/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * This file is part of wl12xx
 *
 * Copyright (C) 2011 Texas Instruments Inc.
 */

#ifndef __WL12XX_CONF_H__
#define __WL12XX_CONF_H__

/* these are number of channels on the band divided by two, rounded up */
#define CONF_TX_PWR_COMPENSATION_LEN_2 7
#define CONF_TX_PWR_COMPENSATION_LEN_5 18

struct wl12xx_conf_rf {
        /*
         * Per channel power compensation for 2.4GHz
         *
         * Range: s8
         */
        u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];

        /*
         * Per channel power compensation for 5GHz
         *
         * Range: s8
         */
        u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
};

struct wl12xx_priv_conf {
        struct wl12xx_conf_rf rf;
        struct conf_memory_settings mem_wl127x;
};

enum wl12xx_sg_params {
        /*
        * Configure the min and max time BT gains the antenna
        * in WLAN / BT master basic rate
        *
        * Range: 0 - 255 (ms)
        */
        WL12XX_CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
        WL12XX_CONF_SG_ACL_BT_MASTER_MAX_BR,

        /*
        * Configure the min and max time BT gains the antenna
        * in WLAN / BT slave basic rate
        *
        * Range: 0 - 255 (ms)
        */
        WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_BR,
        WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_BR,

        /*
        * Configure the min and max time BT gains the antenna
        * in WLAN / BT master EDR
        *
        * Range: 0 - 255 (ms)
        */
        WL12XX_CONF_SG_ACL_BT_MASTER_MIN_EDR,
        WL12XX_CONF_SG_ACL_BT_MASTER_MAX_EDR,

        /*
        * Configure the min and max time BT gains the antenna
        * in WLAN / BT slave EDR
        *
        * Range: 0 - 255 (ms)
        */
        WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_EDR,
        WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_EDR,

        /*
        * The maximum time WLAN can gain the antenna
        * in WLAN PSM / BT master/slave BR
        *
        * Range: 0 - 255 (ms)
        */
        WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_BR,
        WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_BR,

        /*
        * The maximum time WLAN can gain the antenna
        * in WLAN PSM / BT master/slave EDR
        *
        * Range: 0 - 255 (ms)
        */
        WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_EDR,
        WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_EDR,

        /* TODO: explain these values */
        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
        WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,

        WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
        WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
        WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
        WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
        WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
        WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,

        /*
        * Compensation percentage of probe requests when scan initiated
        * during BT voice/ACL link.
        *
        * Range: 0 - 255 (%)
        */
        WL12XX_CONF_SG_AUTO_SCAN_PROBE_REQ,

        /*
        * Compensation percentage of probe requests when active scan initiated
        * during BT voice
        *
        * Range: 0 - 255 (%)
        */
        WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,

        /*
        * Compensation percentage of WLAN active scan window if initiated
        * during BT A2DP
        *
        * Range: 0 - 1000 (%)
        */
        WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,

        /*
        * Compensation percentage of WLAN passive scan window if initiated
        * during BT A2DP BR
        *
        * Range: 0 - 1000 (%)
        */
        WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_BR,

        /*
        * Compensation percentage of WLAN passive scan window if initiated
        * during BT A2DP EDR
        *
        * Range: 0 - 1000 (%)
        */
        WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_EDR,

        /*
        * Compensation percentage of WLAN passive scan window if initiated
        * during BT voice
        *
        * Range: 0 - 1000 (%)
        */
        WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_HV3,

        /* TODO: explain these values */
        WL12XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
        WL12XX_CONF_SG_BCN_HV3_COLL_THR_IN_PASSIVE_SCAN,
        WL12XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN,

        /*
        * Defines whether the SG will force WLAN host to enter/exit PSM
        *
        * Range: 1 - SG can force, 0 - host handles PSM
        */
        WL12XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO,

        /*
        * Defines antenna configuration (single/dual antenna)
        *
        * Range: 0 - single antenna, 1 - dual antenna
        */
        WL12XX_CONF_SG_ANTENNA_CONFIGURATION,

        /*
        * The threshold (percent) of max consecutive beacon misses before
        * increasing priority of beacon reception.
        *
        * Range: 0 - 100 (%)
        */
        WL12XX_CONF_SG_BEACON_MISS_PERCENT,

        /*
        * Protection time of the DHCP procedure.
        *
        * Range: 0 - 100000 (ms)
        */
        WL12XX_CONF_SG_DHCP_TIME,

        /*
        * RX guard time before the beginning of a new BT voice frame during
        * which no new WLAN trigger frame is transmitted.
        *
        * Range: 0 - 100000 (us)
        */
        WL12XX_CONF_SG_RXT,

        /*
        * TX guard time before the beginning of a new BT voice frame during
        * which no new WLAN frame is transmitted.
        *
        * Range: 0 - 100000 (us)
        */
        WL12XX_CONF_SG_TXT,

        /*
        * Enable adaptive RXT/TXT algorithm. If disabled, the host values
        * will be utilized.
        *
        * Range: 0 - disable, 1 - enable
        */
        WL12XX_CONF_SG_ADAPTIVE_RXT_TXT,

        /* TODO: explain this value */
        WL12XX_CONF_SG_GENERAL_USAGE_BIT_MAP,

        /*
        * Number of consecutive BT voice frames not interrupted by WLAN
        *
        * Range: 0 - 100
        */
        WL12XX_CONF_SG_HV3_MAX_SERVED,

        /*
        * The used WLAN legacy service period during active BT ACL link
        *
        * Range: 0 - 255 (ms)
        */
        WL12XX_CONF_SG_PS_POLL_TIMEOUT,

        /*
        * The used WLAN UPSD service period during active BT ACL link
        *
        * Range: 0 - 255 (ms)
        */
        WL12XX_CONF_SG_UPSD_TIMEOUT,

        WL12XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
        WL12XX_CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
        WL12XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME,

        /* AP params */
        WL12XX_CONF_AP_BEACON_MISS_TX,
        WL12XX_CONF_AP_RX_WINDOW_AFTER_BEACON,
        WL12XX_CONF_AP_BEACON_WINDOW_INTERVAL,
        WL12XX_CONF_AP_CONNECTION_PROTECTION_TIME,
        WL12XX_CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
        WL12XX_CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,

        /* CTS Diluting params */
        WL12XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
        WL12XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,

        WL12XX_CONF_SG_TEMP_PARAM_1,
        WL12XX_CONF_SG_TEMP_PARAM_2,
        WL12XX_CONF_SG_TEMP_PARAM_3,
        WL12XX_CONF_SG_TEMP_PARAM_4,
        WL12XX_CONF_SG_TEMP_PARAM_5,
        WL12XX_CONF_SG_TEMP_PARAM_6,
        WL12XX_CONF_SG_TEMP_PARAM_7,
        WL12XX_CONF_SG_TEMP_PARAM_8,
        WL12XX_CONF_SG_TEMP_PARAM_9,
        WL12XX_CONF_SG_TEMP_PARAM_10,

        WL12XX_CONF_SG_PARAMS_MAX,
        WL12XX_CONF_SG_PARAMS_ALL = 0xff
};

#endif /* __WL12XX_CONF_H__ */