root/sys/compat/linux/arch/powerpc/linux_machdep.h
/*      $NetBSD: linux_machdep.h,v 1.12 2025/05/19 06:16:24 andvar Exp $ */

/*-
 * Copyright (c) 1995, 2000, 2001 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Frank van der Linden and Emmanuel Dreyfus.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _POWERPC_LINUX_MACHDEP_H
#define _POWERPC_LINUX_MACHDEP_H

#include <compat/linux/common/linux_types.h>
#include <compat/linux/common/linux_signal.h>
#include <compat/linux/common/linux_siginfo.h>

/*
 * From Linux's include/asm-ppc/ptrace.h
 * Needed for sigcontext
 */
struct linux_pt_regs {
#define lpt_regs_fixreg_begin lgpr[0]
        unsigned long lgpr[32];
#define lpt_regs_fixreg_end lgpr[31]
        unsigned long lnip;
        unsigned long lmsr;
        unsigned long lorig_gpr3;       /* Used for restarting system calls */
        unsigned long lctr;
        unsigned long llink;
        unsigned long lxer;
        unsigned long lccr;
        unsigned long lmq;              /* 601 only (not used at present) */
        /* Used on APUS to hold IPL value. */
        unsigned long ltrap;            /* Reason for being here */
        unsigned long ldar;             /* Fault registers */
        unsigned long ldsisr;
        unsigned long lresult;  /* Result of a system call */
};

/*
 * From Linux's include/asm-ppc/sigcontext.h
 * Linux/ppc calls that struct sigcontext_struct
 */
struct linux_sigcontext {
        unsigned long _unused[4];
        int lsignal;
        unsigned long lhandler;
        unsigned long lmask;
        struct linux_pt_regs    *lregs;
};

/*
 * From Linux's include/asm-ppc/elf.h
 */
#define LINUX_ELF_NGREG 48                      /* includes nip, msr, lr, etc. */
#define LINUX_ELF_NFPREG 33             /* includes fpscr */
typedef unsigned long linux_elf_greg_t;
typedef linux_elf_greg_t linux_elf_gregset_t[LINUX_ELF_NGREG];

/*
 * From Linux's include/asm-ppc/ptrace.h
 */
#define LINUX__SIGNAL_FRAMESIZE 64

/*
 * We make the stack look like Linux expects it when calling a signal
 * handler, but use the BSD way of calling the handler and sigreturn().
 * This means that we need to pass the pointer to the handler too.
 * It is appended to the frame to not interfere with the rest of it.
 *
 * The following is from Linux's arch/ppc/kern/signal.c:
 *
 * > When we have signals to deliver, we set up on the
 * > user stack, going down from the original stack pointer:
 * > a sigregs struct
 * > one or more sigcontext structs with
 * > a gap of LINUX__SIGNAL_FRAMESIZE bytes
 * >
 * > Each of these things must be a multiple of 16 bytes in size.
 *
 * linux_sigregs is a linux_sigframe on other Linux ports. Linux/PowerPC
 * defines a rt_sigframe struct, but it is only used for RT signals. for
 * non RT signals, struct sigregs is used instead.
 *
 * About the ltramp field: that trampoline code is not used. Instead, the
 * sigcode (7 bytes long) trampoline code, copied by exec() on program startup
 * is used. However, Linux binaries might expect it to be here.
 */
struct linux_sigregs {
        linux_elf_gregset_t lgp_regs;
        double lfp_regs[LINUX_ELF_NFPREG];
        unsigned long ltramp[2];
        /*
         * Programs using the rs6000/xcoff abi can save up to 19 gp regs
         * and 18 fp regs below sp before decrementing it.
         */
        int labigap[56];
};

/*
 * The following is not from Linux, we define it for convenience. It is the
 * size of the abigap field of linux_sigregs.
 */
#define LINUX_ABIGAP    (56*sizeof(int))

/*
 * linux sigframe in a nutshell (however we don't use it):
 *
 * struct linux_sigframe {
 *              char _gap[LINUX__SIGNAL_FRAMESIZE];
 *              struct sigcontext lsc;
 *              struct linux_sigregs    lsg;
 * };
 */

/*
 * From Linux's include/asm-ppc/ucontext.h
 */
struct linux_ucontext {
        unsigned long luc_flags;
        struct linux_ucontext *luc_link;
        linux_stack_t   luc_stack;
        struct linux_sigcontext luc_context;
        linux_sigset_t  luc_sigmask;  /* mask last for extensibility */
};

/*
 * From Linux's arch/ppc/kernel/signal.c, the real rt_sigframe
 */
struct linux_rt_sigframe
{
        unsigned long  _unused[2];
        struct linux_siginfo *lpinfo;
        void *lpuc;
        struct linux_siginfo linfo;
        struct linux_ucontext luc;
};

/*
 * Major device numbers of VT device on both Linux and NetBSD. Used in
 * ugly patch to fake device numbers.
 *
 * LINUX_CONS_MAJOR is from Linux's include/linux/major.h
 */
#define LINUX_CONS_MAJOR 4

/*
 * Linux ioctl calls for the keyboard.
 *
 * From Linux's include/linux/kd.h
 */
#define LINUX_KDGKBMODE 0x4b44
#define LINUX_KDSKBMODE 0x4b45
#define LINUX_KDMKTONE  0x4b30
#define LINUX_KDSETMODE 0x4b3a
#define LINUX_KDENABIO  0x4b36
#define LINUX_KDDISABIO 0x4b37
#define LINUX_KDGETLED  0x4b31
#define LINUX_KDSETLED  0x4b32
#define LINUX_KDGKBTYPE 0x4B33
#define LINUX_KDGKBENT  0x4B46

/*
 * Mode for KDSKBMODE which we don't have (we just use plain mode for this)
 *
 * From Linux's include/linux/kd.h
 */
#define LINUX_K_MEDIUMRAW 2

/*
 * VT ioctl calls in Linux (the ones that the pcvt emulation in
 * wscons can handle)
 *
 * From Linux's include/linux/vt.h
 */
#define LINUX_VT_OPENQRY        0x5600
#define LINUX_VT_GETMODE        0x5601
#define LINUX_VT_SETMODE        0x5602
#define LINUX_VT_GETSTATE       0x5603
#define LINUX_VT_RELDISP        0x5605
#define LINUX_VT_ACTIVATE       0x5606
#define LINUX_VT_WAITACTIVE     0x5607
#define LINUX_VT_DISALLOCATE    0x5608

/*
 * This range used by VMWare (XXX)
 *
 * From Linux's include/linux/vt.h
 * XXX It's not sure this s needed for powerpc
 */
#define LINUX_VMWARE_NONE 200
#define LINUX_VMWARE_LAST 237

/*
 * Range of ioctls to just pass on, so that modules (like VMWare) can
 * handle them.
 *
 * From Linux's include/linux/vt.h
 */
#define LINUX_IOCTL_MIN_PASS LINUX_VMWARE_NONE
#define LINUX_IOCTL_MAX_PASS (LINUX_VMWARE_LAST+8)

#ifdef _KERNEL
__BEGIN_DECLS /* XXX from NetBSD/i386. Not arch dependent? */
void linux_syscall_intern(struct proc *);
__END_DECLS
#endif /* !_KERNEL */


#endif /* _POWERPC_LINUX_MACHDEP_H */