root/sound/pci/lx6464es/lx_defs.h
/* SPDX-License-Identifier: GPL-2.0-or-later */
/* -*- linux-c -*- *
 *
 * ALSA driver for the digigram lx6464es interface
 * adapted upstream headers
 *
 * Copyright (c) 2009 Tim Blechmann <tim@klingt.org>
 */

#ifndef LX_DEFS_H
#define LX_DEFS_H

/* code adapted from ethersound.h */
#define XES_FREQ_COUNT8_MASK    0x00001FFF /* compteur 25MHz entre 8 ech. */
#define XES_FREQ_COUNT8_44_MIN  0x00001288 /* 25M /
                                            * [ 44k - ( 44.1k + 48k ) / 2 ]
                                            * * 8 */
#define XES_FREQ_COUNT8_44_MAX  0x000010F0 /* 25M / [ ( 44.1k + 48k ) / 2 ]
                                            * * 8 */
#define XES_FREQ_COUNT8_48_MAX  0x00000F08 /* 25M /
                                            * [ 48k + ( 44.1k + 48k ) / 2 ]
                                            * * 8 */

/* code adapted from LXES_registers.h */

#define IOCR_OUTPUTS_OFFSET 0   /* (rw) offset for the number of OUTs in the
                                 * ConfES register. */
#define IOCR_INPUTS_OFFSET  8   /* (rw) offset for the number of INs in the
                                 * ConfES register. */
#define FREQ_RATIO_OFFSET  19   /* (rw) offset for frequency ratio in the
                                 * ConfES register. */
#define FREQ_RATIO_SINGLE_MODE 0x01 /* value for single mode frequency ratio:
                                     * sample rate = frequency rate. */

#define CONFES_READ_PART_MASK   0x00070000
#define CONFES_WRITE_PART_MASK  0x00F80000

/* code adapted from if_drv_mb.h */

#define MASK_SYS_STATUS_ERROR   (1L << 31) /* events that lead to a PCI irq if
                                            * not yet pending */
#define MASK_SYS_STATUS_URUN    (1L << 30)
#define MASK_SYS_STATUS_ORUN    (1L << 29)
#define MASK_SYS_STATUS_EOBO    (1L << 28)
#define MASK_SYS_STATUS_EOBI    (1L << 27)
#define MASK_SYS_STATUS_FREQ    (1L << 26)
#define MASK_SYS_STATUS_ESA     (1L << 25) /* reserved, this is set by the
                                            * XES */
#define MASK_SYS_STATUS_TIMER   (1L << 24)

#define MASK_SYS_ASYNC_EVENTS   (MASK_SYS_STATUS_ERROR |                \
                                 MASK_SYS_STATUS_URUN  |                \
                                 MASK_SYS_STATUS_ORUN  |                \
                                 MASK_SYS_STATUS_EOBO  |                \
                                 MASK_SYS_STATUS_EOBI  |                \
                                 MASK_SYS_STATUS_FREQ  |                \
                                 MASK_SYS_STATUS_ESA)

#define MASK_SYS_PCI_EVENTS             (MASK_SYS_ASYNC_EVENTS |        \
                                         MASK_SYS_STATUS_TIMER)

#define MASK_SYS_TIMER_COUNT    0x0000FFFF

#define MASK_SYS_STATUS_EOT_PLX         (1L << 22) /* event that remains
                                                    * internal: reserved fo end
                                                    * of plx dma */
#define MASK_SYS_STATUS_XES             (1L << 21) /* event that remains
                                                    * internal: pending XES
                                                    * IRQ */
#define MASK_SYS_STATUS_CMD_DONE        (1L << 20) /* alternate command
                                                    * management: notify driver
                                                    * instead of polling */


#define MAX_STREAM_BUFFER 5     /* max amount of stream buffers. */

#define MICROBLAZE_IBL_MIN               32
#define MICROBLAZE_IBL_DEFAULT          128
#define MICROBLAZE_IBL_MAX              512
/* #define MASK_GRANULARITY             (2*MICROBLAZE_IBL_MAX-1) */



/* command opcodes, see reference for details */

/*
 the capture bit position in the object_id field in driver commands
 depends upon the number of managed channels. For now, 64 IN + 64 OUT are
 supported. HOwever, the communication protocol forsees 1024 channels, hence
 bit 10 indicates a capture (input) object).
*/
#define ID_IS_CAPTURE (1L << 10)
#define ID_OFFSET       13      /* object ID is at the 13th bit in the
                                 * 1st command word.*/
#define ID_CH_MASK    0x3F
#define OPCODE_OFFSET   24      /* offset of the command opcode in the first
                                 * command word.*/

enum cmd_mb_opcodes {
        CMD_00_INFO_DEBUG               = 0x00,
        CMD_01_GET_SYS_CFG              = 0x01,
        CMD_02_SET_GRANULARITY          = 0x02,
        CMD_03_SET_TIMER_IRQ            = 0x03,
        CMD_04_GET_EVENT                = 0x04,
        CMD_05_GET_PIPES                = 0x05,

        CMD_06_ALLOCATE_PIPE            = 0x06,
        CMD_07_RELEASE_PIPE             = 0x07,
        CMD_08_ASK_BUFFERS              = 0x08,
        CMD_09_STOP_PIPE                = 0x09,
        CMD_0A_GET_PIPE_SPL_COUNT       = 0x0a,
        CMD_0B_TOGGLE_PIPE_STATE        = 0x0b,

        CMD_0C_DEF_STREAM               = 0x0c,
        CMD_0D_SET_MUTE                 = 0x0d,
        CMD_0E_GET_STREAM_SPL_COUNT     = 0x0e,
        CMD_0F_UPDATE_BUFFER            = 0x0f,
        CMD_10_GET_BUFFER               = 0x10,
        CMD_11_CANCEL_BUFFER            = 0x11,
        CMD_12_GET_PEAK                 = 0x12,
        CMD_13_SET_STREAM_STATE         = 0x13,
        CMD_14_INVALID                  = 0x14,
};

/* pipe states */
enum pipe_state_t {
        PSTATE_IDLE     = 0,    /* the pipe is not processed in the XES_IRQ
                                 * (free or stopped, or paused). */
        PSTATE_RUN      = 1,    /* sustained play/record state. */
        PSTATE_PURGE    = 2,    /* the ES channels are now off, render pipes do
                                 * not DMA, record pipe do a last DMA. */
        PSTATE_ACQUIRE  = 3,    /* the ES channels are now on, render pipes do
                                 * not yet increase their sample count, record
                                 * pipes do not DMA. */
        PSTATE_CLOSING  = 4,    /* the pipe is releasing, and may not yet
                                 * receive an "alloc" command. */
};

/* stream states */
enum stream_state_t {
        SSTATE_STOP     =  0x00,       /* setting to stop resets the stream spl
                                        * count.*/
        SSTATE_RUN      = (0x01 << 0), /* start DMA and spl count handling. */
        SSTATE_PAUSE    = (0x01 << 1), /* pause DMA and spl count handling. */
};

/* buffer flags */
enum buffer_flags {
        BF_VALID        = 0x80, /* set if the buffer is valid, clear if free.*/
        BF_CURRENT      = 0x40, /* set if this is the current buffer (there is
                                 * always a current buffer).*/
        BF_NOTIFY_EOB   = 0x20, /* set if this buffer must cause a PCI event
                                 * when finished.*/
        BF_CIRCULAR     = 0x10, /* set if buffer[1] must be copied to buffer[0]
                                 * by the end of this buffer.*/
        BF_64BITS_ADR   = 0x08, /* set if the hi part of the address is valid.*/
        BF_xx           = 0x04, /* future extension.*/
        BF_EOB          = 0x02, /* set if finished, but not yet free.*/
        BF_PAUSE        = 0x01, /* pause stream at buffer end.*/
        BF_ZERO         = 0x00, /* no flags (init).*/
};

/*
*       Stream Flags definitions
*/
enum stream_flags {
        SF_ZERO         = 0x00000000, /* no flags (stream invalid). */
        SF_VALID        = 0x10000000, /* the stream has a valid DMA_conf
                                       * info (setstreamformat). */
        SF_XRUN         = 0x20000000, /* the stream is un x-run state. */
        SF_START        = 0x40000000, /* the DMA is running.*/
        SF_ASIO         = 0x80000000, /* ASIO.*/
};


#define MASK_SPL_COUNT_HI 0x00FFFFFF /* 4 MSBits are status bits */
#define PSTATE_OFFSET             28 /* 4 MSBits are status bits */


#define MASK_STREAM_HAS_MAPPING (1L << 12)
#define MASK_STREAM_IS_ASIO     (1L <<  9)
#define STREAM_FMT_OFFSET       10   /* the stream fmt bits start at the 10th
                                      * bit in the command word. */

#define STREAM_FMT_16b          0x02
#define STREAM_FMT_intel        0x01

#define FREQ_FIELD_OFFSET       15  /* offset of the freq field in the response
                                     * word */

#define BUFF_FLAGS_OFFSET         24 /*  offset of the buffer flags in the
                                      *  response word. */
#define MASK_DATA_SIZE    0x00FFFFFF /* this must match the field size of
                                      * datasize in the buffer_t structure. */

#define MASK_BUFFER_ID          0xFF /* the cancel command awaits a buffer ID,
                                      * may be 0xFF for "current". */


/* code adapted from PcxErr_e.h */

/* Bits masks */

#define ERROR_MASK              0x8000

#define SOURCE_MASK             0x7800

#define E_SOURCE_BOARD          0x4000 /* 8 >> 1 */
#define E_SOURCE_DRV            0x2000 /* 4 >> 1 */
#define E_SOURCE_API            0x1000 /* 2 >> 1 */
/* Error tools */
#define E_SOURCE_TOOLS          0x0800 /* 1 >> 1 */
/* Error pcxaudio */
#define E_SOURCE_AUDIO          0x1800 /* 3 >> 1 */
/* Error virtual pcx */
#define E_SOURCE_VPCX           0x2800 /* 5 >> 1 */
/* Error dispatcher */
#define E_SOURCE_DISPATCHER     0x3000 /* 6 >> 1 */
/* Error from CobraNet firmware */
#define E_SOURCE_COBRANET       0x3800 /* 7 >> 1 */

#define E_SOURCE_USER           0x7800

#define CLASS_MASK              0x0700

#define CODE_MASK               0x00FF

/* Bits values */

/* Values for the error/warning bit */
#define ERROR_VALUE             0x8000
#define WARNING_VALUE           0x0000

/* Class values */
#define E_CLASS_GENERAL                  0x0000
#define E_CLASS_INVALID_CMD              0x0100
#define E_CLASS_INVALID_STD_OBJECT       0x0200
#define E_CLASS_RSRC_IMPOSSIBLE          0x0300
#define E_CLASS_WRONG_CONTEXT            0x0400
#define E_CLASS_BAD_SPECIFIC_PARAMETER   0x0500
#define E_CLASS_REAL_TIME_ERROR          0x0600
#define E_CLASS_DIRECTSHOW               0x0700
#define E_CLASS_FREE                     0x0700


/* Complete DRV error code for the general class */
#define ED_GN           (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_GENERAL)
#define ED_CONCURRENCY                  (ED_GN | 0x01)
#define ED_DSP_CRASHED                  (ED_GN | 0x02)
#define ED_UNKNOWN_BOARD                (ED_GN | 0x03)
#define ED_NOT_INSTALLED                (ED_GN | 0x04)
#define ED_CANNOT_OPEN_SVC_MANAGER      (ED_GN | 0x05)
#define ED_CANNOT_READ_REGISTRY         (ED_GN | 0x06)
#define ED_DSP_VERSION_MISMATCH         (ED_GN | 0x07)
#define ED_UNAVAILABLE_FEATURE          (ED_GN | 0x08)
#define ED_CANCELLED                    (ED_GN | 0x09)
#define ED_NO_RESPONSE_AT_IRQA          (ED_GN | 0x10)
#define ED_INVALID_ADDRESS              (ED_GN | 0x11)
#define ED_DSP_CORRUPTED                (ED_GN | 0x12)
#define ED_PENDING_OPERATION            (ED_GN | 0x13)
#define ED_NET_ALLOCATE_MEMORY_IMPOSSIBLE   (ED_GN | 0x14)
#define ED_NET_REGISTER_ERROR               (ED_GN | 0x15)
#define ED_NET_THREAD_ERROR                 (ED_GN | 0x16)
#define ED_NET_OPEN_ERROR                   (ED_GN | 0x17)
#define ED_NET_CLOSE_ERROR                  (ED_GN | 0x18)
#define ED_NET_NO_MORE_PACKET               (ED_GN | 0x19)
#define ED_NET_NO_MORE_BUFFER               (ED_GN | 0x1A)
#define ED_NET_SEND_ERROR                   (ED_GN | 0x1B)
#define ED_NET_RECEIVE_ERROR                (ED_GN | 0x1C)
#define ED_NET_WRONG_MSG_SIZE               (ED_GN | 0x1D)
#define ED_NET_WAIT_ERROR                   (ED_GN | 0x1E)
#define ED_NET_EEPROM_ERROR                 (ED_GN | 0x1F)
#define ED_INVALID_RS232_COM_NUMBER         (ED_GN | 0x20)
#define ED_INVALID_RS232_INIT               (ED_GN | 0x21)
#define ED_FILE_ERROR                       (ED_GN | 0x22)
#define ED_INVALID_GPIO_CMD                 (ED_GN | 0x23)
#define ED_RS232_ALREADY_OPENED             (ED_GN | 0x24)
#define ED_RS232_NOT_OPENED                 (ED_GN | 0x25)
#define ED_GPIO_ALREADY_OPENED              (ED_GN | 0x26)
#define ED_GPIO_NOT_OPENED                  (ED_GN | 0x27)
#define ED_REGISTRY_ERROR                   (ED_GN | 0x28) /* <- NCX */
#define ED_INVALID_SERVICE                  (ED_GN | 0x29) /* <- NCX */

#define ED_READ_FILE_ALREADY_OPENED         (ED_GN | 0x2a) /* <- Decalage
                                                            * pour RCX
                                                            * (old 0x28)
                                                            * */
#define ED_READ_FILE_INVALID_COMMAND        (ED_GN | 0x2b) /* ~ */
#define ED_READ_FILE_INVALID_PARAMETER      (ED_GN | 0x2c) /* ~ */
#define ED_READ_FILE_ALREADY_CLOSED         (ED_GN | 0x2d) /* ~ */
#define ED_READ_FILE_NO_INFORMATION         (ED_GN | 0x2e) /* ~ */
#define ED_READ_FILE_INVALID_HANDLE         (ED_GN | 0x2f) /* ~ */
#define ED_READ_FILE_END_OF_FILE            (ED_GN | 0x30) /* ~ */
#define ED_READ_FILE_ERROR                  (ED_GN | 0x31) /* ~ */

#define ED_DSP_CRASHED_EXC_DSPSTACK_OVERFLOW (ED_GN | 0x32) /* <- Decalage pour
                                                             * PCX (old 0x14) */
#define ED_DSP_CRASHED_EXC_SYSSTACK_OVERFLOW (ED_GN | 0x33) /* ~ */
#define ED_DSP_CRASHED_EXC_ILLEGAL           (ED_GN | 0x34) /* ~ */
#define ED_DSP_CRASHED_EXC_TIMER_REENTRY     (ED_GN | 0x35) /* ~ */
#define ED_DSP_CRASHED_EXC_FATAL_ERROR       (ED_GN | 0x36) /* ~ */

#define ED_FLASH_PCCARD_NOT_PRESENT          (ED_GN | 0x37)

#define ED_NO_CURRENT_CLOCK                  (ED_GN | 0x38)

/* Complete DRV error code for real time class */
#define ED_RT           (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_REAL_TIME_ERROR)
#define ED_DSP_TIMED_OUT                (ED_RT | 0x01)
#define ED_DSP_CHK_TIMED_OUT            (ED_RT | 0x02)
#define ED_STREAM_OVERRUN               (ED_RT | 0x03)
#define ED_DSP_BUSY                     (ED_RT | 0x04)
#define ED_DSP_SEMAPHORE_TIME_OUT       (ED_RT | 0x05)
#define ED_BOARD_TIME_OUT               (ED_RT | 0x06)
#define ED_XILINX_ERROR                 (ED_RT | 0x07)
#define ED_COBRANET_ITF_NOT_RESPONDING  (ED_RT | 0x08)

/* Complete BOARD error code for the invaid standard object class */
#define EB_ISO          (ERROR_VALUE | E_SOURCE_BOARD | \
                         E_CLASS_INVALID_STD_OBJECT)
#define EB_INVALID_EFFECT               (EB_ISO | 0x00)
#define EB_INVALID_PIPE                 (EB_ISO | 0x40)
#define EB_INVALID_STREAM               (EB_ISO | 0x80)
#define EB_INVALID_AUDIO                (EB_ISO | 0xC0)

/* Complete BOARD error code for impossible resource allocation class */
#define EB_RI           (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_RSRC_IMPOSSIBLE)
#define EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE (EB_RI | 0x01)
#define EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE           (EB_RI | 0x02)

#define EB_ALLOCATE_MEM_STREAM_IMPOSSIBLE               \
        EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE
#define EB_ALLOCATE_MEM_PIPE_IMPOSSIBLE                 \
        EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE

#define EB_ALLOCATE_DIFFERED_CMD_IMPOSSIBLE     (EB_RI | 0x03)
#define EB_TOO_MANY_DIFFERED_CMD                (EB_RI | 0x04)
#define EB_RBUFFERS_TABLE_OVERFLOW              (EB_RI | 0x05)
#define EB_ALLOCATE_EFFECTS_IMPOSSIBLE          (EB_RI | 0x08)
#define EB_ALLOCATE_EFFECT_POS_IMPOSSIBLE       (EB_RI | 0x09)
#define EB_RBUFFER_NOT_AVAILABLE                (EB_RI | 0x0A)
#define EB_ALLOCATE_CONTEXT_LIII_IMPOSSIBLE     (EB_RI | 0x0B)
#define EB_STATUS_DIALOG_IMPOSSIBLE             (EB_RI | 0x1D)
#define EB_CONTROL_CMD_IMPOSSIBLE               (EB_RI | 0x1E)
#define EB_STATUS_SEND_IMPOSSIBLE               (EB_RI | 0x1F)
#define EB_ALLOCATE_PIPE_IMPOSSIBLE             (EB_RI | 0x40)
#define EB_ALLOCATE_STREAM_IMPOSSIBLE           (EB_RI | 0x80)
#define EB_ALLOCATE_AUDIO_IMPOSSIBLE            (EB_RI | 0xC0)

/* Complete BOARD error code for wrong call context class */
#define EB_WCC          (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_WRONG_CONTEXT)
#define EB_CMD_REFUSED                  (EB_WCC | 0x00)
#define EB_START_STREAM_REFUSED         (EB_WCC | 0xFC)
#define EB_SPC_REFUSED                  (EB_WCC | 0xFD)
#define EB_CSN_REFUSED                  (EB_WCC | 0xFE)
#define EB_CSE_REFUSED                  (EB_WCC | 0xFF)




#endif /* LX_DEFS_H */