// SPDX-License-Identifier: ISC /* * Copyright (c) 2012 Broadcom Corporation */ #ifndef FWIL_TYPES_H_ #define FWIL_TYPES_H_ #include <linux/if_ether.h> #define BRCMF_FIL_ACTION_FRAME_SIZE 1800 /* ARP Offload feature flags for arp_ol iovar */ #define BRCMF_ARP_OL_AGENT 0x00000001 #define BRCMF_ARP_OL_SNOOP 0x00000002 #define BRCMF_ARP_OL_HOST_AUTO_REPLY 0x00000004 #define BRCMF_ARP_OL_PEER_AUTO_REPLY 0x00000008 #define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */ #define BRCMF_BSS_RSSI_ON_CHANNEL 0x0004 #define BRCMF_STA_BRCM 0x00000001 /* Running a Broadcom driver */ #define BRCMF_STA_WME 0x00000002 /* WMM association */ #define BRCMF_STA_NONERP 0x00000004 /* No ERP */ #define BRCMF_STA_AUTHE 0x00000008 /* Authenticated */ #define BRCMF_STA_ASSOC 0x00000010 /* Associated */ #define BRCMF_STA_AUTHO 0x00000020 /* Authorized */ #define BRCMF_STA_WDS 0x00000040 /* Wireless Distribution System */ #define BRCMF_STA_WDS_LINKUP 0x00000080 /* WDS traffic/probes flowing properly */ #define BRCMF_STA_PS 0x00000100 /* STA is in power save mode from AP's viewpoint */ #define BRCMF_STA_APSD_BE 0x00000200 /* APSD delv/trigger for AC_BE is default enabled */ #define BRCMF_STA_APSD_BK 0x00000400 /* APSD delv/trigger for AC_BK is default enabled */ #define BRCMF_STA_APSD_VI 0x00000800 /* APSD delv/trigger for AC_VI is default enabled */ #define BRCMF_STA_APSD_VO 0x00001000 /* APSD delv/trigger for AC_VO is default enabled */ #define BRCMF_STA_N_CAP 0x00002000 /* STA 802.11n capable */ #define BRCMF_STA_SCBSTATS 0x00004000 /* Per STA debug stats */ #define BRCMF_STA_AMPDU_CAP 0x00008000 /* STA AMPDU capable */ #define BRCMF_STA_AMSDU_CAP 0x00010000 /* STA AMSDU capable */ #define BRCMF_STA_MIMO_PS 0x00020000 /* mimo ps mode is enabled */ #define BRCMF_STA_MIMO_RTS 0x00040000 /* send rts in mimo ps mode */ #define BRCMF_STA_RIFS_CAP 0x00080000 /* rifs enabled */ #define BRCMF_STA_VHT_CAP 0x00100000 /* STA VHT(11ac) capable */ #define BRCMF_STA_WPS 0x00200000 /* WPS state */ #define BRCMF_STA_DWDS_CAP 0x01000000 /* DWDS CAP */ #define BRCMF_STA_DWDS 0x02000000 /* DWDS active */ /* size of brcmf_scan_params not including variable length array */ #define BRCMF_SCAN_PARAMS_FIXED_SIZE 64 #define BRCMF_SCAN_PARAMS_V2_FIXED_SIZE 72 /* version of brcmf_scan_params structure */ #define BRCMF_SCAN_PARAMS_VERSION_V2 2 /* masks for channel and ssid count */ #define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff #define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16 /* scan type definitions */ #define BRCMF_SCANTYPE_DEFAULT 0xFF #define BRCMF_SCANTYPE_ACTIVE 0 #define BRCMF_SCANTYPE_PASSIVE 1 #define BRCMF_WSEC_MAX_PSK_LEN 32 #define BRCMF_WSEC_PASSPHRASE BIT(0) #define BRCMF_WSEC_MAX_SAE_PASSWORD_LEN 128 /* primary (ie tx) key */ #define BRCMF_PRIMARY_KEY (1 << 1) #define DOT11_BSSTYPE_ANY 2 #define BRCMF_ESCAN_REQ_VERSION 1 #define BRCMF_ESCAN_REQ_VERSION_V2 2 #define BRCMF_MAXRATES_IN_SET 16 /* max # of rates in rateset */ /* OBSS Coex Auto/On/Off */ #define BRCMF_OBSS_COEX_AUTO (-1) #define BRCMF_OBSS_COEX_OFF 0 #define BRCMF_OBSS_COEX_ON 1 /* WOWL bits */ /* Wakeup on Magic packet: */ #define BRCMF_WOWL_MAGIC (1 << 0) /* Wakeup on Netpattern */ #define BRCMF_WOWL_NET (1 << 1) /* Wakeup on loss-of-link due to Disassoc/Deauth: */ #define BRCMF_WOWL_DIS (1 << 2) /* Wakeup on retrograde TSF: */ #define BRCMF_WOWL_RETR (1 << 3) /* Wakeup on loss of beacon: */ #define BRCMF_WOWL_BCN (1 << 4) /* Wakeup after test: */ #define BRCMF_WOWL_TST (1 << 5) /* Wakeup after PTK refresh: */ #define BRCMF_WOWL_M1 (1 << 6) /* Wakeup after receipt of EAP-Identity Req: */ #define BRCMF_WOWL_EAPID (1 << 7) /* Wakeind via PME(0) or GPIO(1): */ #define BRCMF_WOWL_PME_GPIO (1 << 8) /* need tkip phase 1 key to be updated by the driver: */ #define BRCMF_WOWL_NEEDTKIP1 (1 << 9) /* enable wakeup if GTK fails: */ #define BRCMF_WOWL_GTK_FAILURE (1 << 10) /* support extended magic packets: */ #define BRCMF_WOWL_EXTMAGPAT (1 << 11) /* support ARP/NS/keepalive offloading: */ #define BRCMF_WOWL_ARPOFFLOAD (1 << 12) /* read protocol version for EAPOL frames: */ #define BRCMF_WOWL_WPA2 (1 << 13) /* If the bit is set, use key rotaton: */ #define BRCMF_WOWL_KEYROT (1 << 14) /* If the bit is set, frm received was bcast frame: */ #define BRCMF_WOWL_BCAST (1 << 15) /* If the bit is set, scan offload is enabled: */ #define BRCMF_WOWL_SCANOL (1 << 16) /* Wakeup on tcpkeep alive timeout: */ #define BRCMF_WOWL_TCPKEEP_TIME (1 << 17) /* Wakeup on mDNS Conflict Resolution: */ #define BRCMF_WOWL_MDNS_CONFLICT (1 << 18) /* Wakeup on mDNS Service Connect: */ #define BRCMF_WOWL_MDNS_SERVICE (1 << 19) /* tcp keepalive got data: */ #define BRCMF_WOWL_TCPKEEP_DATA (1 << 20) /* Firmware died in wowl mode: */ #define BRCMF_WOWL_FW_HALT (1 << 21) /* Enable detection of radio button changes: */ #define BRCMF_WOWL_ENAB_HWRADIO (1 << 22) /* Offloads detected MIC failure(s): */ #define BRCMF_WOWL_MIC_FAIL (1 << 23) /* Wakeup in Unassociated state (Net/Magic Pattern): */ #define BRCMF_WOWL_UNASSOC (1 << 24) /* Wakeup if received matched secured pattern: */ #define BRCMF_WOWL_SECURE (1 << 25) /* Wakeup on finding preferred network */ #define BRCMF_WOWL_PFN_FOUND (1 << 27) /* Wakeup on receiving pairwise key EAP packets: */ #define WIPHY_WOWL_EAP_PK (1 << 28) /* Link Down indication in WoWL mode: */ #define BRCMF_WOWL_LINKDOWN (1 << 31) #define BRCMF_WOWL_MAXPATTERNS 16 #define BRCMF_WOWL_MAXPATTERNSIZE 128 #define BRCMF_COUNTRY_BUF_SZ 4 #define BRCMF_ANT_MAX 4 #define BRCMF_MAX_ASSOCLIST 128 #define BRCMF_TXBF_SU_BFE_CAP BIT(0) #define BRCMF_TXBF_MU_BFE_CAP BIT(1) #define BRCMF_TXBF_SU_BFR_CAP BIT(0) #define BRCMF_TXBF_MU_BFR_CAP BIT(1) #define BRCMF_MAXPMKID 16 /* max # PMKID cache entries */ #define BRCMF_NUMCHANNELS 64 #define BRCMF_PFN_MACADDR_CFG_VER 1 #define BRCMF_PFN_MAC_OUI_ONLY BIT(0) #define BRCMF_PFN_SET_MAC_UNASSOC BIT(1) #define BRCMF_MCSSET_LEN 16 #define BRCMF_RSN_KCK_LENGTH 16 #define BRCMF_RSN_KEK_LENGTH 16 #define BRCMF_RSN_REPLAY_LEN 8 #define BRCMF_MFP_NONE 0 #define BRCMF_MFP_CAPABLE 1 #define BRCMF_MFP_REQUIRED 2 #define BRCMF_VHT_CAP_MCS_MAP_NSS_MAX 8 #define BRCMF_HE_CAP_MCS_MAP_NSS_MAX 8 #define BRCMF_PMKSA_VER_2 2 #define BRCMF_PMKSA_VER_3 3 #define BRCMF_PMKSA_NO_EXPIRY 0xffffffff /* MAX_CHUNK_LEN is the maximum length for data passing to firmware in each * ioctl. It is relatively small because firmware has small maximum size input * playload restriction for ioctls. */ #define MAX_CHUNK_LEN 1400 #define DLOAD_HANDLER_VER 1 /* Downloader version */ #define DLOAD_FLAG_VER_MASK 0xf000 /* Downloader version mask */ #define DLOAD_FLAG_VER_SHIFT 12 /* Downloader version shift */ #define DL_BEGIN 0x0002 #define DL_END 0x0004 #define DL_TYPE_CLM 2 /* join preference types for join_pref iovar */ enum brcmf_join_pref_types { BRCMF_JOIN_PREF_RSSI = 1, BRCMF_JOIN_PREF_WPA, BRCMF_JOIN_PREF_BAND, BRCMF_JOIN_PREF_RSSI_DELTA, }; enum brcmf_fil_p2p_if_types { BRCMF_FIL_P2P_IF_CLIENT, BRCMF_FIL_P2P_IF_GO, BRCMF_FIL_P2P_IF_DYNBCN_GO, BRCMF_FIL_P2P_IF_DEV, }; enum brcmf_wowl_pattern_type { BRCMF_WOWL_PATTERN_TYPE_BITMAP = 0, BRCMF_WOWL_PATTERN_TYPE_ARP, BRCMF_WOWL_PATTERN_TYPE_NA }; struct brcmf_fil_p2p_if_le { u8 addr[ETH_ALEN]; __le16 type; __le16 chspec; }; struct brcmf_fil_chan_info_le { __le32 hw_channel; __le32 target_channel; __le32 scan_channel; }; struct brcmf_fil_action_frame_le { u8 da[ETH_ALEN]; __le16 len; __le32 packet_id; u8 data[BRCMF_FIL_ACTION_FRAME_SIZE]; }; struct brcmf_fil_af_params_le { __le32 channel; __le32 dwell_time; u8 bssid[ETH_ALEN]; u8 pad[2]; struct brcmf_fil_action_frame_le action_frame; }; struct brcmf_fil_bss_enable_le { __le32 bsscfgidx; __le32 enable; }; struct brcmf_fil_bwcap_le { __le32 band; __le32 bw_cap; }; /** * struct tdls_iovar - common structure for tdls iovars. * * @ea: ether address of peer station. * @mode: mode value depending on specific tdls iovar. * @chanspec: channel specification. * @pad: unused (for future use). */ struct brcmf_tdls_iovar_le { u8 ea[ETH_ALEN]; /* Station address */ u8 mode; /* mode: depends on iovar */ __le16 chanspec; __le32 pad; /* future */ }; enum brcmf_tdls_manual_ep_ops { BRCMF_TDLS_MANUAL_EP_CREATE = 1, BRCMF_TDLS_MANUAL_EP_DELETE = 3, BRCMF_TDLS_MANUAL_EP_DISCOVERY = 6 }; /* Pattern matching filter. Specifies an offset within received packets to * start matching, the pattern to match, the size of the pattern, and a bitmask * that indicates which bits within the pattern should be matched. */ struct brcmf_pkt_filter_pattern_le { /* * Offset within received packet to start pattern matching. * Offset '0' is the first byte of the ethernet header. */ __le32 offset; /* Size of the pattern. Bitmask must be the same size.*/ __le32 size_bytes; /* * Variable length mask and pattern data. mask starts at offset 0. * Pattern immediately follows mask. */ u8 mask_and_pattern[1]; }; /* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */ struct brcmf_pkt_filter_le { __le32 id; /* Unique filter id, specified by app. */ __le32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */ __le32 negate_match; /* Negate the result of filter matches */ union { /* Filter definitions */ struct brcmf_pkt_filter_pattern_le pattern; /* Filter pattern */ } u; }; /* IOVAR "pkt_filter_enable" parameter. */ struct brcmf_pkt_filter_enable_le { __le32 id; /* Unique filter id */ __le32 enable; /* Enable/disable bool */ }; /* BSS info structure * Applications MUST CHECK ie_offset field and length field to access IEs and * next bss_info structure in a vector (in struct brcmf_scan_results) */ struct brcmf_bss_info_le { __le32 version; /* version field */ __le32 length; /* byte length of data in this record, * starting at version and including IEs */ u8 BSSID[ETH_ALEN]; __le16 beacon_period; /* units are Kusec */ __le16 capability; /* Capability information */ u8 SSID_len; u8 SSID[32]; struct { __le32 count; /* # rates in this set */ u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ } rateset; /* supported rates */ __le16 chanspec; /* chanspec for bss */ __le16 atim_window; /* units are Kusec */ u8 dtim_period; /* DTIM period */ __le16 RSSI; /* receive signal strength (in dBm) */ s8 phy_noise; /* noise (in dBm) */ u8 n_cap; /* BSS is 802.11N Capable */ /* 802.11N BSS Capabilities (based on HT_CAP_*): */ __le32 nbss_cap; u8 ctl_ch; /* 802.11N BSS control channel number */ __le32 reserved32[1]; /* Reserved for expansion of BSS properties */ u8 flags; /* flags */ u8 reserved[3]; /* Reserved for expansion of BSS properties */ u8 basic_mcs[BRCMF_MCSSET_LEN]; /* 802.11N BSS required MCS set */ __le16 ie_offset; /* offset at which IEs start, from beginning */ __le32 ie_length; /* byte length of Information Elements */ __le16 SNR; /* average SNR of during frame reception */ /* Add new fields here */ /* variable length Information Elements */ }; struct brcm_rateset_le { /* # rates in this set */ __le32 count; /* rates in 500kbps units w/hi bit set if basic */ u8 rates[BRCMF_MAXRATES_IN_SET]; }; struct brcmf_ssid_le { __le32 SSID_len; unsigned char SSID[IEEE80211_MAX_SSID_LEN]; }; /* Alternate SSID structure used in some places... */ struct brcmf_ssid8_le { u8 SSID_len; unsigned char SSID[IEEE80211_MAX_SSID_LEN]; }; struct brcmf_scan_params_le { struct brcmf_ssid_le ssid_le; /* default: {0, ""} */ u8 bssid[ETH_ALEN]; /* default: bcast */ s8 bss_type; /* default: any, * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */ u8 scan_type; /* flags, 0 use default */ __le32 nprobes; /* -1 use default, number of probes per channel */ __le32 active_time; /* -1 use default, dwell time per channel for * active scanning */ __le32 passive_time; /* -1 use default, dwell time per channel * for passive scanning */ __le32 home_time; /* -1 use default, dwell time for the * home channel between channel scans */ __le32 channel_num; /* count of channels and ssids that follow * * low half is count of channels in * channel_list, 0 means default (use all * available channels) * * high half is entries in struct brcmf_ssid * array that follows channel_list, aligned for * s32 (4 bytes) meaning an odd channel count * implies a 2-byte pad between end of * channel_list and first ssid * * if ssid count is zero, single ssid in the * fixed parameter portion is assumed, otherwise * ssid in the fixed portion is ignored */ union { __le16 padding; /* Reserve space for at least 1 entry for abort * which uses an on stack brcmf_scan_params_le */ DECLARE_FLEX_ARRAY(__le16, channel_list); /* chanspecs */ }; }; struct brcmf_scan_params_v2_le { __le16 version; /* structure version */ __le16 length; /* structure length */ struct brcmf_ssid_le ssid_le; /* default: {0, ""} */ u8 bssid[ETH_ALEN]; /* default: bcast */ s8 bss_type; /* default: any, * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */ u8 pad; __le32 scan_type; /* flags, 0 use default */ __le32 nprobes; /* -1 use default, number of probes per channel */ __le32 active_time; /* -1 use default, dwell time per channel for * active scanning */ __le32 passive_time; /* -1 use default, dwell time per channel * for passive scanning */ __le32 home_time; /* -1 use default, dwell time for the * home channel between channel scans */ __le32 channel_num; /* count of channels and ssids that follow * * low half is count of channels in * channel_list, 0 means default (use all * available channels) * * high half is entries in struct brcmf_ssid * array that follows channel_list, aligned for * s32 (4 bytes) meaning an odd channel count * implies a 2-byte pad between end of * channel_list and first ssid * * if ssid count is zero, single ssid in the * fixed parameter portion is assumed, otherwise * ssid in the fixed portion is ignored */ union { __le16 padding; /* Reserve space for at least 1 entry for abort * which uses an on stack brcmf_scan_params_v2_le */ DECLARE_FLEX_ARRAY(__le16, channel_list); /* chanspecs */ }; }; struct brcmf_scan_results { u32 buflen; u32 version; u32 count; struct brcmf_bss_info_le bss_info_le[]; }; struct brcmf_escan_params_le { __le32 version; __le16 action; __le16 sync_id; union { struct brcmf_scan_params_le params_le; struct brcmf_scan_params_v2_le params_v2_le; }; }; struct brcmf_escan_result_le { __le32 buflen; __le32 version; __le16 sync_id; __le16 bss_count; struct brcmf_bss_info_le bss_info_le; }; #define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct brcmf_escan_result_le) - \ sizeof(struct brcmf_bss_info_le)) /* used for association with a specific BSSID and chanspec list */ struct brcmf_assoc_params_le { /* 00:00:00:00:00:00: broadcast scan */ u8 bssid[ETH_ALEN]; /* 0: all available channels, otherwise count of chanspecs in * chanspec_list */ __le32 chanspec_num; /* list of chanspecs */ __le16 chanspec_list[1]; }; /** * struct join_pref params - parameters for preferred join selection. * * @type: preference type (see enum brcmf_join_pref_types). * @len: length of bytes following (currently always 2). * @rssi_gain: signal gain for selection (only when @type is RSSI_DELTA). * @band: band to which selection preference applies. * This is used if @type is BAND or RSSI_DELTA. */ struct brcmf_join_pref_params { u8 type; u8 len; u8 rssi_gain; u8 band; }; /* used for join with or without a specific bssid and channel list */ struct brcmf_join_params { struct brcmf_ssid_le ssid_le; struct brcmf_assoc_params_le params_le; }; /* scan params for extended join */ struct brcmf_join_scan_params_le { u8 scan_type; /* 0 use default, active or passive scan */ __le32 nprobes; /* -1 use default, nr of probes per channel */ __le32 active_time; /* -1 use default, dwell time per channel for * active scanning */ __le32 passive_time; /* -1 use default, dwell time per channel * for passive scanning */ __le32 home_time; /* -1 use default, dwell time for the home * channel between channel scans */ }; /* extended join params */ struct brcmf_ext_join_params_le { struct brcmf_ssid_le ssid_le; /* {0, ""}: wildcard scan */ struct brcmf_join_scan_params_le scan_le; struct brcmf_assoc_params_le assoc_le; }; struct brcmf_wsec_key { u32 index; /* key index */ u32 len; /* key length */ u8 data[WLAN_MAX_KEY_LEN]; /* key data */ u32 pad_1[18]; u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ u32 flags; /* misc flags */ u32 pad_2[3]; u32 iv_initialized; /* has IV been initialized already? */ u32 pad_3; /* Rx IV */ struct { u32 hi; /* upper 32 bits of IV */ u16 lo; /* lower 16 bits of IV */ } rxiv; u32 pad_4[2]; u8 ea[ETH_ALEN]; /* per station */ }; /* * dongle requires same struct as above but with fields in little endian order */ struct brcmf_wsec_key_le { __le32 index; /* key index */ __le32 len; /* key length */ u8 data[WLAN_MAX_KEY_LEN]; /* key data */ __le32 pad_1[18]; __le32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ __le32 flags; /* misc flags */ __le32 pad_2[3]; __le32 iv_initialized; /* has IV been initialized already? */ __le32 pad_3; /* Rx IV */ struct { __le32 hi; /* upper 32 bits of IV */ __le16 lo; /* lower 16 bits of IV */ } rxiv; __le32 pad_4[2]; u8 ea[ETH_ALEN]; /* per station */ }; /** * struct brcmf_wsec_pmk_le - firmware pmk material. * * @key_len: number of octets in key material. * @flags: key handling qualifiers. * @key: PMK key material. */ struct brcmf_wsec_pmk_le { __le16 key_len; __le16 flags; u8 key[BRCMF_WSEC_MAX_SAE_PASSWORD_LEN]; }; /** * struct brcmf_wsec_sae_pwd_le - firmware SAE password material. * * @key_len: number of octets in key materials. * @key: SAE password material. */ struct brcmf_wsec_sae_pwd_le { __le16 key_len; u8 key[BRCMF_WSEC_MAX_SAE_PASSWORD_LEN]; }; /* Used to get specific STA parameters */ struct brcmf_scb_val_le { __le32 val; u8 ea[ETH_ALEN]; }; /* channel encoding */ struct brcmf_channel_info_le { __le32 hw_channel; __le32 target_channel; __le32 scan_channel; }; struct brcmf_sta_info_le { __le16 ver; /* version of this struct */ __le16 len; /* length in bytes of this structure */ __le16 cap; /* sta's advertised capabilities */ __le32 flags; /* flags defined below */ __le32 idle; /* time since data pkt rx'd from sta */ u8 ea[ETH_ALEN]; /* Station address */ __le32 count; /* # rates in this set */ u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */ /* w/hi bit set if basic */ __le32 in; /* seconds elapsed since associated */ __le32 listen_interval_inms; /* Min Listen interval in ms for STA */ /* Fields valid for ver >= 3 */ __le32 tx_pkts; /* # of packets transmitted */ __le32 tx_failures; /* # of packets failed */ __le32 rx_ucast_pkts; /* # of unicast packets received */ __le32 rx_mcast_pkts; /* # of multicast packets received */ __le32 tx_rate; /* Rate of last successful tx frame */ __le32 rx_rate; /* Rate of last successful rx frame */ __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */ __le32 rx_decrypt_failures; /* # of packet decrypted failed */ /* Fields valid for ver >= 4 */ __le32 tx_tot_pkts; /* # of tx pkts (ucast + mcast) */ __le32 rx_tot_pkts; /* # of data packets recvd (uni + mcast) */ __le32 tx_mcast_pkts; /* # of mcast pkts txed */ __le64 tx_tot_bytes; /* data bytes txed (ucast + mcast) */ __le64 rx_tot_bytes; /* data bytes recvd (ucast + mcast) */ __le64 tx_ucast_bytes; /* data bytes txed (ucast) */ __le64 tx_mcast_bytes; /* # data bytes txed (mcast) */ __le64 rx_ucast_bytes; /* data bytes recvd (ucast) */ __le64 rx_mcast_bytes; /* data bytes recvd (mcast) */ s8 rssi[BRCMF_ANT_MAX]; /* per antenna rssi */ s8 nf[BRCMF_ANT_MAX]; /* per antenna noise floor */ __le16 aid; /* association ID */ __le16 ht_capabilities; /* advertised ht caps */ __le16 vht_flags; /* converted vht flags */ __le32 tx_pkts_retry_cnt; /* # of frames where a retry was * exhausted. */ __le32 tx_pkts_retry_exhausted; /* # of user frames where a retry * was exhausted */ s8 rx_lastpkt_rssi[BRCMF_ANT_MAX]; /* Per antenna RSSI of last * received data frame. */ /* TX WLAN retry/failure statistics: * Separated for host requested frames and locally generated frames. * Include unicast frame only where the retries/failures can be counted. */ __le32 tx_pkts_total; /* # user frames sent successfully */ __le32 tx_pkts_retries; /* # user frames retries */ __le32 tx_pkts_fw_total; /* # FW generated sent successfully */ __le32 tx_pkts_fw_retries; /* # retries for FW generated frames */ __le32 tx_pkts_fw_retry_exhausted; /* # FW generated where a retry * was exhausted */ __le32 rx_pkts_retried; /* # rx with retry bit set */ __le32 tx_rate_fallback; /* lowest fallback TX rate */ union { struct { struct { __le32 count; /* # rates in this set */ u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units w/hi bit set if basic */ u8 mcs[BRCMF_MCSSET_LEN]; /* supported mcs index bit map */ __le16 vht_mcs[BRCMF_VHT_CAP_MCS_MAP_NSS_MAX]; /* supported mcs index bit map per nss */ } rateset_adv; } v5; struct { __le32 rx_dur_total; /* total user RX duration (estimated) */ __le16 chanspec; /** chanspec this sta is on */ __le16 pad_1; struct { __le16 version; /* version */ __le16 len; /* length */ __le32 count; /* # rates in this set */ u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units w/hi bit set if basic */ u8 mcs[BRCMF_MCSSET_LEN]; /* supported mcs index bit map */ __le16 vht_mcs[BRCMF_VHT_CAP_MCS_MAP_NSS_MAX]; /* supported mcs index bit map per nss */ __le16 he_mcs[BRCMF_HE_CAP_MCS_MAP_NSS_MAX]; /* supported he mcs index bit map per nss */ } rateset_adv; /* rateset along with mcs index bitmap */ __le16 wpauth; /* authentication type */ u8 algo; /* crypto algorithm */ u8 pad_2; __le32 tx_rspec; /* Rate of last successful tx frame */ __le32 rx_rspec; /* Rate of last successful rx frame */ __le32 wnm_cap; /* wnm capabilities */ } v7; }; }; struct brcmf_chanspec_list { __le32 count; /* # of entries */ __le32 element[]; /* variable length uint32 list */ }; /* * WLC_E_PROBRESP_MSG * WLC_E_P2P_PROBREQ_MSG * WLC_E_ACTION_FRAME_RX */ struct brcmf_rx_mgmt_data { __be16 version; __be16 chanspec; __be32 rssi; __be32 mactime; __be32 rate; }; /** * struct brcmf_fil_wowl_pattern_le - wowl pattern configuration struct. * * @cmd: "add", "del" or "clr". * @masksize: Size of the mask in #of bytes * @offset: Pattern byte offset in packet * @patternoffset: Offset of start of pattern. Starting from field masksize. * @patternsize: Size of the pattern itself in #of bytes * @id: id * @reasonsize: Size of the wakeup reason code * @type: Type of pattern (enum brcmf_wowl_pattern_type) */ struct brcmf_fil_wowl_pattern_le { u8 cmd[4]; __le32 masksize; __le32 offset; __le32 patternoffset; __le32 patternsize; __le32 id; __le32 reasonsize; __le32 type; /* u8 mask[] - Mask follows the structure above */ /* u8 pattern[] - Pattern follows the mask is at 'patternoffset' */ }; struct brcmf_mbss_ssid_le { __le32 bsscfgidx; __le32 SSID_len; unsigned char SSID[32]; }; /** * struct brcmf_fil_country_le - country configuration structure. * * @country_abbrev: null-terminated country code used in the country IE. * @rev: revision specifier for ccode. on set, -1 indicates unspecified. * @ccode: null-terminated built-in country code. */ struct brcmf_fil_country_le { char country_abbrev[BRCMF_COUNTRY_BUF_SZ]; __le32 rev; char ccode[BRCMF_COUNTRY_BUF_SZ]; }; /** * struct brcmf_rev_info_le - device revision info. * * @vendorid: PCI vendor id. * @deviceid: device id of chip. * @radiorev: radio revision. * @chiprev: chip revision. * @corerev: core revision. * @boardid: board identifier (usu. PCI sub-device id). * @boardvendor: board vendor (usu. PCI sub-vendor id). * @boardrev: board revision. * @driverrev: driver version. * @ucoderev: microcode version. * @bus: bus type. * @chipnum: chip number. * @phytype: phy type. * @phyrev: phy revision. * @anarev: anacore rev. * @chippkg: chip package info. * @nvramrev: nvram revision number. */ struct brcmf_rev_info_le { __le32 vendorid; __le32 deviceid; __le32 radiorev; __le32 chiprev; __le32 corerev; __le32 boardid; __le32 boardvendor; __le32 boardrev; __le32 driverrev; __le32 ucoderev; __le32 bus; __le32 chipnum; __le32 phytype; __le32 phyrev; __le32 anarev; __le32 chippkg; __le32 nvramrev; }; /** * struct brcmf_wlc_version_le - firmware revision info. * * @version: structure version. * @length: structure length. * @epi_ver_major: EPI major version * @epi_ver_minor: EPI minor version * @epi_ver_rc: EPI rc version * @epi_ver_incr: EPI increment version * @wlc_ver_major: WLC major version * @wlc_ver_minor: WLC minor version */ struct brcmf_wlc_version_le { __le16 version; __le16 length; __le16 epi_ver_major; __le16 epi_ver_minor; __le16 epi_ver_rc; __le16 epi_ver_incr; __le16 wlc_ver_major; __le16 wlc_ver_minor; }; /** * struct brcmf_assoclist_le - request assoc list. * * @count: indicates number of stations. * @mac: MAC addresses of stations. */ struct brcmf_assoclist_le { __le32 count; u8 mac[BRCMF_MAX_ASSOCLIST][ETH_ALEN]; }; /** * struct brcmf_rssi_be - RSSI threshold event format * * @rssi: receive signal strength (in dBm) * @snr: signal-noise ratio * @noise: noise (in dBm) */ struct brcmf_rssi_be { __be32 rssi; __be32 snr; __be32 noise; }; #define BRCMF_MAX_RSSI_LEVELS 8 /** * struct brcm_rssi_event_le - rssi_event IOVAR format * * @rate_limit_msec: RSSI event rate limit * @rssi_level_num: number of supplied RSSI levels * @rssi_levels: RSSI levels in ascending order */ struct brcmf_rssi_event_le { __le32 rate_limit_msec; s8 rssi_level_num; s8 rssi_levels[BRCMF_MAX_RSSI_LEVELS]; }; /** * struct brcmf_wowl_wakeind_le - Wakeup indicators * Note: note both fields contain same information. * * @pci_wakeind: Whether PCI PMECSR PMEStatus bit was set. * @ucode_wakeind: What wakeup-event indication was set by ucode */ struct brcmf_wowl_wakeind_le { __le32 pci_wakeind; __le32 ucode_wakeind; }; /** * struct brcmf_pmksa - PMK Security Association * * @bssid: The AP's BSSID. * @pmkid: he PMK material itself. */ struct brcmf_pmksa { u8 bssid[ETH_ALEN]; u8 pmkid[WLAN_PMKID_LEN]; }; /** * struct brcmf_pmksa_v2 - PMK Security Association * * @length: Length of the structure. * @bssid: The AP's BSSID. * @pmkid: The PMK ID. * @pmk: PMK material for FILS key derivation. * @pmk_len: Length of PMK data. * @ssid: The AP's SSID. * @fils_cache_id: FILS cache identifier */ struct brcmf_pmksa_v2 { __le16 length; u8 bssid[ETH_ALEN]; u8 pmkid[WLAN_PMKID_LEN]; u8 pmk[WLAN_PMK_LEN_SUITE_B_192]; __le16 pmk_len; struct brcmf_ssid8_le ssid; u16 fils_cache_id; }; /** * struct brcmf_pmksa_v3 - PMK Security Association * * @bssid: The AP's BSSID. * @pmkid: The PMK ID. * @pmkid_len: The length of the PMK ID. * @pmk: PMK material for FILS key derivation. * @pmk_len: Length of PMK data. * @fils_cache_id: FILS cache identifier * @ssid: The AP's SSID. * @time_left: Remaining time until expiry. 0 = expired, ~0 = no expiry. */ struct brcmf_pmksa_v3 { u8 bssid[ETH_ALEN]; u8 pmkid[WLAN_PMKID_LEN]; u8 pmkid_len; u8 pmk[WLAN_PMK_LEN_SUITE_B_192]; u8 pmk_len; __le16 fils_cache_id; u8 pad; struct brcmf_ssid8_le ssid; __le32 time_left; }; /** * struct brcmf_pmk_list_le - List of pmksa's. * * @npmk: Number of pmksa's. * @pmk: PMK SA information. */ struct brcmf_pmk_list_le { __le32 npmk; struct brcmf_pmksa pmk[BRCMF_MAXPMKID]; }; /** * struct brcmf_pmk_list_v2_le - List of pmksa's. * * @version: Request version. * @length: Length of this structure. * @pmk: PMK SA information. */ struct brcmf_pmk_list_v2_le { __le16 version; __le16 length; struct brcmf_pmksa_v2 pmk[BRCMF_MAXPMKID]; }; /** * struct brcmf_pmk_op_v3_le - Operation on PMKSA list. * * @version: Request version. * @length: Length of this structure. * @pmk: PMK SA information. */ struct brcmf_pmk_op_v3_le { __le16 version; __le16 length; __le16 count; __le16 pad; struct brcmf_pmksa_v3 pmk[BRCMF_MAXPMKID]; }; /** * struct brcmf_pno_param_le - PNO scan configuration parameters * * @version: PNO parameters version. * @scan_freq: scan frequency. * @lost_network_timeout: #sec. to declare discovered network as lost. * @flags: Bit field to control features of PFN such as sort criteria auto * enable switch and background scan. * @rssi_margin: Margin to avoid jitter for choosing a PFN based on RSSI sort * criteria. * @bestn: number of best networks in each scan. * @mscan: number of scans recorded. * @repeat: minimum number of scan intervals before scan frequency changes * in adaptive scan. * @exp: exponent of 2 for maximum scan interval. * @slow_freq: slow scan period. */ struct brcmf_pno_param_le { __le32 version; __le32 scan_freq; __le32 lost_network_timeout; __le16 flags; __le16 rssi_margin; u8 bestn; u8 mscan; u8 repeat; u8 exp; __le32 slow_freq; }; /** * struct brcmf_pno_config_le - PNO channel configuration. * * @reporttype: determines what is reported. * @channel_num: number of channels specified in @channel_list. * @channel_list: channels to use in PNO scan. * @flags: reserved. */ struct brcmf_pno_config_le { __le32 reporttype; __le32 channel_num; __le16 channel_list[BRCMF_NUMCHANNELS]; __le32 flags; }; /** * struct brcmf_pno_net_param_le - scan parameters per preferred network. * * @ssid: ssid name and its length. * @flags: bit2: hidden. * @infra: BSS vs IBSS. * @auth: Open vs Closed. * @wpa_auth: WPA type. * @wsec: wsec value. */ struct brcmf_pno_net_param_le { struct brcmf_ssid_le ssid; __le32 flags; __le32 infra; __le32 auth; __le32 wpa_auth; __le32 wsec; }; /** * struct brcmf_pno_net_info_le - information per found network. * * @bssid: BSS network identifier. * @channel: channel number only. * @SSID_len: length of ssid. * @SSID: ssid characters. * @RSSI: receive signal strength (in dBm). * @timestamp: age in seconds. */ struct brcmf_pno_net_info_le { u8 bssid[ETH_ALEN]; u8 channel; u8 SSID_len; u8 SSID[32]; __le16 RSSI; __le16 timestamp; }; /** * struct brcmf_pno_scanresults_le - result returned in PNO NET FOUND event. * * @version: PNO version identifier. * @status: indicates completion status of PNO scan. * @count: amount of brcmf_pno_net_info_le entries appended. */ struct brcmf_pno_scanresults_le { __le32 version; __le32 status; __le32 count; }; struct brcmf_pno_scanresults_v2_le { __le32 version; __le32 status; __le32 count; __le32 scan_ch_bucket; }; /** * struct brcmf_pno_macaddr_le - to configure PNO macaddr randomization. * * @version: PNO version identifier. * @flags: Flags defining how mac addrss should be used. * @mac: MAC address. */ struct brcmf_pno_macaddr_le { u8 version; u8 flags; u8 mac[ETH_ALEN]; }; /** * struct brcmf_dload_data_le - data passing to firmware for downloading * @flag: flags related to download data. * @dload_type: type of download data. * @len: length in bytes of download data. * @crc: crc of download data. * @data: download data. */ struct brcmf_dload_data_le { __le16 flag; __le16 dload_type; __le32 len; __le32 crc; u8 data[]; }; /** * struct brcmf_pno_bssid_le - bssid configuration for PNO scan. * * @bssid: BSS network identifier. * @flags: flags for this BSSID. */ struct brcmf_pno_bssid_le { u8 bssid[ETH_ALEN]; __le16 flags; }; /** * struct brcmf_pktcnt_le - packet counters. * * @rx_good_pkt: packets (MSDUs & MMPDUs) received from this station * @rx_bad_pkt: failed rx packets * @tx_good_pkt: packets (MSDUs & MMPDUs) transmitted to this station * @tx_bad_pkt: failed tx packets * @rx_ocast_good_pkt: unicast packets destined for others */ struct brcmf_pktcnt_le { __le32 rx_good_pkt; __le32 rx_bad_pkt; __le32 tx_good_pkt; __le32 tx_bad_pkt; __le32 rx_ocast_good_pkt; }; /** * struct brcmf_gtk_keyinfo_le - GTP rekey data * * @kck: key confirmation key. * @kek: key encryption key. * @replay_counter: replay counter. */ struct brcmf_gtk_keyinfo_le { u8 kck[BRCMF_RSN_KCK_LENGTH]; u8 kek[BRCMF_RSN_KEK_LENGTH]; u8 replay_counter[BRCMF_RSN_REPLAY_LEN]; }; #define BRCMF_PNO_REPORT_NO_BATCH BIT(2) /** * struct brcmf_gscan_bucket_config - configuration data for channel bucket. * * @bucket_end_index: last channel index in @channel_list in * @struct brcmf_pno_config_le. * @bucket_freq_multiple: scan interval expressed in N * @scan_freq. * @flag: channel bucket report flags. * @reserved: for future use. * @repeat: number of scan at interval for exponential scan. * @max_freq_multiple: maximum scan interval for exponential scan. */ struct brcmf_gscan_bucket_config { u8 bucket_end_index; u8 bucket_freq_multiple; u8 flag; u8 reserved; __le16 repeat; __le16 max_freq_multiple; }; /* version supported which must match firmware */ #define BRCMF_GSCAN_CFG_VERSION 2 /** * enum brcmf_gscan_cfg_flags - bit values for gscan flags. * * @BRCMF_GSCAN_CFG_FLAGS_ALL_RESULTS: send probe responses/beacons to host. * @BRCMF_GSCAN_CFG_ALL_BUCKETS_IN_1ST_SCAN: all buckets will be included in * first scan cycle. * @BRCMF_GSCAN_CFG_FLAGS_CHANGE_ONLY: indicated only flags member is changed. */ enum brcmf_gscan_cfg_flags { BRCMF_GSCAN_CFG_FLAGS_ALL_RESULTS = BIT(0), BRCMF_GSCAN_CFG_ALL_BUCKETS_IN_1ST_SCAN = BIT(3), BRCMF_GSCAN_CFG_FLAGS_CHANGE_ONLY = BIT(7), }; /** * struct brcmf_gscan_config - configuration data for gscan. * * @version: version of the api to match firmware. * @flags: flags according %enum brcmf_gscan_cfg_flags. * @buffer_threshold: percentage threshold of buffer to generate an event. * @swc_nbssid_threshold: number of BSSIDs with significant change that * will generate an event. * @swc_rssi_window_size: size of rssi cache buffer (max=8). * @count_of_channel_buckets: number of array members in @bucket. * @retry_threshold: !unknown! * @lost_ap_window: !unknown! * @bucket: array of channel buckets. */ struct brcmf_gscan_config { __le16 version; u8 flags; u8 buffer_threshold; u8 swc_nbssid_threshold; u8 swc_rssi_window_size; u8 count_of_channel_buckets; u8 retry_threshold; __le16 lost_ap_window; struct brcmf_gscan_bucket_config bucket[] __counted_by(count_of_channel_buckets); }; /** * struct brcmf_mkeep_alive_pkt_le - configuration data for keep-alive frame. * * @version: version for mkeep_alive * @length: length of fixed parameters in the structure. * @period_msec: keep-alive period in milliseconds. * @len_bytes: size of the data. * @keep_alive_id: ID (0 - 3). * @data: keep-alive frame data. */ struct brcmf_mkeep_alive_pkt_le { __le16 version; __le16 length; __le32 period_msec; __le16 len_bytes; u8 keep_alive_id; u8 data[]; } __packed; #endif /* FWIL_TYPES_H_ */
