// SPDX-License-Identifier: GPL-2.0
/*
 * AIRcable USB Bluetooth Dongle Driver.
 *
 * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
 * Copyright (C) 2006 Manuel Francisco Naranjo (naranjo.manuel@gmail.com)
 *
 * The device works as an standard CDC device, it has 2 interfaces, the first
 * one is for firmware access and the second is the serial one.
 * The protocol is very simply, there are two possibilities reading or writing.
 * When writing the first urb must have a Header that starts with 0x20 0x29 the
 * next two bytes must say how much data will be sent.
 * When reading the process is almost equal except that the header starts with
 * 0x00 0x20.
 *
 * The device simply need some stuff to understand data coming from the usb
 * buffer: The First and Second byte is used for a Header, the Third and Fourth
 * tells the  device the amount of information the package holds.
 * Packages are 60 bytes long Header Stuff.
 * When writing to the device the first two bytes of the header are 0x20 0x29
 * When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange
 * situation, when too much data arrives to the device because it sends the data
 * but with out the header. I will use a simply hack to override this situation,
 * if there is data coming that does not contain any header, then that is data
 * that must go directly to the tty, as there is no documentation about if there
 * is any other control code, I will simply check for the first
 * one.
 *
 * I have taken some info from a Greg Kroah-Hartman article:
 * http://www.linuxjournal.com/article/6573
 * And from Linux Device Driver Kit CD, which is a great work, the authors taken
 * the work to recompile lots of information an knowledge in drivers development
 * and made it all available inside a cd.
 * URL: http://kernel.org/pub/linux/kernel/people/gregkh/ddk/
 *
 */

#include <linux/unaligned.h>
#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/tty_flip.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>

/* Vendor and Product ID */
#define AIRCABLE_VID            0x16CA
#define AIRCABLE_USB_PID        0x1502

/* Protocol Stuff */
#define HCI_HEADER_LENGTH       0x4
#define TX_HEADER_0             0x20
#define TX_HEADER_1             0x29
#define RX_HEADER_0             0x00
#define RX_HEADER_1             0x20
#define HCI_COMPLETE_FRAME      64

/* rx_flags */
#define THROTTLED               0x01
#define ACTUALLY_THROTTLED      0x02

#define DRIVER_AUTHOR "Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>, Johan Hovold <jhovold@gmail.com>"
#define DRIVER_DESC "AIRcable USB Driver"

/* ID table that will be registered with USB core */
static const struct usb_device_id id_table[] = {
        { USB_DEVICE(AIRCABLE_VID, AIRCABLE_USB_PID) },
        { },
};
MODULE_DEVICE_TABLE(usb, id_table);

static int aircable_prepare_write_buffer(struct usb_serial_port *port,
                                                void *dest, size_t size)
{
        int count;
        unsigned char *buf = dest;

        count = kfifo_out_locked(&port->write_fifo, buf + HCI_HEADER_LENGTH,
                                        size - HCI_HEADER_LENGTH, &port->lock);
        buf[0] = TX_HEADER_0;
        buf[1] = TX_HEADER_1;
        put_unaligned_le16(count, &buf[2]);

        return count + HCI_HEADER_LENGTH;
}

static int aircable_calc_num_ports(struct usb_serial *serial,
                                        struct usb_serial_endpoints *epds)
{
        /* Ignore the first interface, which has no bulk endpoints. */
        if (epds->num_bulk_out == 0) {
                dev_dbg(&serial->interface->dev,
                        "ignoring interface with no bulk-out endpoints\n");
                return -ENODEV;
        }

        return 1;
}

static int aircable_process_packet(struct usb_serial_port *port,
                int has_headers, char *packet, int len)
{
        if (has_headers) {
                len -= HCI_HEADER_LENGTH;
                packet += HCI_HEADER_LENGTH;
        }
        if (len <= 0) {
                dev_dbg(&port->dev, "%s - malformed packet\n", __func__);
                return 0;
        }

        tty_insert_flip_string(&port->port, packet, len);

        return len;
}

static void aircable_process_read_urb(struct urb *urb)
{
        struct usb_serial_port *port = urb->context;
        char *data = urb->transfer_buffer;
        int has_headers;
        int count;
        int len;
        int i;

        has_headers = (urb->actual_length > 2 && data[0] == RX_HEADER_0);

        count = 0;
        for (i = 0; i < urb->actual_length; i += HCI_COMPLETE_FRAME) {
                len = min_t(int, urb->actual_length - i, HCI_COMPLETE_FRAME);
                count += aircable_process_packet(port, has_headers,
                                                                &data[i], len);
        }

        if (count)
                tty_flip_buffer_push(&port->port);
}

static struct usb_serial_driver aircable_device = {
        .driver = {
                .name =         "aircable",
        },
        .id_table =             id_table,
        .bulk_out_size =        HCI_COMPLETE_FRAME,
        .calc_num_ports =       aircable_calc_num_ports,
        .process_read_urb =     aircable_process_read_urb,
        .prepare_write_buffer = aircable_prepare_write_buffer,
        .throttle =             usb_serial_generic_throttle,
        .unthrottle =           usb_serial_generic_unthrottle,
};

static struct usb_serial_driver * const serial_drivers[] = {
        &aircable_device, NULL
};

module_usb_serial_driver(serial_drivers, id_table);

MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL v2");