root/drivers/net/wireless/ath/ath9k/ar9002_hw.c
/*
 * Copyright (c) 2008-2011 Atheros Communications Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#include <linux/moduleparam.h>
#include "hw.h"
#include "ar5008_initvals.h"
#include "ar9001_initvals.h"
#include "ar9002_initvals.h"
#include "ar9002_phy.h"

/* General hardware code for the A5008/AR9001/AR9002 hadware families */

static int ar9002_hw_init_mode_regs(struct ath_hw *ah)
{
        if (AR_SREV_9271(ah)) {
                INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271);
                INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271);
                INIT_INI_ARRAY(&ah->iniModes_9271_ANI_reg, ar9271Modes_9271_ANI_reg);
                return 0;
        }

        INIT_INI_ARRAY(&ah->iniPcieSerdes,
                       ar9280PciePhy_clkreq_always_on_L1_9280);

        if (AR_SREV_9287_11_OR_LATER(ah)) {
                INIT_INI_ARRAY(&ah->iniModes, ar9287Modes_9287_1_1);
                INIT_INI_ARRAY(&ah->iniCommon, ar9287Common_9287_1_1);
        } else if (AR_SREV_9285_12_OR_LATER(ah)) {
                INIT_INI_ARRAY(&ah->iniModes, ar9285Modes_9285_1_2);
                INIT_INI_ARRAY(&ah->iniCommon, ar9285Common_9285_1_2);
        } else if (AR_SREV_9280_20_OR_LATER(ah)) {
                INIT_INI_ARRAY(&ah->iniModes, ar9280Modes_9280_2);
                INIT_INI_ARRAY(&ah->iniCommon, ar9280Common_9280_2);

                INIT_INI_ARRAY(&ah->iniModesFastClock,
                               ar9280Modes_fast_clock_9280_2);
        } else if (AR_SREV_9160_10_OR_LATER(ah)) {
                INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9160);
                INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9160);
                if (AR_SREV_9160_11(ah)) {
                        INIT_INI_ARRAY(&ah->iniAddac,
                                       ar5416Addac_9160_1_1);
                } else {
                        INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9160);
                }
        } else if (AR_SREV_9100_OR_LATER(ah)) {
                INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9100);
                INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9100);
                INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9100);
        } else {
                INIT_INI_ARRAY(&ah->iniModes, ar5416Modes);
                INIT_INI_ARRAY(&ah->iniCommon, ar5416Common);
                INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac);
        }

        if (!AR_SREV_9280_20_OR_LATER(ah)) {
                /* Common for AR5416, AR913x, AR9160 */
                INIT_INI_ARRAY(&ah->iniBB_RfGain, ar5416BB_RfGain);

                /* Common for AR913x, AR9160 */
                if (!AR_SREV_5416(ah))
                        INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6TPC_9100);
                else
                        INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6TPC);
        }

        /* iniAddac needs to be modified for these chips */
        if (AR_SREV_9160(ah) || !AR_SREV_5416_22_OR_LATER(ah)) {
                struct ar5416IniArray *addac = &ah->iniAddac;
                u32 n = addac->ia_rows * addac->ia_columns;
                u32 *data;

                data = devm_kmemdup_array(ah->dev, addac->ia_array, n, sizeof(u32),
                        GFP_KERNEL);
                if (!data)
                        return -ENOMEM;

                addac->ia_array = data;

                if (!AR_SREV_5416_22_OR_LATER(ah)) {
                        /* override CLKDRV value */
                        INI_RA(addac, 31,1) = 0;
                }
        }
        if (AR_SREV_9287_11_OR_LATER(ah)) {
                INIT_INI_ARRAY(&ah->iniCckfirNormal,
                       ar9287Common_normal_cck_fir_coeff_9287_1_1);
                INIT_INI_ARRAY(&ah->iniCckfirJapan2484,
                       ar9287Common_japan_2484_cck_fir_coeff_9287_1_1);
        }
        return 0;
}

static void ar9280_20_hw_init_rxgain_ini(struct ath_hw *ah)
{
        u32 rxgain_type;

        if (ah->eep_ops->get_eeprom_rev(ah) >= AR5416_EEP_MINOR_VER_17) {
                rxgain_type = ah->eep_ops->get_eeprom(ah, EEP_RXGAIN_TYPE);

                if (rxgain_type == AR5416_EEP_RXGAIN_13DB_BACKOFF)
                        INIT_INI_ARRAY(&ah->iniModesRxGain,
                                       ar9280Modes_backoff_13db_rxgain_9280_2);
                else if (rxgain_type == AR5416_EEP_RXGAIN_23DB_BACKOFF)
                        INIT_INI_ARRAY(&ah->iniModesRxGain,
                                       ar9280Modes_backoff_23db_rxgain_9280_2);
                else
                        INIT_INI_ARRAY(&ah->iniModesRxGain,
                                       ar9280Modes_original_rxgain_9280_2);
        } else {
                INIT_INI_ARRAY(&ah->iniModesRxGain,
                               ar9280Modes_original_rxgain_9280_2);
        }
}

static void ar9280_20_hw_init_txgain_ini(struct ath_hw *ah, u32 txgain_type)
{
        if (ah->eep_ops->get_eeprom_rev(ah) >= AR5416_EEP_MINOR_VER_19) {
                if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER)
                        INIT_INI_ARRAY(&ah->iniModesTxGain,
                                       ar9280Modes_high_power_tx_gain_9280_2);
                else
                        INIT_INI_ARRAY(&ah->iniModesTxGain,
                                       ar9280Modes_original_tx_gain_9280_2);
        } else {
                INIT_INI_ARRAY(&ah->iniModesTxGain,
                               ar9280Modes_original_tx_gain_9280_2);
        }
}

static void ar9271_hw_init_txgain_ini(struct ath_hw *ah, u32 txgain_type)
{
        if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER)
                INIT_INI_ARRAY(&ah->iniModesTxGain,
                               ar9271Modes_high_power_tx_gain_9271);
        else
                INIT_INI_ARRAY(&ah->iniModesTxGain,
                               ar9271Modes_normal_power_tx_gain_9271);
}

static void ar9002_hw_init_mode_gain_regs(struct ath_hw *ah)
{
        u32 txgain_type = ah->eep_ops->get_eeprom(ah, EEP_TXGAIN_TYPE);

        if (AR_SREV_9287_11_OR_LATER(ah))
                INIT_INI_ARRAY(&ah->iniModesRxGain,
                               ar9287Modes_rx_gain_9287_1_1);
        else if (AR_SREV_9280_20(ah))
                ar9280_20_hw_init_rxgain_ini(ah);

        if (AR_SREV_9271(ah)) {
                ar9271_hw_init_txgain_ini(ah, txgain_type);
        } else if (AR_SREV_9287_11_OR_LATER(ah)) {
                INIT_INI_ARRAY(&ah->iniModesTxGain,
                               ar9287Modes_tx_gain_9287_1_1);
        } else if (AR_SREV_9280_20(ah)) {
                ar9280_20_hw_init_txgain_ini(ah, txgain_type);
        } else if (AR_SREV_9285_12_OR_LATER(ah)) {
                /* txgain table */
                if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER) {
                        if (AR_SREV_9285E_20(ah)) {
                                INIT_INI_ARRAY(&ah->iniModesTxGain,
                                               ar9285Modes_XE2_0_high_power);
                        } else {
                                INIT_INI_ARRAY(&ah->iniModesTxGain,
                                        ar9285Modes_high_power_tx_gain_9285_1_2);
                        }
                } else {
                        if (AR_SREV_9285E_20(ah)) {
                                INIT_INI_ARRAY(&ah->iniModesTxGain,
                                               ar9285Modes_XE2_0_normal_power);
                        } else {
                                INIT_INI_ARRAY(&ah->iniModesTxGain,
                                        ar9285Modes_original_tx_gain_9285_1_2);
                        }
                }
        }
}

/*
 * Helper for ASPM support.
 *
 * Disable PLL when in L0s as well as receiver clock when in L1.
 * This power saving option must be enabled through the SerDes.
 *
 * Programming the SerDes must go through the same 288 bit serial shift
 * register as the other analog registers.  Hence the 9 writes.
 */
static void ar9002_hw_configpcipowersave(struct ath_hw *ah,
                                         bool power_off)
{
        u8 i;
        u32 val;

        /* Nothing to do on restore for 11N */
        if (!power_off /* !restore */) {
                if (AR_SREV_9280_20_OR_LATER(ah)) {
                        /*
                         * AR9280 2.0 or later chips use SerDes values from the
                         * initvals.h initialized depending on chipset during
                         * __ath9k_hw_init()
                         */
                        for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
                                REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
                                          INI_RA(&ah->iniPcieSerdes, i, 1));
                        }
                } else {
                        ENABLE_REGWRITE_BUFFER(ah);

                        REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
                        REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);

                        /* RX shut off when elecidle is asserted */
                        REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
                        REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
                        REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);

                        /*
                         * Ignore ah->ah_config.pcie_clock_req setting for
                         * pre-AR9280 11n
                         */
                        REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);

                        REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
                        REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
                        REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);

                        /* Load the new settings */
                        REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);

                        REGWRITE_BUFFER_FLUSH(ah);
                }

                udelay(1000);
        }

        if (power_off) {
                /* clear bit 19 to disable L1 */
                REG_CLR_BIT(ah, AR_PCIE_PM_CTRL(ah), AR_PCIE_PM_CTRL_ENA);

                val = REG_READ(ah, AR_WA(ah));

                /*
                 * Set PCIe workaround bits
                 * In AR9280 and AR9285, bit 14 in WA register (disable L1)
                 * should only  be set when device enters D3 and be
                 * cleared when device comes back to D0.
                 */
                if (ah->config.pcie_waen) {
                        if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
                                val |= AR_WA_D3_L1_DISABLE;
                } else {
                        if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah)) {
                                if (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)
                                        val |= AR_WA_D3_L1_DISABLE;
                        } else if (AR_SREV_9280(ah)) {
                                if (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE)
                                        val |= AR_WA_D3_L1_DISABLE;
                        }
                }

                if (AR_SREV_9280(ah) || AR_SREV_9285(ah) || AR_SREV_9287(ah)) {
                        /*
                         * Disable bit 6 and 7 before entering D3 to
                         * prevent system hang.
                         */
                        val &= ~(AR_WA_BIT6 | AR_WA_BIT7);
                }

                if (AR_SREV_9280(ah))
                        val |= AR_WA_BIT22;

                if (AR_SREV_9285E_20(ah))
                        val |= AR_WA_BIT23;

                REG_WRITE(ah, AR_WA(ah), val);
        } else {
                if (ah->config.pcie_waen) {
                        val = ah->config.pcie_waen;
                        val &= (~AR_WA_D3_L1_DISABLE);
                } else {
                        if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah)) {
                                val = AR9285_WA_DEFAULT;
                                val &= (~AR_WA_D3_L1_DISABLE);
                        } else if (AR_SREV_9280(ah)) {
                                /*
                                 * For AR9280 chips, bit 22 of 0x4004
                                 * needs to be set.
                                 */
                                val = AR9280_WA_DEFAULT;
                                val &= (~AR_WA_D3_L1_DISABLE);
                        } else {
                                val = AR_WA_DEFAULT;
                        }
                }

                /* WAR for ASPM system hang */
                if (AR_SREV_9285(ah) || AR_SREV_9287(ah))
                        val |= (AR_WA_BIT6 | AR_WA_BIT7);

                if (AR_SREV_9285E_20(ah))
                        val |= AR_WA_BIT23;

                REG_WRITE(ah, AR_WA(ah), val);

                /* set bit 19 to allow forcing of pcie core into L1 state */
                REG_SET_BIT(ah, AR_PCIE_PM_CTRL(ah), AR_PCIE_PM_CTRL_ENA);
        }
}

static int ar9002_hw_get_radiorev(struct ath_hw *ah)
{
        u32 val;
        int i;

        ENABLE_REGWRITE_BUFFER(ah);

        REG_WRITE(ah, AR_PHY(0x36), 0x00007058);
        for (i = 0; i < 8; i++)
                REG_WRITE(ah, AR_PHY(0x20), 0x00010000);

        REGWRITE_BUFFER_FLUSH(ah);

        val = (REG_READ(ah, AR_PHY(256)) >> 24) & 0xff;
        val = ((val & 0xf0) >> 4) | ((val & 0x0f) << 4);

        return ath9k_hw_reverse_bits(val, 8);
}

int ar9002_hw_rf_claim(struct ath_hw *ah)
{
        u32 val;

        REG_WRITE(ah, AR_PHY(0), 0x00000007);

        val = ar9002_hw_get_radiorev(ah);
        switch (val & AR_RADIO_SREV_MAJOR) {
        case 0:
                val = AR_RAD5133_SREV_MAJOR;
                break;
        case AR_RAD5133_SREV_MAJOR:
        case AR_RAD5122_SREV_MAJOR:
        case AR_RAD2133_SREV_MAJOR:
        case AR_RAD2122_SREV_MAJOR:
                break;
        default:
                ath_err(ath9k_hw_common(ah),
                        "Radio Chip Rev 0x%02X not supported\n",
                        val & AR_RADIO_SREV_MAJOR);
                return -EOPNOTSUPP;
        }

        ah->hw_version.analog5GhzRev = val;

        return 0;
}

void ar9002_hw_enable_async_fifo(struct ath_hw *ah)
{
        if (AR_SREV_9287_13_OR_LATER(ah)) {
                REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
                                AR_MAC_PCU_ASYNC_FIFO_REG3_DATAPATH_SEL);
                REG_SET_BIT(ah, AR_PHY_MODE, AR_PHY_MODE_ASYNCFIFO);
                REG_CLR_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
                                AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
                REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
                                AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
        }
}

static void ar9002_hw_init_hang_checks(struct ath_hw *ah)
{
        if (AR_SREV_9100(ah) || AR_SREV_9160(ah)) {
                ah->config.hw_hang_checks |= HW_BB_RIFS_HANG;
                ah->config.hw_hang_checks |= HW_BB_DFS_HANG;
        }

        if (AR_SREV_9280(ah))
                ah->config.hw_hang_checks |= HW_BB_RX_CLEAR_STUCK_HANG;

        if (AR_SREV_5416(ah) || AR_SREV_9100(ah) || AR_SREV_9160(ah))
                ah->config.hw_hang_checks |= HW_MAC_HANG;
}

/* Sets up the AR5008/AR9001/AR9002 hardware family callbacks */
int ar9002_hw_attach_ops(struct ath_hw *ah)
{
        struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
        struct ath_hw_ops *ops = ath9k_hw_ops(ah);
        int ret;

        ret = ar9002_hw_init_mode_regs(ah);
        if (ret)
                return ret;

        priv_ops->init_mode_gain_regs = ar9002_hw_init_mode_gain_regs;
        priv_ops->init_hang_checks = ar9002_hw_init_hang_checks;

        ops->config_pci_powersave = ar9002_hw_configpcipowersave;

        ret = ar5008_hw_attach_phy_ops(ah);
        if (ret)
                return ret;

        if (AR_SREV_9280_20_OR_LATER(ah))
                ar9002_hw_attach_phy_ops(ah);

        ar9002_hw_attach_calib_ops(ah);
        ar9002_hw_attach_mac_ops(ah);
        return 0;
}

void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan)
{
        u32 modesIndex;
        int i;

        if (IS_CHAN_5GHZ(chan))
                modesIndex = IS_CHAN_HT40(chan) ? 2 : 1;
        else
                modesIndex = IS_CHAN_HT40(chan) ? 3 : 4;

        ENABLE_REGWRITE_BUFFER(ah);

        for (i = 0; i < ah->iniModes_9271_ANI_reg.ia_rows; i++) {
                u32 reg = INI_RA(&ah->iniModes_9271_ANI_reg, i, 0);
                u32 val = INI_RA(&ah->iniModes_9271_ANI_reg, i, modesIndex);
                u32 val_orig;

                if (reg == AR_PHY_CCK_DETECT) {
                        val_orig = REG_READ(ah, reg);
                        val &= AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK;
                        val_orig &= ~AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK;

                        REG_WRITE(ah, reg, val|val_orig);
                } else
                        REG_WRITE(ah, reg, val);
        }

        REGWRITE_BUFFER_FLUSH(ah);
}