// SPDX-License-Identifier: GPL-2.0-only
/*
 * This file is part of wl1271
 *
 * Copyright (C) 2008-2010 Nokia Corporation
 *
 * Contact: Luciano Coelho <luciano.coelho@nokia.com>
 */

#include <linux/slab.h>
#include <linux/export.h>

#include "debug.h"
#include "acx.h"
#include "boot.h"
#include "io.h"
#include "event.h"
#include "rx.h"
#include "hw_ops.h"

static int wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
{
        u32 cpu_ctrl;
        int ret;

        /* 10.5.0 run the firmware (I) */
        ret = wlcore_read_reg(wl, REG_ECPU_CONTROL, &cpu_ctrl);
        if (ret < 0)
                goto out;

        /* 10.5.1 run the firmware (II) */
        cpu_ctrl |= flag;
        ret = wlcore_write_reg(wl, REG_ECPU_CONTROL, cpu_ctrl);

out:
        return ret;
}

static int wlcore_boot_parse_fw_ver(struct wl1271 *wl,
                                    struct wl1271_static_data *static_data)
{
        int ret;

        strscpy(wl->chip.fw_ver_str, static_data->fw_version,
                sizeof(wl->chip.fw_ver_str));

        ret = sscanf(wl->chip.fw_ver_str + 4, "%u.%u.%u.%u.%u",
                     &wl->chip.fw_ver[0], &wl->chip.fw_ver[1],
                     &wl->chip.fw_ver[2], &wl->chip.fw_ver[3],
                     &wl->chip.fw_ver[4]);

        if (ret != 5) {
                wl1271_warning("fw version incorrect value");
                memset(wl->chip.fw_ver, 0, sizeof(wl->chip.fw_ver));
                ret = -EINVAL;
                goto out;
        }

        ret = wlcore_identify_fw(wl);
        if (ret < 0)
                goto out;
out:
        return ret;
}

static int wlcore_validate_fw_ver(struct wl1271 *wl)
{
        unsigned int *fw_ver = wl->chip.fw_ver;
        unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_MULTI) ?
                wl->min_mr_fw_ver : wl->min_sr_fw_ver;
        char min_fw_str[32] = "";
        int off = 0;
        int i;

        /* the chip must be exactly equal */
        if ((min_ver[FW_VER_CHIP] != WLCORE_FW_VER_IGNORE) &&
            (min_ver[FW_VER_CHIP] != fw_ver[FW_VER_CHIP]))
                goto fail;

        /* the firmware type must be equal */
        if ((min_ver[FW_VER_IF_TYPE] != WLCORE_FW_VER_IGNORE) &&
            (min_ver[FW_VER_IF_TYPE] != fw_ver[FW_VER_IF_TYPE]))
                goto fail;

        /* the project number must be equal */
        if ((min_ver[FW_VER_SUBTYPE] != WLCORE_FW_VER_IGNORE) &&
            (min_ver[FW_VER_SUBTYPE] != fw_ver[FW_VER_SUBTYPE]))
                goto fail;

        /* the API version must be greater or equal */
        if ((min_ver[FW_VER_MAJOR] != WLCORE_FW_VER_IGNORE) &&
                 (min_ver[FW_VER_MAJOR] > fw_ver[FW_VER_MAJOR]))
                goto fail;

        /* if the API version is equal... */
        if (((min_ver[FW_VER_MAJOR] == WLCORE_FW_VER_IGNORE) ||
             (min_ver[FW_VER_MAJOR] == fw_ver[FW_VER_MAJOR])) &&
            /* ...the minor must be greater or equal */
            ((min_ver[FW_VER_MINOR] != WLCORE_FW_VER_IGNORE) &&
             (min_ver[FW_VER_MINOR] > fw_ver[FW_VER_MINOR])))
                goto fail;

        return 0;

fail:
        for (i = 0; i < NUM_FW_VER && off < sizeof(min_fw_str); i++)
                if (min_ver[i] == WLCORE_FW_VER_IGNORE)
                        off += snprintf(min_fw_str + off,
                                        sizeof(min_fw_str) - off,
                                        "*.");
                else
                        off += snprintf(min_fw_str + off,
                                        sizeof(min_fw_str) - off,
                                        "%u.", min_ver[i]);

        wl1271_error("Your WiFi FW version (%u.%u.%u.%u.%u) is invalid.\n"
                     "Please use at least FW %s\n"
                     "You can get the latest firmwares at:\n"
                     "git://git.ti.com/wilink8-wlan/wl18xx_fw.git",
                     fw_ver[FW_VER_CHIP], fw_ver[FW_VER_IF_TYPE],
                     fw_ver[FW_VER_MAJOR], fw_ver[FW_VER_SUBTYPE],
                     fw_ver[FW_VER_MINOR], min_fw_str);
        return -EINVAL;
}

static int wlcore_boot_static_data(struct wl1271 *wl)
{
        struct wl1271_static_data *static_data;
        size_t len = sizeof(*static_data) + wl->static_data_priv_len;
        int ret;

        static_data = kmalloc(len, GFP_KERNEL);
        if (!static_data) {
                ret = -ENOMEM;
                goto out;
        }

        ret = wlcore_read(wl, wl->cmd_box_addr, static_data, len, false);
        if (ret < 0)
                goto out_free;

        ret = wlcore_boot_parse_fw_ver(wl, static_data);
        if (ret < 0)
                goto out_free;

        ret = wlcore_validate_fw_ver(wl);
        if (ret < 0)
                goto out_free;

        ret = wlcore_handle_static_data(wl, static_data);
        if (ret < 0)
                goto out_free;

out_free:
        kfree(static_data);
out:
        return ret;
}

static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
                                             size_t fw_data_len, u32 dest)
{
        struct wlcore_partition_set partition;
        int addr, chunk_num, partition_limit;
        u8 *p, *chunk;
        int ret;

        /* whal_FwCtrl_LoadFwImageSm() */

        wl1271_debug(DEBUG_BOOT, "starting firmware upload");

        wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d",
                     fw_data_len, CHUNK_SIZE);

        if ((fw_data_len % 4) != 0) {
                wl1271_error("firmware length not multiple of four");
                return -EIO;
        }

        chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL);
        if (!chunk) {
                wl1271_error("allocation for firmware upload chunk failed");
                return -ENOMEM;
        }

        memcpy(&partition, &wl->ptable[PART_DOWN], sizeof(partition));
        partition.mem.start = dest;
        ret = wlcore_set_partition(wl, &partition);
        if (ret < 0)
                goto out;

        /* 10.1 set partition limit and chunk num */
        chunk_num = 0;
        partition_limit = wl->ptable[PART_DOWN].mem.size;

        while (chunk_num < fw_data_len / CHUNK_SIZE) {
                /* 10.2 update partition, if needed */
                addr = dest + (chunk_num + 2) * CHUNK_SIZE;
                if (addr > partition_limit) {
                        addr = dest + chunk_num * CHUNK_SIZE;
                        partition_limit = chunk_num * CHUNK_SIZE +
                                wl->ptable[PART_DOWN].mem.size;
                        partition.mem.start = addr;
                        ret = wlcore_set_partition(wl, &partition);
                        if (ret < 0)
                                goto out;
                }

                /* 10.3 upload the chunk */
                addr = dest + chunk_num * CHUNK_SIZE;
                p = buf + chunk_num * CHUNK_SIZE;
                memcpy(chunk, p, CHUNK_SIZE);
                wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
                             p, addr);
                ret = wlcore_write(wl, addr, chunk, CHUNK_SIZE, false);
                if (ret < 0)
                        goto out;

                chunk_num++;
        }

        /* 10.4 upload the last chunk */
        addr = dest + chunk_num * CHUNK_SIZE;
        p = buf + chunk_num * CHUNK_SIZE;
        memcpy(chunk, p, fw_data_len % CHUNK_SIZE);
        wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x",
                     fw_data_len % CHUNK_SIZE, p, addr);
        ret = wlcore_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);

out:
        kfree(chunk);
        return ret;
}

int wlcore_boot_upload_firmware(struct wl1271 *wl)
{
        u32 chunks, addr, len;
        int ret = 0;
        u8 *fw;

        fw = wl->fw;
        chunks = be32_to_cpup((__be32 *) fw);
        fw += sizeof(u32);

        wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks);

        while (chunks--) {
                addr = be32_to_cpup((__be32 *) fw);
                fw += sizeof(u32);
                len = be32_to_cpup((__be32 *) fw);
                fw += sizeof(u32);

                if (len > 300000) {
                        wl1271_info("firmware chunk too long: %u", len);
                        return -EINVAL;
                }
                wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u",
                             chunks, addr, len);
                ret = wl1271_boot_upload_firmware_chunk(wl, fw, len, addr);
                if (ret != 0)
                        break;
                fw += len;
        }

        return ret;
}
EXPORT_SYMBOL_GPL(wlcore_boot_upload_firmware);

int wlcore_boot_upload_nvs(struct wl1271 *wl)
{
        struct platform_device *pdev = wl->pdev;
        struct wlcore_platdev_data *pdev_data = dev_get_platdata(&pdev->dev);
        const char *nvs_name = "unknown";
        size_t nvs_len, burst_len;
        int i;
        u32 dest_addr, val;
        u8 *nvs_ptr, *nvs_aligned;
        int ret;

        if (wl->nvs == NULL) {
                wl1271_error("NVS file is needed during boot");
                return -ENODEV;
        }

        if (pdev_data && pdev_data->family)
                nvs_name = pdev_data->family->nvs_name;

        if (wl->quirks & WLCORE_QUIRK_LEGACY_NVS) {
                struct wl1271_nvs_file *nvs =
                        (struct wl1271_nvs_file *)wl->nvs;
                /*
                 * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz
                 * band configurations) can be removed when those NVS files stop
                 * floating around.
                 */
                if (wl->nvs_len == sizeof(struct wl1271_nvs_file) ||
                    wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) {
                        if (nvs->general_params.dual_mode_select)
                                wl->enable_11a = true;
                }

                if (wl->nvs_len != sizeof(struct wl1271_nvs_file) &&
                    (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE ||
                     wl->enable_11a)) {
                        wl1271_error("%s size is not as expected: %zu != %zu",
                                     nvs_name, wl->nvs_len,
                                     sizeof(struct wl1271_nvs_file));
                        kfree(wl->nvs);
                        wl->nvs = NULL;
                        wl->nvs_len = 0;
                        return -EILSEQ;
                }

                /* only the first part of the NVS needs to be uploaded */
                nvs_len = sizeof(nvs->nvs);
                nvs_ptr = (u8 *) nvs->nvs;
        } else {
                struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;

                if (wl->nvs_len == sizeof(struct wl128x_nvs_file)) {
                        if (nvs->general_params.dual_mode_select)
                                wl->enable_11a = true;
                } else {
                        wl1271_error("%s size is not as expected: %zu != %zu",
                                     nvs_name, wl->nvs_len,
                                     sizeof(struct wl128x_nvs_file));
                        kfree(wl->nvs);
                        wl->nvs = NULL;
                        wl->nvs_len = 0;
                        return -EILSEQ;
                }

                /* only the first part of the NVS needs to be uploaded */
                nvs_len = sizeof(nvs->nvs);
                nvs_ptr = (u8 *)nvs->nvs;
        }

        /* update current MAC address to NVS */
        nvs_ptr[11] = wl->addresses[0].addr[0];
        nvs_ptr[10] = wl->addresses[0].addr[1];
        nvs_ptr[6] = wl->addresses[0].addr[2];
        nvs_ptr[5] = wl->addresses[0].addr[3];
        nvs_ptr[4] = wl->addresses[0].addr[4];
        nvs_ptr[3] = wl->addresses[0].addr[5];

        /*
         * Layout before the actual NVS tables:
         * 1 byte : burst length.
         * 2 bytes: destination address.
         * n bytes: data to burst copy.
         *
         * This is ended by a 0 length, then the NVS tables.
         */

        /* FIXME: Do we need to check here whether the LSB is 1? */
        while (nvs_ptr[0]) {
                burst_len = nvs_ptr[0];
                dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));

                /*
                 * Due to our new wl1271_translate_reg_addr function,
                 * we need to add the register partition start address
                 * to the destination
                 */
                dest_addr += wl->curr_part.reg.start;

                /* We move our pointer to the data */
                nvs_ptr += 3;

                for (i = 0; i < burst_len; i++) {
                        if (nvs_ptr + 3 >= (u8 *) wl->nvs + nvs_len)
                                goto out_badnvs;

                        val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
                               | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));

                        wl1271_debug(DEBUG_BOOT,
                                     "nvs burst write 0x%x: 0x%x",
                                     dest_addr, val);
                        ret = wlcore_write32(wl, dest_addr, val);
                        if (ret < 0)
                                return ret;

                        nvs_ptr += 4;
                        dest_addr += 4;
                }

                if (nvs_ptr >= (u8 *) wl->nvs + nvs_len)
                        goto out_badnvs;
        }

        /*
         * We've reached the first zero length, the first NVS table
         * is located at an aligned offset which is at least 7 bytes further.
         * NOTE: The wl->nvs->nvs element must be first, in order to
         * simplify the casting, we assume it is at the beginning of
         * the wl->nvs structure.
         */
        nvs_ptr = (u8 *)wl->nvs +
                        ALIGN(nvs_ptr - (u8 *)wl->nvs + 7, 4);

        if (nvs_ptr >= (u8 *) wl->nvs + nvs_len)
                goto out_badnvs;

        nvs_len -= nvs_ptr - (u8 *)wl->nvs;

        /* Now we must set the partition correctly */
        ret = wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
        if (ret < 0)
                return ret;

        /* Copy the NVS tables to a new block to ensure alignment */
        nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL);
        if (!nvs_aligned)
                return -ENOMEM;

        /* And finally we upload the NVS tables */
        ret = wlcore_write_data(wl, REG_CMD_MBOX_ADDRESS, nvs_aligned, nvs_len,
                                false);

        kfree(nvs_aligned);
        return ret;

out_badnvs:
        wl1271_error("nvs data is malformed");
        return -EILSEQ;
}
EXPORT_SYMBOL_GPL(wlcore_boot_upload_nvs);

int wlcore_boot_run_firmware(struct wl1271 *wl)
{
        int loop, ret;
        u32 chip_id, intr;

        /* Make sure we have the boot partition */
        ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
        if (ret < 0)
                return ret;

        ret = wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
        if (ret < 0)
                return ret;

        ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &chip_id);
        if (ret < 0)
                return ret;

        wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);

        if (chip_id != wl->chip.id) {
                wl1271_error("chip id doesn't match after firmware boot");
                return -EIO;
        }

        /* wait for init to complete */
        loop = 0;
        while (loop++ < INIT_LOOP) {
                udelay(INIT_LOOP_DELAY);
                ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr);
                if (ret < 0)
                        return ret;

                if (intr == 0xffffffff) {
                        wl1271_error("error reading hardware complete "
                                     "init indication");
                        return -EIO;
                }
                /* check that ACX_INTR_INIT_COMPLETE is enabled */
                else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) {
                        ret = wlcore_write_reg(wl, REG_INTERRUPT_ACK,
                                               WL1271_ACX_INTR_INIT_COMPLETE);
                        if (ret < 0)
                                return ret;
                        break;
                }
        }

        if (loop > INIT_LOOP) {
                wl1271_error("timeout waiting for the hardware to "
                             "complete initialization");
                return -EIO;
        }

        /* get hardware config command mail box */
        ret = wlcore_read_reg(wl, REG_COMMAND_MAILBOX_PTR, &wl->cmd_box_addr);
        if (ret < 0)
                return ret;

        wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x", wl->cmd_box_addr);

        /* get hardware config event mail box */
        ret = wlcore_read_reg(wl, REG_EVENT_MAILBOX_PTR, &wl->mbox_ptr[0]);
        if (ret < 0)
                return ret;

        wl->mbox_ptr[1] = wl->mbox_ptr[0] + wl->mbox_size;

        wl1271_debug(DEBUG_MAILBOX, "MBOX ptrs: 0x%x 0x%x",
                     wl->mbox_ptr[0], wl->mbox_ptr[1]);

        ret = wlcore_boot_static_data(wl);
        if (ret < 0) {
                wl1271_error("error getting static data");
                return ret;
        }

        /*
         * in case of full asynchronous mode the firmware event must be
         * ready to receive event from the command mailbox
         */

        /* unmask required mbox events  */
        ret = wl1271_event_unmask(wl);
        if (ret < 0) {
                wl1271_error("EVENT mask setting failed");
                return ret;
        }

        /* set the working partition to its "running" mode offset */
        ret = wlcore_set_partition(wl, &wl->ptable[PART_WORK]);

        /* firmware startup completed */
        return ret;
}
EXPORT_SYMBOL_GPL(wlcore_boot_run_firmware);