__FUNCTION__
printf("%s: " str "\n", __FUNCTION__ , ## v)
DP("Done with %s\n", __FUNCTION__);
DP("Entering %s\n", __FUNCTION__);
DP("Done with %s\n", __FUNCTION__);
DP("Entering %s\n", __FUNCTION__);
panic("%s: unknown chip", __FUNCTION__);
panic("%s: %s is not supported", __FUNCTION__, at91_types[i].name);
panic("%s: cpu not recognized", __FUNCTION__);
printf("%s: configuring system...\n", __FUNCTION__);
printf("%s: returning new stack pointer 0x%lX\n", __FUNCTION__, (kernelstack.pv_va + USPACE_SVC_STACK_TOP));
panic("%s: at91bus_init() has not been called!", __FUNCTION__);
panic("%s: at91_init() has not been called!", __FUNCTION__);
DPRINTFN(2,("%s: other edge ignored\n", __FUNCTION__));
__FUNCTION__, i, sc->txq[i].m, sc->txqc));
DPRINTFN(2, ("%s: isr=0x%08X rsr=0x%08X imr=0x%08X\n", __FUNCTION__,
DPRINTFN(1,("%s: out of receive buffers\n", __FUNCTION__));
DPRINTFN(1,("%s: receive overrun\n", __FUNCTION__));
DPRINTFN(1,("%s: rbqlen=%i\n", __FUNCTION__, sc->rbqlen));
DPRINTFN(1,("%s: -> bus_dmamem_map\n", __FUNCTION__));
DPRINTFN(1,("%s: -> bus_dmamap_create\n", __FUNCTION__));
DPRINTFN(1,("%s: -> bus_dmamap_load\n", __FUNCTION__));
__FUNCTION__, err);
__FUNCTION__, err);
DPRINTFN(2,("%s: start sending idx #%i mbuf %p (txqc=%i, phys %p), len=%u\n", __FUNCTION__, bi, sc->txq[bi].m, sc->txqc, (void*)segs->ds_addr,
panic("%s: txqc %i > %i", __FUNCTION__, sc->txqc, TX_QLEN);
DPRINTFN(1,("%s: en0 %02x:%02x:%02x:%02x:%02x:%02x\n", __FUNCTION__,
__FUNCTION__,
__FUNCTION__,
__FUNCTION__,
__FUNCTION__, len, fifo->f_length, fifo->f_pdc_space, fifo->f_buf_size);
__FUNCTION__, fifo->f_length, fifo->f_pdc_space, fifo->f_buf_size);
panic("%s: perab is invalid: %i", __FUNCTION__, perab);
panic("%s: isr is zero (0x%X)", __FUNCTION__, isr);
panic("%s: pid %d out of range", __FUNCTION__, pid);
__FUNCTION__, pid, pid_enable_count[pid]);
panic("%s: main oscillator not enabled (MOR=%#X)", __FUNCTION__, reg);
panic("%s: main oscillator not ready (MCFR=%#X)", __FUNCTION__, reg);
default: panic("%s: invalid pid %d", __FUNCTION__, pid);
default: panic("%s: pid %d not valid", __FUNCTION__, pid);
default: panic("%s: invalid pid %d", __FUNCTION__, pid);
default: panic("%s: pid %d not valid", __FUNCTION__, pid);
default: panic("%s: invalid pid %d", __FUNCTION__, pid);
default: panic("%s: pid %d not valid", __FUNCTION__, pid);
__FUNCTION__, slave, mode, speed, csr));
DPRINTFN(3, ("%s: sc=%p start=%d\n", __FUNCTION__, sc, start));
DPRINTFN(3, ("%s: sc=%p start=%d sr=%"PRIX32"\n", __FUNCTION__, sc, start, sr));
DPRINTFN(3, ("%s: sr=%"PRIX32"\n", __FUNCTION__, sr));
__FUNCTION__, sc->sc_dmaoffs, len, sc->sc_wchunk,
DPRINTFN(3, ("%s: nothing to write anymore\n", __FUNCTION__));
DPRINTFN(2, ("%s: st=%p\n", __FUNCTION__, st));
DPRINTFN(2, ("%s: nothing to do anymore\n", __FUNCTION__));
DPRINTFN(2, ("%s: st %p finished with error code %d\n", __FUNCTION__, st, err));
DPRINTFN(4, ("%s: interrupts are not enabled\n", __FUNCTION__));
__FUNCTION__, sr, imr));
__FUNCTION__, sr, imr));
DPRINTF("%s: done\n", __FUNCTION__);
panic("%s: driver has not been initialized! (sc=%p)", __FUNCTION__, sc);
DPRINTF("%s: done, tclock=%"PRIu32" div=%"PRIu32" uspertick=%"PRIu32"\n", __FUNCTION__, sc->sc_timerclock, sc->sc_divider, sc->sc_usec_per_tick);
panic("%s: driver has not been initialized! (sc=%p)", __FUNCTION__, sc);
panic("%s: Cannot calculate clock divider!", __FUNCTION__);
printf("%s(%s): FAILED (sr=%08X)\n", __FUNCTION__,
printf("%s(%s): SUCCESS (sr=%08X)\n", __FUNCTION__,
DPRINTFN(5, ("%s: %s / csr = 0x%08x\n", device_xname(sc->sc_dev), __FUNCTION__, csr));
DPRINTFN(5, ("%s: %s / COM_ISALIVE == 0\n", device_xname(sc->sc_dev), __FUNCTION__));
DPRINTFN(5, ("%s: %s: TS_BUSY || TS_TIMEOUT || TS_TTSTOP\n", device_xname(sc->sc_dev), __FUNCTION__));
DPRINTFN(5, ("%s: %s, ier=%08x (csr=%08x)\n", device_xname(sc->sc_dev), __FUNCTION__, sc->sc_ier, at91usart_readreg(sc, US_CSR)));
panic("%s: unknown is_type %d\n", __FUNCTION__, is->is_type);
DPRINTFN(1, ("%s:%d: %d %d %ld %p %p %p\n", __FUNCTION__, __LINE__,
__FUNCTION__, ix_read, ix_write));
__FUNCTION__, __LINE__, descp, ndesc, descp->tag));
__FUNCTION__, __LINE__, dst, ba, len));
DPRINTFN(2, ("%s: %p %p\n", __FUNCTION__, desc_dst, desc_src));
DPRINTFN(2, ("%s: %p %p\n", __FUNCTION__, desc_dst, desc_src));
printf("%s: bad irq %d\n", __FUNCTION__, irq);
printf("%s: enter\n", __FUNCTION__);
printf("%s: exit\n", __FUNCTION__);
printf("%s: timer# %d\n", __FUNCTION__, n);
printf("%s: %p\n", __FUNCTION__, gd);
panic("%s: driver has not been initialized!", __FUNCTION__);
printf("%s:%d: pmap_link_l2pt ipmq_pt\n", __FUNCTION__, __LINE__);
__FUNCTION__, r, MEMSIZE);
__FUNCTION__, r, MEMSIZE);
__FUNCTION__, r, MEMSIZE);
panic("%s: at91bus_init() failed", __FUNCTION__);
panic("%s: processor is not AT91SAM9260", __FUNCTION__);
panic("%s: at91bus_init() failed", __FUNCTION__);
panic("%s: processor is not AT91RM9200", __FUNCTION__);
({ printf("%s: can't read 8bytes from I/O space\n", __FUNCTION__); 0;}) : \
__FUNCTION__); \
__FUNCTION__); \
printf("%s: can't write 8bytes to I/O space\n", __FUNCTION__); : \
printf("%s: can't write 8bytes to I/O space\n", __FUNCTION__);\
printf("%s: can't write 8bytes to I/O space\n", __FUNCTION__);\
printf("%s: can't write 8bytes to I/O space\n", __FUNCTION__);
printf("%s: can't write 8bytes to I/O space\n", __FUNCTION__);
printf("%s: can't write 8bytes to I/O space\n", __FUNCTION__);
printf("%s: Unknown barrier %d\n", __FUNCTION__, flags);
RALINK_DEBUG(RALINK_DEBUG_FUNC, "%s() entry\n", __FUNCTION__)
RALINK_DEBUG(RALINK_DEBUG_FUNC, "%s() exit\n", __FUNCTION__)
panic("%s: not verified yet", __FUNCTION__);
__FUNCTION__, capacity, sc->sc_vdisk_block_size));
__FUNCTION__, capacity, sc->sc_vdisk_block_size));
panic("%s: not verified yet", __FUNCTION__);
panic("%s: not verified yet", __FUNCTION__);
DPRINTFN(1,("%s: en0 %02x:%02x:%02x:%02x:%02x:%02x\n", __FUNCTION__,
__FUNCTION__,
__FUNCTION__,
__FUNCTION__,
__FUNCTION__, bi, sc->TDSC[bi].Addr));
__FUNCTION__, bi, sc->TDSC[bi].Info));
__FUNCTION__, bi, sc->txq[bi].m, sc->txqc));
DPRINTFN(2, ("%s: isr=0x%08X rsr=0x%08X imr=0x%08X\n", __FUNCTION__,
DPRINTFN(1,("%s: out of receive buffers\n", __FUNCTION__));
DPRINTFN(1,("%s: receive overrun\n", __FUNCTION__));
DPRINTFN(1,("%s: rbqlen=%i\n", __FUNCTION__, sc->rbqlen));
DPRINTFN(1,("%s: -> bus_dmamem_map\n", __FUNCTION__));
DPRINTFN(1,("%s: -> bus_dmamap_create\n", __FUNCTION__));
DPRINTFN(1,("%s: -> bus_dmamap_load\n", __FUNCTION__));
DPRINTFN(1,("%s: tbqlen=%i\n", __FUNCTION__, sc->tbqlen));
DPRINTFN(1,("%s: -> bus_dmamem_map\n", __FUNCTION__));
DPRINTFN(1,("%s: -> bus_dmamap_create\n", __FUNCTION__));
DPRINTFN(1,("%s: -> bus_dmamap_load\n", __FUNCTION__));
panic("%s: dmamap_create failed: %i\n", __FUNCTION__,
panic("%s: dmamap_load failed: %i\n", __FUNCTION__, err);
"len=%u\n", __FUNCTION__, bi, sc->txq[bi].m, sc->txqc,
panic("%s: txqc %i > %i", __FUNCTION__, sc->txqc, TX_QLEN);
__FUNCTION__, bi, sc->TDSC[bi].Addr));
__FUNCTION__, bi, sc->TDSC[bi].Info));
DPRINTFN(3,("%s: ETH_CTL 0x%08x\n", __FUNCTION__,
#define __func__ __FUNCTION__
" %s: " fmt, __FUNCTION__ , ##__VA_ARGS__); \
return __FUNCTION__;
println(__FUNCTION__);