// SPDX-License-Identifier: GPL-2.0+
/* Microchip lan969x Switch driver
 *
 * Copyright (c) 2024 Microchip Technology Inc. and its subsidiaries.
 */

#include "lan969x.h"

/* Tx clock selectors */
#define LAN969X_RGMII_TX_CLK_SEL_125MHZ 1  /* 1000Mbps */
#define LAN969X_RGMII_TX_CLK_SEL_25MHZ  2  /* 100Mbps */
#define LAN969X_RGMII_TX_CLK_SEL_2M5MHZ 3  /* 10Mbps */

/* Port speed selectors */
#define LAN969X_RGMII_SPEED_SEL_10 0   /* Select 10Mbps speed */
#define LAN969X_RGMII_SPEED_SEL_100 1  /* Select 100Mbps speed */
#define LAN969X_RGMII_SPEED_SEL_1000 2 /* Select 1000Mbps speed */

/* Clock delay selectors */
#define LAN969X_RGMII_CLK_DELAY_SEL_1_0_NS 2  /* Phase shift 45deg */
#define LAN969X_RGMII_CLK_DELAY_SEL_1_7_NS 3  /* Phase shift 77deg */
#define LAN969X_RGMII_CLK_DELAY_SEL_2_0_NS 4  /* Phase shift 90deg */
#define LAN969X_RGMII_CLK_DELAY_SEL_2_5_NS 5  /* Phase shift 112deg */
#define LAN969X_RGMII_CLK_DELAY_SEL_3_0_NS 6  /* Phase shift 135deg */
#define LAN969X_RGMII_CLK_DELAY_SEL_3_3_NS 7  /* Phase shift 147deg */

#define LAN969X_RGMII_PORT_START_IDX 28 /* Index of the first RGMII port */
#define LAN969X_RGMII_IFG_TX 4          /* TX Inter Frame Gap value */
#define LAN969X_RGMII_IFG_RX1 5         /* RX1 Inter Frame Gap value */
#define LAN969X_RGMII_IFG_RX2 1         /* RX2 Inter Frame Gap value */

#define RGMII_PORT_IDX(port) ((port)->portno - LAN969X_RGMII_PORT_START_IDX)

/* Get the tx clock selector based on the port speed. */
static int lan969x_rgmii_get_clk_sel(int speed)
{
        return (speed == SPEED_10  ? LAN969X_RGMII_TX_CLK_SEL_2M5MHZ :
                speed == SPEED_100 ? LAN969X_RGMII_TX_CLK_SEL_25MHZ :
                                     LAN969X_RGMII_TX_CLK_SEL_125MHZ);
}

/* Get the port speed selector based on the port speed. */
static int lan969x_rgmii_get_speed_sel(int speed)
{
        return (speed == SPEED_10  ? LAN969X_RGMII_SPEED_SEL_10 :
                speed == SPEED_100 ? LAN969X_RGMII_SPEED_SEL_100 :
                                     LAN969X_RGMII_SPEED_SEL_1000);
}

/* Get the clock delay selector based on the clock delay in picoseconds. */
static int lan969x_rgmii_get_clk_delay_sel(struct sparx5_port *port,
                                           u32 delay_ps, u32 *clk_delay_sel)
{
        switch (delay_ps) {
        case 0:
                /* Hardware default selector. */
                *clk_delay_sel = LAN969X_RGMII_CLK_DELAY_SEL_2_5_NS;
                break;
        case 1000:
                *clk_delay_sel = LAN969X_RGMII_CLK_DELAY_SEL_1_0_NS;
                break;
        case 1700:
                *clk_delay_sel = LAN969X_RGMII_CLK_DELAY_SEL_1_7_NS;
                break;
        case 2000:
                *clk_delay_sel = LAN969X_RGMII_CLK_DELAY_SEL_2_0_NS;
                break;
        case 2500:
                *clk_delay_sel = LAN969X_RGMII_CLK_DELAY_SEL_2_5_NS;
                break;
        case 3000:
                *clk_delay_sel = LAN969X_RGMII_CLK_DELAY_SEL_3_0_NS;
                break;
        case 3300:
                *clk_delay_sel = LAN969X_RGMII_CLK_DELAY_SEL_3_3_NS;
                break;
        default:
                dev_err(port->sparx5->dev, "Invalid RGMII delay: %u", delay_ps);
                return -EINVAL;
        }

        return 0;
}

/* Configure the RGMII tx clock frequency. */
static void lan969x_rgmii_tx_clk_config(struct sparx5_port *port,
                                        struct sparx5_port_config *conf)
{
        u32 clk_sel = lan969x_rgmii_get_clk_sel(conf->speed);
        u32 idx = RGMII_PORT_IDX(port);

        /* Take the RGMII clock domain out of reset and set tx clock
         * frequency.
         */
        spx5_rmw(HSIO_WRAP_RGMII_CFG_TX_CLK_CFG_SET(clk_sel) |
                 HSIO_WRAP_RGMII_CFG_RGMII_TX_RST_SET(0) |
                 HSIO_WRAP_RGMII_CFG_RGMII_RX_RST_SET(0),
                 HSIO_WRAP_RGMII_CFG_TX_CLK_CFG |
                 HSIO_WRAP_RGMII_CFG_RGMII_TX_RST |
                 HSIO_WRAP_RGMII_CFG_RGMII_RX_RST,
                 port->sparx5, HSIO_WRAP_RGMII_CFG(idx));
}

/* Configure the RGMII port device. */
static void lan969x_rgmii_port_device_config(struct sparx5_port *port,
                                             struct sparx5_port_config *conf)
{
        u32 dtag, dotag, etype, speed_sel, idx = RGMII_PORT_IDX(port);

        speed_sel = lan969x_rgmii_get_speed_sel(conf->speed);

        etype = (port->vlan_type == SPX5_VLAN_PORT_TYPE_S_CUSTOM ?
                 port->custom_etype :
                 port->vlan_type == SPX5_VLAN_PORT_TYPE_C ?
                 ETH_P_8021Q : ETH_P_8021AD);

        dtag = port->max_vlan_tags == SPX5_PORT_MAX_TAGS_TWO;
        dotag = port->max_vlan_tags != SPX5_PORT_MAX_TAGS_NONE;

        /* Enable the MAC. */
        spx5_wr(DEVRGMII_MAC_ENA_CFG_RX_ENA_SET(1) |
                DEVRGMII_MAC_ENA_CFG_TX_ENA_SET(1),
                port->sparx5, DEVRGMII_MAC_ENA_CFG(idx));

        /* Configure the Inter Frame Gap. */
        spx5_wr(DEVRGMII_MAC_IFG_CFG_TX_IFG_SET(LAN969X_RGMII_IFG_TX) |
                DEVRGMII_MAC_IFG_CFG_RX_IFG1_SET(LAN969X_RGMII_IFG_RX1) |
                DEVRGMII_MAC_IFG_CFG_RX_IFG2_SET(LAN969X_RGMII_IFG_RX2),
                port->sparx5, DEVRGMII_MAC_IFG_CFG(idx));

        /* Configure port data rate. */
        spx5_wr(DEVRGMII_DEV_RST_CTRL_SPEED_SEL_SET(speed_sel),
                port->sparx5, DEVRGMII_DEV_RST_CTRL(idx));

        /* Configure VLAN awareness. */
        spx5_wr(DEVRGMII_MAC_TAGS_CFG_TAG_ID_SET(etype) |
                DEVRGMII_MAC_TAGS_CFG_PB_ENA_SET(dtag) |
                DEVRGMII_MAC_TAGS_CFG_VLAN_AWR_ENA_SET(dotag) |
                DEVRGMII_MAC_TAGS_CFG_VLAN_LEN_AWR_ENA_SET(dotag),
                port->sparx5,
                DEVRGMII_MAC_TAGS_CFG(idx));
}

/* Configure the RGMII delay lines in the MAC.
 *
 * We use the rx-internal-delay-ps" and "tx-internal-delay-ps" properties to
 * configure the rx and tx delays for the MAC. If these properties are missing
 * or set to zero, the MAC will not apply any delay.
 *
 * The PHY side delays are determined by the PHY mode
 * (e.g. PHY_INTERFACE_MODE_RGMII_{ID, RXID, TXID}), and ignored by the MAC side
 * entirely.
 */
static int lan969x_rgmii_delay_config(struct sparx5_port *port,
                                      struct sparx5_port_config *conf)
{
        u32 tx_clk_sel, rx_clk_sel, tx_delay_ps = 0, rx_delay_ps = 0;
        u32 idx = RGMII_PORT_IDX(port);
        int err;

        of_property_read_u32(port->of_node, "rx-internal-delay-ps",
                             &rx_delay_ps);

        of_property_read_u32(port->of_node, "tx-internal-delay-ps",
                             &tx_delay_ps);

        err = lan969x_rgmii_get_clk_delay_sel(port, rx_delay_ps, &rx_clk_sel);
        if (err)
                return err;

        err = lan969x_rgmii_get_clk_delay_sel(port, tx_delay_ps, &tx_clk_sel);
        if (err)
                return err;

        /* Configure rx delay. */
        spx5_rmw(HSIO_WRAP_DLL_CFG_DLL_RST_SET(0) |
                 HSIO_WRAP_DLL_CFG_DLL_ENA_SET(1) |
                 HSIO_WRAP_DLL_CFG_DLL_CLK_ENA_SET(!!rx_delay_ps) |
                 HSIO_WRAP_DLL_CFG_DLL_CLK_SEL_SET(rx_clk_sel),
                 HSIO_WRAP_DLL_CFG_DLL_RST |
                 HSIO_WRAP_DLL_CFG_DLL_ENA |
                 HSIO_WRAP_DLL_CFG_DLL_CLK_ENA |
                 HSIO_WRAP_DLL_CFG_DLL_CLK_SEL,
                 port->sparx5, HSIO_WRAP_DLL_CFG(idx, 0));

        /* Configure tx delay. */
        spx5_rmw(HSIO_WRAP_DLL_CFG_DLL_RST_SET(0) |
                 HSIO_WRAP_DLL_CFG_DLL_ENA_SET(1) |
                 HSIO_WRAP_DLL_CFG_DLL_CLK_ENA_SET(!!tx_delay_ps) |
                 HSIO_WRAP_DLL_CFG_DLL_CLK_SEL_SET(tx_clk_sel),
                 HSIO_WRAP_DLL_CFG_DLL_RST |
                 HSIO_WRAP_DLL_CFG_DLL_ENA |
                 HSIO_WRAP_DLL_CFG_DLL_CLK_ENA |
                 HSIO_WRAP_DLL_CFG_DLL_CLK_SEL,
                 port->sparx5, HSIO_WRAP_DLL_CFG(idx, 1));

        return 0;
}

/* Configure GPIO's to be used as RGMII interface. */
static void lan969x_rgmii_gpio_config(struct sparx5_port *port)
{
        u32 idx = RGMII_PORT_IDX(port);

        /* Enable the RGMII on the GPIOs. */
        spx5_wr(HSIO_WRAP_XMII_CFG_GPIO_XMII_CFG_SET(1), port->sparx5,
                HSIO_WRAP_XMII_CFG(!idx));
}

int lan969x_port_config_rgmii(struct sparx5_port *port,
                              struct sparx5_port_config *conf)
{
        int err;

        err = lan969x_rgmii_delay_config(port, conf);
        if (err)
                return err;

        lan969x_rgmii_tx_clk_config(port, conf);
        lan969x_rgmii_gpio_config(port);
        lan969x_rgmii_port_device_config(port, conf);

        return 0;
}