// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
 */

#include <linux/pci.h>

#include "pcie-designware.h"
#include "pcie-qcom-common.h"

void qcom_pcie_common_set_equalization(struct dw_pcie *pci)
{
        struct device *dev = pci->dev;
        u32 reg;
        u16 speed;

        /*
         * GEN3_RELATED_OFF register is repurposed to apply equalization
         * settings at various data transmission rates through registers namely
         * GEN3_EQ_*. The RATE_SHADOW_SEL bit field of GEN3_RELATED_OFF
         * determines the data rate for which these equalization settings are
         * applied.
         */

        for (speed = PCIE_SPEED_8_0GT; speed <= pcie_link_speed[pci->max_link_speed]; speed++) {
                if (speed > PCIE_SPEED_32_0GT) {
                        dev_warn(dev, "Skipped equalization settings for unsupported data rate\n");
                        break;
                }

                reg = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
                reg &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL;
                reg &= ~GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK;
                reg |= FIELD_PREP(GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK,
                          speed - PCIE_SPEED_8_0GT);
                dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, reg);

                reg = dw_pcie_readl_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF);
                reg &= ~(GEN3_EQ_FMDC_T_MIN_PHASE23 |
                        GEN3_EQ_FMDC_N_EVALS |
                        GEN3_EQ_FMDC_MAX_PRE_CURSOR_DELTA |
                        GEN3_EQ_FMDC_MAX_POST_CURSOR_DELTA);
                reg |= FIELD_PREP(GEN3_EQ_FMDC_T_MIN_PHASE23, 0x1) |
                        FIELD_PREP(GEN3_EQ_FMDC_N_EVALS, 0xd) |
                        FIELD_PREP(GEN3_EQ_FMDC_MAX_PRE_CURSOR_DELTA, 0x5) |
                        FIELD_PREP(GEN3_EQ_FMDC_MAX_POST_CURSOR_DELTA, 0x5);
                dw_pcie_writel_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF, reg);

                reg = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF);
                reg &= ~(GEN3_EQ_CONTROL_OFF_FB_MODE |
                        GEN3_EQ_CONTROL_OFF_PHASE23_EXIT_MODE |
                        GEN3_EQ_CONTROL_OFF_FOM_INC_INITIAL_EVAL |
                        GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC);
                dw_pcie_writel_dbi(pci, GEN3_EQ_CONTROL_OFF, reg);
        }
}
EXPORT_SYMBOL_GPL(qcom_pcie_common_set_equalization);

void qcom_pcie_common_set_16gt_lane_margining(struct dw_pcie *pci)
{
        u32 reg;

        reg = dw_pcie_readl_dbi(pci, GEN4_LANE_MARGINING_1_OFF);
        reg &= ~(MARGINING_MAX_VOLTAGE_OFFSET |
                MARGINING_NUM_VOLTAGE_STEPS |
                MARGINING_MAX_TIMING_OFFSET |
                MARGINING_NUM_TIMING_STEPS);
        reg |= FIELD_PREP(MARGINING_MAX_VOLTAGE_OFFSET, 0x24) |
                FIELD_PREP(MARGINING_NUM_VOLTAGE_STEPS, 0x78) |
                FIELD_PREP(MARGINING_MAX_TIMING_OFFSET, 0x32) |
                FIELD_PREP(MARGINING_NUM_TIMING_STEPS, 0x10);
        dw_pcie_writel_dbi(pci, GEN4_LANE_MARGINING_1_OFF, reg);

        reg = dw_pcie_readl_dbi(pci, GEN4_LANE_MARGINING_2_OFF);
        reg |= MARGINING_IND_ERROR_SAMPLER |
                MARGINING_SAMPLE_REPORTING_METHOD |
                MARGINING_IND_LEFT_RIGHT_TIMING |
                MARGINING_VOLTAGE_SUPPORTED;
        reg &= ~(MARGINING_IND_UP_DOWN_VOLTAGE |
                MARGINING_MAXLANES |
                MARGINING_SAMPLE_RATE_TIMING |
                MARGINING_SAMPLE_RATE_VOLTAGE);
        reg |= FIELD_PREP(MARGINING_MAXLANES, pci->num_lanes) |
                FIELD_PREP(MARGINING_SAMPLE_RATE_TIMING, 0x3f) |
                FIELD_PREP(MARGINING_SAMPLE_RATE_VOLTAGE, 0x3f);
        dw_pcie_writel_dbi(pci, GEN4_LANE_MARGINING_2_OFF, reg);
}
EXPORT_SYMBOL_GPL(qcom_pcie_common_set_16gt_lane_margining);