/*      $NetBSD: internals.c,v 1.43 2023/08/01 07:56:23 mrg Exp $       */

/*-
 * Copyright (c) 1998-1999 Brett Lymn
 *                         (blymn@baea.com.au, brett_lymn@yahoo.com.au)
 * All rights reserved.
 *
 * This code has been donated to The NetBSD Foundation by the Author.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *
 */

#include <sys/cdefs.h>
__RCSID("$NetBSD: internals.c,v 1.43 2023/08/01 07:56:23 mrg Exp $");

#include <limits.h>
#include <ctype.h>
#include <stdio.h>
#include <stdlib.h>
#include <strings.h>
#include <assert.h>
#include <err.h>
#include <stdarg.h>
#include "internals.h"
#include "form.h"

#ifdef DEBUG
/*
 *  file handle to write debug info to, this will be initialised when
 *  the form is first posted.
 */

/*
 * map the request numbers to strings for debug
 */
static const char *reqs[] = {
        "NEXT_PAGE", "PREV_PAGE", "FIRST_PAGE", "LAST_PAGE", "NEXT_FIELD",
        "PREV_FIELD", "FIRST_FIELD", "LAST_FIELD", "SNEXT_FIELD",
        "SPREV_FIELD", "SFIRST_FIELD", "SLAST_FIELD", "LEFT_FIELD",
        "RIGHT_FIELD", "UP_FIELD", "DOWN_FIELD", "NEXT_CHAR", "PREV_CHAR",
        "NEXT_LINE", "PREV_LINE", "NEXT_WORD", "PREV_WORD", "BEG_FIELD",
        "END_FIELD", "BEG_LINE", "END_LINE", "LEFT_CHAR", "RIGHT_CHAR",
        "UP_CHAR", "DOWN_CHAR", "NEW_LINE", "INS_CHAR", "INS_LINE",
        "DEL_CHAR", "DEL_PREV", "DEL_LINE", "DEL_WORD", "CLR_EOL",
        "CLR_EOF", "CLR_FIELD", "OVL_MODE", "INS_MODE", "SCR_FLINE",
        "SCR_BLINE", "SCR_FPAGE", "SCR_BPAGE", "SCR_FHPAGE", "SCR_BHPAGE",
        "SCR_FCHAR", "SCR_BCHAR", "SCR_HFLINE", "SCR_HBLINE", "SCR_HFHALF",
        "SCR_HBHALF", "VALIDATION", "PREV_CHOICE", "NEXT_CHOICE" };
#endif

/* define our own min function - this is not generic but will do here
 * (don't believe me?  think about what value you would get
 * from min(x++, y++)
 */
#define min(a,b) (((a) > (b))? (b) : (a))

/* for the line joining function... */
#define JOIN_NEXT    1
#define JOIN_NEXT_NW 2 /* next join, don't wrap the joined line */
#define JOIN_PREV    3
#define JOIN_PREV_NW 4 /* previous join, don't wrap the joined line */

/* for the bump_lines function... */
#define _FORMI_USE_CURRENT -1 /* indicates current cursor pos to be used */

/* used in add_char for initial memory allocation for string in row */
#define INITIAL_LINE_ALLOC 16

unsigned
field_skip_blanks(unsigned int start, _FORMI_FIELD_LINES **rowp);
static void
_formi_do_char_validation(FIELD *field, FIELDTYPE *type, char c, int *ret_val);
static void
_formi_do_validation(FIELD *field, FIELDTYPE *type, int *ret_val);
static int
_formi_join_line(FIELD *field, _FORMI_FIELD_LINES **rowp, int direction);
void
_formi_hscroll_back(FIELD *field, _FORMI_FIELD_LINES *row, unsigned int amt);
void
_formi_hscroll_fwd(FIELD *field, _FORMI_FIELD_LINES *row, unsigned int amt);
static void
_formi_scroll_back(FIELD *field, unsigned int amt);
static void
_formi_scroll_fwd(FIELD *field, unsigned int amt);
static int
_formi_set_cursor_xpos(FIELD *field, int no_scroll);
static int
find_sow(unsigned int offset, _FORMI_FIELD_LINES **rowp);
static int
split_line(FIELD *field, bool hard_split, unsigned pos,
           _FORMI_FIELD_LINES **rowp);
static bool
check_field_size(FIELD *field);
static int
add_tab(FORM *form, _FORMI_FIELD_LINES *row, unsigned int i, char c);
static int
tab_size(_FORMI_FIELD_LINES *row, unsigned int i);
static unsigned int
tab_fit_len(_FORMI_FIELD_LINES *row, unsigned int len);
static int
tab_fit_window(FIELD *field, unsigned int pos, unsigned int window);
static void
add_to_free(FIELD *field, _FORMI_FIELD_LINES *line);
static void
adjust_ypos(FIELD *field, _FORMI_FIELD_LINES *line);
static _FORMI_FIELD_LINES *
copy_row(_FORMI_FIELD_LINES *row);
static void
destroy_row_list(_FORMI_FIELD_LINES *start);

/*
 * Calculate the cursor y position to make the given row appear on the
 * field.  This may be as simple as just changing the ypos (if at all) but
 * may encompass resetting the start_line of the field to place the line
 * at the bottom of the field.  The field is assumed to be a multi-line one.
 */
static void
adjust_ypos(FIELD *field, _FORMI_FIELD_LINES *line)
{
        unsigned ypos;
        _FORMI_FIELD_LINES *rs;
        
        ypos = 0;
        rs = field->alines;
        while (rs != line) {
                rs = rs->next;
                ypos++;
        }

        field->cursor_ypos = ypos;
        field->start_line = field->alines;
        if (ypos > (field->rows - 1)) {
                  /*
                   * cur_line off the end of the field,
                   * adjust start_line so fix this.
                   */
                field->cursor_ypos = field->rows - 1;
                ypos = ypos - (field->rows - 1);
                while (ypos > 0) {
                        ypos--;
                        field->start_line = field->start_line->next;
                }
        }
}

                        
/*
 * Delete the given row and add it to the free list of the given field.
 */
static void
add_to_free(FIELD *field, _FORMI_FIELD_LINES *line)
{
        _FORMI_FIELD_LINES *saved;

        saved = line;

          /* don't remove if only one line... */
        if ((line->prev == NULL) && (line->next == NULL))
                return;

        if (line->prev == NULL) {
                /* handle top of list */
                field->alines = line->next;
                field->alines->prev = NULL;

                if (field->cur_line == saved)
                        field->cur_line = field->alines;
                if (field->start_line == saved)
                        field->start_line = saved;
        } else if (line->next == NULL) {
                /* handle bottom of list */
                line->prev->next = NULL;
                if (field->cur_line == saved)
                        field->cur_line = saved->prev;
                if (field->start_line == saved)
                        field->cur_line = saved->prev;
        } else {
                saved->next->prev = saved->prev;
                saved->prev->next = saved->next;
                if (field->cur_line == saved)
                        field->cur_line = saved->prev;
                if (field->start_line == saved)
                        field->start_line = saved;
        }

        saved->next = field->free;
        field->free = saved;
        saved->prev = NULL;
        if (saved->next != NULL)
                saved->next->prev = line;
}

/*
 * Duplicate the given row, return the pointer to the new copy or
 * NULL if the copy fails.
 */
static _FORMI_FIELD_LINES *
copy_row(_FORMI_FIELD_LINES *row)
{
        _FORMI_FIELD_LINES *new;
        _formi_tab_t *tp, *newt;

        if ((new = malloc(sizeof(*new))) == NULL) {
                return NULL;
        }

        memcpy(new, row, sizeof(*new));
        
          /* nuke the pointers from the source row so we don't get confused */
        new->next = NULL;
        new->prev = NULL;
        new->tabs = NULL;

        if ((new->string = malloc((size_t)new->allocated)) == NULL) {
                free(new);
                return NULL;
        }

        memcpy(new->string, row->string, (size_t) row->length + 1);

        if (row->tabs != NULL) {
                tp = row->tabs;
                if ((new->tabs = malloc(sizeof(*new->tabs))) == NULL) {
                        free(new->string);
                        free(new);
                        return NULL;
                }

                memcpy(new->tabs, row->tabs, sizeof(*new->tabs));
                new->tabs->back = NULL;
                new->tabs->fwd = NULL;
                
                tp = tp->fwd;
                newt = new->tabs;

                while (tp != NULL) {
                        if ((newt->fwd = malloc(sizeof(*newt->fwd))) == NULL) {
                                /* error... unwind allocations */
                                tp = new->tabs;
                                while (tp != NULL) {
                                        newt = tp->fwd;
                                        free(tp);
                                        tp = newt;
                                }

                                free(new->string);
                                free(new);
                                return NULL;
                        }

                        memcpy(newt->fwd, tp, sizeof(*newt->fwd));
                        newt->fwd->back = newt;
                        newt = newt->fwd;
                        newt->fwd = NULL;
                        tp = tp->fwd;
                }
        }
                
        return new;
}
        
/*
 * Initialise the row offset for a field, depending on the type of
 * field it is and the type of justification used.  The justification
 * is only used on static single line fields, everything else will
 * have the cursor_xpos set to 0.
 */
void
_formi_init_field_xpos(FIELD *field)
{
          /* not static or is multi-line which are not justified, so 0 it is */
        if (((field->opts & O_STATIC) != O_STATIC) ||
            ((field->rows + field->nrows) != 1)) {
                field->cursor_xpos = 0;
                return;
        }

        switch (field->justification) {
        case JUSTIFY_RIGHT:
                field->cursor_xpos = field->cols - 1;
                break;

        case JUSTIFY_CENTER:
                field->cursor_xpos = (field->cols - 1) / 2;
                break;

        default: /* assume left justify */
                field->cursor_xpos = 0;
                break;
        }
}


/*
 * Open the debug file if it is not already open....
 */
#ifdef DEBUG
static FILE *dbg;
static const char dbg_file[] = "___form_dbg.out";

void
_formi_dbg_printf(const char *fmt, ...)
{
        va_list ap;

        if (dbg == NULL && (dbg = fopen(dbg_file, "w")) == NULL) {
                warn("Cannot open debug file `%s'", dbg_file);
                return;
        }
        va_start(ap, fmt);
        vfprintf(dbg, fmt, ap);
        va_end(ap);
}
#endif

/*
 * Check the sizing of the field, if the maximum size is set for a
 * dynamic field then check that the number of rows or columns does
 * not exceed the set maximum.  The decision to check the rows or
 * columns is made on the basis of how many rows are in the field -
 * one row means the max applies to the number of columns otherwise it
 * applies to the number of rows.  If the row/column count is less
 * than the maximum then return TRUE.
 *
 */
static bool
check_field_size(FIELD *field)
{
        if ((field->opts & O_STATIC) != O_STATIC) {
                  /* dynamic field */
                if (field->max == 0) /* unlimited */
                        return TRUE;

                if (field->rows == 1) {
                        return (field->alines->length < field->max);
                } else {
                        return (field->row_count <= field->max);
                }
        } else {
                if ((field->rows + field->nrows) == 1) {
                        return (field->alines->length <= field->cols);
                } else {
                        return (field->row_count <= (field->rows
                                                     + field->nrows));
                }
        }
}

/*
 * Set the form's current field to the first valid field on the page.
 * Assume the fields have been sorted and stitched.
 */
int
_formi_pos_first_field(FORM *form)
{
        FIELD *cur;
        int old_page;

        old_page = form->page;

          /* scan forward for an active page....*/
        while (form->page_starts[form->page].in_use == 0) {
                form->page++;
                if (form->page > form->max_page) {
                        form->page = old_page;
                        return E_REQUEST_DENIED;
                }
        }

          /* then scan for a field we can use */
        cur = form->fields[form->page_starts[form->page].first];
        while ((cur->opts & (O_VISIBLE | O_ACTIVE))
               != (O_VISIBLE | O_ACTIVE)) {
                cur = TAILQ_NEXT(cur, glue);
                if (cur == NULL) {
                        form->page = old_page;
                        return E_REQUEST_DENIED;
                }
        }

        form->cur_field = cur->index;
        return E_OK;
}

/*
 * Set the field to the next active and visible field, the fields are
 * traversed in index order in the direction given.  If the parameter
 * use_sorted is TRUE then the sorted field list will be traversed instead
 * of using the field index.
 */
int
_formi_pos_new_field(FORM *form, unsigned direction, unsigned use_sorted)
{
        FIELD *cur;
        int i;

        i = form->cur_field;
        cur = form->fields[i];

        do {
                if (direction == _FORMI_FORWARD) {
                        if (use_sorted == TRUE) {
                                if ((form->wrap == FALSE) &&
                                    (cur == TAILQ_LAST(&form->sorted_fields,
                                        _formi_sort_head)))
                                        return E_REQUEST_DENIED;
                                cur = TAILQ_NEXT(cur, glue);
                                i = cur->index;
                        } else {
                                if ((form->wrap == FALSE) &&
                                    ((i + 1) >= form->field_count))
                                        return E_REQUEST_DENIED;
                                i++;
                                if (i >= form->field_count)
                                        i = 0;
                        }
                } else {
                        if (use_sorted == TRUE) {
                                if ((form->wrap == FALSE) &&
                                    (cur == TAILQ_FIRST(&form->sorted_fields)))
                                        return E_REQUEST_DENIED;
                                cur = TAILQ_PREV(cur, _formi_sort_head, glue);
                                i = cur->index;
                        } else {
                                if ((form->wrap == FALSE) && (i <= 0))
                                        return E_REQUEST_DENIED;
                                i--;
                                if (i < 0)
                                        i = form->field_count - 1;
                        }
                }

                if ((form->fields[i]->opts & (O_VISIBLE | O_ACTIVE))
                        == (O_VISIBLE | O_ACTIVE)) {
                        form->cur_field = i;
                        return E_OK;
                }
        }
        while (i != form->cur_field);

        return E_REQUEST_DENIED;
}

/*
 * Destroy the list of line structs passed by freeing all allocated
 * memory.
 */
static void
destroy_row_list(_FORMI_FIELD_LINES *start)
{
        _FORMI_FIELD_LINES *temp, *row;
        _formi_tab_t *tt, *tp;

        row = start;
        while (row != NULL) {
                if (row->tabs != NULL) {
                          /* free up the tab linked list... */
                        tp = row->tabs;
                        while (tp != NULL) {
                                tt = tp->fwd;
                                free(tp);
                                tp = tt;
                        }
                }

                if (row->string != NULL)
                        free(row->string);

                temp = row->next;
                free(row);
                row = temp;
        }
}

/*
 * Word wrap the contents of the field's buffer 0 if this is allowed.
 * If the wrap is successful, that is, the row count nor the buffer
 * size is exceeded then the function will return E_OK, otherwise it
 * will return E_REQUEST_DENIED.
 */
int
_formi_wrap_field(FIELD *field, _FORMI_FIELD_LINES *loc)
{
        int width, wrap_err;
        unsigned int pos, saved_xpos, saved_ypos, saved_cur_xpos;
        unsigned int saved_row_count;
        _FORMI_FIELD_LINES *saved_row, *row, *row_backup, *saved_cur_line;
        _FORMI_FIELD_LINES *saved_start_line, *temp;

        if ((field->opts & O_STATIC) == O_STATIC) {
                if ((field->rows + field->nrows) == 1) {
                        return E_OK; /* cannot wrap a single line */
                }
                width = field->cols;
        } else {
                  /* if we are limited to one line then don't try to wrap */
                if ((field->drows + field->nrows) == 1) {
                        return E_OK;
                }

                  /*
                   * hueristic - if a dynamic field has more than one line
                   * on the screen then the field grows rows, otherwise
                   * it grows columns, effectively a single line field.
                   * This is documented AT&T behaviour.
                   */
                if (field->rows > 1) {
                        width = field->cols;
                } else {
                        return E_OK;
                }
        }

        row = loc;

          /* if we are not at the top of the field then back up one
           * row because we may be able to merge the current row into
           * the one above.
           */
        if (row->prev != NULL)
                row = row->prev;

        saved_row = row;
        saved_xpos = field->row_xpos;
        saved_cur_xpos = field->cursor_xpos;
        saved_ypos = field->cursor_ypos;
        saved_row_count = field->row_count;
        
          /*
           * Save a copy of the lines affected, just in case things
           * don't work out.
           */
        if ((row_backup = copy_row(row)) == NULL)
                return E_SYSTEM_ERROR;

        temp = row_backup;
        row = row->next;

        saved_cur_line = temp;
        saved_start_line = temp;
        
        while (row != NULL) {
                if ((temp->next = copy_row(row)) == NULL) {
                          /* a row copy failed... free up allocations */
                        destroy_row_list(row_backup);
                        return E_SYSTEM_ERROR;
                }

                temp->next->prev = temp;
                temp = temp->next;
                
                if (row == field->start_line)
                        saved_start_line = temp;
                if (row == field->cur_line)
                        saved_cur_line = temp;

                row = row->next;
        }

        row = saved_row;
        while (row != NULL) {
                pos = row->length - 1;
                if (row->expanded < width) {
                          /* line may be too short, try joining some lines */
                        if ((row->hard_ret == TRUE) && (row->next != NULL)) {
                                /*
                                 * Skip the line if it has a hard return
                                 * and it is not the last, we cannot join
                                 * anything to it.
                                 */
                                row = row->next;
                                continue;
                        }
                        
                        if (row->next == NULL) {
                                /*
                                 * If there are no more lines and this line
                                 * is too short then our job is over.
                                 */
                                break;
                        }

                        if (_formi_join_line(field, &row,
                                             JOIN_NEXT_NW) == E_OK) {
                                continue;
                        } else
                                break;
                } else if (row->expanded > width) {
                          /* line is too long, split it */

                          /*
                           * split on first whitespace before current word
                           * if the line has tabs we need to work out where
                           * the field border lies when the tabs are expanded.
                           */
                        if (row->tabs == NULL) {
                                pos = width - 1;
                                if (pos >= row->expanded)
                                        pos = row->expanded - 1;
                        } else {
                                pos = tab_fit_len(row, field->cols);
                        }

                        if ((!isblank((unsigned char)row->string[pos])) &&
                            ((field->opts & O_WRAP) == O_WRAP)) {
                                if (!isblank((unsigned char)row->string[pos - 1]))
                                        pos = find_sow((unsigned int) pos,
                                                       &row);
                                /*
                                 * If we cannot split the line then return
                                 * NO_ROOM so the driver can tell that it
                                 * should not autoskip (if that is enabled)
                                 */
                                if ((pos == 0)
                                    || (!isblank((unsigned char)row->string[pos - 1]))) {
                                        wrap_err = E_NO_ROOM;
                                        goto restore_and_exit;
                                }
                        }

                          /* if we are at the end of the string and it has
                           * a trailing blank, don't wrap the blank.
                           */
                        if ((row->next == NULL) && (pos == row->length - 1) &&
                            (isblank((unsigned char)row->string[pos])) &&
                            row->expanded <= field->cols)
                                continue;

                          /*
                           * otherwise, if we are still sitting on a
                           * blank but not at the end of the line
                           * move forward one char so the blank
                           * is on the line boundary.
                           */
                        if ((isblank((unsigned char)row->string[pos])) &&
                            (pos != row->length - 1))
                                pos++;

                        if (split_line(field, FALSE, pos, &row) != E_OK) {
                                wrap_err = E_REQUEST_DENIED;
                                goto restore_and_exit;
                        }
                } else
                          /* line is exactly the right length, do next one */
                        row = row->next;
        }

          /* Check if we have not run out of room */
        if ((((field->opts & O_STATIC) == O_STATIC) &&
             field->row_count > (field->rows + field->nrows)) ||
            ((field->max != 0) && (field->row_count > field->max))) {

                wrap_err = E_REQUEST_DENIED;

          restore_and_exit:
                if (saved_row->prev == NULL) {
                        field->alines = row_backup;
                } else {
                        saved_row->prev->next = row_backup;
                        row_backup->prev = saved_row->prev;
                }

                field->row_xpos = saved_xpos;
                field->cursor_xpos = saved_cur_xpos;
                field->cursor_ypos = saved_ypos;
                field->row_count = saved_row_count;
                field->start_line = saved_start_line;
                field->cur_line = saved_cur_line;

                destroy_row_list(saved_row);
                return wrap_err;
        }

        destroy_row_list(row_backup);
        return E_OK;
}

/*
 * Join the two lines that surround the location pos, the type
 * variable indicates the direction of the join, JOIN_NEXT will join
 * the next line to the current line, JOIN_PREV will join the current
 * line to the previous line, the new lines will be wrapped unless the
 * _NW versions of the directions are used.  Returns E_OK if the join
 * was successful or E_REQUEST_DENIED if the join cannot happen.
 */
static int
_formi_join_line(FIELD *field, _FORMI_FIELD_LINES **rowp, int direction)
{
        int old_len, count;
        struct _formi_field_lines *saved;
        char *newp;
        _FORMI_FIELD_LINES *row = *rowp;

        _formi_dbg_printf("%s: working on row %p, row_count = %d\n",
            __func__, row, field->row_count);

        if ((direction == JOIN_NEXT) || (direction == JOIN_NEXT_NW)) {
                  /*
                   * See if there is another line following, or if the
                   * line contains a hard return then we don't join
                   * any lines to it.
                   */
                if ((row->next == NULL) || (row->hard_ret == TRUE)) {
                        return E_REQUEST_DENIED;
                }

                _formi_dbg_printf(
                    "%s: join_next before length = %d, expanded = %d",
                    __func__, row->length, row->expanded);
                _formi_dbg_printf(
                    " :: next row length = %d, expanded = %d\n",
                    row->length, row->expanded);

                if (row->allocated < (row->length + row->next->length + 1)) {
                        if ((newp = realloc(row->string, (size_t)(row->length +
                                                          row->next->length
                                                          + 1))) == NULL)
                                return E_REQUEST_DENIED;
                        row->string = newp;
                        row->allocated = row->length + row->next->length + 1;
                }

                strcat(row->string, row->next->string);
                old_len = row->length;
                row->length += row->next->length;
                if (row->length > 0)
                        row->expanded =
                                _formi_tab_expanded_length(row->string, 0,
                                                           row->length - 1);
                else
                        row->expanded = 0;
                
                _formi_calculate_tabs(row);
                row->hard_ret = row->next->hard_ret;

                  /* adjust current line if it is on the row being eaten */
                if (field->cur_line == row->next) {
                        field->cur_line = row;
                        field->row_xpos += old_len;
                        field->cursor_xpos =
                                _formi_tab_expanded_length(row->string, 0,
                                                           field->row_xpos);
                        if (field->cursor_xpos > 0)
                                field->cursor_xpos--;
                        
                        if (field->cursor_ypos > 0)
                                field->cursor_ypos--;
                        else {
                                if (field->start_line->prev != NULL)
                                        field->start_line =
                                                field->start_line->prev;
                        }
                }

                  /* remove joined line record from the row list */
                add_to_free(field, row->next);

                _formi_dbg_printf(
                    "%s: exit length = %d, expanded = %d\n",
                    __func__, row->length, row->expanded);
        } else {
                if (row->prev == NULL) {
                        return E_REQUEST_DENIED;
                }

                saved = row->prev;

                  /*
                   * Don't try to join if the line above has a hard
                   * return on it.
                   */
                if (saved->hard_ret == TRUE) {
                        return E_REQUEST_DENIED;
                }

                _formi_dbg_printf(
                    "%s: join_prev before length = %d, expanded = %d",
                    __func__, row->length, row->expanded);
                _formi_dbg_printf(
                    " :: prev row length = %d, expanded = %d\n",
                    saved->length, saved->expanded);

                if (saved->allocated < (row->length + saved->length + 1)) {
                        if ((newp = realloc(saved->string,
                                            (size_t) (row->length +
                                                      saved->length
                                                      + 1))) == NULL)
                                return E_REQUEST_DENIED;
                        saved->string = newp;
                        saved->allocated = row->length + saved->length + 1;
                }

                strcat(saved->string, row->string);
                old_len = saved->length;
                saved->length += row->length;
                if (saved->length > 0)
                        saved->expanded =
                                _formi_tab_expanded_length(saved->string, 0,
                                                           saved->length - 1);
                else
                        saved->length = 0;

                saved->hard_ret = row->hard_ret;

                  /* adjust current line if it was on the row being eaten */
                if (field->cur_line == row) {
                        field->cur_line = saved;
                        field->row_xpos += old_len;
                        field->cursor_xpos =
                                _formi_tab_expanded_length(saved->string, 0,
                                                           field->row_xpos);
                        if (field->cursor_xpos > 0)
                                field->cursor_xpos--;
                }

                add_to_free(field, row);

                _formi_dbg_printf(
                    "%s: exit length = %d, expanded = %d\n", __func__,
                    saved->length, saved->expanded);
                row = saved;
        }


          /*
           * Work out where the line lies in the field in relation to
           * the cursor_ypos.  First count the rows from the start of
           * the field until we hit the row we just worked on.
           */
        saved = field->start_line;
        count = 0;
        while (saved->next != NULL) {
                if (saved == row)
                        break;
                count++;
                saved = saved->next;
        }

          /* now check if we need to adjust cursor_ypos */
        if (field->cursor_ypos > count) {
                field->cursor_ypos--;
        }
        
        field->row_count--;
        *rowp = row;

          /* wrap the field if required, if this fails undo the change */
        if ((direction == JOIN_NEXT) || (direction == JOIN_PREV)) {
                if (_formi_wrap_field(field, row) != E_OK) {
                        return E_REQUEST_DENIED;
                }
        }

        return E_OK;
}

/*
 * Split the line at the given position, if possible.  If hard_split is
 * TRUE then split the line regardless of the position, otherwise don't
 * split at the beginning of a line.
 */
static int
split_line(FIELD *field, bool hard_split, unsigned pos,
           _FORMI_FIELD_LINES **rowp)
{
        struct _formi_field_lines *new_line;
        char *newp;
        _FORMI_FIELD_LINES *row = *rowp;

          /* if asked to split right where the line already starts then
           * just return - nothing to do unless we are appending a line
           * to the buffer.
           */
        if ((pos == 0) && (hard_split == FALSE))
                return E_OK;

        _formi_dbg_printf("%s: splitting line at %d\n", __func__, pos);

          /* Need an extra line struct, check free list first */
        if (field->free != NULL) {
                new_line = field->free;
                field->free = new_line->next;
                if (field->free != NULL)
                        field->free->prev = NULL;
        } else {
                if ((new_line = malloc(sizeof(*new_line))) == NULL)
                        return E_SYSTEM_ERROR;
                new_line->prev = NULL;
                new_line->next = NULL;
                new_line->allocated = 0;
                new_line->length = 0;
                new_line->expanded = 0;
                new_line->string = NULL;
                new_line->hard_ret = FALSE;
                new_line->tabs = NULL;
        }

        _formi_dbg_printf("%s: enter: length = %d, expanded = %d\n", __func__,
            row->length, row->expanded);

        assert((row->length < INT_MAX) && (row->expanded < INT_MAX));


          /* add new line to the row list */
        new_line->next = row->next;
        new_line->prev = row;
        row->next = new_line;
        if (new_line->next != NULL)
                new_line->next->prev = new_line;

        new_line->length = row->length - pos;
        if (new_line->length >= new_line->allocated) {
                if ((newp = realloc(new_line->string,
                                    (size_t) new_line->length + 1)) == NULL)
                        return E_SYSTEM_ERROR;
                new_line->string = newp;
                new_line->allocated = new_line->length + 1;
        }

        strcpy(new_line->string, &row->string[pos]);

        row->length = pos;
        row->string[pos] = '\0';

        if (row->length != 0)
                row->expanded = _formi_tab_expanded_length(row->string, 0,
                                                           row->length - 1);
        else
                row->expanded = 0;
        _formi_calculate_tabs(row);

        if (new_line->length != 0)
                new_line->expanded =
                        _formi_tab_expanded_length(new_line->string, 0,
                                                   new_line->length - 1);
        else
                new_line->expanded = 0;

        _formi_calculate_tabs(new_line);

          /*
           * If the given row was the current line then adjust the
           * current line pointer if necessary
           */
        if ((field->cur_line == row) && (field->row_xpos >= pos)) {
                field->cur_line = new_line;
                field->row_xpos -= pos;
                field->cursor_xpos =
                        _formi_tab_expanded_length(new_line->string, 0,
                                                   field->row_xpos);
                if (field->cursor_xpos > 0)
                        field->cursor_xpos--;
                
                field->cursor_ypos++;
                if (field->cursor_ypos >= field->rows) {
                        if (field->start_line->next != NULL) {
                                field->start_line = field->start_line->next;
                                field->cursor_ypos = field->rows - 1;
                        }
                        else
                                assert(field->start_line->next == NULL);
                }
        }

          /*
           * If the line split had a hard return then replace the
           * current line's hard return with a soft return and carry
           * the hard return onto the line after.
           */
        if (row->hard_ret == TRUE) {
                new_line->hard_ret = TRUE;
                row->hard_ret = FALSE;
        }

          /*
           * except where we are doing a hard split then the current
           * row must have a hard return on it too...
           */
        if (hard_split == TRUE) {
                row->hard_ret = TRUE;
        }
        
        assert(((row->expanded < INT_MAX) &&
                (new_line->expanded < INT_MAX) &&
                (row->length < INT_MAX) &&
                (new_line->length < INT_MAX)));

        _formi_dbg_printf("%s: exit: ", __func__);
        _formi_dbg_printf("row.length = %d, row.expanded = %d, ",
            row->length, row->expanded);
        _formi_dbg_printf("next_line.length = %d, next_line.expanded = %d, ",
            new_line->length, new_line->expanded);
        _formi_dbg_printf("row_count = %d\n", field->row_count + 1);

        field->row_count++;
        *rowp = new_line;
        
        return E_OK;
}

/*
 * skip the blanks in the given string, start at the index start and
 * continue forward until either the end of the string or a non-blank
 * character is found.  Return the index of either the end of the string or
 * the first non-blank character.
 */
unsigned
_formi_skip_blanks(char *string, unsigned int start)
{
        unsigned int i;

        i = start;
        
        while ((string[i] != '\0') && isblank((unsigned char)string[i]))
                i++;

        return i;
}

/*
 * Skip the blanks in the string associated with the given row, pass back
 * the row and the offset at which the first non-blank is found.  If no
 * non-blank character is found then return the index to the last
 * character on the last line.
 */

unsigned
field_skip_blanks(unsigned int start, _FORMI_FIELD_LINES **rowp)
{
        unsigned int i;
        _FORMI_FIELD_LINES *row, *last = NULL;

        row = *rowp;
        i = start;

        do {
                i = _formi_skip_blanks(&row->string[i], i);
                if (!isblank((unsigned char)row->string[i])) {
                        last = row;
                        row = row->next;
                          /*
                           * don't reset if last line otherwise we will
                           * not be at the end of the string.
                           */
                        if (row != NULL)
                                i = 0;
                } else
                        break;
        }
        while (row != NULL);

          /*
           * If we hit the end of the row list then point at the last row
           * otherwise we return the row we found the blank on.
           */
        if (row == NULL)
                *rowp = last;
        else
                *rowp = row;

        return i;
}

/*
 * Return the index of the top left most field of the two given fields.
 */
static int
_formi_top_left(FORM *form, int a, int b)
{
          /* lower row numbers always win here.... */
        if (form->fields[a]->form_row < form->fields[b]->form_row)
                return a;

        if (form->fields[a]->form_row > form->fields[b]->form_row)
                return b;

          /* rows must be equal, check columns */
        if (form->fields[a]->form_col < form->fields[b]->form_col)
                return a;

        if (form->fields[a]->form_col > form->fields[b]->form_col)
                return b;

          /* if we get here fields must be in exactly the same place, punt */
        return a;
}

/*
 * Return the index to the field that is the bottom-right-most of the
 * two given fields.
 */
static int
_formi_bottom_right(FORM *form, int a, int b)
{
          /* check the rows first, biggest row wins */
        if (form->fields[a]->form_row > form->fields[b]->form_row)
                return a;
        if (form->fields[a]->form_row < form->fields[b]->form_row)
                return b;

          /* rows must be equal, check cols, biggest wins */
        if (form->fields[a]->form_col > form->fields[b]->form_col)
                return a;
        if (form->fields[a]->form_col < form->fields[b]->form_col)
                return b;

          /* fields in the same place, punt */
        return a;
}

/*
 * Find the end of the current word in the string str, starting at
 * offset - the end includes any trailing whitespace.  If the end of
 * the string is found before a new word then just return the offset
 * to the end of the string.  If do_join is TRUE then lines will be
 * joined (without wrapping) until either the end of the field or the
 * end of a word is found (whichever comes first).
 */
static int
find_eow(FIELD *cur, unsigned int offset, bool do_join,
         _FORMI_FIELD_LINES **rowp)
{
        int start;
        _FORMI_FIELD_LINES *row;

        row = *rowp;
        start = offset;

        do {
                  /* first skip any non-whitespace */
                while ((row->string[start] != '\0')
                       && !isblank((unsigned char)row->string[start]))
                        start++;

                  /* see if we hit the end of the string */
                if (row->string[start] == '\0') {
                        if (do_join == TRUE) {
                                if (row->next == NULL)
                                        return start;
                                
                                if (_formi_join_line(cur, &row, JOIN_NEXT_NW)
                                    != E_OK)
                                        return E_REQUEST_DENIED;
                        } else {
                                do {
                                        if (row->next == NULL) {
                                                *rowp = row;
                                                return start;
                                        } else {
                                                row = row->next;
                                                start = 0;
                                        }
                                } while (row->length == 0);
                        }
                }
        } while (!isblank((unsigned char)row->string[start]));

        do {
                  /* otherwise skip the whitespace.... */
                while ((row->string[start] != '\0')
                       && isblank((unsigned char)row->string[start]))
                        start++;

                if (row->string[start] == '\0') {
                        if (do_join == TRUE) {
                                if (row->next == NULL)
                                        return start;
                                
                                if (_formi_join_line(cur, &row, JOIN_NEXT_NW)
                                    != E_OK)
                                        return E_REQUEST_DENIED;
                        } else {
                                do {
                                        if (row->next == NULL) {
                                                *rowp = row;
                                                return start;
                                        } else {
                                                row = row->next;
                                                start = 0;
                                        }
                                } while (row->length == 0);
                        }
                }
        } while (isblank((unsigned char)row->string[start]));

        *rowp = row;
        return start;
}

/*
 * Find the beginning of the current word in the string str, starting
 * at offset.
 */
static int
find_sow(unsigned int offset, _FORMI_FIELD_LINES **rowp)
{
        int start;
        char *str;
        _FORMI_FIELD_LINES *row;

        row = *rowp;
        str = row->string;
        start = offset;

        do {
                if (start > 0) {
                        if (isblank((unsigned char)str[start]) ||
                            isblank((unsigned char)str[start - 1])) {
                                if (isblank((unsigned char)str[start - 1]))
                                        start--;
                                  /* skip the whitespace.... */
                                while ((start >= 0) &&
                                    isblank((unsigned char)str[start]))
                                        start--;
                        }
                }
                
                  /* see if we hit the start of the string */
                if (start < 0) {
                        do {
                                if (row->prev == NULL) {
                                        *rowp = row;
                                        start = 0;
                                        return start;
                                } else {
                                        row = row->prev;
                                        str = row->string;
                                        if (row->length > 0)
                                                start = row->length - 1;
                                        else
                                                start = 0;
                                }
                        } while (row->length == 0);
                }
        } while (isblank((unsigned char)row->string[start]));

          /* see if we hit the start of the string */
        if (start < 0) {
                *rowp = row;
                return 0;
        }

          /* now skip any non-whitespace */
        do {
                while ((start >= 0) && !isblank((unsigned char)str[start]))
                        start--;

                
                if (start < 0) {
                        do {
                                if (row->prev == NULL) {
                                        *rowp = row;
                                        start = 0;
                                        return start;
                                } else {
                                        row = row->prev;
                                        str = row->string;
                                        if (row->length > 0)
                                                start = row->length - 1;
                                        else
                                                start = 0;
                                }
                        } while (row->length == 0);
                }
        } while (!isblank((unsigned char)str[start]));
        
        if (start > 0) {
                start++; /* last loop has us pointing at a space, adjust */
                if (start >= row->length) {
                        if (row->next != NULL) {
                                start = 0;
                                row = row->next;
                        } else {
                                start = row->length - 1;
                        }
                }
        }
        
        if (start < 0)
                start = 0;

        *rowp = row;
        return start;
}

/*
 * Scroll the field forward the given number of lines.
 */
static void
_formi_scroll_fwd(FIELD *field, unsigned int amt)
{
        unsigned int count;
        _FORMI_FIELD_LINES *end_row;

        end_row = field->start_line;
          /* walk the line structs forward to find the bottom of the field */
        count = field->rows - 1;
        while ((count > 0) && (end_row->next != NULL))
        {
                count--;
                end_row = end_row->next;
        }

          /* check if there are lines to scroll */
        if ((count > 0) && (end_row->next == NULL))
                return;

          /*
           * ok, lines to scroll - do this by walking both the start_line
           * and the end_row at the same time for amt lines, we stop when
           * either we have done the number of lines or end_row hits the
           * last line in the field.
           */
        count = amt;
        while ((count > 0) && (end_row->next != NULL)) {
                count--;
                field->start_line = field->start_line->next;
                end_row = end_row->next;
        }
}

/*
 * Scroll the field backward the given number of lines.
 */
static void
_formi_scroll_back(FIELD *field, unsigned int amt)
{
        unsigned int count;

          /* check for lines above */
        if (field->start_line->prev == NULL)
                return;

          /*
           * Backward scroll is easy, follow row struct chain backward until
           * the number of lines done or we reach the top of the field.
           */
        count = amt;
        while ((count > 0) && (field->start_line->prev != NULL)) {
                count--;
                field->start_line = field->start_line->prev;
        }
}

/*
 * Scroll the field forward the given number of characters.
 */
void
_formi_hscroll_fwd(FIELD *field, _FORMI_FIELD_LINES *row, int unsigned amt)
{
        unsigned int end, scroll_amt, expanded;
        _formi_tab_t *ts;


        if ((row->tabs == NULL) || (row->tabs->in_use == FALSE)) {
                  /* if the line has no tabs things are easy... */
                end =  field->start_char + field->cols + amt - 1;
                scroll_amt = amt;
                if (end > row->length) {
                        end = row->length;
                        scroll_amt = end - field->start_char - field->cols + 1;
                }
        } else {
                  /*
                   * If there are tabs we need to add on the scroll amount,
                   * find the last char position that will fit into
                   * the field and finally fix up the start_char.  This
                   * is a lot of work but handling the case where there
                   * are not enough chars to scroll by amt is difficult.
                   */
                end = field->start_char + field->row_xpos + amt;
                if (end >= row->length)
                        end = row->length - 1;
                else {
                        expanded = _formi_tab_expanded_length(
                                row->string,
                                field->start_char + amt,
                                field->start_char + field->row_xpos + amt);
                        ts = row->tabs;
                          /* skip tabs to the lhs of our starting point */
                        while ((ts != NULL) && (ts->in_use == TRUE)
                               && (ts->pos < end))
                                ts = ts->fwd;

                        while ((expanded <= field->cols)
                               && (end < row->length)) {
                                if (row->string[end] == '\t') {
                                        assert((ts != NULL)
                                               && (ts->in_use == TRUE));
                                        if (ts->pos == end) {
                                                if ((expanded + ts->size)
                                                    > field->cols)
                                                        break;
                                                expanded += ts->size;
                                                ts = ts->fwd;
                                        }
                                        else
                                                assert(ts->pos == end);
                                } else
                                        expanded++;
                                end++;
                        }
                }

                scroll_amt = tab_fit_window(field, end, field->cols);
                if (scroll_amt < field->start_char)
                        scroll_amt = 1;
                else
                        scroll_amt -= field->start_char;

                scroll_amt = min(scroll_amt, amt);
        }

        field->start_char += scroll_amt;
        field->cursor_xpos =
                _formi_tab_expanded_length(row->string,
                                           field->start_char,
                                           field->row_xpos
                                           + field->start_char) - 1;

}

/*
 * Scroll the field backward the given number of characters.
 */
void
_formi_hscroll_back(FIELD *field, _FORMI_FIELD_LINES *row, unsigned int amt)
{
        field->start_char -= min(field->start_char, amt);
        field->cursor_xpos =
                _formi_tab_expanded_length(row->string, field->start_char,
                                           field->row_xpos
                                           + field->start_char) - 1;
        if (field->cursor_xpos >= field->cols) {
                field->row_xpos = 0;
                field->cursor_xpos = 0;
        }
}

/*
 * Find the different pages in the form fields and assign the form
 * page_starts array with the information to find them.
 */
int
_formi_find_pages(FORM *form)
{
        int i, cur_page = 0;

        if ((form->page_starts = calloc((form->max_page + 1),
            sizeof(*form->page_starts))) == NULL)
                return E_SYSTEM_ERROR;

        for (i = 0; i < form->field_count; i++) {
                if (form->fields[i]->page_break == 1)
                        cur_page++;
                if (form->page_starts[cur_page].in_use == 0) {
                        form->page_starts[cur_page].in_use = 1;
                        form->page_starts[cur_page].first = i;
                        form->page_starts[cur_page].last = i;
                        form->page_starts[cur_page].top_left = i;
                        form->page_starts[cur_page].bottom_right = i;
                } else {
                        form->page_starts[cur_page].last = i;
                        form->page_starts[cur_page].top_left =
                                _formi_top_left(form,
                                                form->page_starts[cur_page].top_left,
                                                i);
                        form->page_starts[cur_page].bottom_right =
                                _formi_bottom_right(form,
                                                    form->page_starts[cur_page].bottom_right,
                                                    i);
                }
        }

        return E_OK;
}

/*
 * Completely redraw the field of the given form.
 */
void
_formi_redraw_field(FORM *form, int field)
{
        unsigned int pre, post, flen, slen, i, j, start, line;
        unsigned int tab, cpos, len;
        char *str, c;
        FIELD *cur;
        _FORMI_FIELD_LINES *row;
#ifdef DEBUG
        char buffer[100];
#endif

        cur = form->fields[field];
        flen = cur->cols;
        slen = 0;
        start = 0;
        line = 0;

        for (row = cur->start_line; ((row != NULL) && (line < cur->rows));
             row = row->next, line++) {
                wmove(form->scrwin, (int) (cur->form_row + line),
                      (int) cur->form_col);
                if ((cur->rows + cur->nrows) == 1) {
                        if ((cur->cols + cur->start_char) >= row->length)
                                len = row->length;
                        else
                                len = cur->cols + cur->start_char;
                        if (row->string != NULL)
                                slen = _formi_tab_expanded_length(
                                        row->string, cur->start_char, len);
                        else
                                slen = 0;
                        
                        if (slen > cur->cols)
                                slen = cur->cols;
                        slen += cur->start_char;
                } else
                        slen = row->expanded;

                if ((cur->opts & O_STATIC) == O_STATIC) {
                        switch (cur->justification) {
                        case JUSTIFY_RIGHT:
                                post = 0;
                                if (flen < slen)
                                        pre = 0;
                                else
                                        pre = flen - slen;
                                break;

                        case JUSTIFY_CENTER:
                                if (flen < slen) {
                                        pre = 0;
                                        post = 0;
                                } else {
                                        pre = flen - slen;
                                        post = pre = pre / 2;
                                          /* get padding right if
                                             centring is not even */
                                        if ((post + pre + slen) < flen)
                                                post++;
                                }
                                break;

                        case NO_JUSTIFICATION:
                        case JUSTIFY_LEFT:
                        default:
                                pre = 0;
                                if (flen <= slen)
                                        post = 0;
                                else {
                                        post = flen - slen;
                                        if (post > flen)
                                                post = flen;
                                }
                                break;
                        }
                } else {
                          /* dynamic fields are not justified */
                        pre = 0;
                        if (flen <= slen)
                                post = 0;
                        else {
                                post = flen - slen;
                                if (post > flen)
                                        post = flen;
                        }

                          /* but they do scroll.... */

                        if (pre > cur->start_char - start)
                                pre = pre - cur->start_char + start;
                        else
                                pre = 0;

                        if (slen > cur->start_char) {
                                slen -= cur->start_char;
                                if (slen > flen)
                                        post = 0;
                                else
                                        post = flen - slen;

                                if (post > flen)
                                        post = flen;
                        } else {
                                slen = 0;
                                post = flen - pre;
                        }
                }

                str = &row->string[cur->start_char];

#ifdef DEBUG
                _formi_dbg_printf(
                    "%s: start=%d, pre=%d, slen=%d, flen=%d, post=%d, "
                    "start_char=%d\n", __func__,
                    start, pre, slen, flen, post, cur->start_char);
                if (str != NULL) {
                        if (row->expanded != 0) {
                                strncpy(buffer, str, flen);
                        } else {
                                strcpy(buffer, "(empty)");
                        }
                } else {
                        strcpy(buffer, "(null)");
                }
                buffer[flen] = '\0';
                _formi_dbg_printf("%s: %s\n", __func__,  buffer);
#endif

                wattrset(form->scrwin, cur->back);

                for (i = start + cur->start_char; i < pre; i++)
                        waddch(form->scrwin, cur->pad);

                _formi_dbg_printf("%s: will add %d chars\n", __func__,
                        min(slen, flen));
                wattrset(form->scrwin, cur->fore);
                for (i = 0, cpos = cur->start_char; i < min(slen, flen);
                     i++, str++, cpos++) 
                {
                        c = *str;
                        tab = 0; /* just to shut gcc up */
                        _formi_dbg_printf("adding char str[%d]=%c\n",
                            cpos + cur->start_char,     c);
                        if (((cur->opts & O_PUBLIC) != O_PUBLIC)) {
                                if (c == '\t')
                                        tab = add_tab(form, row, cpos,
                                                      cur->pad);
                                else {
                                        wattrset(form->scrwin, cur->back);
                                        waddch(form->scrwin, cur->pad);
                                        wattrset(form->scrwin, cur->fore);
                                }
                        } else if ((cur->opts & O_VISIBLE) == O_VISIBLE) {
                                if (c == '\t')
                                        tab = add_tab(form, row, cpos, ' ');
                                else
                                        waddch(form->scrwin, c);
                        } else {
                                if (c == '\t')
                                        tab = add_tab(form, row, cpos, ' ');
                                else
                                        waddch(form->scrwin, ' ');
                        }

                          /*
                           * If we have had a tab then skip forward
                           * the requisite number of chars to keep
                           * things in sync.
                           */
                        if (c == '\t')
                                i += tab - 1;
                }

                wattrset(form->scrwin, cur->back);
                for (i = 0; i < post; i++)
                        waddch(form->scrwin, cur->pad);
        }

        for (i = line; i < cur->rows; i++) {
                wmove(form->scrwin, (int) (cur->form_row + i),
                      (int) cur->form_col);

                wattrset(form->scrwin, cur->back);

                for (j = 0; j < cur->cols; j++) {
                        waddch(form->scrwin, cur->pad);
                }
        }

        wattrset(form->scrwin, cur->back);

        cur = form->fields[form->cur_field];
        wmove(form->scrwin, cur->form_row + cur->cursor_ypos,
            cur->form_col + cur->cursor_xpos);
        wcursyncup(form->scrwin);

        return;
}

/*
 * Add the correct number of the given character to simulate a tab
 * in the field.
 */
static int
add_tab(FORM *form, _FORMI_FIELD_LINES *row, unsigned int i, char c)
{
        int j;
        _formi_tab_t *ts = row->tabs;

        while ((ts != NULL) && (ts->pos != i))
                ts = ts->fwd;

        assert(ts != NULL);

        for (j = 0; j < ts->size; j++)
                waddch(form->scrwin, c);

        return ts->size;
}


/*
 * Display the fields attached to the form that are on the current page
 * on the screen.
 *
 */
int
_formi_draw_page(FORM *form)
{
        int i;

        if (form->page_starts[form->page].in_use == 0)
                return E_BAD_ARGUMENT;

        wclear(form->scrwin);

        for (i = form->page_starts[form->page].first;
             i <= form->page_starts[form->page].last; i++)
                _formi_redraw_field(form, i);

        return E_OK;
}

/*
 * Add the character c at the position pos in buffer 0 of the given field
 */
int
_formi_add_char(FIELD *field, unsigned int pos, char c)
{
        char *new, old_c;
        unsigned int new_size;
        int status;
        _FORMI_FIELD_LINES *row, *temp, *next_temp;

        row = field->cur_line;

          /*
           * If buffer has not had a string before, set it to a blank
           * string.  Everything should flow from there....
           */
        if (row->string == NULL) {
                if ((row->string = malloc((size_t)INITIAL_LINE_ALLOC)) == NULL)
                        return E_SYSTEM_ERROR;
                row->string[0] = '\0';
                row->allocated = INITIAL_LINE_ALLOC;
                row->length = 0;
                row->expanded = 0;
        }

        if (_formi_validate_char(field, c) != E_OK) {
                _formi_dbg_printf("%s: char %c failed char validation\n",
                    __func__, c);
                return E_INVALID_FIELD;
        }

        if ((c == '\t') && (field->cols <= 8)) {
                _formi_dbg_printf("%s: field too small for a tab\n", __func__);
                return E_NO_ROOM;
        }

        _formi_dbg_printf("%s: pos=%d, char=%c\n", __func__, pos, c);
        _formi_dbg_printf("%s: xpos=%d, row_pos=%d, start=%d\n", __func__,
                field->cursor_xpos, field->row_xpos, field->start_char);
        _formi_dbg_printf("%s: length=%d(%d), allocated=%d\n", __func__,
                row->expanded, row->length, row->allocated);
        _formi_dbg_printf("%s: %s\n", __func__, row->string);
        _formi_dbg_printf("%s: buf0_status=%d\n", __func__, field->buf0_status);
        if (((field->opts & O_BLANK) == O_BLANK) &&
            (field->buf0_status == FALSE) &&
            ((field->row_xpos + field->start_char) == 0)) {
                row = field->alines;
                if (row->next != NULL) {
                          /* shift all but one line structs to free list */
                        temp = row->next;
                        do {
                                next_temp = temp->next;
                                add_to_free(field, temp);
                                temp = next_temp;
                        } while (temp != NULL);
                }

                row->length = 0;
                row->string[0] = '\0';
                pos = 0;
                field->start_char = 0;
                field->start_line = row;
                field->cur_line = row;
                field->row_count = 1;
                field->row_xpos = 0;
                field->cursor_ypos = 0;
                row->expanded = 0;
                row->length = 0;
                _formi_init_field_xpos(field);
        }


        if ((field->overlay == 0)
            || ((field->overlay == 1) && (pos >= row->length))) {
                  /* first check if the field can have more chars...*/
                if (check_field_size(field) == FALSE)
                        return E_REQUEST_DENIED;

                if (row->length + 2
                    >= row->allocated) {
                        new_size = row->allocated + 16 - (row->allocated % 16);
                        if ((new = realloc(row->string,
                                                  (size_t) new_size )) == NULL)
                                return E_SYSTEM_ERROR;
                        row->allocated = new_size;
                        row->string = new;
                }
        }

        if ((field->overlay == 0) && (row->length > pos)) {
                memmove(&row->string[pos + 1], &row->string[pos],
                      (size_t) (row->length - pos + 1));
        }

        old_c = row->string[pos];
        row->string[pos] = c;
        if (pos >= row->length) {
                  /* make sure the string is terminated if we are at the
                   * end of the string, the terminator would be missing
                   * if we are at the end of the field.
                   */
                row->string[pos + 1] = '\0';
        }

          /* only increment the length if we are inserting characters
           * OR if we are at the end of the field in overlay mode.
           */
        if ((field->overlay == 0)
            || ((field->overlay == 1) && (pos >= row->length))) {
                row->length++;
        }

        _formi_calculate_tabs(row);
        row->expanded = _formi_tab_expanded_length(row->string, 0,
                                                   row->length - 1);

          /* wrap the field, if needed */
        status = _formi_wrap_field(field, row);

        row = field->cur_line;
        pos = field->row_xpos;

          /*
           * check the wrap worked or that we have not exceeded the
           * max field size - this can happen if the field is re-wrapped
           * and the row count is increased past the set limit.
           */
        if ((status != E_OK) || (check_field_size(field) == FALSE)) {
                if ((field->overlay == 0)
                    || ((field->overlay == 1)
                        && (pos >= (row->length - 1) /*XXXX- append check???*/))) {
                          /*
                           * wrap failed for some reason, back out the
                           * char insert
                           */
                        memmove(&row->string[pos], &row->string[pos + 1],
                              (size_t) (row->length - pos));
                        row->length--;
                        if (pos > 0)
                                pos--;
                } else if (field->overlay == 1) {
                          /* back out character overlay */
                        row->string[pos] = old_c;
                }

                _formi_calculate_tabs(row);

                _formi_wrap_field(field, row);
                  /*
                   * If we are here then either the status is bad or we
                   * simply ran out of room.  If the status is E_OK then
                   * we ran out of room, let the form driver know this.
                   */
                if (status == E_OK)
                        status = E_REQUEST_DENIED;

        } else {
                field->buf0_status = TRUE;
                field->row_xpos++;
                if ((field->rows + field->nrows) == 1) {
                        status = _formi_set_cursor_xpos(field, FALSE);
                } else {
                        field->cursor_xpos =
                                _formi_tab_expanded_length(
                                        row->string, 0, field->row_xpos - 1);

                          /*
                           * Annoying corner case - if we are right in
                           * the bottom right corner of the field we
                           * need to scroll the field one line so the
                           * cursor is positioned correctly in the
                           * field.
                           */
                        if ((field->cursor_xpos >= field->cols) &&
                            (field->cursor_ypos == (field->rows - 1))) {
                                field->cursor_ypos--;
                                field->start_line = field->start_line->next;
                        }
                }
        }

        assert((field->cursor_xpos <= field->cols)
               && (field->cursor_ypos < 400000));

        _formi_dbg_printf("%s: xpos=%d, row_pos=%d, start=%d\n", __func__,
                field->cursor_xpos, field->row_xpos, field->start_char);
        _formi_dbg_printf("%s: length=%d(%d), allocated=%d\n", __func__,
                row->expanded, row->length, row->allocated);
        _formi_dbg_printf("%s: ypos=%d, start_line=%p\n", __func__,
                field->cursor_ypos, field->start_line);
        _formi_dbg_printf("%s: %s\n", __func__, row->string);
        _formi_dbg_printf("%s: buf0_status=%d\n", __func__, field->buf0_status);
        _formi_dbg_printf("%s: status = %s\n", __func__,
                (status == E_OK)? "OK" : "FAILED");
        return status;
}

/*
 * Set the position of the cursor on the screen in the row depending on
 * where the current position in the string is and the justification
 * that is to be applied to the field.  Justification is only applied
 * to single row, static fields.
 */
static int
_formi_set_cursor_xpos(FIELD *field, int noscroll)
{
        int just, pos;

        just = field->justification;
        pos = field->start_char + field->row_xpos;

        _formi_dbg_printf(
            "%s: pos %d, start_char %d, row_xpos %d, xpos %d\n", __func__,
            pos, field->start_char, field->row_xpos, field->cursor_xpos);

          /*
           * make sure we apply the correct justification to non-static
           * fields.
           */
        if (((field->rows + field->nrows) != 1) ||
            ((field->opts & O_STATIC) != O_STATIC))
                just = JUSTIFY_LEFT;

        switch (just) {
        case JUSTIFY_RIGHT:
                field->cursor_xpos = field->cols - 1
                        - _formi_tab_expanded_length(
                                field->cur_line->string, 0,
                                field->cur_line->length - 1)
                        + _formi_tab_expanded_length(
                                field->cur_line->string, 0,
                                field->row_xpos);
                break;

        case JUSTIFY_CENTER:
                field->cursor_xpos = ((field->cols - 1) 
                        - _formi_tab_expanded_length(
                                field->cur_line->string, 0,
                                field->cur_line->length - 1) + 1) / 2
                        + _formi_tab_expanded_length(field->cur_line->string,
                                                     0, field->row_xpos);

                if (field->cursor_xpos > (field->cols - 1))
                        field->cursor_xpos = (field->cols - 1);
                break;

        default:
                field->cursor_xpos = _formi_tab_expanded_length(
                        field->cur_line->string,
                        field->start_char,
                        field->row_xpos + field->start_char);
                if ((field->cursor_xpos <= (field->cols - 1)) &&
                    ((field->start_char + field->row_xpos)
                     < field->cur_line->length))
                        field->cursor_xpos--;

                if (field->cursor_xpos > (field->cols - 1)) {
                        if ((field->opts & O_STATIC) == O_STATIC) {
                                field->start_char = 0;

                                if (field->row_xpos
                                    == (field->cur_line->length - 1)) {
                                        field->cursor_xpos = field->cols - 1;
                                } else {
                                        field->cursor_xpos =
                                                _formi_tab_expanded_length(
                                                  field->cur_line->string,
                                                  field->start_char,
                                                  field->row_xpos
                                                    + field->start_char
                                                  - 1) - 1;
                                }
                        } else {
                                if (noscroll == FALSE) {
                                        field->start_char =
                                                tab_fit_window(
                                                        field,
                                                        field->start_char
                                                        + field->row_xpos,
                                                        field->cols);
                                        field->row_xpos = pos
                                                - field->start_char;
                                        field->cursor_xpos =
                                                _formi_tab_expanded_length(
                                                   field->cur_line->string,
                                                   field->start_char,
                                                   field->row_xpos
                                                      + field->start_char - 1);
                                } else {
                                        field->cursor_xpos = (field->cols - 1);
                                }
                        }

                }
                break;
        }

        _formi_dbg_printf(
            "%s: pos %d, start_char %d, row_xpos %d, xpos %d\n", __func__,
            pos, field->start_char, field->row_xpos, field->cursor_xpos);
        return E_OK;
}

/*
 * Manipulate the text in a field, this takes the given form and performs
 * the passed driver command on the current text field.  Returns 1 if the
 * text field was modified.
 */
int
_formi_manipulate_field(FORM *form, int c)
{
        FIELD *cur;
        char *str, saved;
        unsigned int start, end, pos, status, old_count, size;
        unsigned int old_xpos, old_row_pos;
        int len, wb;
        bool eat_char;
        _FORMI_FIELD_LINES *row, *rs;

        cur = form->fields[form->cur_field];
        if (cur->cur_line->string == NULL)
                return E_REQUEST_DENIED;

        _formi_dbg_printf("%s: request is REQ_%s\n",
            __func__, reqs[c - REQ_MIN_REQUEST]);
        _formi_dbg_printf(
            "%s: xpos=%d, row_pos=%d, start_char=%d, length=%d, allocated=%d\n",
            __func__, cur->cursor_xpos, cur->row_xpos, cur->start_char,
            cur->cur_line->length, cur->cur_line->allocated);
        _formi_dbg_printf("%s: start_line=%p, ypos=%d\n", __func__,
            cur->start_line, cur->cursor_ypos);
        if (cur->cur_line->string == NULL)
                _formi_dbg_printf("%s: string=(null)\n", __func__);
        else
                _formi_dbg_printf("%s: string=\"%s\"\n", __func__,
                    cur->cur_line->string);

          /* Cannot manipulate a null string! */
        if (cur->cur_line->string == NULL)
                return E_REQUEST_DENIED;

        saved = '\0';
        row = cur->cur_line;

        switch (c) {
        case REQ_RIGHT_CHAR:
                  /*
                   * The right_char request performs the same function
                   * as the next_char request except that the cursor is
                   * not wrapped if it is at the end of the line, so
                   * check if the cursor is at the end of the line and
                   * deny the request otherwise just fall through to
                   * the next_char request handler.
                   */
                if (cur->cursor_xpos >= cur->cols - 1)
                        return E_REQUEST_DENIED;

                  /* FALLTHRU */

        case REQ_NEXT_CHAR:
                  /* for a dynamic field allow an offset of one more
                   * char so we can insert chars after end of string.
                   * Static fields cannot do this so deny request if
                   * cursor is at the end of the field.
                   */
                if (((cur->opts & O_STATIC) == O_STATIC) &&
                    (cur->row_xpos == cur->cols - 1) &&
                    ((cur->rows + cur->nrows) == 1))
                        return E_REQUEST_DENIED;

                if (((cur->rows + cur->nrows) == 1) &&
                    (cur->row_xpos + cur->start_char + 1) > row->length)
                        return E_REQUEST_DENIED;

                if ((cur->rows + cur->nrows) == 1) {
                        cur->row_xpos++;
                        _formi_set_cursor_xpos(cur, (c == REQ_RIGHT_CHAR));
                } else {
                        if (cur->cursor_xpos >= (row->expanded - 1)) {
                                if ((row->next == NULL) ||
                                    (c == REQ_RIGHT_CHAR))
                                        return E_REQUEST_DENIED;

                                cur->cursor_xpos = 0;
                                cur->row_xpos = 0;
                                cur->cur_line = cur->cur_line->next;
                                if (cur->cursor_ypos == (cur->rows - 1))
                                        cur->start_line =
                                                cur->start_line->next;
                                else
                                        cur->cursor_ypos++;
                        } else {
                                old_xpos = cur->cursor_xpos;
                                old_row_pos = cur->row_xpos;
                                if (row->string[cur->row_xpos] == '\t')
                                        cur->cursor_xpos += tab_size(row,
                                                        cur->row_xpos);
                                else
                                        cur->cursor_xpos++;
                                cur->row_xpos++;
                                if (cur->cursor_xpos
                                    >= row->expanded) {
                                        if ((row->next == NULL) ||
                                            (c == REQ_RIGHT_CHAR)) {
                                                cur->cursor_xpos = old_xpos;
                                                cur->row_xpos = old_row_pos;
                                                return E_REQUEST_DENIED;
                                        }

                                        cur->cursor_xpos = 0;
                                        cur->row_xpos = 0;
                                        cur->cur_line = cur->cur_line->next;
                                        if (cur->cursor_ypos
                                            == (cur->rows - 1))
                                                cur->start_line =
                                                        cur->start_line->next;
                                        else
                                                cur->cursor_ypos++;
                                }
                        }
                }

                break;

        case REQ_LEFT_CHAR:
                  /*
                   * The behaviour of left_char is the same as prev_char
                   * except that the cursor will not wrap if it has
                   * reached the LHS of the field, so just check this
                   * and fall through if we are not at the LHS.
                   */
                if (cur->cursor_xpos == 0)
                        return E_REQUEST_DENIED;

                  /* FALLTHRU */
        case REQ_PREV_CHAR:
                if ((cur->rows + cur->nrows) == 1) {
                        if (cur->row_xpos == 0) {
                                if (cur->start_char > 0)
                                        cur->start_char--;
                                else
                                        return E_REQUEST_DENIED;
                        } else {
                                cur->row_xpos--;
                                _formi_set_cursor_xpos(cur, FALSE);
                        }
                } else {
                        if ((cur->cursor_xpos == 0) &&
                            (cur->cursor_ypos == 0) &&
                            (cur->start_line->prev == NULL))
                                return E_REQUEST_DENIED;

                        pos = cur->row_xpos;
                        if (cur->cursor_xpos > 0) {
                                if (row->string[pos] == '\t') {
                                        size = tab_size(row, pos);
                                        if (size > cur->cursor_xpos) {
                                                cur->cursor_xpos = 0;
                                                cur->row_xpos = 0;
                                        } else {
                                                cur->row_xpos--;
                                                cur->cursor_xpos -= size;
                                        }
                                } else {
                                        cur->cursor_xpos--;
                                        cur->row_xpos--;
                                }
                        } else {
                                cur->cur_line = cur->cur_line->prev;
                                if (cur->cursor_ypos > 0)
                                        cur->cursor_ypos--;
                                else
                                        cur->start_line =
                                                cur->start_line->prev;
                                row = cur->cur_line;
                                if (row->expanded > 0) {
                                        cur->cursor_xpos = row->expanded - 1;
                                } else {
                                        cur->cursor_xpos = 0;
                                }

                                if (row->length > 0)
                                        cur->row_xpos = row->length - 1;
                                else
                                        cur->row_xpos = 0;
                        }
                }

                break;

        case REQ_DOWN_CHAR:
                  /*
                   * The down_char request has the same functionality as
                   * the next_line request excepting that the field is not
                   * scrolled if the cursor is at the bottom of the field.
                   * Check to see if the cursor is at the bottom of the field
                   * and if it is then deny the request otherwise fall
                   * through to the next_line handler.
                   */
                if (cur->cursor_ypos >= cur->rows - 1)
                        return E_REQUEST_DENIED;

                  /* FALLTHRU */

        case REQ_NEXT_LINE:
                if ((row->next == NULL) || (cur->cur_line->next == NULL))
                        return E_REQUEST_DENIED;

                cur->cur_line = cur->cur_line->next;
                if ((cur->cursor_ypos + 1) >= cur->rows) {
                        cur->start_line = cur->start_line->next;
                } else
                        cur->cursor_ypos++;
                row = cur->cur_line;

                if (row->length == 0) {
                        cur->row_xpos = 0;
                        cur->cursor_xpos = 0;
                } else {
                        if (cur->cursor_xpos > (row->expanded - 1))
                                cur->cursor_xpos = row->expanded - 1;

                        cur->row_xpos = tab_fit_len(row, cur->cursor_xpos + 1);
                        if (cur->row_xpos == 0)
                                cur->cursor_xpos = 0;
                        else
                                cur->cursor_xpos =
                                        _formi_tab_expanded_length(
                                                row->string, 0, cur->row_xpos);
                        if (cur->cursor_xpos > 0)
                                cur->cursor_xpos--;
                }
                break;

        case REQ_UP_CHAR:
                  /*
                   * The up_char request has the same functionality as
                   * the prev_line request excepting the field is not
                   * scrolled, check if the cursor is at the top of the
                   * field, if it is deny the request otherwise fall
                   * through to the prev_line handler.
                   */
                if (cur->cursor_ypos == 0)
                        return E_REQUEST_DENIED;

                  /* FALLTHRU */

        case REQ_PREV_LINE:
                if (cur->cur_line->prev == NULL)
                        return E_REQUEST_DENIED;

                if (cur->cursor_ypos == 0) {
                        if (cur->start_line->prev == NULL)
                                return E_REQUEST_DENIED;
                        cur->start_line = cur->start_line->prev;
                } else
                        cur->cursor_ypos--;

                cur->cur_line = cur->cur_line->prev;
                row = cur->cur_line;

                if (row->length == 0) {
                        cur->row_xpos = 0;
                        cur->cursor_xpos = 0;
                } else {
                        if (cur->cursor_xpos > (row->expanded - 1))
                                cur->cursor_xpos = row->expanded - 1;

                        cur->row_xpos = tab_fit_len(row, cur->cursor_xpos + 1);
                        cur->cursor_xpos =
                                _formi_tab_expanded_length(row->string,
                                                           0, cur->row_xpos);
                        if (cur->cursor_xpos > 0)
                                cur->cursor_xpos--;
                }
                break;

        case REQ_NEXT_WORD:
                start = cur->row_xpos + cur->start_char;
                str = row->string;

                wb = find_eow(cur, start, FALSE, &row);
                if (wb < 0)
                        return wb;

                start = wb;
                  /* check if we hit the end */
                if (str[start] == '\0')
                        return E_REQUEST_DENIED;

                  /* otherwise we must have found the start of a word...*/
                if ((cur->rows + cur->nrows) == 1) {
                          /* single line field */
                        size = _formi_tab_expanded_length(str,
                                cur->start_char, start);
                        if (size < cur->cols) {
                                cur->row_xpos = start - cur->start_char;
                        } else {
                                cur->start_char = start;
                                cur->row_xpos = 0;
                        }
                        _formi_set_cursor_xpos(cur, FALSE);
                } else {
                          /* multiline field */
                        cur->cur_line = row;
                        adjust_ypos(cur, row);

                        cur->row_xpos = start;
                        cur->cursor_xpos =
                                _formi_tab_expanded_length(
                                        row->string, 0, cur->row_xpos) - 1;
                }
                break;
                
        case REQ_PREV_WORD:
                start = cur->start_char + cur->row_xpos;
                if (cur->start_char > 0)
                        start--;

                if ((start == 0) && (row->prev == NULL))
                        return E_REQUEST_DENIED;

                if (start == 0) {
                        row = row->prev;
                        if (row->length > 0)
                                start = row->length - 1;
                        else
                                start = 0;
                }

                str = row->string;

                start = find_sow(start, &row);
                
                if ((cur->rows + cur->nrows) == 1) {
                          /* single line field */
                        size = _formi_tab_expanded_length(str,
                                cur->start_char, start);
                        
                        if (start > cur->start_char) {
                                cur->row_xpos = start - cur->start_char;
                        } else {
                                cur->start_char = start;
                                cur->row_xpos = 0;
                        }
                        _formi_set_cursor_xpos(cur, FALSE);
                } else {
                          /* multiline field */
                        cur->cur_line = row;
                        adjust_ypos(cur, row);
                        cur->row_xpos = start;
                        cur->cursor_xpos =
                                _formi_tab_expanded_length(
                                        row->string, 0,
                                        cur->row_xpos) - 1;
                }
                
                break;

        case REQ_BEG_FIELD:
                cur->start_char = 0;
                while (cur->start_line->prev != NULL)
                        cur->start_line = cur->start_line->prev;
                cur->cur_line = cur->start_line;
                cur->row_xpos = 0;
                _formi_init_field_xpos(cur);
                cur->cursor_ypos = 0;
                break;
                
        case REQ_BEG_LINE:
                cur->row_xpos = 0;
                _formi_init_field_xpos(cur);
                cur->start_char = 0;
                break;
                        
        case REQ_END_FIELD:
                while (cur->cur_line->next != NULL)
                        cur->cur_line = cur->cur_line->next;
                
                if (cur->row_count > cur->rows) {
                        cur->start_line = cur->cur_line;
                        pos = cur->rows - 1;
                        while (pos > 0) {
                                cur->start_line = cur->start_line->prev;
                                pos--;
                        }
                        cur->cursor_ypos = cur->rows - 1;
                } else {
                        cur->cursor_ypos = cur->row_count - 1;
                }

                  /* we fall through here deliberately, we are on the
                   * correct row, now we need to get to the end of the
                   * line.
                   */
                  /* FALLTHRU */
                
        case REQ_END_LINE:
                row = cur->cur_line;

                if ((cur->rows + cur->nrows) == 1) {
                        if (row->expanded > cur->cols - 1) {
                                if ((cur->opts & O_STATIC) != O_STATIC) {
                                        cur->start_char = tab_fit_window(
                                                cur, row->length,
                                                cur->cols) + 1;
                                        cur->row_xpos = row->length
                                                - cur->start_char;
                                } else {
                                        cur->start_char = 0;
                                        cur->row_xpos = cur->cols - 1;
                                }
                        } else {
                                cur->row_xpos = row->length + 1;
                                cur->start_char = 0;
                        }
                        _formi_set_cursor_xpos(cur, FALSE);
                } else {
                        cur->row_xpos = row->length - 1;
                        cur->cursor_xpos = row->expanded - 1;
                        if (row->next == NULL) {
                                cur->row_xpos++;
                                cur->cursor_xpos++;
                        }
                }
                break;
                
        case REQ_NEW_LINE:
                start = cur->start_char + cur->row_xpos;
                if ((status = split_line(cur, TRUE, start, &row)) != E_OK)
                        return status;
                cur->cur_line->hard_ret = TRUE;
                cur->cursor_xpos = 0;
                cur->row_xpos = 0;
                break;
                
        case REQ_INS_CHAR:
                if ((status = _formi_add_char(cur, cur->start_char
                                              + cur->row_xpos,
                                              cur->pad)) != E_OK)
                        return status;
                break;
                
        case REQ_INS_LINE:
                if ((status = split_line(cur, TRUE, 0, &row)) != E_OK)
                        return status;
                cur->cur_line->hard_ret = TRUE;
                break;
                
        case REQ_DEL_CHAR:
                row = cur->cur_line;
                start = cur->start_char + cur->row_xpos;
                end = row->length - 1;
                if ((start >= row->length) && (row->next == NULL))
                        return E_REQUEST_DENIED;
                
                if ((start == row->length - 1) || (row->length == 0)) {
                        if ((cur->rows + cur->nrows) > 1) {
                                /*
                                 * Firstly, check if the current line has
                                 * a hard return.  In this case we just
                                 * want to "delete" the hard return and
                                 * re-wrap the field.  The hard return
                                 * does not occupy a character space in
                                 * the buffer but we must make it appear
                                 * like it does for a deletion.
                                 */
                                if (row->hard_ret == TRUE) {
                                        row->hard_ret = FALSE;
                                        if (_formi_join_line(cur, &row,
                                                             JOIN_NEXT)
                                            != E_OK) {
                                                row->hard_ret = TRUE;
                                                return 0;
                                        } else {
                                                return 1;
                                        }
                                }
                                        
                                /*
                                 * If we have more than one row, join the
                                 * next row to make things easier unless
                                 * we are at the end of the string, in
                                 * that case the join would fail but we
                                 * really want to delete the last char
                                 * in the field.
                                 */
                                if (row->next != NULL) {
                                        if (_formi_join_line(cur, &row,
                                                             JOIN_NEXT_NW)
                                            != E_OK) {
                                                return E_REQUEST_DENIED;
                                        }
                                }
                        }
                }
                        
                saved = row->string[start];
                memmove(&row->string[start], &row->string[start + 1],
                      (size_t) (end - start + 1));
                row->string[end] = '\0';
                row->length--;
                if (row->length > 0)
                        row->expanded = _formi_tab_expanded_length(
                                row->string, 0, row->length - 1);
                else
                        row->expanded = 0;

                  /*
                   * recalculate tabs for a single line field, multiline
                   * fields will do this when the field is wrapped.
                   */
                if ((cur->rows + cur->nrows) == 1)
                        _formi_calculate_tabs(row);
                  /*
                   * if we are at the end of the string then back the
                   * cursor pos up one to stick on the end of the line
                   */
                if (start == row->length) {
                        if (row->length > 1) {
                                if ((cur->rows + cur->nrows) == 1) {
                                        pos = cur->row_xpos + cur->start_char;
                                        cur->start_char =
                                                tab_fit_window(
                                                        cur,
                                                        cur->start_char + cur->row_xpos,
                                                        cur->cols);
                                        cur->row_xpos = pos - cur->start_char
                                                - 1;
                                        _formi_set_cursor_xpos(cur, FALSE);
                                } else {
                                        if (cur->row_xpos == 0) {
                                                if (row->next != NULL) {
                                                        if (_formi_join_line(
                                                                cur, &row,
                                                                JOIN_PREV_NW)
                                                            != E_OK) {
                                                                return E_REQUEST_DENIED;
                                                        }
                                                } else {
                                                        if (cur->row_count > 1)
                                                                cur->row_count--;
                                                }

                                        }
                                        
                                        cur->row_xpos = start - 1;
                                        cur->cursor_xpos =
                                                _formi_tab_expanded_length(
                                                        row->string,
                                                        0, cur->row_xpos - 1);
                                        if ((cur->cursor_xpos > 0)
                                            && (start != (row->expanded - 1)))
                                                cur->cursor_xpos--;
                                }
                                
                                start--;
                        } else {
                                start = 0;
                                cur->row_xpos = 0;
                                _formi_init_field_xpos(cur);
                        }
                }
                
                if ((cur->rows + cur->nrows) > 1) {
                        if (_formi_wrap_field(cur, row) != E_OK) {
                                memmove(&row->string[start + 1],
                                      &row->string[start],
                                      (size_t) (end - start));
                                row->length++;
                                row->string[start] = saved;
                                _formi_wrap_field(cur, row);
                                return E_REQUEST_DENIED;
                        }
                }
                break;
                        
        case REQ_DEL_PREV:
                if ((cur->cursor_xpos == 0) && (cur->start_char == 0)
                    && (cur->start_line->prev == NULL)
                    && (cur->cursor_ypos == 0))
                           return E_REQUEST_DENIED;

                row = cur->cur_line;
                start = cur->row_xpos + cur->start_char;
                end = row->length - 1;
                eat_char = TRUE;

                if ((cur->start_char + cur->row_xpos) == 0) {
                        if (row->prev == NULL)
                                return E_REQUEST_DENIED;

                          /*
                           * If we are a multiline field then check if
                           * the line above has a hard return.  If it does
                           * then just "eat" the hard return and re-wrap
                           * the field.
                           */
                        if (row->prev->hard_ret == TRUE) {
                                row->prev->hard_ret = FALSE;
                                if (_formi_join_line(cur, &row,
                                                     JOIN_PREV) != E_OK) {
                                        row->prev->hard_ret = TRUE;
                                        return 0;
                                }

                                eat_char = FALSE;
                        } else {
                                start = row->prev->length;
                                  /*
                                   * Join this line to the previous
                                   * one.
                                   */
                                if (_formi_join_line(cur, &row,
                                                     JOIN_PREV_NW) != E_OK) {
                                        return 0;
                                }
                                end = row->length - 1;
                        }
                }

                if (eat_char == TRUE) {
                          /*
                           * eat a char from the buffer.  Normally we do
                           * this unless we have deleted a "hard return"
                           * in which case we just want to join the lines
                           * without losing a char.
                           */
                        saved = row->string[start - 1];
                        memmove(&row->string[start - 1], &row->string[start],
                              (size_t) (end - start + 1));
                        row->length--;
                        row->string[row->length] = '\0';
                        row->expanded = _formi_tab_expanded_length(
                                row->string, 0, row->length - 1);
                }

                if ((cur->rows + cur->nrows) == 1) {
                        _formi_calculate_tabs(row);
                        pos = cur->row_xpos + cur->start_char;
                        if (pos > 0)
                                pos--;
                        cur->start_char =
                                tab_fit_window(cur,
                                               cur->start_char + cur->row_xpos,
                                               cur->cols);
                        cur->row_xpos = pos - cur->start_char;
                        _formi_set_cursor_xpos(cur, FALSE);
                } else {
                        if (eat_char == TRUE) {
                                cur->row_xpos--;
                                if (cur->row_xpos > 0)
                                        cur->cursor_xpos =
                                                _formi_tab_expanded_length(
                                                        row->string, 0,
                                                        cur->row_xpos - 1);
                                else
                                        cur->cursor_xpos = 0;
                        }
                        
                        if ((_formi_wrap_field(cur, row) != E_OK)) {
                                memmove(&row->string[start],
                                      &row->string[start - 1],
                                      (size_t) (end - start));
                                row->length++;
                                row->string[start - 1] = saved;
                                row->string[row->length] = '\0';
                                _formi_wrap_field(cur, row);
                                return E_REQUEST_DENIED;
                        }
                }
                break;
                        
        case REQ_DEL_LINE:
                if (((cur->rows + cur->nrows) == 1) ||
                    (cur->row_count == 1)) {
                          /* single line case */
                        row->length = 0;
                        row->expanded = row->length = 0;
                        cur->row_xpos = 0;
                        _formi_init_field_xpos(cur);
                        cur->cursor_ypos = 0;
                } else {
                          /* multiline field */
                        old_count = cur->row_count;
                        cur->row_count--;
                        if (cur->row_count == 0)
                                cur->row_count = 1;

                        if (old_count == 1) {
                                row->expanded = row->length = 0;
                                cur->cursor_xpos = 0;
                                cur->row_xpos = 0;
                                cur->cursor_ypos = 0;
                        } else
                                add_to_free(cur, row);
                        
                        if (row->next == NULL) {
                                if (cur->cursor_ypos == 0) {
                                        if (cur->start_line->prev != NULL) {
                                                cur->start_line =
                                                        cur->start_line->prev;
                                        }
                                } else {
                                        cur->cursor_ypos--;
                                }
                        }

                        if (old_count > 1) {
                                if (cur->cursor_xpos > row->expanded) {
                                        cur->cursor_xpos = row->expanded - 1;
                                        cur->row_xpos = row->length - 1;
                                }

                                cur->start_line = cur->alines;
                                rs = cur->start_line;
                                cur->cursor_ypos = 0;
                                while (rs != row) {
                                        if (cur->cursor_ypos < cur->rows)
                                                cur->cursor_ypos++;
                                        else
                                                cur->start_line =
                                                        cur->start_line->next;
                                        rs = rs->next;
                                }
                        } 
                }
                break;

        case REQ_DEL_WORD:
                start = cur->start_char + cur->row_xpos;
                str = row->string;

                wb = find_eow(cur, start, TRUE, &row);
                if (wb < 0)
                        return wb;

                end = wb;

                  /*
                   * If not at the start of a word then find the start,
                   * we cannot blindly call find_sow because this will
                   * skip back a word if we are already at the start of
                   * a word.
                   */
                if ((start > 0)
                    && !(isblank((unsigned char)str[start - 1]) &&
                        !isblank((unsigned char)str[start])))
                        start = find_sow(start, &row);
                str = row->string;
                  /* XXXX hmmmm what if start and end on diff rows? XXXX */
                memmove(&str[start], &str[end],
                      (size_t) (row->length - end + 1));
                len = end - start;
                row->length -= len;

                if ((cur->rows + cur->nrows) > 1) {
                        row = cur->start_line + cur->cursor_ypos;
                        if (row->next != NULL) {
                                /*
                                 * if not on the last row we need to
                                 * join on the next row so the line
                                 * will be re-wrapped.
                                 */
                                _formi_join_line(cur, &row, JOIN_NEXT_NW);
                        }
                        _formi_wrap_field(cur, row);
                        cur->row_xpos = start;
                        cur->cursor_xpos = _formi_tab_expanded_length(
                                row->string, 0, cur->row_xpos);
                        if (cur->cursor_xpos > 0)
                                cur->cursor_xpos--;
                } else {
                        _formi_calculate_tabs(row);
                        cur->row_xpos = start - cur->start_char;
                        if (cur->row_xpos > 0)
                                cur->row_xpos--;
                        _formi_set_cursor_xpos(cur, FALSE);
                }
                break;
                
        case REQ_CLR_EOL:
                row->string[cur->row_xpos + 1] = '\0';
                row->length = cur->row_xpos + 1;
                row->expanded = cur->cursor_xpos + 1;
                break;

        case REQ_CLR_EOF:
                row = cur->cur_line->next;
                while (row != NULL) {
                        rs = row->next;
                        add_to_free(cur, row);
                        row = rs;
                        cur->row_count--;
                }
                break;
                
        case REQ_CLR_FIELD:
                row = cur->alines->next;
                cur->cur_line = cur->alines;
                cur->start_line = cur->alines;
                
                while (row != NULL) {
                        rs = row->next;
                        add_to_free(cur, row);
                        row = rs;
                }

                cur->alines->string[0] = '\0';
                cur->alines->length = 0;
                cur->alines->expanded = 0;
                cur->row_count = 1;
                cur->cursor_ypos = 0;
                cur->row_xpos = 0;
                _formi_init_field_xpos(cur);
                cur->start_char = 0;
                break;
                
        case REQ_OVL_MODE:
                cur->overlay = 1;
                break;
                
        case REQ_INS_MODE:
                cur->overlay = 0;
                break;
                
        case REQ_SCR_FLINE:
                _formi_scroll_fwd(cur, 1);
                break;
                
        case REQ_SCR_BLINE:
                _formi_scroll_back(cur, 1);
                break;
                
        case REQ_SCR_FPAGE:
                _formi_scroll_fwd(cur, cur->rows);
                break;
                
        case REQ_SCR_BPAGE:
                _formi_scroll_back(cur, cur->rows);
                break;
                
        case REQ_SCR_FHPAGE:
                _formi_scroll_fwd(cur, cur->rows / 2);
                break;
                
        case REQ_SCR_BHPAGE:
                _formi_scroll_back(cur, cur->rows / 2);
                break;
                
        case REQ_SCR_FCHAR:
                _formi_hscroll_fwd(cur, row, 1);
                break;
                
        case REQ_SCR_BCHAR:
                _formi_hscroll_back(cur, row, 1);
                break;
                
        case REQ_SCR_HFLINE:
                _formi_hscroll_fwd(cur, row, cur->cols);
                break;
                
        case REQ_SCR_HBLINE:
                _formi_hscroll_back(cur, row, cur->cols);
                break;
                
        case REQ_SCR_HFHALF:
                _formi_hscroll_fwd(cur, row, cur->cols / 2);
                break;
                
        case REQ_SCR_HBHALF:
                _formi_hscroll_back(cur, row, cur->cols / 2);
                break;

        default:
                return 0;
        }
        
        _formi_dbg_printf(
             "%s: cursor_xpos=%d, row_xpos=%d, start_char=%d, length=%d, "
             "allocated=%d\n", __func__, cur->cursor_xpos, cur->row_xpos,
             cur->start_char, cur->cur_line->length, cur->cur_line->allocated);
        _formi_dbg_printf("%s: start_line=%p, ypos=%d\n", __func__,
            cur->start_line, cur->cursor_ypos);
        _formi_dbg_printf("%s: string=\"%s\"\n", __func__,
            cur->cur_line->string);
        assert ((cur->cursor_xpos < INT_MAX) && (cur->row_xpos < INT_MAX)
                && (cur->cursor_xpos >= cur->row_xpos));
        return 1;
}

/*
 * Validate the given character by passing it to any type character
 * checking routines, if they exist.
 */
int
_formi_validate_char(FIELD *field, char c)
{
        int ret_val;
        
        if (field->type == NULL)
                return E_OK;

        ret_val = E_INVALID_FIELD;
        _formi_do_char_validation(field, field->type, c, &ret_val);

        return ret_val;
}

                
/*
 * Perform the validation of the character, invoke all field_type validation
 * routines.  If the field is ok then update ret_val to E_OK otherwise
 * ret_val is not changed.
 */
static void
_formi_do_char_validation(FIELD *field, FIELDTYPE *type, char c, int *ret_val)
{
        if ((type->flags & _TYPE_IS_LINKED) == _TYPE_IS_LINKED) {
                _formi_do_char_validation(field, type->link->next, c, ret_val);
                _formi_do_char_validation(field, type->link->prev, c, ret_val);
        } else {
                if (type->char_check == NULL)
                        *ret_val = E_OK;
                else {
                        if (type->char_check((int)(unsigned char) c,
                                             field->args) == TRUE)
                                *ret_val = E_OK;
                }
        }
}

/*
 * Validate the current field.  If the field validation returns success then
 * return E_OK otherwise return E_INVALID_FIELD.
 *
 */
int
_formi_validate_field(FORM *form)
{
        FIELD *cur;
        int ret_val, count;
        

        if ((form == NULL) || (form->fields == NULL) ||
            (form->fields[0] == NULL))
                return E_INVALID_FIELD;

        cur = form->fields[form->cur_field];

          /*
           * Sync the buffer if it has been modified so the field
           * validation routines can use it and because this is
           * the correct behaviour according to AT&T implementation.
           */
        if ((cur->buf0_status == TRUE)
            && ((ret_val = _formi_sync_buffer(cur)) != E_OK))
                        return ret_val;

          /*
           * If buffer is untouched then the string pointer may be
           * NULL, see if this is ok or not.
           */
        if (cur->buffers[0].string == NULL) {
                if ((cur->opts & O_NULLOK) == O_NULLOK)
                        return E_OK;
                else
                        return E_INVALID_FIELD;
        }
        
        count = _formi_skip_blanks(cur->buffers[0].string, 0);

          /* check if we have a null field, depending on the nullok flag
           * this may be acceptable or not....
           */
        if (cur->buffers[0].string[count] == '\0') {
                if ((cur->opts & O_NULLOK) == O_NULLOK)
                        return E_OK;
                else
                        return E_INVALID_FIELD;
        }
        
          /* check if an unmodified field is ok */
        if (cur->buf0_status == 0) {
                if ((cur->opts & O_PASSOK) == O_PASSOK)
                        return E_OK;
                else
                        return E_INVALID_FIELD;
        }

          /* if there is no type then just accept the field */
        if (cur->type == NULL)
                return E_OK;

        ret_val = E_INVALID_FIELD;
        _formi_do_validation(cur, cur->type, &ret_val);
        
        return ret_val;
}

/*
 * Perform the validation of the field, invoke all field_type validation
 * routines.  If the field is ok then update ret_val to E_OK otherwise
 * ret_val is not changed.
 */
static void
_formi_do_validation(FIELD *field, FIELDTYPE *type, int *ret_val)
{
        if ((type->flags & _TYPE_IS_LINKED) == _TYPE_IS_LINKED) {
                _formi_do_validation(field, type->link->next, ret_val);
                _formi_do_validation(field, type->link->prev, ret_val);
        } else {
                if (type->field_check == NULL)
                        *ret_val = E_OK;
                else {
                        if (type->field_check(field, field_buffer(field, 0))
                            == TRUE)
                                *ret_val = E_OK;
                }
        }
}

/*
 * Select the next/previous choice for the field, the driver command
 * selecting the direction will be passed in c.  Return 1 if a choice
 * selection succeeded, 0 otherwise.
 */
int
_formi_field_choice(FORM *form, int c)
{
        FIELDTYPE *type;
        FIELD *field;
        
        if ((form == NULL) || (form->fields == NULL) ||
            (form->fields[0] == NULL) ||
            (form->fields[form->cur_field]->type == NULL))
                return 0;
        
        field = form->fields[form->cur_field];
        type = field->type;
        
        switch (c) {
        case REQ_NEXT_CHOICE:
                if (type->next_choice == NULL)
                        return 0;
                else
                        return type->next_choice(field,
                                                 field_buffer(field, 0));

        case REQ_PREV_CHOICE:
                if (type->prev_choice == NULL)
                        return 0;
                else
                        return type->prev_choice(field,
                                                 field_buffer(field, 0));

        default: /* should never happen! */
                return 0;
        }
}

/*
 * Update the fields if they have changed.  The parameter old has the
 * previous current field as the current field may have been updated by
 * the driver.  Return 1 if the form page needs updating.
 *
 */
int
_formi_update_field(FORM *form, int old_field)
{
        int cur, i;

        cur = form->cur_field;
        
        if (old_field != cur) {
                if (!((cur >= form->page_starts[form->page].first) &&
                      (cur <= form->page_starts[form->page].last))) {
                          /* not on same page any more */
                        for (i = 0; i < form->max_page; i++) {
                                if ((form->page_starts[i].in_use == 1) &&
                                    (form->page_starts[i].first <= cur) &&
                                    (form->page_starts[i].last >= cur)) {
                                        form->page = i;
                                        return 1;
                                }
                        }
                }
        }

        _formi_redraw_field(form, old_field);
        _formi_redraw_field(form, form->cur_field);
        return 0;
}

/*
 * Compare function for the field sorting
 *
 */
static int
field_sort_compare(const void *one, const void *two)
{
        const FIELD *a, *b;
        int tl;
        
        a = *(const FIELD **) __UNCONST(one);
        b = *(const FIELD **) __UNCONST(two);

        if (a == NULL)
                return 1;

        if (b == NULL)
                return -1;
        
          /*
           * First check the page, we want the fields sorted by page.
           *
           */
        if (a->page != b->page)
                return ((a->page > b->page)? 1 : -1);

        tl = _formi_top_left(a->parent, a->index, b->index);

          /*
           * sort fields left to right, top to bottom so the top left is
           * the lesser value....
           */
        return ((tl == a->index)? -1 : 1);
}
        
/*
 * Sort the fields in a form ready for driver traversal.
 */
void
_formi_sort_fields(FORM *form)
{
        FIELD **sort_area;
        int i;
        
        TAILQ_INIT(&form->sorted_fields);

        if ((sort_area = malloc(sizeof(*sort_area) * form->field_count))
            == NULL)
                return;

        memcpy(sort_area, form->fields, sizeof(*sort_area) * form->field_count);
        qsort(sort_area, (size_t) form->field_count, sizeof(FIELD *),
              field_sort_compare);
        
        for (i = 0; i < form->field_count; i++)
                TAILQ_INSERT_TAIL(&form->sorted_fields, sort_area[i], glue);

        free(sort_area);
}

/*
 * Set the neighbours for all the fields in the given form.
 */
void
_formi_stitch_fields(FORM *form)
{
        int above_row, below_row, end_above, end_below, cur_row, real_end;
        FIELD *cur, *above, *below;

          /*
           * check if the sorted fields circle queue is empty, just
           * return if it is.
           */
        if (TAILQ_EMPTY(&form->sorted_fields))
                return;
        
          /* initially nothing is above..... */
        above_row = -1;
        end_above = TRUE;
        above = NULL;

          /* set up the first field as the current... */
        cur = TAILQ_FIRST(&form->sorted_fields);
        cur_row = cur->form_row;
        
          /* find the first field on the next row if any */
        below = TAILQ_NEXT(cur, glue);
        below_row = -1;
        end_below = TRUE;
        real_end = TRUE;
        while (below != NULL) {
                if (below->form_row != cur_row) {
                        below_row = below->form_row;
                        end_below = FALSE;
                        real_end = FALSE;
                        break;
                }
                below = TAILQ_NEXT(below, glue);
        }

          /* walk the sorted fields, setting the neighbour pointers */
        while (cur != NULL) {
                if (cur == TAILQ_FIRST(&form->sorted_fields))
                        cur->left = NULL;
                else
                        cur->left = TAILQ_PREV(cur, _formi_sort_head, glue);

                if (cur == TAILQ_LAST(&form->sorted_fields, _formi_sort_head))
                        cur->right = NULL;
                else
                        cur->right = TAILQ_NEXT(cur, glue);

                if (end_above == TRUE)
                        cur->up = NULL;
                else {
                        cur->up = above;
                        above = TAILQ_NEXT(above, glue);
                        if (above_row != above->form_row) {
                                end_above = TRUE;
                                above_row = above->form_row;
                        }
                }

                if (end_below == TRUE)
                        cur->down = NULL;
                else {
                        cur->down = below;
                        below = TAILQ_NEXT(below, glue);
                        if (below == NULL) {
                                end_below = TRUE;
                                real_end = TRUE;
                        } else if (below_row != below->form_row) {
                                end_below = TRUE;
                                below_row = below->form_row;
                        }
                }

                cur = TAILQ_NEXT(cur, glue);
                if ((cur != NULL)
                    && (cur_row != cur->form_row)) {
                        cur_row = cur->form_row;
                        if (end_above == FALSE) {
                                for (; above !=
                                    TAILQ_FIRST(&form->sorted_fields);
                                    above = TAILQ_NEXT(above, glue)) {
                                        if (above->form_row != above_row) {
                                                above_row = above->form_row;
                                                break;
                                        }
                                }
                        } else if (above == NULL) {
                                above = TAILQ_FIRST(&form->sorted_fields);
                                end_above = FALSE;
                                above_row = above->form_row;
                        } else
                                end_above = FALSE;

                        if (end_below == FALSE) {
                                while (below_row == below->form_row) {
                                        below = TAILQ_NEXT(below, glue);
                                        if (below == NULL) {
                                                real_end = TRUE;
                                                end_below = TRUE;
                                                break;
                                        }
                                }

                                if (below != NULL)
                                        below_row = below->form_row;
                        } else if (real_end == FALSE)
                                end_below = FALSE;
                        
                }
        }
}

/*
 * Calculate the length of the displayed line allowing for any tab
 * characters that need to be expanded.  We assume that the tab stops
 * are 8 characters apart.  The parameters start and end are the
 * character positions in the string str we want to get the length of,
 * the function returns the number of characters from the start
 * position to the end position that should be displayed after any
 * intervening tabs have been expanded.
 */
int
_formi_tab_expanded_length(char *str, unsigned int start, unsigned int end)
{
        int len, start_len, i;

          /* if we have a null string then there is no length */
        if (str[0] == '\0')
                return 0;
        
        len = 0;
        start_len = 0;

          /*
           * preceding tabs affect the length tabs in the span, so
           * we need to calculate the length including the stuff before
           * start and then subtract off the unwanted bit.
           */
        for (i = 0; i <= end; i++) {
                if (i == start) /* stash preamble length for later */
                        start_len = len;

                if (str[i] == '\0')
                        break;
                
                if (str[i] == '\t')
                        len = len - (len % 8) + 8;
                else
                        len++;
        }

        _formi_dbg_printf(
            "%s: start=%d, end=%d, expanded=%d (diff=%d)\n", __func__,
            start, end, (len - start_len), (end - start));
        
        return (len - start_len);
}

/*
 * Calculate the tab stops on a given line in the field and set up
 * the tabs list with the results.  We do this by scanning the line for tab
 * characters and if one is found, noting the position and the number of
 * characters to get to the next tab stop.  This information is kept to
 * make manipulating the field (scrolling and so on) easier to handle.
 */
void
_formi_calculate_tabs(_FORMI_FIELD_LINES *row)
{
        _formi_tab_t *ts = row->tabs, *old_ts = NULL, **tsp;
        int i, j;

          /*
           * If the line already has tabs then invalidate them by
           * walking the list and killing the in_use flag.
           */
        for (; ts != NULL; ts = ts->fwd)
                ts->in_use = FALSE;


          /*
           * Now look for tabs in the row and record the info...
           */
        tsp = &row->tabs;
        for (i = 0, j = 0; i < row->length; i++, j++) {
                if (row->string[i] == '\t') {
                        if (*tsp == NULL) {
                                if ((*tsp = malloc(sizeof(**tsp))) == NULL)
                                        return;
                                (*tsp)->back = old_ts;
                                (*tsp)->fwd = NULL;
                        }
                        
                        (*tsp)->in_use = TRUE;
                        (*tsp)->pos = i;
                        (*tsp)->size = 8 - (j % 8);
                        j += (*tsp)->size - 1;
                        old_ts = *tsp;
                        tsp = &(*tsp)->fwd;
                }
        }
}

/*
 * Return the size of the tab padding for a tab character at the given
 * position.  Return 1 if there is not a tab char entry matching the
 * given location.
 */
static int
tab_size(_FORMI_FIELD_LINES *row, unsigned int i)
{
        _formi_tab_t *ts;

        ts = row->tabs;
        while ((ts != NULL) && (ts->pos != i))
                ts = ts->fwd;

        if (ts == NULL)
                return 1;
        else
                return ts->size;
}

/*
 * Find the character offset that corresponds to longest tab expanded
 * string that will fit into the given window.  Walk the string backwards
 * evaluating the sizes of any tabs that are in the string.  Note that
 * using this function on a multi-line window will produce undefined
 * results - it is really only required for a single row field.
 */
static int
tab_fit_window(FIELD *field, unsigned int pos, unsigned int window)
{
        int scroll_amt, i;
        _formi_tab_t *ts;
        
          /* first find the last tab */
        ts = field->alines->tabs;

          /*
           * unless there are no tabs - just return the window size,
           * if there is enough room, otherwise 0.
           */
        if (ts == NULL) {
                if (field->alines->length < window)
                        return 0;
                else
                        return field->alines->length - window + 1;
        }
                
        while ((ts->fwd != NULL) && (ts->fwd->in_use == TRUE))
                ts = ts->fwd;

          /*
           * now walk backwards finding the first tab that is to the
           * left of our starting pos.
           */
        while ((ts != NULL) && (ts->in_use == TRUE) && (ts->pos > pos))
                ts = ts->back;
        
        scroll_amt = 0;
        for (i = pos; i >= 0; i--) {
                if (field->alines->string[i] == '\t') {
                        assert((ts != NULL) && (ts->in_use == TRUE));
                        if (ts->pos == i) {
                                if ((scroll_amt + ts->size) > window) {
                                        break;
                                }
                                scroll_amt += ts->size;
                                ts = ts->back;
                        }
                        else
                                assert(ts->pos == i);
                } else {
                        scroll_amt++;
                        if (scroll_amt > window)
                                break;
                }
        }

        return ++i;
}

/*
 * Return the position of the last character that will fit into the
 * given width after tabs have been expanded for a given row of a given
 * field.
 */
static unsigned int
tab_fit_len(_FORMI_FIELD_LINES *row, unsigned int width)
{
        unsigned int pos, len, row_pos;
        _formi_tab_t *ts;

        ts = row->tabs;
        pos = 0;
        len = 0;
        row_pos = 0;

        if (width == 0)
                return 0;

        while ((len < width) && (pos < row->length)) {
                if (row->string[pos] == '\t') {
                        assert((ts != NULL) && (ts->in_use == TRUE));
                        if (ts->pos == row_pos) {
                                if ((len + ts->size) > width)
                                        break;
                                len += ts->size;
                                ts = ts->fwd;
                        }
                        else
                                assert(ts->pos == row_pos);
                } else
                        len++;
                pos++;
                row_pos++;
        }

        if (pos > 0)
                pos--;
        return pos;
}

/*
 * Sync the field line structures with the contents of buffer 0 for that
 * field.  We do this by walking all the line structures and concatenating
 * all the strings into one single string in buffer 0.
 */
int
_formi_sync_buffer(FIELD *field) 
{
        _FORMI_FIELD_LINES *line;
        char *nstr, *tmp;
        unsigned length;

        if (field->alines == NULL)
                return E_BAD_ARGUMENT;

        if (field->alines->string == NULL)
                return E_BAD_ARGUMENT;

          /*
           * init nstr up front, just in case there are no line contents,
           * this could happen if the field just contains hard returns.
           */
        if ((nstr = malloc(sizeof(*nstr))) == NULL)
                return E_SYSTEM_ERROR;
        nstr[0] = '\0';
        
        line = field->alines;
        length = 1; /* allow for terminating null */
        
        while (line != NULL) {
                if (line->length != 0) {
                        if ((tmp = realloc(nstr,
                                           (size_t) (length + line->length)))
                            == NULL) {
                                if (nstr != NULL)
                                        free(nstr);
                                return (E_SYSTEM_ERROR);
                        }

                        nstr = tmp;
                        strcat(nstr, line->string);
                        length += line->length;
                }

                line = line->next;
        }

        if (field->buffers[0].string != NULL)
                free(field->buffers[0].string);
        field->buffers[0].allocated = length;
        field->buffers[0].length = length - 1;
        field->buffers[0].string = nstr;
        return E_OK;
}