// SPDX-License-Identifier: GPL-2.0-only
/*
 *  ALSA driver for Echoaudio soundcards.
 *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
 */

#define ECHO3G_FAMILY
#define ECHOCARD_ECHO3G
#define ECHOCARD_NAME "Echo3G"
#define ECHOCARD_HAS_MONITOR
#define ECHOCARD_HAS_ASIC
#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
#define ECHOCARD_HAS_SUPER_INTERLEAVE
#define ECHOCARD_HAS_DIGITAL_IO
#define ECHOCARD_HAS_DIGITAL_MODE_SWITCH
#define ECHOCARD_HAS_ADAT       6
#define ECHOCARD_HAS_EXTERNAL_CLOCK
#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
#define ECHOCARD_HAS_MIDI
#define ECHOCARD_HAS_PHANTOM_POWER

/* Pipe indexes */
#define PX_ANALOG_OUT   0
#define PX_DIGITAL_OUT  chip->px_digital_out
#define PX_ANALOG_IN    chip->px_analog_in
#define PX_DIGITAL_IN   chip->px_digital_in
#define PX_NUM          chip->px_num

/* Bus indexes */
#define BX_ANALOG_OUT   0
#define BX_DIGITAL_OUT  chip->bx_digital_out
#define BX_ANALOG_IN    chip->bx_analog_in
#define BX_DIGITAL_IN   chip->bx_digital_in
#define BX_NUM          chip->bx_num


#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <sound/tlv.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/asoundef.h>
#include <sound/initval.h>
#include <sound/rawmidi.h>
#include <linux/atomic.h>
#include "echoaudio.h"

MODULE_FIRMWARE("ea/loader_dsp.fw");
MODULE_FIRMWARE("ea/echo3g_dsp.fw");
MODULE_FIRMWARE("ea/3g_asic.fw");

#define FW_361_LOADER   0
#define FW_ECHO3G_DSP   1
#define FW_3G_ASIC      2

static const struct firmware card_fw[] = {
        {0, "loader_dsp.fw"},
        {0, "echo3g_dsp.fw"},
        {0, "3g_asic.fw"}
};

static const struct pci_device_id snd_echo_ids[] = {
        {0x1057, 0x3410, 0xECC0, 0x0100, 0, 0, 0},      /* Echo 3G */
        {0,}
};

static const struct snd_pcm_hardware pcm_hardware_skel = {
        .info = SNDRV_PCM_INFO_MMAP |
                SNDRV_PCM_INFO_INTERLEAVED |
                SNDRV_PCM_INFO_BLOCK_TRANSFER |
                SNDRV_PCM_INFO_MMAP_VALID |
                SNDRV_PCM_INFO_PAUSE |
                SNDRV_PCM_INFO_SYNC_START,
        .formats =      SNDRV_PCM_FMTBIT_U8 |
                        SNDRV_PCM_FMTBIT_S16_LE |
                        SNDRV_PCM_FMTBIT_S24_3LE |
                        SNDRV_PCM_FMTBIT_S32_LE |
                        SNDRV_PCM_FMTBIT_S32_BE,
        .rates =        SNDRV_PCM_RATE_32000 |
                        SNDRV_PCM_RATE_44100 |
                        SNDRV_PCM_RATE_48000 |
                        SNDRV_PCM_RATE_88200 |
                        SNDRV_PCM_RATE_96000 |
                        SNDRV_PCM_RATE_CONTINUOUS,
        .rate_min = 32000,
        .rate_max = 100000,
        .channels_min = 1,
        .channels_max = 8,
        .buffer_bytes_max = 262144,
        .period_bytes_min = 32,
        .period_bytes_max = 131072,
        .periods_min = 2,
        .periods_max = 220,
};

#include "echo3g_dsp.c"
#include "echoaudio_dsp.c"
#include "echoaudio_3g.c"
#include "echoaudio.c"
#include "midi.c"