/* * Copyright (c) 2004-2008 Chelsio, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef _FIRMWARE_EXPORTS_H_ #define _FIRMWARE_EXPORTS_H_ /* WR OPCODES supported by the firmware. */ #define FW_WROPCODE_FORWARD 0x01 #define FW_WROPCODE_BYPASS 0x05 #define FW_WROPCODE_TUNNEL_TX_PKT 0x03 #define FW_WROPOCDE_ULPTX_DATA_SGL 0x00 #define FW_WROPCODE_ULPTX_MEM_READ 0x02 #define FW_WROPCODE_ULPTX_PKT 0x04 #define FW_WROPCODE_ULPTX_INVALIDATE 0x06 #define FW_WROPCODE_TUNNEL_RX_PKT 0x07 #define FW_WROPCODE_OFLD_GETTCB_RPL 0x08 #define FW_WROPCODE_OFLD_CLOSE_CON 0x09 #define FW_WROPCODE_OFLD_TP_ABORT_CON_REQ 0x0A #define FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL 0x0F #define FW_WROPCODE_OFLD_HOST_ABORT_CON_REQ 0x0B #define FW_WROPCODE_OFLD_TP_ABORT_CON_RPL 0x0C #define FW_WROPCODE_OFLD_TX_DATA 0x0D #define FW_WROPCODE_OFLD_TX_DATA_ACK 0x0E #define FW_WROPCODE_RI_RDMA_INIT 0x10 #define FW_WROPCODE_RI_RDMA_WRITE 0x11 #define FW_WROPCODE_RI_RDMA_READ_REQ 0x12 #define FW_WROPCODE_RI_RDMA_READ_RESP 0x13 #define FW_WROPCODE_RI_SEND 0x14 #define FW_WROPCODE_RI_TERMINATE 0x15 #define FW_WROPCODE_RI_RDMA_READ 0x16 #define FW_WROPCODE_RI_RECEIVE 0x17 #define FW_WROPCODE_RI_BIND_MW 0x18 #define FW_WROPCODE_RI_FASTREGISTER_MR 0x19 #define FW_WROPCODE_RI_LOCAL_INV 0x1A #define FW_WROPCODE_RI_MODIFY_QP 0x1B #define FW_WROPCODE_RI_BYPASS 0x1C #define FW_WROPOCDE_RSVD 0x1E #define FW_WROPCODE_SGE_EGRESSCONTEXT_RR 0x1F #define FW_WROPCODE_MNGT 0x1D #define FW_MNGTOPCODE_PKTSCHED_SET 0x00 /* Maximum size of a WR sent from the host, limited by the SGE. * * Note: WR coming from ULP or TP are only limited by CIM. */ #define FW_WR_SIZE 128 /* Maximum number of outstanding WRs sent from the host. Value must be * programmed in the CTRL/TUNNEL/QP SGE Egress Context and used by * offload modules to limit the number of WRs per connection. */ #define FW_T3_WR_NUM 16 #define FW_N3_WR_NUM 7 #ifndef N3 # define FW_WR_NUM FW_T3_WR_NUM #else # define FW_WR_NUM FW_N3_WR_NUM #endif /* FW_TUNNEL_NUM corresponds to the number of supported TUNNEL Queues. These * queues must start at SGE Egress Context FW_TUNNEL_SGEEC_START and must * start at 'TID' (or 'uP Token') FW_TUNNEL_TID_START. * * Ingress Traffic (e.g. DMA completion credit) for TUNNEL Queue[i] is sent * to RESP Queue[i]. */ #define FW_TUNNEL_NUM 8 #define FW_TUNNEL_SGEEC_START 8 #define FW_TUNNEL_TID_START 65544 /* FW_CTRL_NUM corresponds to the number of supported CTRL Queues. These queues * must start at SGE Egress Context FW_CTRL_SGEEC_START and must start at 'TID' * (or 'uP Token') FW_CTRL_TID_START. * * Ingress Traffic for CTRL Queue[i] is sent to RESP Queue[i]. */ #define FW_CTRL_NUM 8 #define FW_CTRL_SGEEC_START 65528 #define FW_CTRL_TID_START 65536 /* FW_OFLD_NUM corresponds to the number of supported OFFLOAD Queues. These * queues must start at SGE Egress Context FW_OFLD_SGEEC_START. * * Note: the 'uP Token' in the SGE Egress Context fields is irrelevant for * OFFLOAD Queues, as the host is responsible for providing the correct TID in * every WR. * * Ingress Trafffic for OFFLOAD Queue[i] is sent to RESP Queue[i]. */ #define FW_OFLD_NUM 8 #define FW_OFLD_SGEEC_START 0 /* * */ #define FW_RI_NUM 1 #define FW_RI_SGEEC_START 65527 #define FW_RI_TID_START 65552 /* * The RX_PKT_TID */ #define FW_RX_PKT_NUM 1 #define FW_RX_PKT_TID_START 65553 /* FW_WRC_NUM corresponds to the number of Work Request Context that supported * by the firmware. */ #define FW_WRC_NUM \ (65536 + FW_TUNNEL_NUM + FW_CTRL_NUM + FW_RI_NUM + FW_RX_PKT_NUM) /* * FW type and version. */ #define S_FW_VERSION_TYPE 28 #define M_FW_VERSION_TYPE 0xF #define V_FW_VERSION_TYPE(x) ((x) << S_FW_VERSION_TYPE) #define G_FW_VERSION_TYPE(x) \ (((x) >> S_FW_VERSION_TYPE) & M_FW_VERSION_TYPE) #define S_FW_VERSION_MAJOR 16 #define M_FW_VERSION_MAJOR 0xFFF #define V_FW_VERSION_MAJOR(x) ((x) << S_FW_VERSION_MAJOR) #define G_FW_VERSION_MAJOR(x) \ (((x) >> S_FW_VERSION_MAJOR) & M_FW_VERSION_MAJOR) #define S_FW_VERSION_MINOR 8 #define M_FW_VERSION_MINOR 0xFF #define V_FW_VERSION_MINOR(x) ((x) << S_FW_VERSION_MINOR) #define G_FW_VERSION_MINOR(x) \ (((x) >> S_FW_VERSION_MINOR) & M_FW_VERSION_MINOR) #define S_FW_VERSION_MICRO 0 #define M_FW_VERSION_MICRO 0xFF #define V_FW_VERSION_MICRO(x) ((x) << S_FW_VERSION_MICRO) #define G_FW_VERSION_MICRO(x) \ (((x) >> S_FW_VERSION_MICRO) & M_FW_VERSION_MICRO) #endif /* _FIRMWARE_EXPORTS_H_ */
