/*      $OpenBSD: if_sereg.h,v 1.4 2010/09/05 12:42:54 miod Exp $       */

/*-
 * Copyright (c) 2008, 2009, 2010 Nikolay Denev <ndenev@gmail.com>
 * Copyright (c) 2007, 2008 Alexander Pohoyda <alexander.pohoyda@gmx.net>
 * Copyright (c) 1997, 1998, 1999
 *      Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Bill Paul.
 * 4. Neither the name of the author nor the names of any co-contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS''
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
 * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL AUTHORS OR
 * THE VOICES IN THEIR HEADS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * $FreeBSD: src/sys/dev/sge/if_sgereg.h,v 1.7 2010/07/08 18:22:49 yongari Exp $
 */

#define TX_CTL                  0x00
#define TX_DESC                 0x04
#define Reserved0               0x08
#define TX_NEXT                 0x0c

#define RX_CTL                  0x10
#define RX_DESC                 0x14
#define Reserved1               0x18
#define RX_NEXT                 0x1c

#define IntrStatus              0x20
#define IntrMask                0x24
#define IntrControl             0x28
#define IntrTimer               0x2c

#define PMControl               0x30
#define Reserved2               0x34
#define ROMControl              0x38
#define ROMInterface            0x3c
#define StationControl          0x40
#define GMIIControl             0x44
#define GMacIOCR                0x48
#define GMacIOCTL               0x4c
#define TxMacControl            0x50
#define TxMacTimeLimit          0x54
#define RGMIIDelay              0x58
#define Reserved3               0x5c
#define RxMacControl            0x60    /* 1  WORD */
#define RxMacAddr               0x62    /* 6x BYTE */
#define RxHashTable             0x68    /* 1 LONG */
#define RxHashTable2            0x6c    /* 1 LONG */
#define RxWakeOnLan             0x70
#define RxWakeOnLanData         0x74
#define RxMPSControl            0x78
#define Reserved4               0x7c

/*
 * IntrStatus Register Content
 */
#define INTR_SOFT               0x40000000
#define INTR_TIMER              0x20000000
#define INTR_PAUSE_FRAME        0x00080000
#define INTR_MAGIC_FRAME        0x00040000
#define INTR_WAKE_FRAME         0x00020000
#define INTR_LINK               0x00010000
#define INTR_RX_IDLE            0x00000080
#define INTR_RX_DONE            0x00000040
#define INTR_TXQ1_IDLE          0x00000020
#define INTR_TXQ1_DONE          0x00000010
#define INTR_TX_IDLE            0x00000008
#define INTR_TX_DONE            0x00000004
#define INTR_RX_HALT            0x00000002
#define INTR_TX_HALT            0x00000001

#define SE_INTRS                                                        \
        (INTR_RX_IDLE | INTR_RX_DONE | INTR_TXQ1_IDLE |                 \
         INTR_TXQ1_DONE |INTR_TX_IDLE | INTR_TX_DONE |                  \
         INTR_TX_HALT | INTR_RX_HALT)

/*
 * RxStatusDesc Register Content
 */
#define RxRES                   0x00200000
#define RxCRC                   0x00080000
#define RxRUNT                  0x00100000
#define RxRWT                   0x00400000

/*
 * RX_CTL Register Content
 */
#define RX_CTL_POLL             0x00000010
#define RX_CTL_ENB              0x00000001

/*
 * TX_CTL Register Content
 */
#define TX_CTL_POLL             0x00000010
#define TX_CTL_ENB              0x00000001

/*
 * RxMacControl Register Content
 */
#define AcceptBroadcast         0x0800
#define AcceptMulticast         0x0400
#define AcceptMyPhys            0x0200
#define AcceptAllPhys           0x0100
#define AcceptErr               0x0020
#define AcceptRunt              0x0010
#define RXMAC_STRIP_VLAN        0x0020
#define RXMAC_STRIP_FCS         0x0010
#define RXMAC_PAD_ENB           0x0004
#define RXMAC_CSUM_ENB          0x0002

#define SE_RX_PAD_BYTES 10

/* Station control register. */
#define SC_LOOPBACK             0x80000000
#define SC_RGMII                0x00008000
#define SC_FDX                  0x00001000
#define SC_SPEED_MASK           0x00000c00
#define SC_SPEED_10             0x00000400
#define SC_SPEED_100            0x00000800
#define SC_SPEED_1000           0x00000c00

/*
 * Gigabit Media Independent Interface CTL register
 */
#define GMI_DATA                0xffff0000
#define GMI_DATA_SHIFT          16
#define GMI_REG                 0x0000f800
#define GMI_REG_SHIFT           11
#define GMI_PHY                 0x000007c0
#define GMI_PHY_SHIFT           6
#define GMI_OP_WR               0x00000020
#define GMI_OP_RD               0x00000000
#define GMI_REQ                 0x00000010
#define GMI_MDIO                0x00000008
#define GMI_MDDIR               0x00000004
#define GMI_MDC                 0x00000002
#define GMI_MDEN                0x00000001

/* Tx descriptor command bits. */
#define TDC_OWN                 0x80000000
#define TDC_INTR                0x40000000
#define TDC_THOL3               0x30000000
#define TDC_THOL2               0x20000000
#define TDC_THOL1               0x10000000
#define TDC_THOL0               0x00000000
#define TDC_LS                  0x08000000
#define TDC_IP_CSUM             0x04000000
#define TDC_TCP_CSUM            0x02000000
#define TDC_UDP_CSUM            0x01000000
#define TDC_BST                 0x00800000
#define TDC_EXT                 0x00400000
#define TDC_DEF                 0x00200000
#define TDC_BKF                 0x00100000
#define TDC_CRS                 0x00080000
#define TDC_COL                 0x00040000
#define TDC_CRC                 0x00020000
#define TDC_PAD                 0x00010000
#define TDC_VLAN_MASK           0x0000FFFF

#define SE_TX_INTR_FRAMES       32

/*
 * TX descriptor status bits.
 */
#define TDS_OWC                 0x00080000
#define TDS_ABT                 0x00040000
#define TDS_FIFO                0x00020000
#define TDS_CRS                 0x00010000
#define TDS_COLLS               0x0000ffff
#define SE_TX_ERROR(x)          ((x) & (TDS_OWC | TDS_ABT | TDS_FIFO | TDS_CRS))
#define TX_ERR_BITS             "\20"                           \
                                "\21CRS\22FIFO\23ABT\24OWC"

/* Rx descriptor command bits. */
#define RDC_OWN                 0x80000000
#define RDC_INTR                0x40000000
#define RDC_IP_CSUM             0x20000000
#define RDC_TCP_CSUM            0x10000000
#define RDC_UDP_CSUM            0x08000000
#define RDC_IP_CSUM_OK          0x04000000
#define RDC_TCP_CSUM_OK         0x02000000
#define RDC_UDP_CSUM_OK         0x01000000
#define RDC_WAKEUP              0x00400000
#define RDC_MAGIC               0x00200000
#define RDC_PAUSE               0x00100000
#define RDC_BCAST               0x000c0000
#define RDC_MCAST               0x00080000
#define RDC_UCAST               0x00040000
#define RDC_CRCOFF              0x00020000
#define RDC_PREADD              0x00010000
#define RDC_VLAN_MASK           0x0000FFFF

/*
 * RX descriptor status bits
 */
#define RDS_VLAN                0x80000000
#define RDS_DESCS               0x3f000000
#define RDS_ABORT               0x00800000
#define RDS_SHORT               0x00400000
#define RDS_LIMIT               0x00200000
#define RDS_MIIER               0x00100000
#define RDS_OVRUN               0x00080000
#define RDS_NIBON               0x00040000
#define RDS_COLON               0x00020000
#define RDS_CRCOK               0x00010000
#define SE_RX_ERROR(x)                                                  \
        ((x) & (RDS_COLON | RDS_NIBON | RDS_OVRUN | RDS_MIIER |         \
        RDS_LIMIT | RDS_SHORT | RDS_ABORT))
#define SE_RX_NSEGS(x)          (((x) & RDS_DESCS) >> 24)
#define RX_ERR_BITS             "\20"                                   \
                                "\21CRCOK\22COLON\23NIBON\24OVRUN"      \
                                "\25MIIER\26LIMIT\27SHORT\30ABORT"      \
                                "\40VLAN"

#define RING_END                0x80000000
#define SE_RX_BYTES(x)          ((x) & 0xFFFF)
#define SE_INC(x, y)            (x) = (((x) + 1) % y)

/* Taken from Solaris driver */
#define EI_DATA                 0xffff0000
#define EI_DATA_SHIFT           16
#define EI_OFFSET               0x0000fc00
#define EI_OFFSET_SHIFT         10
#define EI_OP                   0x00000300
#define EI_OP_SHIFT             8
#define EI_OP_RD                (2 << EI_OP_SHIFT)
#define EI_OP_WR                (1 << EI_OP_SHIFT)
#define EI_REQ                  0x00000080
#define EI_DO                   0x00000008
#define EI_DI                   0x00000004
#define EI_CLK                  0x00000002
#define EI_CS                   0x00000001

/*
 * EEPROM Addresses
 */
#define EEPROMSignature         0x00
#define EEPROMCLK               0x01
#define EEPROMInfo              0x02
#define EEPROMMACAddr           0x03

#define SE_TIMEOUT              1000

struct se_desc {
        u_int32_t       se_sts_size;
        u_int32_t       se_cmdsts;
        u_int32_t       se_ptr;
        u_int32_t       se_flags;
};