// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Copyright (c) 2010 Sascha Hauer <s.hauer@pengutronix.de>
 * Copyright (C) 2005-2009 Freescale Semiconductor, Inc.
 */
#include <linux/export.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/platform_device.h>

#include <video/imx-ipu-v3.h>
#include "ipu-prv.h"

struct ipu_di {
        void __iomem *base;
        int id;
        u32 module;
        struct clk *clk_di;     /* display input clock */
        struct clk *clk_ipu;    /* IPU bus clock */
        struct clk *clk_di_pixel; /* resulting pixel clock */
        bool inuse;
        struct ipu_soc *ipu;
};

static DEFINE_MUTEX(di_mutex);

struct di_sync_config {
        int run_count;
        int run_src;
        int offset_count;
        int offset_src;
        int repeat_count;
        int cnt_clr_src;
        int cnt_polarity_gen_en;
        int cnt_polarity_clr_src;
        int cnt_polarity_trigger_src;
        int cnt_up;
        int cnt_down;
};

enum di_pins {
        DI_PIN11 = 0,
        DI_PIN12 = 1,
        DI_PIN13 = 2,
        DI_PIN14 = 3,
        DI_PIN15 = 4,
        DI_PIN16 = 5,
        DI_PIN17 = 6,
        DI_PIN_CS = 7,

        DI_PIN_SER_CLK = 0,
        DI_PIN_SER_RS = 1,
};

enum di_sync_wave {
        DI_SYNC_NONE = 0,
        DI_SYNC_CLK = 1,
        DI_SYNC_INT_HSYNC = 2,
        DI_SYNC_HSYNC = 3,
        DI_SYNC_VSYNC = 4,
        DI_SYNC_DE = 6,

        DI_SYNC_CNT1 = 2,       /* counter >= 2 only */
        DI_SYNC_CNT4 = 5,       /* counter >= 5 only */
        DI_SYNC_CNT5 = 6,       /* counter >= 6 only */
};

#define SYNC_WAVE 0

#define DI_GENERAL              0x0000
#define DI_BS_CLKGEN0           0x0004
#define DI_BS_CLKGEN1           0x0008
#define DI_SW_GEN0(gen)         (0x000c + 4 * ((gen) - 1))
#define DI_SW_GEN1(gen)         (0x0030 + 4 * ((gen) - 1))
#define DI_STP_REP(gen)         (0x0148 + 4 * (((gen) - 1)/2))
#define DI_SYNC_AS_GEN          0x0054
#define DI_DW_GEN(gen)          (0x0058 + 4 * (gen))
#define DI_DW_SET(gen, set)     (0x0088 + 4 * ((gen) + 0xc * (set)))
#define DI_SER_CONF             0x015c
#define DI_SSC                  0x0160
#define DI_POL                  0x0164
#define DI_AW0                  0x0168
#define DI_AW1                  0x016c
#define DI_SCR_CONF             0x0170
#define DI_STAT                 0x0174

#define DI_SW_GEN0_RUN_COUNT(x)                 ((x) << 19)
#define DI_SW_GEN0_RUN_SRC(x)                   ((x) << 16)
#define DI_SW_GEN0_OFFSET_COUNT(x)              ((x) << 3)
#define DI_SW_GEN0_OFFSET_SRC(x)                ((x) << 0)

#define DI_SW_GEN1_CNT_POL_GEN_EN(x)            ((x) << 29)
#define DI_SW_GEN1_CNT_CLR_SRC(x)               ((x) << 25)
#define DI_SW_GEN1_CNT_POL_TRIGGER_SRC(x)       ((x) << 12)
#define DI_SW_GEN1_CNT_POL_CLR_SRC(x)           ((x) << 9)
#define DI_SW_GEN1_CNT_DOWN(x)                  ((x) << 16)
#define DI_SW_GEN1_CNT_UP(x)                    (x)
#define DI_SW_GEN1_AUTO_RELOAD                  (0x10000000)

#define DI_DW_GEN_ACCESS_SIZE_OFFSET            24
#define DI_DW_GEN_COMPONENT_SIZE_OFFSET         16

#define DI_GEN_POLARITY_1                       (1 << 0)
#define DI_GEN_POLARITY_2                       (1 << 1)
#define DI_GEN_POLARITY_3                       (1 << 2)
#define DI_GEN_POLARITY_4                       (1 << 3)
#define DI_GEN_POLARITY_5                       (1 << 4)
#define DI_GEN_POLARITY_6                       (1 << 5)
#define DI_GEN_POLARITY_7                       (1 << 6)
#define DI_GEN_POLARITY_8                       (1 << 7)
#define DI_GEN_POLARITY_DISP_CLK                (1 << 17)
#define DI_GEN_DI_CLK_EXT                       (1 << 20)
#define DI_GEN_DI_VSYNC_EXT                     (1 << 21)

#define DI_POL_DRDY_DATA_POLARITY               (1 << 7)
#define DI_POL_DRDY_POLARITY_15                 (1 << 4)

#define DI_VSYNC_SEL_OFFSET                     13

static inline u32 ipu_di_read(struct ipu_di *di, unsigned offset)
{
        return readl(di->base + offset);
}

static inline void ipu_di_write(struct ipu_di *di, u32 value, unsigned offset)
{
        writel(value, di->base + offset);
}

static void ipu_di_data_wave_config(struct ipu_di *di,
                                     int wave_gen,
                                     int access_size, int component_size)
{
        u32 reg;
        reg = (access_size << DI_DW_GEN_ACCESS_SIZE_OFFSET) |
            (component_size << DI_DW_GEN_COMPONENT_SIZE_OFFSET);
        ipu_di_write(di, reg, DI_DW_GEN(wave_gen));
}

static void ipu_di_data_pin_config(struct ipu_di *di, int wave_gen, int di_pin,
                int set, int up, int down)
{
        u32 reg;

        reg = ipu_di_read(di, DI_DW_GEN(wave_gen));
        reg &= ~(0x3 << (di_pin * 2));
        reg |= set << (di_pin * 2);
        ipu_di_write(di, reg, DI_DW_GEN(wave_gen));

        ipu_di_write(di, (down << 16) | up, DI_DW_SET(wave_gen, set));
}

static void ipu_di_sync_config(struct ipu_di *di, struct di_sync_config *config,
                int start, int count)
{
        u32 reg;
        int i;

        for (i = 0; i < count; i++) {
                struct di_sync_config *c = &config[i];
                int wave_gen = start + i + 1;

                if ((c->run_count >= 0x1000) || (c->offset_count >= 0x1000) ||
                                (c->repeat_count >= 0x1000) ||
                                (c->cnt_up >= 0x400) ||
                                (c->cnt_down >= 0x400)) {
                        dev_err(di->ipu->dev, "DI%d counters out of range.\n",
                                        di->id);
                        return;
                }

                reg = DI_SW_GEN0_RUN_COUNT(c->run_count) |
                        DI_SW_GEN0_RUN_SRC(c->run_src) |
                        DI_SW_GEN0_OFFSET_COUNT(c->offset_count) |
                        DI_SW_GEN0_OFFSET_SRC(c->offset_src);
                ipu_di_write(di, reg, DI_SW_GEN0(wave_gen));

                reg = DI_SW_GEN1_CNT_POL_GEN_EN(c->cnt_polarity_gen_en) |
                        DI_SW_GEN1_CNT_CLR_SRC(c->cnt_clr_src) |
                        DI_SW_GEN1_CNT_POL_TRIGGER_SRC(
                                        c->cnt_polarity_trigger_src) |
                        DI_SW_GEN1_CNT_POL_CLR_SRC(c->cnt_polarity_clr_src) |
                        DI_SW_GEN1_CNT_DOWN(c->cnt_down) |
                        DI_SW_GEN1_CNT_UP(c->cnt_up);

                /* Enable auto reload */
                if (c->repeat_count == 0)
                        reg |= DI_SW_GEN1_AUTO_RELOAD;

                ipu_di_write(di, reg, DI_SW_GEN1(wave_gen));

                reg = ipu_di_read(di, DI_STP_REP(wave_gen));
                reg &= ~(0xffff << (16 * ((wave_gen - 1) & 0x1)));
                reg |= c->repeat_count << (16 * ((wave_gen - 1) & 0x1));
                ipu_di_write(di, reg, DI_STP_REP(wave_gen));
        }
}

static void ipu_di_sync_config_interlaced(struct ipu_di *di,
                struct ipu_di_signal_cfg *sig)
{
        u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
                sig->mode.hback_porch + sig->mode.hfront_porch;
        u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
                sig->mode.vback_porch + sig->mode.vfront_porch;
        struct di_sync_config cfg[] = {
                {
                        /* 1: internal VSYNC for each frame */
                        .run_count = v_total * 2 - 1,
                        .run_src = 3,                   /* == counter 7 */
                }, {
                        /* PIN2: HSYNC waveform */
                        .run_count = h_total - 1,
                        .run_src = DI_SYNC_CLK,
                        .cnt_polarity_gen_en = 1,
                        .cnt_polarity_trigger_src = DI_SYNC_CLK,
                        .cnt_down = sig->mode.hsync_len * 2,
                }, {
                        /* PIN3: VSYNC waveform */
                        .run_count = v_total - 1,
                        .run_src = 4,                   /* == counter 7 */
                        .cnt_polarity_gen_en = 1,
                        .cnt_polarity_trigger_src = 4,  /* == counter 7 */
                        .cnt_down = sig->mode.vsync_len * 2,
                        .cnt_clr_src = DI_SYNC_CNT1,
                }, {
                        /* 4: Field */
                        .run_count = v_total / 2,
                        .run_src = DI_SYNC_HSYNC,
                        .offset_count = h_total / 2,
                        .offset_src = DI_SYNC_CLK,
                        .repeat_count = 2,
                        .cnt_clr_src = DI_SYNC_CNT1,
                }, {
                        /* 5: Active lines */
                        .run_src = DI_SYNC_HSYNC,
                        .offset_count = (sig->mode.vsync_len +
                                         sig->mode.vback_porch) / 2,
                        .offset_src = DI_SYNC_HSYNC,
                        .repeat_count = sig->mode.vactive / 2,
                        .cnt_clr_src = DI_SYNC_CNT4,
                }, {
                        /* 6: Active pixel, referenced by DC */
                        .run_src = DI_SYNC_CLK,
                        .offset_count = sig->mode.hsync_len +
                                        sig->mode.hback_porch,
                        .offset_src = DI_SYNC_CLK,
                        .repeat_count = sig->mode.hactive,
                        .cnt_clr_src = DI_SYNC_CNT5,
                }, {
                        /* 7: Half line HSYNC */
                        .run_count = h_total / 2 - 1,
                        .run_src = DI_SYNC_CLK,
                }
        };

        ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));

        ipu_di_write(di, v_total / 2 - 1, DI_SCR_CONF);
}

static void ipu_di_sync_config_noninterlaced(struct ipu_di *di,
                struct ipu_di_signal_cfg *sig, int div)
{
        u32 h_total = sig->mode.hactive + sig->mode.hsync_len +
                sig->mode.hback_porch + sig->mode.hfront_porch;
        u32 v_total = sig->mode.vactive + sig->mode.vsync_len +
                sig->mode.vback_porch + sig->mode.vfront_porch;
        struct di_sync_config cfg[] = {
                {
                        /* 1: INT_HSYNC */
                        .run_count = h_total - 1,
                        .run_src = DI_SYNC_CLK,
                } , {
                        /* PIN2: HSYNC */
                        .run_count = h_total - 1,
                        .run_src = DI_SYNC_CLK,
                        .offset_count = div * sig->v_to_h_sync,
                        .offset_src = DI_SYNC_CLK,
                        .cnt_polarity_gen_en = 1,
                        .cnt_polarity_trigger_src = DI_SYNC_CLK,
                        .cnt_down = sig->mode.hsync_len * 2,
                } , {
                        /* PIN3: VSYNC */
                        .run_count = v_total - 1,
                        .run_src = DI_SYNC_INT_HSYNC,
                        .cnt_polarity_gen_en = 1,
                        .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
                        .cnt_down = sig->mode.vsync_len * 2,
                } , {
                        /* 4: Line Active */
                        .run_src = DI_SYNC_HSYNC,
                        .offset_count = sig->mode.vsync_len +
                                        sig->mode.vback_porch,
                        .offset_src = DI_SYNC_HSYNC,
                        .repeat_count = sig->mode.vactive,
                        .cnt_clr_src = DI_SYNC_VSYNC,
                } , {
                        /* 5: Pixel Active, referenced by DC */
                        .run_src = DI_SYNC_CLK,
                        .offset_count = sig->mode.hsync_len +
                                        sig->mode.hback_porch,
                        .offset_src = DI_SYNC_CLK,
                        .repeat_count = sig->mode.hactive,
                        .cnt_clr_src = 5, /* Line Active */
                } , {
                        /* unused */
                } , {
                        /* unused */
                },
        };
        /* can't use #7 and #8 for line active and pixel active counters */
        struct di_sync_config cfg_vga[] = {
                {
                        /* 1: INT_HSYNC */
                        .run_count = h_total - 1,
                        .run_src = DI_SYNC_CLK,
                } , {
                        /* 2: VSYNC */
                        .run_count = v_total - 1,
                        .run_src = DI_SYNC_INT_HSYNC,
                } , {
                        /* 3: Line Active */
                        .run_src = DI_SYNC_INT_HSYNC,
                        .offset_count = sig->mode.vsync_len +
                                        sig->mode.vback_porch,
                        .offset_src = DI_SYNC_INT_HSYNC,
                        .repeat_count = sig->mode.vactive,
                        .cnt_clr_src = 3 /* VSYNC */,
                } , {
                        /* PIN4: HSYNC for VGA via TVEv2 on TQ MBa53 */
                        .run_count = h_total - 1,
                        .run_src = DI_SYNC_CLK,
                        .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */
                        .offset_src = DI_SYNC_CLK,
                        .cnt_polarity_gen_en = 1,
                        .cnt_polarity_trigger_src = DI_SYNC_CLK,
                        .cnt_down = sig->mode.hsync_len * 2,
                } , {
                        /* 5: Pixel Active signal to DC */
                        .run_src = DI_SYNC_CLK,
                        .offset_count = sig->mode.hsync_len +
                                        sig->mode.hback_porch,
                        .offset_src = DI_SYNC_CLK,
                        .repeat_count = sig->mode.hactive,
                        .cnt_clr_src = 4, /* Line Active */
                } , {
                        /* PIN6: VSYNC for VGA via TVEv2 on TQ MBa53 */
                        .run_count = v_total - 1,
                        .run_src = DI_SYNC_INT_HSYNC,
                        .offset_count = 1, /* magic value from Freescale TVE driver */
                        .offset_src = DI_SYNC_INT_HSYNC,
                        .cnt_polarity_gen_en = 1,
                        .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
                        .cnt_down = sig->mode.vsync_len * 2,
                } , {
                        /* PIN4: HSYNC for VGA via TVEv2 on i.MX53-QSB */
                        .run_count = h_total - 1,
                        .run_src = DI_SYNC_CLK,
                        .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */
                        .offset_src = DI_SYNC_CLK,
                        .cnt_polarity_gen_en = 1,
                        .cnt_polarity_trigger_src = DI_SYNC_CLK,
                        .cnt_down = sig->mode.hsync_len * 2,
                } , {
                        /* PIN6: VSYNC for VGA via TVEv2 on i.MX53-QSB */
                        .run_count = v_total - 1,
                        .run_src = DI_SYNC_INT_HSYNC,
                        .offset_count = 1, /* magic value from Freescale TVE driver */
                        .offset_src = DI_SYNC_INT_HSYNC,
                        .cnt_polarity_gen_en = 1,
                        .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC,
                        .cnt_down = sig->mode.vsync_len * 2,
                } , {
                        /* unused */
                },
        };

        ipu_di_write(di, v_total - 1, DI_SCR_CONF);
        if (sig->hsync_pin == 2 && sig->vsync_pin == 3)
                ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg));
        else
                ipu_di_sync_config(di, cfg_vga, 0, ARRAY_SIZE(cfg_vga));
}

static void ipu_di_config_clock(struct ipu_di *di,
        const struct ipu_di_signal_cfg *sig)
{
        struct clk *clk;
        unsigned clkgen0;
        uint32_t val;

        if (sig->clkflags & IPU_DI_CLKMODE_EXT) {
                /*
                 * CLKMODE_EXT means we must use the DI clock: this is
                 * needed for things like LVDS which needs to feed the
                 * DI and LDB with the same pixel clock.
                 */
                clk = di->clk_di;

                if (sig->clkflags & IPU_DI_CLKMODE_SYNC) {
                        /*
                         * CLKMODE_SYNC means that we want the DI to be
                         * clocked at the same rate as the parent clock.
                         * This is needed (eg) for LDB which needs to be
                         * fed with the same pixel clock.  We assume that
                         * the LDB clock has already been set correctly.
                         */
                        clkgen0 = 1 << 4;
                } else {
                        /*
                         * We can use the divider.  We should really have
                         * a flag here indicating whether the bridge can
                         * cope with a fractional divider or not.  For the
                         * time being, let's go for simplicitly and
                         * reliability.
                         */
                        unsigned long in_rate;
                        unsigned div;

                        clk_set_rate(clk, sig->mode.pixelclock);

                        in_rate = clk_get_rate(clk);
                        div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
                        div = clamp(div, 1U, 255U);

                        clkgen0 = div << 4;
                }
        } else {
                /*
                 * For other interfaces, we can arbitarily select between
                 * the DI specific clock and the internal IPU clock.  See
                 * DI_GENERAL bit 20.  We select the IPU clock if it can
                 * give us a clock rate within 1% of the requested frequency,
                 * otherwise we use the DI clock.
                 */
                unsigned long rate, clkrate;
                unsigned div, error;

                clkrate = clk_get_rate(di->clk_ipu);
                div = DIV_ROUND_CLOSEST(clkrate, sig->mode.pixelclock);
                div = clamp(div, 1U, 255U);
                rate = clkrate / div;

                error = rate / (sig->mode.pixelclock / 1000);

                dev_dbg(di->ipu->dev, "  IPU clock can give %lu with divider %u, error %c%d.%d%%\n",
                        rate, div, error < 1000 ? '-' : '+',
                        abs(error - 1000) / 10, abs(error - 1000) % 10);

                /* Allow a 1% error */
                if (error < 1010 && error >= 990) {
                        clk = di->clk_ipu;

                        clkgen0 = div << 4;
                } else {
                        unsigned long in_rate;
                        unsigned div;

                        clk = di->clk_di;

                        clk_set_rate(clk, sig->mode.pixelclock);

                        in_rate = clk_get_rate(clk);
                        div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock);
                        div = clamp(div, 1U, 255U);

                        clkgen0 = div << 4;
                }
        }

        di->clk_di_pixel = clk;

        /* Set the divider */
        ipu_di_write(di, clkgen0, DI_BS_CLKGEN0);

        /*
         * Set the high/low periods.  Bits 24:16 give us the falling edge,
         * and bits 8:0 give the rising edge.  LSB is fraction, and is
         * based on the divider above.  We want a 50% duty cycle, so set
         * the falling edge to be half the divider.
         */
        ipu_di_write(di, (clkgen0 >> 4) << 16, DI_BS_CLKGEN1);

        /* Finally select the input clock */
        val = ipu_di_read(di, DI_GENERAL) & ~DI_GEN_DI_CLK_EXT;
        if (clk == di->clk_di)
                val |= DI_GEN_DI_CLK_EXT;
        ipu_di_write(di, val, DI_GENERAL);

        dev_dbg(di->ipu->dev, "Want %luHz IPU %luHz DI %luHz using %s, %luHz\n",
                sig->mode.pixelclock,
                clk_get_rate(di->clk_ipu),
                clk_get_rate(di->clk_di),
                clk == di->clk_di ? "DI" : "IPU",
                clk_get_rate(di->clk_di_pixel) / (clkgen0 >> 4));
}

/*
 * This function is called to adjust a video mode to IPU restrictions.
 * It is meant to be called from drm crtc mode_fixup() methods.
 */
int ipu_di_adjust_videomode(struct ipu_di *di, struct videomode *mode)
{
        u32 diff;

        if (!IS_ALIGNED(mode->hactive, 8) &&
            mode->hfront_porch < ALIGN(mode->hactive, 8) - mode->hactive) {
                dev_err(di->ipu->dev, "hactive %d is not aligned to 8 and front porch is too small to compensate\n",
                        mode->hactive);
                return -EINVAL;
        }

        if (mode->vfront_porch >= 2)
                return 0;

        diff = 2 - mode->vfront_porch;

        if (mode->vback_porch >= diff) {
                mode->vfront_porch = 2;
                mode->vback_porch -= diff;
        } else if (mode->vsync_len > diff) {
                mode->vfront_porch = 2;
                mode->vsync_len = mode->vsync_len - diff;
        } else {
                dev_warn(di->ipu->dev, "failed to adjust videomode\n");
                return -EINVAL;
        }

        dev_dbg(di->ipu->dev, "videomode adapted for IPU restrictions\n");
        return 0;
}
EXPORT_SYMBOL_GPL(ipu_di_adjust_videomode);

static u32 ipu_di_gen_polarity(int pin)
{
        switch (pin) {
        case 1:
                return DI_GEN_POLARITY_1;
        case 2:
                return DI_GEN_POLARITY_2;
        case 3:
                return DI_GEN_POLARITY_3;
        case 4:
                return DI_GEN_POLARITY_4;
        case 5:
                return DI_GEN_POLARITY_5;
        case 6:
                return DI_GEN_POLARITY_6;
        case 7:
                return DI_GEN_POLARITY_7;
        case 8:
                return DI_GEN_POLARITY_8;
        }
        return 0;
}

int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig)
{
        u32 reg;
        u32 di_gen, vsync_cnt;
        u32 div;

        dev_dbg(di->ipu->dev, "disp %d: panel size = %d x %d\n",
                di->id, sig->mode.hactive, sig->mode.vactive);

        dev_dbg(di->ipu->dev, "Clocks: IPU %luHz DI %luHz Needed %luHz\n",
                clk_get_rate(di->clk_ipu),
                clk_get_rate(di->clk_di),
                sig->mode.pixelclock);

        mutex_lock(&di_mutex);

        ipu_di_config_clock(di, sig);

        div = ipu_di_read(di, DI_BS_CLKGEN0) & 0xfff;
        div = div / 16;         /* Now divider is integer portion */

        /* Setup pixel clock timing */
        /* Down time is half of period */
        ipu_di_write(di, (div << 16), DI_BS_CLKGEN1);

        ipu_di_data_wave_config(di, SYNC_WAVE, div - 1, div - 1);
        ipu_di_data_pin_config(di, SYNC_WAVE, DI_PIN15, 3, 0, div * 2);

        di_gen = ipu_di_read(di, DI_GENERAL) & DI_GEN_DI_CLK_EXT;
        di_gen |= DI_GEN_DI_VSYNC_EXT;

        if (sig->mode.flags & DISPLAY_FLAGS_INTERLACED) {
                ipu_di_sync_config_interlaced(di, sig);

                /* set y_sel = 1 */
                di_gen |= 0x10000000;

                vsync_cnt = 3;
        } else {
                ipu_di_sync_config_noninterlaced(di, sig, div);

                vsync_cnt = 3;
                if (di->id == 1)
                        /*
                         * TODO: change only for TVEv2, parallel display
                         * uses pin 2 / 3
                         */
                        if (!(sig->hsync_pin == 2 && sig->vsync_pin == 3))
                                vsync_cnt = 6;
        }

        if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH)
                di_gen |= ipu_di_gen_polarity(sig->hsync_pin);
        if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH)
                di_gen |= ipu_di_gen_polarity(sig->vsync_pin);

        if (sig->clk_pol)
                di_gen |= DI_GEN_POLARITY_DISP_CLK;

        ipu_di_write(di, di_gen, DI_GENERAL);

        ipu_di_write(di, (--vsync_cnt << DI_VSYNC_SEL_OFFSET) | 0x00000002,
                     DI_SYNC_AS_GEN);

        reg = ipu_di_read(di, DI_POL);
        reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15);

        if (sig->enable_pol)
                reg |= DI_POL_DRDY_POLARITY_15;
        if (sig->data_pol)
                reg |= DI_POL_DRDY_DATA_POLARITY;

        ipu_di_write(di, reg, DI_POL);

        mutex_unlock(&di_mutex);

        return 0;
}
EXPORT_SYMBOL_GPL(ipu_di_init_sync_panel);

int ipu_di_enable(struct ipu_di *di)
{
        int ret;

        WARN_ON(IS_ERR(di->clk_di_pixel));

        ret = clk_prepare_enable(di->clk_di_pixel);
        if (ret)
                return ret;

        ipu_module_enable(di->ipu, di->module);

        return 0;
}
EXPORT_SYMBOL_GPL(ipu_di_enable);

int ipu_di_disable(struct ipu_di *di)
{
        WARN_ON(IS_ERR(di->clk_di_pixel));

        ipu_module_disable(di->ipu, di->module);

        clk_disable_unprepare(di->clk_di_pixel);

        return 0;
}
EXPORT_SYMBOL_GPL(ipu_di_disable);

int ipu_di_get_num(struct ipu_di *di)
{
        return di->id;
}
EXPORT_SYMBOL_GPL(ipu_di_get_num);

static DEFINE_MUTEX(ipu_di_lock);

struct ipu_di *ipu_di_get(struct ipu_soc *ipu, int disp)
{
        struct ipu_di *di;

        if (disp > 1)
                return ERR_PTR(-EINVAL);

        di = ipu->di_priv[disp];

        mutex_lock(&ipu_di_lock);

        if (di->inuse) {
                di = ERR_PTR(-EBUSY);
                goto out;
        }

        di->inuse = true;
out:
        mutex_unlock(&ipu_di_lock);

        return di;
}
EXPORT_SYMBOL_GPL(ipu_di_get);

void ipu_di_put(struct ipu_di *di)
{
        mutex_lock(&ipu_di_lock);

        di->inuse = false;

        mutex_unlock(&ipu_di_lock);
}
EXPORT_SYMBOL_GPL(ipu_di_put);

int ipu_di_init(struct ipu_soc *ipu, struct device *dev, int id,
                unsigned long base,
                u32 module, struct clk *clk_ipu)
{
        struct ipu_di *di;

        if (id > 1)
                return -ENODEV;

        di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
        if (!di)
                return -ENOMEM;

        ipu->di_priv[id] = di;

        di->clk_di = devm_clk_get(dev, id ? "di1" : "di0");
        if (IS_ERR(di->clk_di))
                return PTR_ERR(di->clk_di);

        di->module = module;
        di->id = id;
        di->clk_ipu = clk_ipu;
        di->base = devm_ioremap(dev, base, PAGE_SIZE);
        if (!di->base)
                return -ENOMEM;

        ipu_di_write(di, 0x10, DI_BS_CLKGEN0);

        dev_dbg(dev, "DI%d base: 0x%08lx remapped to %p\n",
                        id, base, di->base);
        di->inuse = false;
        di->ipu = ipu;

        return 0;
}

void ipu_di_exit(struct ipu_soc *ipu, int id)
{
}