/*      $NetBSD: if_qt.c,v 1.29 2025/01/08 18:36:08 tsutsui Exp $       */
/*
 * Copyright (c) 1992 Steven M. Schultz
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *      @(#)if_qt.c     1.2 (2.11BSD) 2/20/93
 */
/*
 *
 * Modification History
 * 23-Feb-92 -- sms
 *      Rewrite the buffer handling so that fewer than the maximum number of
 *      buffers may be used (32 receive and 12 transmit buffers consume 66+kb
 *      of main system memory in addition to the internal structures in the
 *      networking code).  A freelist of available buffers is maintained now.
 *      When I/O operations complete the associated buffer is placed on the
 *      freelist (a single linked list for simplicity) and when an I/O is
 *      started a buffer is pulled off the list.
 *
 * 20-Feb-92 -- sms
 *      It works!  Darned board couldn't handle "short" rings - those rings
 *      where only half the entries were made available to the board (the
 *      ring descriptors were the full size, merely half the entries were
 *      flagged as belonging always to the driver).  Grrrr.  Would have thought
 *      the board could skip over those entries reserved by the driver.
 *      Now to find a way not to have to allocated 32+12 times 1.5kb worth of
 *      buffers...
 *
 * 03-Feb-92 -- sms
 *      Released but still not working.  The driver now responds to arp and
 *      ping requests.  The board is apparently not returning ring descriptors
 *      to the driver so eventually we run out of buffers.  Back to the
 *      drawing board.
 *
 * 28-Dec-92 -- sms
 *      Still not released.  Hiatus in finding free time and thin-netting
 *      the systems (many thanks Terry!).
 *      Added logic to dynamically allocate a vector and initialize it.
 *
 * 23-Oct-92 -- sms
 *      The INIT block must (apparently) be quadword aligned [no thanks to
 *      the manual for not mentioning that fact].  The necessary alignment
 *      is achieved by allocating the INIT block from main memory ('malloc'
 *      guarantees click alignment) and mapping it as needed (which is _very_
 *      infrequently).  A check for quadword alignment of the ring descriptors
 *      was added - at present the descriptors are properly aligned, if this
 *      should change then something will have to be done (like do it "right").
 *      Darned alignment restrictions!
 *
 *      A couple of typos were corrected (missing parentheses, reversed
 *      arguments to printf calls, etc).
 *
 * 13-Oct-92 -- sms@wlv.iipo.gtegsc.com
 *      Created based on the DELQA-PLUS addendum to DELQA User's Guide.
 *      This driver ('qt') is selected at system configuration time.  If the
 *      board * is not a DELQA-YM an error message will be printed and the
 *      interface will not be attached.
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_qt.c,v 1.29 2025/01/08 18:36:08 tsutsui Exp $");

#include "opt_inet.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/device.h>
#include <sys/errno.h>
#include <sys/syslog.h>
#include <sys/time.h>
#include <sys/kernel.h>

#include <net/if.h>
#include <net/if_ether.h>
#include <net/route.h>
#include <net/bpf.h>

#ifdef INET
#include <sys/domain.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#endif

#include <sys/bus.h>

#include <dev/qbus/ubavar.h>
#include <dev/qbus/if_uba.h>
#include <dev/qbus/if_qtreg.h>

#define NRCV    QT_MAX_RCV      /* Receive descriptors (must be == 32) */
#define NXMT    QT_MAX_XMT      /* Transmit descriptors (must be == 12) */
#if     NRCV != 32 || NXMT != 12
        hardware requires these sizes.
#endif

/*
 * Control data structures, must be in DMA-friendly memory.
 */
struct  qt_cdata {
        struct  qt_init qc_init;        /* Init block                   */
        struct  qt_rring qc_r[NRCV];    /* Receive descriptor ring      */
        struct  qt_tring qc_t[NXMT];    /* Transmit descriptor ring     */
};

struct  qt_softc {
        device_t sc_dev;                /* Configuration common part */
        struct  ethercom is_ec;         /* common part - must be first  */
        struct uba_softc *sc_uh;
        struct  evcnt sc_intrcnt;       /* Interrupt counting */
#define is_if   is_ec.ec_if             /* network-visible interface    */
        u_int8_t is_addr[ETHER_ADDR_LEN]; /* hardware Ethernet address  */
        bus_space_tag_t sc_iot;
        bus_addr_t      sc_ioh;

        struct  ubinfo  sc_ui;          /* control block address desc   */
        struct  qt_cdata *sc_ib;        /* virt address of ctrl block   */
        struct  qt_cdata *sc_pib;       /* phys address of ctrl block   */

        struct  ifubinfo sc_ifuba;      /* UNIBUS resources */
        struct  ifrw sc_ifr[NRCV];      /* UNIBUS receive buffer maps */
        struct  ifxmt sc_ifw[NXMT];     /* UNIBUS receive buffer maps */

        int     rindex;                 /* Receive Completed Index      */
        int     nxtrcv;                 /* Next Receive Index           */
        int     nrcv;                   /* Number of Receives active    */

        int     xnext;                  /* Next descriptor to transmit  */
        int     xlast;                  /* Last descriptor transmitted  */
        int     nxmit;                  /* # packets in send queue      */

        short   vector;                 /* Interrupt vector assigned    */
};

static  int qtmatch(device_t, cfdata_t, void *);
static  void qtattach(device_t, device_t, void *);
static  void lance_setladrf(struct ethercom *ec, uint16_t *af);
static  void qtintr(void *);
static  int qtinit(struct ifnet *);
static  int qtioctl(struct ifnet *, u_long, void *);
static  int qtturbo(struct qt_softc *);
static  void qtstart(struct ifnet *ifp);
static  void qtstop(struct ifnet *ifp, int disable);
static  void qtsrr(struct qt_softc *, int);
static  void qtrint(struct qt_softc *sc);
static  void qttint(struct qt_softc *sc);

#ifdef notyet
static  void qtreset(struct qt_softc *sc);
#endif

CFATTACH_DECL_NEW(qt, sizeof(struct qt_softc),
    qtmatch, qtattach, NULL, NULL);

/*
 * Maximum packet size needs to include 4 bytes for the CRC
 * on received packets.
 */
#define MAXPACKETSIZE (ETHERMTU + sizeof (struct ether_header) + ETHER_CRC_LEN)
#define MINPACKETSIZE 64

#define QT_WCSR(csr, val) \
        bus_space_write_2(sc->sc_iot, sc->sc_ioh, csr, val)
#define QT_RCSR(csr) \
        bus_space_read_2(sc->sc_iot, sc->sc_ioh, csr)


#define loint(x)        ((int)(x) & 0xffff)
#define hiint(x)        (((int)(x) >> 16) & 0x3f)

/*
 * Check if this card is a turbo delqa.
 */
int
qtmatch(device_t parent, cfdata_t cf, void *aux)
{
        struct qt_softc ssc;
        struct qt_softc *sc = &ssc;
        struct uba_attach_args *ua = aux;
        struct uba_softc *uh = device_private(parent);
        struct qt_init *qi;
        struct ubinfo ui;

        sc->sc_iot = ua->ua_iot;
        sc->sc_ioh = ua->ua_ioh;
        if (qtturbo(sc) == 0)
                return 0; /* Not a turbo card */

        /* Force the card to interrupt */
        ui.ui_size = sizeof(struct qt_init);
        if (ubmemalloc(uh, &ui, 0))
                return 0; /* Failed */
        qi = (struct qt_init *)ui.ui_vaddr;
        memset(qi, 0, sizeof(struct qt_init));
        qi->vector = uh->uh_lastiv - 4;
        qi->options = INIT_OPTIONS_INT;

        QT_WCSR(CSR_IBAL, loint(ui.ui_baddr));
        QT_WCSR(CSR_IBAH, hiint(ui.ui_baddr));
        QT_WCSR(CSR_SRQR, 2);
        delay(100000); /* Wait some time for interrupt */
        QT_WCSR(CSR_SRQR, 3); /* Stop card */

        ubmemfree(uh, &ui);

        return 10;
}


/*
 * Interface exists.  More accurately, something exists at the CSR (see
 * sys/sys_net.c) -- there's no guarantee it's a DELQA-YM.
 *
 * The ring descriptors are initialized, the buffers allocated using first the
 * DMA region allocated at network load time and then later main memory.  The
 * INIT block is filled in and the device is poked/probed to see if it really
 * is a DELQA-YM.  If the device is not a -YM then a message is printed and
 * the 'if_attach' call is skipped.  For a -YM the START command is issued,
 * but the device is not marked as running|up - that happens at interrupt level
 * when the device interrupts to say it has started.
 */

void
qtattach(device_t parent, device_t self, void *aux)
{
        struct qt_softc *sc = device_private(self);
        struct ifnet *ifp = &sc->is_if;
        struct uba_attach_args *ua = aux;

        sc->sc_dev = self;

        uba_intr_establish(ua->ua_icookie, ua->ua_cvec, qtintr, sc,
            &sc->sc_intrcnt);
        evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, ua->ua_evcnt,
            device_xname(sc->sc_dev), "intr");

        sc->sc_uh = device_private(parent);
        sc->sc_iot = ua->ua_iot;
        sc->sc_ioh = ua->ua_ioh;
        sc->sc_uh->uh_lastiv -= 4;
        sc->vector = sc->sc_uh->uh_lastiv;

/*
 * Now allocate the buffers and initialize the buffers.  This should _never_
 * fail because main memory is allocated after the DMA pool is used up.
 */

        sc->is_addr[0] = QT_RCSR(0);
        sc->is_addr[1] = QT_RCSR(2);
        sc->is_addr[2] = QT_RCSR(4);
        sc->is_addr[3] = QT_RCSR(6);
        sc->is_addr[4] = QT_RCSR(8);
        sc->is_addr[5] = QT_RCSR(10);

        strcpy(ifp->if_xname, device_xname(sc->sc_dev));
        ifp->if_softc = sc;
        ifp->if_flags = IFF_BROADCAST|IFF_MULTICAST;
        ifp->if_ioctl = qtioctl;
        ifp->if_start = qtstart;
        ifp->if_init = qtinit;
        ifp->if_stop = qtstop;
        IFQ_SET_READY(&ifp->if_snd);

        printf("\n%s: delqa-plus in Turbo mode, hardware address %s\n",
            device_xname(sc->sc_dev), ether_sprintf(sc->is_addr));
        if_attach(ifp);
        ether_ifattach(ifp, sc->is_addr);
}

int
qtturbo(struct qt_softc *sc)
{
        int i;

/*
 * Issue the software reset.  Delay 150us.  The board should now be in
 * DELQA-Normal mode.  Set ITB and DEQTA select.  If both bits do not
 * stay turned on then the board is not a DELQA-YM.
 */
        QT_WCSR(CSR_ARQR, ARQR_SR);
        QT_WCSR(CSR_ARQR, 0);
        delay(150L);

        QT_WCSR(CSR_SRR, 0x8001);       /* MS | ITB */
        i = QT_RCSR(CSR_SRR);
        QT_WCSR(CSR_SRR, 0x8000);       /* Turn off ITB, set DELQA select */
        if (i != 0x8001)
                return 0;
/*
 * Board is a DELQA-YM.  Send the commands to enable Turbo mode.  Delay
 * 1 second, testing the SRR register every millisecond to see if the
 * board has shifted to Turbo mode.
 */
        QT_WCSR(CSR_XCR0, 0x0baf);
        QT_WCSR(CSR_XCR1, 0xff00);
        for (i = 0; i < 1000; i++) {
                if ((QT_RCSR(CSR_SRR) & SRR_RESP) == 1)
                        break;
                delay(1000L);
        }
        if (i >= 1000) {
                printf("qt !Turbo\n");
                return 0;
        }
        return 1;
}

#define ETHER_CMP(a,b)  memcmp((a), (b), 6)

/*
 * Set up the logical address filter.
 */
void
lance_setladrf(struct ethercom *ec, uint16_t *af)
{
        struct ifnet *ifp = &ec->ec_if;
        struct ether_multi *enm;
        uint32_t crc;
        struct ether_multistep step;

        /*
         * Set up multicast address filter by passing all multicast addresses
         * through a crc generator, and then using the high order 6 bits as an
         * index into the 64 bit logical address filter.  The high order bit
         * selects the word, while the rest of the bits select the bit within
         * the word.
         */

        if (ifp->if_flags & IFF_PROMISC)
                goto allmulti;

        af[0] = af[1] = af[2] = af[3] = 0x0000;

        ETHER_LOCK(ec);
        ETHER_FIRST_MULTI(step, ec, enm);
        while (enm != NULL) {
                if (ETHER_CMP(enm->enm_addrlo, enm->enm_addrhi)) {
                        /*
                         * We must listen to a range of multicast addresses.
                         * For now, just accept all multicasts, rather than
                         * trying to set only those filter bits needed to match
                         * the range.  (At this time, the only use of address
                         * ranges is for IP multicast routing, for which the
                         * range is big enough to require all bits set.)
                         */
                        ETHER_UNLOCK(ec);
                        goto allmulti;
                }

                crc = ether_crc32_le(enm->enm_addrlo, ETHER_ADDR_LEN);

                /* Just want the 6 most significant bits. */
                crc >>= 26;

                /* Set the corresponding bit in the filter. */
                af[crc >> 4] |= 1 << (crc & 0xf);

                ETHER_NEXT_MULTI(step, enm);
        }
        ETHER_UNLOCK(ec);
        ifp->if_flags &= ~IFF_ALLMULTI;
        return;

allmulti:
        ifp->if_flags |= IFF_ALLMULTI;
        af[0] = af[1] = af[2] = af[3] = 0xffff;
}

int
qtinit(struct ifnet *ifp)
{
        struct qt_softc *sc = ifp->if_softc;
        struct qt_init *iniblk;
        struct ifrw *ifrw;
        struct ifxmt *ifxp;
        struct qt_rring *rp;
        struct qt_tring *tp;
        int i, error;

        if (ifp->if_flags & IFF_RUNNING) {
                /* Cancel any pending I/O. */
                qtstop(ifp, 0);
        }

        if (sc->sc_ib == NULL) {
                if (if_ubaminit(&sc->sc_ifuba, sc->sc_uh,
                    MCLBYTES, sc->sc_ifr, NRCV, sc->sc_ifw, NXMT)) {
                        printf("%s: can't initialize\n",
                            device_xname(sc->sc_dev));
                        ifp->if_flags &= ~IFF_UP;
                        return 0;
                }
                sc->sc_ui.ui_size = sizeof(struct qt_cdata);
                if ((error = ubmemalloc(sc->sc_uh, &sc->sc_ui, 0))) {
                        printf(": failed ubmemalloc(), error = %d\n", error);
                        return error;
                }
                sc->sc_ib = (struct qt_cdata *)sc->sc_ui.ui_vaddr;
                sc->sc_pib = (struct qt_cdata *)sc->sc_ui.ui_baddr;

/*
 * Fill in most of the INIT block: vector, options (interrupt enable), ring
 * locations.  The physical address is copied from the ROMs as part of the
 * -YM testing procedure.  The CSR is saved here rather than in qtinit()
 * because the qtturbo() routine needs it.
 *
 * The INIT block must be quadword aligned.  Using malloc() guarantees click
 * (64 byte) alignment.  Since the only time the INIT block is referenced is
 * at 'startup' or 'reset' time there is really no time penalty (and a modest
 * D space savings) involved.
 */
                memset(sc->sc_ib, 0, sizeof(struct qt_cdata));
                iniblk = &sc->sc_ib->qc_init;

                iniblk->vector = sc->vector;
                memcpy(iniblk->paddr, sc->is_addr, 6);

                iniblk->options = INIT_OPTIONS_INT;
                iniblk->rx_lo = loint(&sc->sc_pib->qc_r);
                iniblk->rx_hi = hiint(&sc->sc_pib->qc_r);
                iniblk->tx_lo = loint(&sc->sc_pib->qc_t);
                iniblk->tx_hi = hiint(&sc->sc_pib->qc_t);
        }
        iniblk = &sc->sc_ib->qc_init;
        iniblk->mode = ifp->if_flags & IFF_PROMISC ? INIT_MODE_PRO : 0;
/*
 * The multicast filter works "like LANCE".
 */
        lance_setladrf(&sc->is_ec, iniblk->laddr);

/*
 * Now initialize the receive ring descriptors.  Because this routine can be
 * called with outstanding I/O operations we check the ring descriptors for
 * a non-zero 'rhost0' (or 'thost0') word and place those buffers back on
 * the free list.
 */
        for (i = 0; i < NRCV; i++) {
                rp = &sc->sc_ib->qc_r[i];
                ifrw = &sc->sc_ifr[i];
                rp->rmd1 = MCLBYTES;
                rp->rmd4 = loint(ifrw->ifrw_info);
                rp->rmd5 = hiint(ifrw->ifrw_info);
                rp->rmd3 = 0;                   /* clear RMD3_OWN */
        }
        for (i = 0; i < NXMT; i++) {
                tp = &sc->sc_ib->qc_t[i];
                ifxp = &sc->sc_ifw[i];
                tp->tmd4 = loint(ifxp->ifw_info);
                tp->tmd5 = hiint(ifxp->ifw_info);
                tp->tmd3 = TMD3_OWN;
        }

        sc->xnext = sc->xlast = sc->nxmit = 0;
        sc->rindex = 0;
        sc->nxtrcv = 0;
        sc->nrcv = 0;

/*
 * Now we tell the device the address of the INIT block.  The device
 * _must_ be in the Turbo mode at this time.  The "START" command is
 * then issued to the device.  A 1 second timeout is then started.
 * When the interrupt occurs the IFF_UP|IFF_RUNNING state is entered and
 * full operations will proceed.  If the timeout expires without an interrupt
 * being received an error is printed, the flags cleared and the device left
 * marked down.
 */
        QT_WCSR(CSR_IBAL, loint(&sc->sc_pib->qc_init));
        QT_WCSR(CSR_IBAH, hiint(&sc->sc_pib->qc_init));
        QT_WCSR(CSR_SRQR, 2);

        sc->is_if.if_flags |= IFF_RUNNING;
        return 0;
}

/*
 * Start output on interface.
 */

void
qtstart(struct ifnet *ifp)
{
        int len, nxmit;
        struct qt_softc *sc = ifp->if_softc;
        struct qt_tring *rp;
        struct mbuf *m = NULL;

        for (nxmit = sc->nxmit; nxmit < NXMT; nxmit++) {
                IF_DEQUEUE(&sc->is_if.if_snd, m);
                if (m == NULL)
                        break;

                rp = &sc->sc_ib->qc_t[sc->xnext];
                if ((rp->tmd3 & TMD3_OWN) == 0)
                        panic("qtstart");

                bpf_mtap(ifp, m, BPF_D_OUT);

                len = if_ubaput(&sc->sc_ifuba, &sc->sc_ifw[sc->xnext], m);
                if (len < MINPACKETSIZE)
                        len = MINPACKETSIZE;
                rp->tmd3 = len & TMD3_BCT;      /* set length,clear ownership */
                QT_WCSR(CSR_ARQR, ARQR_TRQ);    /* tell device it has buffer */

                if (++sc->xnext >= NXMT)
                        sc->xnext = 0;
        }
        if (sc->nxmit != nxmit)
                sc->nxmit = nxmit;
        /* XXX - set OACTIVE */
}

/*
 * General interrupt service routine.  Receive, transmit, device start
 * interrupts and timeouts come here.  Check for hard device errors and print a
 * message if any errors are found.  If we are waiting for the device to
 * START then check if the device is now running.
 */

void
qtintr(void *arg)
{
        struct qt_softc *sc = arg;
        struct ifnet *ifp = &sc->is_if;
        short status;

        status = QT_RCSR(CSR_SRR);
        if (status < 0) {
                /* should we reset the device after a bunch of these errs? */
                qtsrr(sc, status);
        }
        if ((ifp->if_flags & IFF_UP) == 0)
                return; /* Unwanted interrupt */
        qtrint(sc);
        qttint(sc);
        qtstart(&sc->is_ec.ec_if);
}

/*
 * Transmit interrupt service.  Only called if there are outstanding transmit
 * requests which could have completed.  The DELQA-YM doesn't provide the
 * status bits telling the kind (receive, transmit) of interrupt.
 */

#define BBLMIS (TMD2_BBL|TMD2_MIS)

void
qttint(struct qt_softc *sc)
{
        struct qt_tring *rp;

        while (sc->nxmit > 0) {
                rp = &sc->sc_ib->qc_t[sc->xlast];
                if ((rp->tmd3 & TMD3_OWN) == 0)
                        break;
                if_statinc(&sc->is_if, if_opackets);
/*
 * Collisions don't count as output errors, but babbling and missing packets
 * do count as output errors.
 */
                if (rp->tmd2 & TMD2_CER)
                        if_statinc(&sc->is_if, if_collisions);
                if ((rp->tmd0 & TMD0_ERR1) ||
                    ((rp->tmd2 & TMD2_ERR2) && (rp->tmd2 & BBLMIS))) {
#ifdef QTDEBUG
                        char buf[100];
                        snprintb(buf, sizeof(buf), TMD2_BITS, rp->tmd2);
                        printf("%s: tmd2 %s\n", device_xname(sc->sc_dev), buf);
#endif
                        if_statinc(&sc->is_if, if_oerrors);
                }
                if_ubaend(&sc->sc_ifuba, &sc->sc_ifw[sc->xlast]);
                if (++sc->xlast >= NXMT)
                        sc->xlast = 0;
                sc->nxmit--;
        }
}

/*
 * Receive interrupt service.  Pull packet off the interface and put into
 * a mbuf chain for processing later.
 */

void
qtrint(struct qt_softc *sc)
{
        struct qt_rring *rp;
        struct ifnet *ifp = &sc->is_ec.ec_if;
        struct mbuf *m;
        int len;

        while (sc->sc_ib->qc_r[(int)sc->rindex].rmd3 & RMD3_OWN) {
                rp = &sc->sc_ib->qc_r[(int)sc->rindex];
                if ((rp->rmd0 & (RMD0_STP|RMD0_ENP)) != (RMD0_STP|RMD0_ENP)) {
                        printf("%s: chained packet\n",
                            device_xname(sc->sc_dev));
                        if_statinc(&sc->is_if, if_ierrors);
                        goto rnext;
                }
                len = (rp->rmd1 & RMD1_MCNT) - ETHER_CRC_LEN;

                if ((rp->rmd0 & RMD0_ERR3) || (rp->rmd2 & RMD2_ERR4)) {
#ifdef QTDEBUG
                        char buf[100];
                        snprintb(buf, sizeof(buf), RMD0_BITS, rp->rmd0);
                        printf("%s: rmd0 %s\n", device_xname(sc->sc_dev), buf);
                        snprintb(buf, sizeof(buf), RMD2_BITS, rp->rmd2);
                        printf("%s: rmd2 %s\n", device_xname(sc->sc_dev), buf);
#endif
                        if_statinc(&sc->is_if, if_ierrors);
                        goto rnext;
                }
                m = if_ubaget(&sc->sc_ifuba, &sc->sc_ifr[(int)sc->rindex],
                    ifp, len);
                if (m == NULL) {
                        if_statinc(&sc->is_if, if_ierrors);
                        goto rnext;
                }
                if_percpuq_enqueue(ifp->if_percpuq, m);
rnext:
                --sc->nrcv;
                rp->rmd3 = 0;
                rp->rmd1 = MCLBYTES;
                if (++sc->rindex >= NRCV)
                        sc->rindex = 0;
        }
        QT_WCSR(CSR_ARQR, ARQR_RRQ);    /* tell device it has buffer */
}

int
qtioctl(struct ifnet *ifp, u_long cmd, void *data)
{
        int s, error;

        s = splnet();

        error = ether_ioctl(ifp, cmd, data);
        if (error == ENETRESET) {
                if (ifp->if_flags & IFF_RUNNING)
                        error = qtinit(ifp);
                else
                        error = 0;
        }
        splx(s);
        return error;
}

void
qtsrr(struct qt_softc *sc, int srrbits)
{
        char buf[100];

        snprintb(buf, sizeof(buf), SRR_BITS, srrbits);
        printf("%s: srr=%s\n", device_xname(sc->sc_dev), buf);
}

/*
 * Stop activity on the interface.
 * Lose outstanding transmit requests. XXX - not good for multicast.
 */
void
qtstop(struct ifnet *ifp, int disable)
{
        struct qt_softc *sc = ifp->if_softc;
        int i;

        QT_WCSR(CSR_SRQR, 3);
        for (i = 0; i < 100; i++) {
                if ((QT_RCSR(CSR_SRR) & SRR_RESP) == 3)
                        break;
        }
        if (QT_RCSR(CSR_SRR) & SRR_FES)
                qtsrr(sc, QT_RCSR(CSR_SRR));
        /* Forget already queued transmit requests */
        while (sc->nxmit > 0) {
                if_ubaend(&sc->sc_ifuba, &sc->sc_ifw[sc->xlast]);
                if (++sc->xlast >= NXMT)
                        sc->xlast = 0;
                sc->nxmit--;
        }
        /* Handle late received packets */
        qtrint(sc);
        ifp->if_flags &= ~IFF_RUNNING;
}

#ifdef notyet
/*
 * Reset the device.  This moves it from DELQA-T mode to DELQA-Normal mode.
 * After the reset put the device back in -T mode.  Then call qtinit() to
 * reinitialize the ring structures and issue the 'timeout' for the "device
 * started interrupt".
 */

void
qtreset(struct qt_softc *sc)
{

        qtturbo(sc);
        qtinit(&sc->is_ec.ec_if);
}
#endif