/*
 * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the
 * OpenIB.org BSD license below:
 *
 *     Redistribution and use in source and binary forms, with or
 *     without modification, are permitted provided that the following
 *     conditions are met:
 *
 *      - Redistributions of source code must retain the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer.
 *
 *      - Redistributions in binary form must reproduce the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer in the documentation and/or other materials
 *        provided with the distribution.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#include "common.h"
#include "regs.h"

enum {
        /* MDIO_DEV_PMA_PMD registers */
        AQ_LINK_STAT    = 0xe800,
        AQ_IMASK_PMA    = 0xf000,

        /* MDIO_DEV_XGXS registers */
        AQ_XAUI_RX_CFG  = 0xc400,
        AQ_XAUI_TX_CFG  = 0xe400,

        /* MDIO_DEV_ANEG registers */
        AQ_1G_CTRL      = 0xc400,
        AQ_ANEG_STAT    = 0xc800,

        /* MDIO_DEV_VEND1 registers */
        AQ_FW_VERSION   = 0x0020,
        AQ_IFLAG_GLOBAL = 0xfc00,
        AQ_IMASK_GLOBAL = 0xff00,
};

enum {
        IMASK_PMA       = 1 << 2,
        IMASK_GLOBAL    = 1 << 15,
        ADV_1G_FULL     = 1 << 15,
        ADV_1G_HALF     = 1 << 14,
        ADV_10G_FULL    = 1 << 12,
        AQ_RESET        = (1 << 14) | (1 << 15),
        AQ_LOWPOWER     = 1 << 12,
};

static int aq100x_reset(struct cphy *phy, int wait)
{
        /*
         * Ignore the caller specified wait time; always wait for the reset to
         * complete. Can take up to 3s.
         */
        int err = t3_phy_reset(phy, MDIO_MMD_VEND1, 3000);

        if (err)
                CH_WARN(phy->adapter, "PHY%d: reset failed (0x%x).\n",
                        phy->mdio.prtad, err);

        return err;
}

static int aq100x_intr_enable(struct cphy *phy)
{
        int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AQ_IMASK_PMA, IMASK_PMA);
        if (err)
                return err;

        err = t3_mdio_write(phy, MDIO_MMD_VEND1, AQ_IMASK_GLOBAL, IMASK_GLOBAL);
        return err;
}

static int aq100x_intr_disable(struct cphy *phy)
{
        return t3_mdio_write(phy, MDIO_MMD_VEND1, AQ_IMASK_GLOBAL, 0);
}

static int aq100x_intr_clear(struct cphy *phy)
{
        unsigned int v;

        t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_IFLAG_GLOBAL, &v);
        t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &v);

        return 0;
}

static int aq100x_intr_handler(struct cphy *phy)
{
        int err;
        unsigned int cause, v;

        err = t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_IFLAG_GLOBAL, &cause);
        if (err)
                return err;

        /* Read (and reset) the latching version of the status */
        t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &v);

        return cphy_cause_link_change;
}

static int aq100x_power_down(struct cphy *phy, int off)
{
        return mdio_set_flag(&phy->mdio, phy->mdio.prtad,
                             MDIO_MMD_PMAPMD, MDIO_CTRL1,
                             MDIO_CTRL1_LPOWER, off);
}

static int aq100x_autoneg_enable(struct cphy *phy)
{
        int err;

        err = aq100x_power_down(phy, 0);
        if (!err)
                err = mdio_set_flag(&phy->mdio, phy->mdio.prtad,
                                    MDIO_MMD_AN, MDIO_CTRL1,
                                    BMCR_ANENABLE | BMCR_ANRESTART, 1);

        return err;
}

static int aq100x_autoneg_restart(struct cphy *phy)
{
        int err;

        err = aq100x_power_down(phy, 0);
        if (!err)
                err = mdio_set_flag(&phy->mdio, phy->mdio.prtad,
                                    MDIO_MMD_AN, MDIO_CTRL1,
                                    BMCR_ANENABLE | BMCR_ANRESTART, 1);

        return err;
}

static int aq100x_advertise(struct cphy *phy, unsigned int advertise_map)
{
        unsigned int adv;
        int err;

        /* 10G advertisement */
        adv = 0;
        if (advertise_map & ADVERTISED_10000baseT_Full)
                adv |= ADV_10G_FULL;
        err = t3_mdio_change_bits(phy, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
                                  ADV_10G_FULL, adv);
        if (err)
                return err;

        /* 1G advertisement */
        adv = 0;
        if (advertise_map & ADVERTISED_1000baseT_Full)
                adv |= ADV_1G_FULL;
        if (advertise_map & ADVERTISED_1000baseT_Half)
                adv |= ADV_1G_HALF;
        err = t3_mdio_change_bits(phy, MDIO_MMD_AN, AQ_1G_CTRL,
                                  ADV_1G_FULL | ADV_1G_HALF, adv);
        if (err)
                return err;

        /* 100M, pause advertisement */
        adv = 0;
        if (advertise_map & ADVERTISED_100baseT_Half)
                adv |= ADVERTISE_100HALF;
        if (advertise_map & ADVERTISED_100baseT_Full)
                adv |= ADVERTISE_100FULL;
        if (advertise_map & ADVERTISED_Pause)
                adv |= ADVERTISE_PAUSE_CAP;
        if (advertise_map & ADVERTISED_Asym_Pause)
                adv |= ADVERTISE_PAUSE_ASYM;
        err = t3_mdio_change_bits(phy, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
                                  0xfe0, adv);

        return err;
}

static int aq100x_set_loopback(struct cphy *phy, int mmd, int dir, int enable)
{
        return mdio_set_flag(&phy->mdio, phy->mdio.prtad,
                             MDIO_MMD_PMAPMD, MDIO_CTRL1,
                             BMCR_LOOPBACK, enable);
}

static int aq100x_set_speed_duplex(struct cphy *phy, int speed, int duplex)
{
        /* no can do */
        return -1;
}

static int aq100x_get_link_status(struct cphy *phy, int *link_ok,
                                  int *speed, int *duplex, int *fc)
{
        int err;
        unsigned int v;

        if (link_ok) {
                err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AQ_LINK_STAT, &v);
                if (err)
                        return err;

                *link_ok = v & 1;
                if (!*link_ok)
                        return 0;
        }

        err = t3_mdio_read(phy, MDIO_MMD_AN, AQ_ANEG_STAT, &v);
        if (err)
                return err;

        if (speed) {
                switch (v & 0x6) {
                case 0x6:
                        *speed = SPEED_10000;
                        break;
                case 0x4:
                        *speed = SPEED_1000;
                        break;
                case 0x2:
                        *speed = SPEED_100;
                        break;
                case 0x0:
                        *speed = SPEED_10;
                        break;
                }
        }

        if (duplex)
                *duplex = v & 1 ? DUPLEX_FULL : DUPLEX_HALF;

        return 0;
}

static const struct cphy_ops aq100x_ops = {
        .reset             = aq100x_reset,
        .intr_enable       = aq100x_intr_enable,
        .intr_disable      = aq100x_intr_disable,
        .intr_clear        = aq100x_intr_clear,
        .intr_handler      = aq100x_intr_handler,
        .autoneg_enable    = aq100x_autoneg_enable,
        .autoneg_restart   = aq100x_autoneg_restart,
        .advertise         = aq100x_advertise,
        .set_loopback      = aq100x_set_loopback,
        .set_speed_duplex  = aq100x_set_speed_duplex,
        .get_link_status   = aq100x_get_link_status,
        .power_down        = aq100x_power_down,
        .mmds              = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
};

int t3_aq100x_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr,
                       const struct mdio_ops *mdio_ops)
{
        unsigned int v, v2, gpio, wait;
        int err;

        cphy_init(phy, adapter, phy_addr, &aq100x_ops, mdio_ops,
                  SUPPORTED_1000baseT_Full | SUPPORTED_10000baseT_Full |
                  SUPPORTED_TP | SUPPORTED_Autoneg | SUPPORTED_AUI,
                  "1000/10GBASE-T");

        /*
         * The PHY has been out of reset ever since the system powered up.  So
         * we do a hard reset over here.
         */
        gpio = phy_addr ? F_GPIO10_OUT_VAL : F_GPIO6_OUT_VAL;
        t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, gpio, 0);
        msleep(1);
        t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, gpio, gpio);

        /*
         * Give it enough time to load the firmware and get ready for mdio.
         */
        msleep(1000);
        wait = 500; /* in 10ms increments */
        do {
                err = t3_mdio_read(phy, MDIO_MMD_VEND1, MDIO_CTRL1, &v);
                if (err || v == 0xffff) {

                        /* Allow prep_adapter to succeed when ffff is read */

                        CH_WARN(adapter, "PHY%d: reset failed (0x%x, 0x%x).\n",
                                phy_addr, err, v);
                        goto done;
                }

                v &= AQ_RESET;
                if (v)
                        msleep(10);
        } while (v && --wait);
        if (v) {
                CH_WARN(adapter, "PHY%d: reset timed out (0x%x).\n",
                        phy_addr, v);

                goto done; /* let prep_adapter succeed */
        }

        /* Datasheet says 3s max but this has been observed */
        wait = (500 - wait) * 10 + 1000;
        if (wait > 3000)
                CH_WARN(adapter, "PHY%d: reset took %ums\n", phy_addr, wait);

        /* Firmware version check. */
        t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_FW_VERSION, &v);
        if (v != 101)
                CH_WARN(adapter, "PHY%d: unsupported firmware %d\n",
                        phy_addr, v);

        /*
         * The PHY should start in really-low-power mode.  Prepare it for normal
         * operations.
         */
        err = t3_mdio_read(phy, MDIO_MMD_VEND1, MDIO_CTRL1, &v);
        if (err)
                return err;
        if (v & AQ_LOWPOWER) {
                err = t3_mdio_change_bits(phy, MDIO_MMD_VEND1, MDIO_CTRL1,
                                          AQ_LOWPOWER, 0);
                if (err)
                        return err;
                msleep(10);
        } else
                CH_WARN(adapter, "PHY%d does not start in low power mode.\n",
                        phy_addr);

        /*
         * Verify XAUI settings, but let prep succeed no matter what.
         */
        v = v2 = 0;
        t3_mdio_read(phy, MDIO_MMD_PHYXS, AQ_XAUI_RX_CFG, &v);
        t3_mdio_read(phy, MDIO_MMD_PHYXS, AQ_XAUI_TX_CFG, &v2);
        if (v != 0x1b || v2 != 0x1b)
                CH_WARN(adapter,
                        "PHY%d: incorrect XAUI settings (0x%x, 0x%x).\n",
                        phy_addr, v, v2);

done:
        return err;
}