt_eeprom_freq4_2 *)freq4_1[i].data;

                for (j = 0; j < settings; j++) {
                        sc->sc_eeprom_freq4[channel][j].cmd = freq4_2[j];
                        sc->sc_eeprom_freq4[channel][j].pad = 0;
                }

                DPRINTF(2, "%s: frequency=%d, channel=%d\n",
                    sc->sc_dev.dv_xname,
                    letoh16(freq4_1[i].freq), channel);
        }
}

void
upgt_eeprom_parse_freq6(struct upgt_softc *sc, uint8_t *data, int len)
{
        struct upgt_lmac_freq6 *freq6;
        int i, elements;
        unsigned channel;

        freq6 = (struct upgt_lmac_freq6 *)data;

        elements = len / sizeof(struct upgt_lmac_freq6);

        DPRINTF(2, "%s: elements=%d\n", sc->sc_dev.dv_xname, elements);

        for (i = 0; i < elements; i++) {
                channel = ieee80211_mhz2ieee(letoh16(freq6[i].freq), 0);

                sc->sc_eeprom_freq6[channel] = freq6[i];

                DPRINTF(2, "%s: frequency=%d, channel=%d\n",
                    sc->sc_dev.dv_xname,
                    letoh16(sc->sc_eeprom_freq6[channel].freq), channel);
        }
}

int
upgt_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
        struct upgt_softc *sc = ifp->if_softc;
        struct ieee80211com *ic = &sc->sc_ic;
        int s, error = 0;
        uint8_t chan;

        s = splnet();

        switch (cmd) {
        case SIOCSIFADDR:
                ifp->if_flags |= IFF_UP;
                /* FALLTHROUGH */
        case SIOCSIFFLAGS:
                if (ifp->if_flags & IFF_UP) {
                        if ((ifp->if_flags & IFF_RUNNING) == 0)
                                upgt_init(ifp);
                } else {
                        if (ifp->if_flags & IFF_RUNNING)
                                upgt_stop(sc);
                }
                break;
        case SIOCS80211CHANNEL:
                /* allow fast channel switching in monitor mode */
                error = ieee80211_ioctl(ifp, cmd, data);
                if (error == ENETRESET &&
                    ic->ic_opmode == IEEE80211_M_MONITOR) {
                        if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) ==
                            (IFF_UP | IFF_RUNNING)) {
                                ic->ic_bss->ni_chan = ic->ic_ibss_chan;
                                chan = ieee80211_chan2ieee(ic,
                                    ic->ic_bss->ni_chan);
                                upgt_set_channel(sc, chan);
                        }
                        error = 0;
                }
                break;
        default:
                error = ieee80211_ioctl(ifp, cmd, data);
                break;
        }

        if (error == ENETRESET) {
                if (ifp->if_flags & (IFF_UP | IFF_RUNNING))
                        upgt_init(ifp);
                error = 0;
        }

        splx(s);

        return (error);
}

int
upgt_init(struct ifnet *ifp)
{
        struct upgt_softc *sc = ifp->if_softc;
        struct ieee80211com *ic = &sc->sc_ic;

        DPRINTF(1, "%s: %s\n", sc->sc_dev.dv_xname, __func__);

        IEEE80211_ADDR_COPY(ic->ic_myaddr, LLADDR(ifp->if_sadl));

        /* select default channel */
        ic->ic_bss->ni_chan = ic->ic_ibss_chan;
        sc->sc_cur_chan = ieee80211_chan2ieee(ic, ic->ic_bss->ni_chan);

        /* setup device rates */
        upgt_setup_rates(sc);

        ifp->if_flags |= IFF_RUNNING;
        ifq_clr_oactive(&ifp->if_snd);

        upgt_set_macfilter(sc, IEEE80211_S_SCAN);

        if (ic->ic_opmode == IEEE80211_M_MONITOR) {
                upgt_set_channel(sc, sc->sc_cur_chan);
                ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
        } else
                ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);

        return (0);
}

void
upgt_stop(struct upgt_softc *sc)
{
        struct ieee80211com *ic = &sc->sc_ic;
        struct ifnet *ifp = &ic->ic_if;

        DPRINTF(1, "%s: %s\n", sc->sc_dev.dv_xname, __func__);

        /* device down */
        ifp->if_timer = 0;
        ifp->if_flags &= ~IFF_RUNNING;
        ifq_clr_oactive(&ifp->if_snd);

        upgt_set_led(sc, UPGT_LED_OFF);

        /* change device back to initial state */
        ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
}

int
upgt_media_change(struct ifnet *ifp)
{
        struct upgt_softc *sc = ifp->if_softc;
        int error;

        DPRINTF(1, "%s: %s\n", sc->sc_dev.dv_xname, __func__);

        if ((error = ieee80211_media_change(ifp)) != ENETRESET)
                return (error);

        if (ifp->if_flags & (IFF_UP | IFF_RUNNING)) {
                /* give pending USB transfers a chance to finish */
                usbd_delay_ms(sc->sc_udev, 100);
                upgt_init(ifp);
        }

        return (error);
}

void
upgt_newassoc(struct ieee80211com *ic, struct ieee80211_node *ni, int isnew)
{
        ni->ni_txrate = 0;
}

int
upgt_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
{
        struct upgt_softc *sc = ic->ic_if.if_softc;

        usb_rem_task(sc->sc_udev, &sc->sc_task_newstate);
        timeout_del(&sc->scan_to);

        /* do it in a process context */
        sc->sc_state = nstate;
        sc->sc_arg = arg;
        usb_add_task(sc->sc_udev, &sc->sc_task_newstate);

        return (0);
}

void
upgt_newstate_task(void *arg)
{
        struct upgt_softc *sc = arg;
        struct ieee80211com *ic = &sc->sc_ic;
        struct ieee80211_node *ni;
        unsigned channel;

        switch (sc->sc_state) {
        case IEEE80211_S_INIT:
                DPRINTF(1, "%s: newstate is IEEE80211_S_INIT\n",
                    sc->sc_dev.dv_xname);

                /* do not accept any frames if the device is down */
                upgt_set_macfilter(sc, IEEE80211_S_INIT);
                upgt_set_led(sc, UPGT_LED_OFF);
                break;
        case IEEE80211_S_SCAN:
                DPRINTF(1, "%s: newstate is IEEE80211_S_SCAN\n",
                    sc->sc_dev.dv_xname);

                channel = ieee80211_chan2ieee(ic, ic->ic_bss->ni_chan);
                upgt_set_channel(sc, channel);
                timeout_add_msec(&sc->scan_to, 200);
                break;
        case IEEE80211_S_AUTH:
                DPRINTF(1, "%s: newstate is IEEE80211_S_AUTH\n",
                    sc->sc_dev.dv_xname);

                channel = ieee80211_chan2ieee(ic, ic->ic_bss->ni_chan);
                upgt_set_channel(sc, channel);
                break;
        case IEEE80211_S_ASSOC:
                DPRINTF(1, "%s: newstate is IEEE80211_S_ASSOC\n",
                    sc->sc_dev.dv_xname);
                break;
        case IEEE80211_S_RUN:
                DPRINTF(1, "%s: newstate is IEEE80211_S_RUN\n",
                    sc->sc_dev.dv_xname);

                ni = ic->ic_bss;

                /*
                 * TX rate control is done by the firmware.
                 * Report the maximum rate which is available therefore.
                 */
                ni->ni_txrate = ni->ni_rates.rs_nrates - 1;

                if (ic->ic_opmode != IEEE80211_M_MONITOR)
                        upgt_set_macfilter(sc, IEEE80211_S_RUN);
                upgt_set_led(sc, UPGT_LED_ON);
                break;
        }

        sc->sc_newstate(ic, sc->sc_state, sc->sc_arg);
}

void
upgt_next_scan(void *arg)
{
        struct upgt_softc *sc = arg;
        struct ieee80211com *ic = &sc->sc_ic;
        struct ifnet *ifp = &ic->ic_if;

        DPRINTF(2, "%s: %s\n", sc->sc_dev.dv_xname, __func__);

        if (ic->ic_state == IEEE80211_S_SCAN)
                ieee80211_next_scan(ifp);
}

void
upgt_start(struct ifnet *ifp)
{
        struct upgt_softc *sc = ifp->if_softc;
        struct ieee80211com *ic = &sc->sc_ic;
        struct ieee80211_node *ni;
        struct mbuf *m;
        int i;

        /* don't transmit packets if interface is busy or down */
        if (!(ifp->if_flags & IFF_RUNNING) || ifq_is_oactive(&ifp->if_snd))
                return;

        DPRINTF(2, "%s: %s\n", sc->sc_dev.dv_xname, __func__);

        for (i = 0; i < UPGT_TX_COUNT; i++) {
                struct upgt_data *data_tx = &sc->tx_data[i];

                m = mq_dequeue(&ic->ic_mgtq);
                if (m != NULL) {
                        /* management frame */
                        ni = m->m_pkthdr.ph_cookie;
#if NBPFILTER > 0
                        if (ic->ic_rawbpf != NULL)
                                bpf_mtap(ic->ic_rawbpf, m, BPF_DIRECTION_OUT);
#endif
                        if ((data_tx->addr = upgt_mem_alloc(sc)) == 0) {
                                printf("%s: no free prism memory!\n",
                                    sc->sc_dev.dv_xname);
                                return;
                        }
                        data_tx->ni = ni;
                        data_tx->m = m;
                        sc->tx_queued++;
                } else {
                        /* data frame */
                        if (ic->ic_state != IEEE80211_S_RUN)
                                break;

                        m = ifq_dequeue(&ifp->if_snd);
                        if (m == NULL)
                                break;

#if NBPFILTER > 0
                        if (ifp->if_bpf != NULL)
                                bpf_mtap(ifp->if_bpf, m, BPF_DIRECTION_OUT);
#endif
                        m = ieee80211_encap(ifp, m, &ni);
                        if (m == NULL)
                                continue;
#if NBPFILTER > 0
                        if (ic->ic_rawbpf != NULL)
                                bpf_mtap(ic->ic_rawbpf, m, BPF_DIRECTION_OUT);
#endif
                        if ((data_tx->addr = upgt_mem_alloc(sc)) == 0) {
                                printf("%s: no free prism memory!\n",
                                    sc->sc_dev.dv_xname);
                                return;
                        }
                        data_tx->ni = ni;
                        data_tx->m = m;
                        sc->tx_queued++;
                }
        }

        if (sc->tx_queued > 0) {
                DPRINTF(2, "%s: tx_queued=%d\n",
                    sc->sc_dev.dv_xname, sc->tx_queued);
                /* process the TX queue in process context */
                ifp->if_timer = 5;
                ifq_set_oactive(&ifp->if_snd);
                usb_rem_task(sc->sc_udev, &sc->sc_task_tx);
                usb_add_task(sc->sc_udev, &sc->sc_task_tx);
        }
}

void
upgt_watchdog(struct ifnet *ifp)
{
        struct upgt_softc *sc = ifp->if_softc;
        struct ieee80211com *ic = &sc->sc_ic;

        if (ic->ic_state == IEEE80211_S_INIT)
                return;

        printf("%s: watchdog timeout!\n", sc->sc_dev.dv_xname);

        /* TODO: what shall we do on TX timeout? */

        ieee80211_watchdog(ifp);
}

void
upgt_tx_task(void *arg)
{
        struct upgt_softc *sc = arg;
        struct ieee80211com *ic = &sc->sc_ic;
        struct ieee80211_frame *wh;
        struct ieee80211_key *k;
        struct upgt_lmac_mem *mem;
        struct upgt_lmac_tx_desc *txdesc;
        struct mbuf *m;
        uint32_t addr;
        int len, i, s;
        usbd_status error;

        s = splusb();

        upgt_set_led(sc, UPGT_LED_BLINK);

        for (i = 0; i < UPGT_TX_COUNT; i++) {
                struct upgt_data *data_tx = &sc->tx_data[i];

                if (data_tx->m == NULL) {
                        DPRINTF(2, "%s: %d: m is NULL\n",
                            sc->sc_dev.dv_xname, i);
                        continue;
                }

                m = data_tx->m;
                addr = data_tx->addr + UPGT_MEMSIZE_FRAME_HEAD;

                /*
                 * Software crypto.
                 */
                wh = mtod(m, struct ieee80211_frame *);

                if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
                        k = ieee80211_get_txkey(ic, wh, ic->ic_bss);

                        if ((m = ieee80211_encrypt(ic, m, k)) == NULL) {
                                splx(s);
                                return;
                        }

                        /* in case packet header moved, reset pointer */
                        wh = mtod(m, struct ieee80211_frame *);
                }

                /*
                 * Transmit the URB containing the TX data.
                 */
                bzero(data_tx->buf, MCLBYTES);

                mem = (struct upgt_lmac_mem *)data_tx->buf;
                mem->addr = htole32(addr);

                txdesc = (struct upgt_lmac_tx_desc *)(mem + 1);

                /* XXX differ between data and mgmt frames? */
                txdesc->header1.flags = UPGT_H1_FLAGS_TX_DATA;
                txdesc->header1.type = UPGT_H1_TYPE_TX_DATA;
                txdesc->header1.len = htole16(m->m_pkthdr.len);

                txdesc->header2.reqid = htole32(data_tx->addr);
                txdesc->header2.type = htole16(UPGT_H2_TYPE_TX_ACK_YES);
                txdesc->header2.flags = htole16(UPGT_H2_FLAGS_TX_ACK_YES);

                if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) ==
                    IEEE80211_FC0_TYPE_MGT) {
                        /* always send mgmt frames at lowest rate (DS1) */
                        memset(txdesc->rates, 0x10, sizeof(txdesc->rates));
                } else {
                        bcopy(sc->sc_cur_rateset, txdesc->rates,
                            sizeof(txdesc->rates));
                }
                txdesc->type = htole32(UPGT_TX_DESC_TYPE_DATA);
                txdesc->pad3[0] = UPGT_TX_DESC_PAD3_SIZE;

#if NBPFILTER > 0
                if (sc->sc_drvbpf != NULL) {
                        struct mbuf mb;
                        struct upgt_tx_radiotap_header *tap = &sc->sc_txtap;

                        tap->wt_flags = 0;
                        tap->wt_rate = 0;       /* TODO: where to get from? */
                        tap->wt_chan_freq =
                            htole16(ic->ic_bss->ni_chan->ic_freq);
                        tap->wt_chan_flags =
                            htole16(ic->ic_bss->ni_chan->ic_flags);

                        mb.m_data = (caddr_t)tap;
                        mb.m_len = sc->sc_txtap_len;
                        mb.m_next = m;
                        mb.m_nextpkt = NULL;
                        mb.m_type = 0;
                        mb.m_flags = 0;
                        bpf_mtap(sc->sc_drvbpf, &mb, BPF_DIRECTION_OUT);
                }
#endif
                /* copy frame below our TX descriptor header */
                m_copydata(m, 0, m->m_pkthdr.len,
                    data_tx->buf + (sizeof(*mem) + sizeof(*txdesc)));

                /* calculate frame size */
                len = sizeof(*mem) + sizeof(*txdesc) + m->m_pkthdr.len;

                /* we need to align the frame to a 4 byte boundary */
                len = (len + 3) & ~3;

                /* calculate frame checksum */
                mem->chksum = upgt_chksum_le((uint32_t *)txdesc,
                    len - sizeof(*mem));

                /* we do not need the mbuf anymore */
                m_freem(m);
                data_tx->m = NULL;

                DPRINTF(2, "%s: TX start data sending\n", sc->sc_dev.dv_xname);

                usbd_setup_xfer(data_tx->xfer, sc->sc_tx_pipeh, data_tx,
                    data_tx->buf, len, USBD_FORCE_SHORT_XFER | USBD_NO_COPY,
                    UPGT_USB_TIMEOUT, NULL);
                error = usbd_transfer(data_tx->xfer);
                if (error != 0 && error != USBD_IN_PROGRESS) {
                        printf("%s: could not transmit TX data URB!\n",
                            sc->sc_dev.dv_xname);
                        splx(s);
                        return;
                }

                DPRINTF(2, "%s: TX sent (%d bytes)\n",
                    sc->sc_dev.dv_xname, len);
        }

        /*
         * If we don't regularly read the device statistics, the RX queue
         * will stall.  It's strange, but it works, so we keep reading
         * the statistics here.  *shrug*
         */
        upgt_get_stats(sc);

        splx(s);
}

void
upgt_tx_done(struct upgt_softc *sc, uint8_t *data)
{
        struct ieee80211com *ic = &sc->sc_ic;
        struct ifnet *ifp = &ic->ic_if;
        struct upgt_lmac_tx_done_desc *desc;
        int i, s;

        s = splnet();

        desc = (struct upgt_lmac_tx_done_desc *)data;

        for (i = 0; i < UPGT_TX_COUNT; i++) {
                struct upgt_data *data_tx = &sc->tx_data[i];

                if (data_tx->addr == letoh32(desc->header2.reqid)) {
                        upgt_mem_free(sc, data_tx->addr);
                        ieee80211_release_node(ic, data_tx->ni);
                        data_tx->ni = NULL;
                        data_tx->addr = 0;

                        sc->tx_queued--;

                        DPRINTF(2, "%s: TX done: ", sc->sc_dev.dv_xname);
                        DPRINTF(2, "memaddr=0x%08x, status=0x%04x, rssi=%d, ",
                            letoh32(desc->header2.reqid),
                            letoh16(desc->status),
                            letoh16(desc->rssi));
                        DPRINTF(2, "seq=%d\n", letoh16(desc->seq));
                        break;
                }
        }

        if (sc->tx_queued == 0) {
                /* TX queued was processed, continue */
                ifp->if_timer = 0;
                ifq_clr_oactive(&ifp->if_snd);
                upgt_start(ifp);
        }

        splx(s);
}

void
upgt_rx_cb(struct usbd_xfer *xfer, void *priv, usbd_status status)
{
        struct upgt_data *data_rx = priv;
        struct upgt_softc *sc = data_rx->sc;
        int len;
        struct upgt_lmac_header *header;
        struct upgt_lmac_eeprom *eeprom;
        uint8_t h1_type;
        uint16_t h2_type;

        DPRINTF(3, "%s: %s\n", sc->sc_dev.dv_xname, __func__);

        if (status != USBD_NORMAL_COMPLETION) {
                if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
                        return;
                if (status == USBD_STALLED)
                        usbd_clear_endpoint_stall_async(sc->sc_rx_pipeh);
                goto skip;
        }
        usbd_get_xfer_status(xfer, NULL, NULL, &len, NULL);

        /*
         * Check what type of frame came in.
         */
        header = (struct upgt_lmac_header *)(data_rx->buf + 4);

        h1_type = header->header1.type;
        h2_type = letoh16(header->header2.type);

        if (h1_type == UPGT_H1_TYPE_CTRL &&
            h2_type == UPGT_H2_TYPE_EEPROM) {
                eeprom = (struct upgt_lmac_eeprom *)(data_rx->buf + 4);
                uint16_t eeprom_offset = letoh16(eeprom->offset);
                uint16_t eeprom_len = letoh16(eeprom->len);

                DPRINTF(2, "%s: received EEPROM block (offset=%d, len=%d)\n",
                        sc->sc_dev.dv_xname, eeprom_offset, eeprom_len);

                bcopy(data_rx->buf + sizeof(struct upgt_lmac_eeprom) + 4,
                        sc->sc_eeprom + eeprom_offset, eeprom_len);

                /* EEPROM data has arrived in time, wakeup tsleep() */
                wakeup(sc);
        } else
        if (h1_type == UPGT_H1_TYPE_CTRL &&
            h2_type == UPGT_H2_TYPE_TX_DONE) {
                DPRINTF(2, "%s: received 802.11 TX done\n",
                    sc->sc_dev.dv_xname);

                upgt_tx_done(sc, data_rx->buf + 4);
        } else
        if (h1_type == UPGT_H1_TYPE_RX_DATA ||
            h1_type == UPGT_H1_TYPE_RX_DATA_MGMT) {
                DPRINTF(3, "%s: received 802.11 RX data\n",
                    sc->sc_dev.dv_xname);

                upgt_rx(sc, data_rx->buf + 4, letoh16(header->header1.len));
        } else
        if (h1_type == UPGT_H1_TYPE_CTRL &&
            h2_type == UPGT_H2_TYPE_STATS) {
                DPRINTF(2, "%s: received statistic data\n",
                    sc->sc_dev.dv_xname);

                /* TODO: what could we do with the statistic data? */
        } else {
                /* ignore unknown frame types */
                DPRINTF(1, "%s: received unknown frame type 0x%02x\n",
                    sc->sc_dev.dv_xname, header->header1.type);
        }

skip:   /* setup new transfer */
        usbd_setup_xfer(xfer, sc->sc_rx_pipeh, data_rx, data_rx->buf, MCLBYTES,
            USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, upgt_rx_cb);
        (void)usbd_transfer(xfer);
}

void
upgt_rx(struct upgt_softc *sc, uint8_t *data, int pkglen)
{
        struct ieee80211com *ic = &sc->sc_ic;
        struct ifnet *ifp = &ic->ic_if;
        struct upgt_lmac_rx_desc *rxdesc;
        struct ieee80211_frame *wh;
        struct ieee80211_rxinfo rxi;
        struct ieee80211_node *ni;
        struct mbuf *m;
        int s;

        /* access RX packet descriptor */
        rxdesc = (struct upgt_lmac_rx_desc *)data;

        /* create mbuf which is suitable for strict alignment archs */
        m = m_devget(rxdesc->data, pkglen, ETHER_ALIGN);
        if (m == NULL) {
                DPRINTF(1, "%s: could not create RX mbuf!\n", sc->sc_dev.dv_xname);
                ifp->if_ierrors++;
                return;
        }

        s = splnet();

#if NBPFILTER > 0
        if (sc->sc_drvbpf != NULL) {
                struct mbuf mb;
                struct upgt_rx_radiotap_header *tap = &sc->sc_rxtap;

                tap->wr_flags = IEEE80211_RADIOTAP_F_FCS;
                tap->wr_rate = upgt_rx_rate(sc, rxdesc->rate);
                tap->wr_chan_freq = htole16(ic->ic_bss->ni_chan->ic_freq);
                tap->wr_chan_flags = htole16(ic->ic_bss->ni_chan->ic_flags);
                tap->wr_antsignal = rxdesc->rssi;

                mb.m_data = (caddr_t)tap;
                mb.m_len = sc->sc_rxtap_len;
                mb.m_next = m;
                mb.m_nextpkt = NULL;
                mb.m_type = 0;
                mb.m_flags = 0;
                bpf_mtap(sc->sc_drvbpf, &mb, BPF_DIRECTION_IN);
        }
#endif
        /* trim FCS */
        m_adj(m, -IEEE80211_CRC_LEN);

        wh = mtod(m, struct ieee80211_frame *);
        ni = ieee80211_find_rxnode(ic, wh);

        /* push the frame up to the 802.11 stack */
        memset(&rxi, 0, sizeof(rxi));
        rxi.rxi_flags = 0;
        rxi.rxi_rssi = rxdesc->rssi;
        ieee80211_input(ifp, m, ni, &rxi);

        /* node is no longer needed */
        ieee80211_release_node(ic, ni);

        splx(s);

        DPRINTF(3, "%s: RX done\n", sc->sc_dev.dv_xname);
}

void
upgt_setup_rates(struct upgt_softc *sc)
{
        struct ieee80211com *ic = &sc->sc_ic;

        /*
         * 0x01 = OFMD6   0x10 = DS1
         * 0x04 = OFDM9   0x11 = DS2
         * 0x06 = OFDM12  0x12 = DS5
         * 0x07 = OFDM18  0x13 = DS11
         * 0x08 = OFDM24
         * 0x09 = OFDM36
         * 0x0a = OFDM48
         * 0x0b = OFDM54
         */
        const uint8_t rateset_auto_11b[] =
            { 0x13, 0x13, 0x12, 0x11, 0x11, 0x10, 0x10, 0x10 };
        const uint8_t rateset_auto_11g[] =
            { 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06, 0x04, 0x01 };
        const uint8_t rateset_fix_11bg[] =
            { 0x10, 0x11, 0x12, 0x13, 0x01, 0x04, 0x06, 0x07,
              0x08, 0x09, 0x0a, 0x0b };

        if (ic->ic_fixed_rate == -1) {
                /*
                 * Automatic rate control is done by the device.
                 * We just pass the rateset from which the device
                 * will pickup a rate.
                 */
                if (ic->ic_curmode == IEEE80211_MODE_11B)
                        bcopy(rateset_auto_11b, sc->sc_cur_rateset,
                            sizeof(sc->sc_cur_rateset));
                if (ic->ic_curmode == IEEE80211_MODE_11G ||
                    ic->ic_curmode == IEEE80211_MODE_AUTO)
                        bcopy(rateset_auto_11g, sc->sc_cur_rateset,
                            sizeof(sc->sc_cur_rateset));
        } else {
                /* set a fixed rate */
                memset(sc->sc_cur_rateset, rateset_fix_11bg[ic->ic_fixed_rate],
                    sizeof(sc->sc_cur_rateset));
        }
}

uint8_t
upgt_rx_rate(struct upgt_softc *sc, const int rate)
{
        struct ieee80211com *ic = &sc->sc_ic;

        if (ic->ic_curmode == IEEE80211_MODE_11B) {
                if (rate < 0 || rate > 3)
                        /* invalid rate */
                        return (0);

                switch (rate) {
                case 0:
                        return (2);
                case 1:
                        return (4);
                case 2:
                        return (11);
                case 3:
                        return (22);
                default:
                        return (0);
                }
        }

        if (ic->ic_curmode == IEEE80211_MODE_11G) {
                if (rate < 0 || rate > 11)
                        /* invalid rate */
                        return (0);

                switch (rate) {
                case 0:
                        return (2);
                case 1:
                        return (4);
                case 2:
                        return (11);
                case 3:
                        return (22);
                case 4:
                        return (12);
                case 5:
                        return (18);
                case 6:
                        return (24);
                case 7:
                        return (36);
                case 8:
                        return (48);
                case 9:
                        return (72);
                case 10:
                        return (96);
                case 11:
                        return (108);
                default:
                        return (0);
                }
        }

        return (0);
}

int
upgt_set_macfilter(struct upgt_softc *sc, uint8_t state)
{
        struct ieee80211com *ic = &sc->sc_ic;
        struct ieee80211_node *ni = ic->ic_bss;
        struct upgt_data *data_cmd = &sc->cmd_data;
        struct upgt_lmac_mem *mem;
        struct upgt_lmac_filter *filter;
        int len;
        uint8_t broadcast[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };

        /*
         * Transmit the URB containing the CMD data.
         */
        bzero(data_cmd->buf, MCLBYTES);

        mem = (struct upgt_lmac_mem *)data_cmd->buf;
        mem->addr = htole32(sc->sc_memaddr_frame_start +
            UPGT_MEMSIZE_FRAME_HEAD);

        filter = (struct upgt_lmac_filter *)(mem + 1);

        filter->header1.flags = UPGT_H1_FLAGS_TX_NO_CALLBACK;
        filter->header1.type = UPGT_H1_TYPE_CTRL;
        filter->header1.len = htole16(
            sizeof(struct upgt_lmac_filter) -
            sizeof(struct upgt_lmac_header));

        filter->header2.reqid = htole32(sc->sc_memaddr_frame_start);
        filter->header2.type = htole16(UPGT_H2_TYPE_MACFILTER);
        filter->header2.flags = 0;

        switch (state) {
        case IEEE80211_S_INIT:
                DPRINTF(1, "%s: set MAC filter to INIT\n",
                    sc->sc_dev.dv_xname);

                filter->type = htole16(UPGT_FILTER_TYPE_RESET);
                break;
        case IEEE80211_S_SCAN:
                DPRINTF(1, "%s: set MAC filter to SCAN (bssid %s)\n",
                    sc->sc_dev.dv_xname, ether_sprintf(broadcast));

                filter->type = htole16(UPGT_FILTER_TYPE_NONE);
                IEEE80211_ADDR_COPY(filter->dst, ic->ic_myaddr);
                IEEE80211_ADDR_COPY(filter->src, broadcast);
                filter->unknown1 = htole16(UPGT_FILTER_UNKNOWN1);
                filter->rxaddr = htole32(sc->sc_memaddr_rx_start);
                filter->unknown2 = htole16(UPGT_FILTER_UNKNOWN2);
                filter->rxhw = htole32(sc->sc_eeprom_hwrx);
                filter->unknown3 = htole16(UPGT_FILTER_UNKNOWN3);
                break;
        case IEEE80211_S_RUN:
                DPRINTF(1, "%s: set MAC filter to RUN (bssid %s)\n",
                    sc->sc_dev.dv_xname, ether_sprintf(ni->ni_bssid));

                filter->type = htole16(UPGT_FILTER_TYPE_STA);
                IEEE80211_ADDR_COPY(filter->dst, ic->ic_myaddr);
                IEEE80211_ADDR_COPY(filter->src, ni->ni_bssid);
                filter->unknown1 = htole16(UPGT_FILTER_UNKNOWN1);
                filter->rxaddr = htole32(sc->sc_memaddr_rx_start);
                filter->unknown2 = htole16(UPGT_FILTER_UNKNOWN2);
                filter->rxhw = htole32(sc->sc_eeprom_hwrx);
                filter->unknown3 = htole16(UPGT_FILTER_UNKNOWN3);
                break;
        default:
                printf("%s: MAC filter does not know that state!\n",
                    sc->sc_dev.dv_xname);
                break;
        }

        len = sizeof(*mem) + sizeof(*filter);

        mem->chksum = upgt_chksum_le((uint32_t *)filter,
            len - sizeof(*mem));

        if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
                printf("%s: could not transmit macfilter CMD data URB!\n",
                    sc->sc_dev.dv_xname);
                return (EIO);
        }

        return (0);
}

int
upgt_set_channel(struct upgt_softc *sc, unsigned channel)
{
        struct upgt_data *data_cmd = &sc->cmd_data;
        struct upgt_lmac_mem *mem;
        struct upgt_lmac_channel *chan;
        int len;

        DPRINTF(1, "%s: %s: %d\n", sc->sc_dev.dv_xname, __func__, channel);

        /*
         * Transmit the URB containing the CMD data.
         */
        bzero(data_cmd->buf, MCLBYTES);

        mem = (struct upgt_lmac_mem *)data_cmd->buf;
        mem->addr = htole32(sc->sc_memaddr_frame_start +
            UPGT_MEMSIZE_FRAME_HEAD);

        chan = (struct upgt_lmac_channel *)(mem + 1);

        chan->header1.flags = UPGT_H1_FLAGS_TX_NO_CALLBACK;
        chan->header1.type = UPGT_H1_TYPE_CTRL;
        chan->header1.len = htole16(
            sizeof(struct upgt_lmac_channel) -
            sizeof(struct upgt_lmac_header));

        chan->header2.reqid = htole32(sc->sc_memaddr_frame_start);
        chan->header2.type = htole16(UPGT_H2_TYPE_CHANNEL);
        chan->header2.flags = 0;

        chan->unknown1 = htole16(UPGT_CHANNEL_UNKNOWN1);
        chan->unknown2 = htole16(UPGT_CHANNEL_UNKNOWN2);
        chan->freq6 = sc->sc_eeprom_freq6[channel];
        chan->settings = sc->sc_eeprom_freq6_settings;
        chan->unknown3 = UPGT_CHANNEL_UNKNOWN3;

        bcopy(&sc->sc_eeprom_freq3[channel].data, chan->freq3_1,
            sizeof(chan->freq3_1));

        bcopy(&sc->sc_eeprom_freq4[channel], chan->freq4,
            sizeof(sc->sc_eeprom_freq4[channel]));

        bcopy(&sc->sc_eeprom_freq3[channel].data, chan->freq3_2,
            sizeof(chan->freq3_2));

        len = sizeof(*mem) + sizeof(*chan);

        mem->chksum = upgt_chksum_le((uint32_t *)chan,
            len - sizeof(*mem));

        if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
                printf("%s: could not transmit channel CMD data URB!\n",
                    sc->sc_dev.dv_xname);
                return (EIO);
        }

        return (0);
}

void
upgt_set_led(struct upgt_softc *sc, int action)
{
        struct ieee80211com *ic = &sc->sc_ic;
        struct upgt_data *data_cmd = &sc->cmd_data;
        struct upgt_lmac_mem *mem;
        struct upgt_lmac_led *led;
        int len;

        /*
         * Transmit the URB containing the CMD data.
         */
        bzero(data_cmd->buf, MCLBYTES);

        mem = (struct upgt_lmac_mem *)data_cmd->buf;
        mem->addr = htole32(sc->sc_memaddr_frame_start +
            UPGT_MEMSIZE_FRAME_HEAD);

        led = (struct upgt_lmac_led *)(mem + 1);

        led->header1.flags = UPGT_H1_FLAGS_TX_NO_CALLBACK;
        led->header1.type = UPGT_H1_TYPE_CTRL;
        led->header1.len = htole16(
            sizeof(struct upgt_lmac_led) -
            sizeof(struct upgt_lmac_header));

        led->header2.reqid = htole32(sc->sc_memaddr_frame_start);
        led->header2.type = htole16(UPGT_H2_TYPE_LED);
        led->header2.flags = 0;

        switch (action) {
        case UPGT_LED_OFF:
                led->mode = htole16(UPGT_LED_MODE_SET);
                led->action_fix = 0;
                led->action_tmp = htole16(UPGT_LED_ACTION_OFF);
                led->action_tmp_dur = 0;
                break;
        case UPGT_LED_ON:
                led->mode = htole16(UPGT_LED_MODE_SET);
                led->action_fix = 0;
                led->action_tmp = htole16(UPGT_LED_ACTION_ON);
                led->action_tmp_dur = 0;
                break;
        case UPGT_LED_BLINK:
                if (ic->ic_state != IEEE80211_S_RUN)
                        return;
                if (sc->sc_led_blink)
                        /* previous blink was not finished */
                        return;
                led->mode = htole16(UPGT_LED_MODE_SET);
                led->action_fix = htole16(UPGT_LED_ACTION_OFF);
                led->action_tmp = htole16(UPGT_LED_ACTION_ON);
                led->action_tmp_dur = htole16(UPGT_LED_ACTION_TMP_DUR);
                /* lock blink */
                sc->sc_led_blink = 1;
                timeout_add_msec(&sc->led_to, UPGT_LED_ACTION_TMP_DUR);
                break;
        default:
                return;
        }

        len = sizeof(*mem) + sizeof(*led);

        mem->chksum = upgt_chksum_le((uint32_t *)led,
            len - sizeof(*mem));

        if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
                printf("%s: could not transmit led CMD URB!\n",
                    sc->sc_dev.dv_xname);
        }
}

void
upgt_set_led_blink(void *arg)
{
        struct upgt_softc *sc = arg;

        /* blink finished, we are ready for a next one */
        sc->sc_led_blink = 0;
        timeout_del(&sc->led_to);
}

int
upgt_get_stats(struct upgt_softc *sc)
{
        struct upgt_data *data_cmd = &sc->cmd_data;
        struct upgt_lmac_mem *mem;
        struct upgt_lmac_stats *stats;
        int len;

        /*
         * Transmit the URB containing the CMD data.
         */
        bzero(data_cmd->buf, MCLBYTES);

        mem = (struct upgt_lmac_mem *)data_cmd->buf;
        mem->addr = htole32(sc->sc_memaddr_frame_start +
            UPGT_MEMSIZE_FRAME_HEAD);

        stats = (struct upgt_lmac_stats *)(mem + 1);

        stats->header1.flags = 0;
        stats->header1.type = UPGT_H1_TYPE_CTRL;
        stats->header1.len = htole16(
            sizeof(struct upgt_lmac_stats) -
            sizeof(struct upgt_lmac_header));

        stats->header2.reqid = htole32(sc->sc_memaddr_frame_start);
        stats->header2.type = htole16(UPGT_H2_TYPE_STATS);
        stats->header2.flags = 0;

        len = sizeof(*mem) + sizeof(*stats);

        mem->chksum = upgt_chksum_le((uint32_t *)stats,
            len - sizeof(*mem));

        if (upgt_bulk_xmit(sc, data_cmd, sc->sc_tx_pipeh, &len, 0) != 0) {
                printf("%s: could not transmit statistics CMD data URB!\n",
                    sc->sc_dev.dv_xname);
                return (EIO);
        }

        return (0);

}

int
upgt_alloc_tx(struct upgt_softc *sc)
{
        int i;

        sc->tx_queued = 0;

        for (i = 0; i < UPGT_TX_COUNT; i++) {
                struct upgt_data *data_tx = &sc->tx_data[i];

                data_tx->sc = sc;

                data_tx->xfer = usbd_alloc_xfer(sc->sc_udev);
                if (data_tx->xfer == NULL) {
                        printf("%s: could not allocate TX xfer!\n",
                            sc->sc_dev.dv_xname);
                        return (ENOMEM);
                }

                data_tx->buf = usbd_alloc_buffer(data_tx->xfer, MCLBYTES);
                if (data_tx->buf == NULL) {
                        printf("%s: could not allocate TX buffer!\n",
                            sc->sc_dev.dv_xname);
                        return (ENOMEM);
                }

                bzero(data_tx->buf, MCLBYTES);
        }

        return (0);
}

int
upgt_alloc_rx(struct upgt_softc *sc)
{
        struct upgt_data *data_rx = &sc->rx_data;

        data_rx->sc = sc;

        data_rx->xfer = usbd_alloc_xfer(sc->sc_udev);
        if (data_rx->xfer == NULL) {
                printf("%s: could not allocate RX xfer!\n",
                    sc->sc_dev.dv_xname);
                return (ENOMEM);
        }

        data_rx->buf = usbd_alloc_buffer(data_rx->xfer, MCLBYTES);
        if (data_rx->buf == NULL) {
                printf("%s: could not allocate RX buffer!\n",
                    sc->sc_dev.dv_xname);
                return (ENOMEM);
        }

        bzero(data_rx->buf, MCLBYTES);

        return (0);
}

int
upgt_alloc_cmd(struct upgt_softc *sc)
{
        struct upgt_data *data_cmd = &sc->cmd_data;

        data_cmd->sc = sc;

        data_cmd->xfer = usbd_alloc_xfer(sc->sc_udev);
        if (data_cmd->xfer == NULL) {
                printf("%s: could not allocate RX xfer!\n",
                    sc->sc_dev.dv_xname);
                return (ENOMEM);
        }

        data_cmd->buf = usbd_alloc_buffer(data_cmd->xfer, MCLBYTES);
        if (data_cmd->buf == NULL) {
                printf("%s: could not allocate RX buffer!\n",
                    sc->sc_dev.dv_xname);
                return (ENOMEM);
        }

        bzero(data_cmd->buf, MCLBYTES);

        return (0);
}

void
upgt_free_tx(struct upgt_softc *sc)
{
        int i;

        for (i = 0; i < UPGT_TX_COUNT; i++) {
                struct upgt_data *data_tx = &sc->tx_data[i];

                if (data_tx->xfer != NULL) {
                        usbd_free_xfer(data_tx->xfer);
                        data_tx->xfer = NULL;
                }

                data_tx->ni = NULL;
        }
}

void
upgt_free_rx(struct upgt_softc *sc)
{
        struct upgt_data *data_rx = &sc->rx_data;

        if (data_rx->xfer != NULL) {
                usbd_free_xfer(data_rx->xfer);
                data_rx->xfer = NULL;
        }

        data_rx->ni = NULL;
}

void
upgt_free_cmd(struct upgt_softc *sc)
{
        struct upgt_data *data_cmd = &sc->cmd_data;

        if (data_cmd->xfer != NULL) {
                usbd_free_xfer(data_cmd->xfer);
                data_cmd->xfer = NULL;
        }
}

int
upgt_bulk_xmit(struct upgt_softc *sc, struct upgt_data *data,
    struct usbd_pipe *pipeh, uint32_t *size, int flags)
{
        usbd_status status;

        usbd_setup_xfer(data->xfer, pipeh, 0, data->buf, *size,
            USBD_NO_COPY | USBD_SYNCHRONOUS | flags, UPGT_USB_TIMEOUT, NULL);
        status = usbd_transfer(data->xfer);
        if (status != USBD_NORMAL_COMPLETION) {
                printf("%s: %s: error %s!\n",
                    sc->sc_dev.dv_xname, __func__, usbd_errstr(status));
                return (EIO);
        }

        return (0);
}

void
upgt_hexdump(void *buf, int len)
{
        int i;

        for (i = 0; i < len; i++) {
                if (i % 16 == 0)
                        printf("%s%5i:", i ? "\n" : "", i);
                if (i % 4 == 0)
                        printf(" ");
                printf("%02x", (int)*((u_char *)buf + i));
        }
        printf("\n");
}

uint32_t
upgt_crc32_le(const void *buf, size_t size)
{
        uint32_t crc;

        crc = ether_crc32_le(buf, size);

        /* apply final XOR value as common for CRC-32 */
        crc = htole32(crc ^ 0xffffffffU);

        return (crc);
}

/*
 * The firmware awaits a checksum for each frame we send to it.
 * The algorithm used therefor is uncommon but somehow similar to CRC32.
 */
uint32_t
upgt_chksum_le(const uint32_t *buf, size_t size)
{
        int i;
        uint32_t crc = 0;

        for (i = 0; i < size; i += sizeof(uint32_t)) {
                crc = htole32(crc ^ *buf++);
                crc = htole32((crc >> 5) ^ (crc << 3));
        }

        return (crc);
}