/*      $NetBSD: threadpool.c,v 1.6 2024/02/02 21:52:23 andvar Exp $    */

/*-
 * Copyright (c) 2018 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Jason R. Thorpe.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND
 * CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
 * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/cdefs.h>
#if !defined(lint)
__RCSID("$NetBSD: threadpool.c,v 1.6 2024/02/02 21:52:23 andvar Exp $");
#endif /* !lint */

#include <sys/param.h>
#include <sys/condvar.h>
#include <sys/kernel.h>
#include <sys/kmem.h>
#include <sys/mutex.h>
#include <sys/threadpool.h>

#include "kernspace.h"

void
rumptest_threadpool_unbound_lifecycle(void)
{
        struct threadpool *pool0, *pool1, *pool2;
        int error;

        error = threadpool_get(&pool0, PRI_NONE);
        KASSERT(error == 0);

        error = threadpool_get(&pool1, PRI_NONE);
        KASSERT(error == 0);

        KASSERT(pool0 == pool1);

        error = threadpool_get(&pool2, PRI_KERNEL_RT);
        KASSERT(error == 0);

        KASSERT(pool0 != pool2);

        threadpool_put(pool0, PRI_NONE);
        threadpool_put(pool1, PRI_NONE);
        threadpool_put(pool2, PRI_KERNEL_RT);
}

void
rumptest_threadpool_percpu_lifecycle(void)
{
        struct threadpool_percpu *pcpu0, *pcpu1, *pcpu2;
        int error;

        error = threadpool_percpu_get(&pcpu0, PRI_NONE);
        KASSERT(error == 0);

        error = threadpool_percpu_get(&pcpu1, PRI_NONE);
        KASSERT(error == 0);

        KASSERT(pcpu0 == pcpu1);

        error = threadpool_percpu_get(&pcpu2, PRI_KERNEL_RT);
        KASSERT(error == 0);

        KASSERT(pcpu0 != pcpu2);

        threadpool_percpu_put(pcpu0, PRI_NONE);
        threadpool_percpu_put(pcpu1, PRI_NONE);
        threadpool_percpu_put(pcpu2, PRI_KERNEL_RT);
}

struct test_job_data {
        kmutex_t mutex;
        kcondvar_t cond;
        unsigned int count;
        struct threadpool_job job;
};

#define FINAL_COUNT     12345

static void
test_job_func_schedule(struct threadpool_job *job)
{
        struct test_job_data *data =
            container_of(job, struct test_job_data, job);
        
        mutex_enter(&data->mutex);
        KASSERT(data->count != FINAL_COUNT);
        data->count++;
        cv_broadcast(&data->cond);
        threadpool_job_done(job);
        mutex_exit(&data->mutex);
}

static void
test_job_func_cancel(struct threadpool_job *job)
{
        struct test_job_data *data =
            container_of(job, struct test_job_data, job);

        mutex_enter(&data->mutex);
        if (data->count == 0) {
                data->count = 1;
                cv_broadcast(&data->cond);
        }
        while (data->count != FINAL_COUNT - 1)
                cv_wait(&data->cond, &data->mutex);
        data->count = FINAL_COUNT;
        cv_broadcast(&data->cond);
        threadpool_job_done(job);
        mutex_exit(&data->mutex);
}

static void
init_test_job_data(struct test_job_data *data, threadpool_job_fn_t fn)
{
        mutex_init(&data->mutex, MUTEX_DEFAULT, IPL_NONE);
        cv_init(&data->cond, "testjob");
        threadpool_job_init(&data->job, fn, &data->mutex, "testjob");
        data->count = 0;
}

static void
fini_test_job_data(struct test_job_data *data)
{
        threadpool_job_destroy(&data->job);
        cv_destroy(&data->cond);
        mutex_destroy(&data->mutex);
}

void
rumptest_threadpool_unbound_schedule(void)
{
        struct test_job_data data;
        struct threadpool *pool;
        int error;

        error = threadpool_get(&pool, PRI_NONE);
        KASSERT(error == 0);

        init_test_job_data(&data, test_job_func_schedule);

        mutex_enter(&data.mutex);
        while (data.count != FINAL_COUNT) {
                threadpool_schedule_job(pool, &data.job);
                error = cv_timedwait(&data.cond, &data.mutex, hz * 2);
                KASSERT(error != EWOULDBLOCK);
        }
        mutex_exit(&data.mutex);

        fini_test_job_data(&data);

        threadpool_put(pool, PRI_NONE);
}

void
rumptest_threadpool_percpu_schedule(void)
{
        struct test_job_data data;
        struct threadpool_percpu *pcpu;
        struct threadpool *pool;
        int error;

        error = threadpool_percpu_get(&pcpu, PRI_NONE);
        KASSERT(error == 0);

        pool = threadpool_percpu_ref(pcpu);

        init_test_job_data(&data, test_job_func_schedule);

        mutex_enter(&data.mutex);
        while (data.count != FINAL_COUNT) {
                threadpool_schedule_job(pool, &data.job);
                error = cv_timedwait(&data.cond, &data.mutex, hz * 2);
                KASSERT(error != EWOULDBLOCK);
        }
        mutex_exit(&data.mutex);

        fini_test_job_data(&data);

        threadpool_percpu_put(pcpu, PRI_NONE);
}

void
rumptest_threadpool_job_cancel(void)
{
        struct test_job_data data;
        struct threadpool *pool;
        int error;
        bool rv;

        error = threadpool_get(&pool, PRI_NONE);
        KASSERT(error == 0);

        init_test_job_data(&data, test_job_func_cancel);

        mutex_enter(&data.mutex);
        threadpool_schedule_job(pool, &data.job);
        while (data.count == 0)
                cv_wait(&data.cond, &data.mutex);
        KASSERT(data.count == 1);

        /* Job is already running (and is not finished); this should fail. */
        rv = threadpool_cancel_job_async(pool, &data.job);
        KASSERT(rv == false);

        data.count = FINAL_COUNT - 1;
        cv_broadcast(&data.cond);
        
        /* Now wait for the job to finish. */
        threadpool_cancel_job(pool, &data.job);
        KASSERT(data.count == FINAL_COUNT);
        mutex_exit(&data.mutex);

        fini_test_job_data(&data);

        threadpool_put(pool, PRI_NONE);
}

void
rumptest_threadpool_job_cancelthrash(void)
{
        struct test_job_data data;
        struct threadpool *pool;
        int i, error;

        error = threadpool_get(&pool, PRI_NONE);
        KASSERT(error == 0);

        init_test_job_data(&data, test_job_func_cancel);

        mutex_enter(&data.mutex);
        for (i = 0; i < 10000; i++) {
                threadpool_schedule_job(pool, &data.job);
                if ((i % 3) == 0) {
                        mutex_exit(&data.mutex);
                        mutex_enter(&data.mutex);
                }
                /*
                 * If the job managed to start, ensure that its exit
                 * condition is met so that we don't wait forever
                 * for the job to finish.
                 */
                data.count = FINAL_COUNT - 1;
                cv_broadcast(&data.cond);

                threadpool_cancel_job(pool, &data.job);

                /*
                 * After cancellation, either the job didn't start
                 * (data.count == FINAL_COUNT - 1, per above) or
                 * it finished (data.count == FINAL_COUNT).
                 */
                KASSERT(data.count == (FINAL_COUNT - 1) ||
                    data.count == FINAL_COUNT);

                /* Reset for the loop. */
                data.count = 0;
        }
        mutex_exit(&data.mutex);

        fini_test_job_data(&data);

        threadpool_put(pool, PRI_NONE);
}