/* SPDX-License-Identifier: ISC */ /* * Copyright (c) 2012-2016,2018-2019, The Linux Foundation. All rights reserved. */ #ifndef WIL6210_TXRX_EDMA_H #define WIL6210_TXRX_EDMA_H #include "wil6210.h" /* limit status ring size in range [ring size..max ring size] */ #define WIL_SRING_SIZE_ORDER_MIN (WIL_RING_SIZE_ORDER_MIN) #define WIL_SRING_SIZE_ORDER_MAX (WIL_RING_SIZE_ORDER_MAX) /* RX sring order should be bigger than RX ring order */ #define WIL_RX_SRING_SIZE_ORDER_DEFAULT (12) #define WIL_TX_SRING_SIZE_ORDER_DEFAULT (14) #define WIL_RX_BUFF_ARR_SIZE_DEFAULT (2600) #define WIL_DEFAULT_RX_STATUS_RING_ID 0 #define WIL_RX_DESC_RING_ID 0 #define WIL_RX_STATUS_IRQ_IDX 0 #define WIL_TX_STATUS_IRQ_IDX 1 #define WIL_EDMA_AGG_WATERMARK (0xffff) #define WIL_EDMA_AGG_WATERMARK_POS (16) #define WIL_EDMA_IDLE_TIME_LIMIT_USEC (50) #define WIL_EDMA_TIME_UNIT_CLK_CYCLES (330) /* fits 1 usec */ /* Error field */ #define WIL_RX_EDMA_ERROR_MIC (1) #define WIL_RX_EDMA_ERROR_KEY (2) /* Key missing */ #define WIL_RX_EDMA_ERROR_REPLAY (3) #define WIL_RX_EDMA_ERROR_AMSDU (4) #define WIL_RX_EDMA_ERROR_FCS (7) #define WIL_RX_EDMA_ERROR_L3_ERR (BIT(0) | BIT(1)) #define WIL_RX_EDMA_ERROR_L4_ERR (BIT(0) | BIT(1)) #define WIL_RX_EDMA_DLPF_LU_MISS_BIT BIT(11) #define WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK 0x7 #define WIL_RX_EDMA_DLPF_LU_HIT_CID_TID_MASK 0xf #define WIL_RX_EDMA_DLPF_LU_MISS_CID_POS 2 #define WIL_RX_EDMA_DLPF_LU_HIT_CID_POS 4 #define WIL_RX_EDMA_DLPF_LU_MISS_TID_POS 5 #define WIL_RX_EDMA_MID_VALID_BIT BIT(20) #define WIL_EDMA_DESC_TX_MAC_CFG_0_QID_POS 16 #define WIL_EDMA_DESC_TX_MAC_CFG_0_QID_LEN 6 #define WIL_EDMA_DESC_TX_CFG_EOP_POS 0 #define WIL_EDMA_DESC_TX_CFG_EOP_LEN 1 #define WIL_EDMA_DESC_TX_CFG_TSO_DESC_TYPE_POS 3 #define WIL_EDMA_DESC_TX_CFG_TSO_DESC_TYPE_LEN 2 #define WIL_EDMA_DESC_TX_CFG_SEG_EN_POS 5 #define WIL_EDMA_DESC_TX_CFG_SEG_EN_LEN 1 #define WIL_EDMA_DESC_TX_CFG_INSERT_IP_CHKSUM_POS 6 #define WIL_EDMA_DESC_TX_CFG_INSERT_IP_CHKSUM_LEN 1 #define WIL_EDMA_DESC_TX_CFG_INSERT_TCP_CHKSUM_POS 7 #define WIL_EDMA_DESC_TX_CFG_INSERT_TCP_CHKSUM_LEN 1 #define WIL_EDMA_DESC_TX_CFG_L4_TYPE_POS 15 #define WIL_EDMA_DESC_TX_CFG_L4_TYPE_LEN 1 #define WIL_EDMA_DESC_TX_CFG_PSEUDO_HEADER_CALC_EN_POS 5 #define WIL_EDMA_DESC_TX_CFG_PSEUDO_HEADER_CALC_EN_LEN 1 /* Enhanced Rx descriptor - MAC part * [dword 0] : Reserved * [dword 1] : Reserved * [dword 2] : Reserved * [dword 3] * bit 0..15 : Buffer ID * bit 16..31 : Reserved */ struct wil_ring_rx_enhanced_mac { u32 d[3]; __le16 buff_id; u16 reserved; } __packed; /* Enhanced Rx descriptor - DMA part * [dword 0] - Reserved * [dword 1] * bit 0..31 : addr_low:32 The payload buffer address, bits 0-31 * [dword 2] * bit 0..15 : addr_high_low:16 The payload buffer address, bits 32-47 * bit 16..31 : Reserved * [dword 3] * bit 0..15 : addr_high_high:16 The payload buffer address, bits 48-63 * bit 16..31 : length */ struct wil_ring_rx_enhanced_dma { u32 d0; struct wil_ring_dma_addr addr; u16 w5; __le16 addr_high_high; __le16 length; } __packed; struct wil_rx_enhanced_desc { struct wil_ring_rx_enhanced_mac mac; struct wil_ring_rx_enhanced_dma dma; } __packed; /* Enhanced Tx descriptor - DMA part * [dword 0] * Same as legacy * [dword 1] * bit 0..31 : addr_low:32 The payload buffer address, bits 0-31 * [dword 2] * bit 0..15 : addr_high_low:16 The payload buffer address, bits 32-47 * bit 16..23 : ip_length:8 The IP header length for the TX IP checksum * offload feature * bit 24..30 : mac_length:7 * bit 31 : ip_version:1 1 - IPv4, 0 - IPv6 * [dword 3] * bit 0..15 : addr_high_high:16 The payload buffer address, bits 48-63 * bit 16..31 : length */ struct wil_ring_tx_enhanced_dma { u8 l4_hdr_len; u8 cmd; u16 w1; struct wil_ring_dma_addr addr; u8 ip_length; u8 b11; /* 0..6: mac_length; 7:ip_version */ __le16 addr_high_high; __le16 length; } __packed; /* Enhanced Tx descriptor - MAC part * [dword 0] * bit 0.. 9 : lifetime_expiry_value:10 * bit 10 : interrupt_en:1 * bit 11 : status_en:1 * bit 12..13 : txss_override:2 * bit 14 : timestamp_insertion:1 * bit 15 : duration_preserve:1 * bit 16..21 : reserved0:6 * bit 22..26 : mcs_index:5 * bit 27 : mcs_en:1 * bit 28..30 : reserved1:3 * bit 31 : sn_preserved:1 * [dword 1] * bit 0.. 3 : pkt_mode:4 * bit 4 : pkt_mode_en:1 * bit 5..14 : reserved0:10 * bit 15 : ack_policy_en:1 * bit 16..19 : dst_index:4 * bit 20 : dst_index_en:1 * bit 21..22 : ack_policy:2 * bit 23 : lifetime_en:1 * bit 24..30 : max_retry:7 * bit 31 : max_retry_en:1 * [dword 2] * bit 0.. 7 : num_of_descriptors:8 * bit 8..17 : reserved:10 * bit 18..19 : l2_translation_type:2 00 - bypass, 01 - 802.3, 10 - 802.11 * bit 20 : snap_hdr_insertion_en:1 * bit 21 : vlan_removal_en:1 * bit 22..23 : reserved0:2 * bit 24 : Dest ID extension:1 * bit 25..31 : reserved0:7 * [dword 3] * bit 0..15 : tso_mss:16 * bit 16..31 : descriptor_scratchpad:16 - mailbox between driver and ucode */ struct wil_ring_tx_enhanced_mac { u32 d[3]; __le16 tso_mss; u16 scratchpad; } __packed; struct wil_tx_enhanced_desc { struct wil_ring_tx_enhanced_mac mac; struct wil_ring_tx_enhanced_dma dma; } __packed; #define TX_STATUS_DESC_READY_POS 7 /* Enhanced TX status message * [dword 0] * bit 0.. 7 : Number of Descriptor:8 - The number of descriptors that * are used to form the packets. It is needed for WB when * releasing the packet * bit 8..15 : tx_ring_id:8 The transmission ring ID that is related to * the message * bit 16..23 : Status:8 - The TX status Code * 0x0 - A successful transmission * 0x1 - Retry expired * 0x2 - Lifetime Expired * 0x3 - Released * 0x4-0xFF - Reserved * bit 24..30 : Reserved:7 * bit 31 : Descriptor Ready bit:1 - It is initiated to * zero by the driver when the ring is created. It is set by the HW * to one for each completed status message. Each wrap around, * the DR bit value is flipped. * [dword 1] * bit 0..31 : timestamp:32 - Set when MPDU is transmitted. * [dword 2] * bit 0.. 4 : MCS:5 - The transmitted MCS value * bit 5 : Reserved:1 * bit 6.. 7 : CB mode:2 - 0-DMG 1-EDMG 2-Wide * bit 8..12 : QID:5 - The QID that was used for the transmission * bit 13..15 : Reserved:3 * bit 16..20 : Num of MSDUs:5 - Number of MSDUs in the aggregation * bit 21..22 : Reserved:2 * bit 23 : Retry:1 - An indication that the transmission was retried * bit 24..31 : TX-Sector:8 - the antenna sector that was used for * transmission * [dword 3] * bit 0..11 : Sequence number:12 - The Sequence Number that was used * for the MPDU transmission * bit 12..31 : Reserved:20 */ struct wil_ring_tx_status { u8 num_descriptors; u8 ring_id; u8 status; u8 desc_ready; /* Only the last bit should be set */ u32 timestamp; u32 d2; u16 seq_number; /* Only the first 12 bits */ u16 w7; } __packed; /* Enhanced Rx status message - compressed part * [dword 0] * bit 0.. 2 : L2 Rx Status:3 - The L2 packet reception Status * 0-Success, 1-MIC Error, 2-Key Error, 3-Replay Error, * 4-A-MSDU Error, 5-Reserved, 6-Reserved, 7-FCS Error * bit 3.. 4 : L3 Rx Status:2 - Bit0 - L3I - L3 identified and checksum * calculated, Bit1- L3Err - IPv4 Checksum Error * bit 5.. 6 : L4 Rx Status:2 - Bit0 - L4I - L4 identified and checksum * calculated, Bit1- L4Err - TCP/UDP Checksum Error * bit 7 : Reserved:1 * bit 8..19 : Flow ID:12 - MSDU flow ID * bit 20 : MID_V:1 - The MAC ID field is valid * bit 21..22 : MID:2 - The MAC ID * bit 23 : L3T:1 - IP types: 0-IPv6, 1-IPv4 * bit 24 : L4T:1 - Layer 4 Type: 0-UDP, 1-TCP * bit 25 : BC:1 - The received MPDU is broadcast * bit 26 : MC:1 - The received MPDU is multicast * bit 27 : Raw:1 - The MPDU received with no translation * bit 28 : Sec:1 - The FC control (b14) - Frame Protected * bit 29 : Error:1 - An error is set when (L2 status != 0) || * (L3 status == 3) || (L4 status == 3) * bit 30 : EOP:1 - End of MSDU signaling. It is set to mark the end * of the transfer, otherwise the status indicates buffer * only completion. * bit 31 : Descriptor Ready bit:1 - It is initiated to * zero by the driver when the ring is created. It is set * by the HW to one for each completed status message. * Each wrap around, the DR bit value is flipped. * [dword 1] * bit 0.. 5 : MAC Len:6 - The number of bytes that are used for L2 header * bit 6..11 : IPLEN:6 - The number of DW that are used for L3 header * bit 12..15 : I4Len:4 - The number of DW that are used for L4 header * bit 16..21 : MCS:6 - The received MCS field from the PLCP Header * bit 22..23 : CB mode:2 - The CB Mode: 0-DMG, 1-EDMG, 2-Wide * bit 24..27 : Data Offset:4 - The data offset, a code that describe the * payload shift from the beginning of the buffer: * 0 - 0 Bytes, 3 - 2 Bytes * bit 28 : A-MSDU Present:1 - The QoS (b7) A-MSDU present field * bit 29 : A-MSDU Type:1 The QoS (b8) A-MSDU Type field * bit 30 : A-MPDU:1 - Packet is part of aggregated MPDU * bit 31 : Key ID:1 - The extracted Key ID from the encryption header * [dword 2] * bit 0..15 : Buffer ID:16 - The Buffer Identifier * bit 16..31 : Length:16 - It indicates the valid bytes that are stored * in the current descriptor buffer. For multiple buffer * descriptor, SW need to sum the total descriptor length * in all buffers to produce the packet length * [dword 3] * bit 0..31 : timestamp:32 - The MPDU Timestamp. */ struct wil_rx_status_compressed { u32 d0; u32 d1; __le16 buff_id; __le16 length; u32 timestamp; } __packed; /* Enhanced Rx status message - extension part * [dword 0] * bit 0.. 4 : QID:5 - The Queue Identifier that the packet is received * from * bit 5.. 7 : Reserved:3 * bit 8..11 : TID:4 - The QoS (b3-0) TID Field * bit 12..15 Source index:4 - The Source index that was found during Parsing the TA. This field is used to define the source of the packet * bit 16..18 : Destination index:3 - The Destination index that was found during Parsing the RA. * bit 19..20 : DS Type:2 - The FC Control (b9-8) - From / To DS * bit 21..22 : MIC ICR:2 - this signal tells the DMA to assert an interrupt after it writes the packet * bit 23 : ESOP:1 - The QoS (b4) ESOP field * bit 24 : RDG:1 * bit 25..31 : Reserved:7 * [dword 1] * bit 0.. 1 : Frame Type:2 - The FC Control (b3-2) - MPDU Type (management, data, control and extension) * bit 2.. 5 : Syb type:4 - The FC Control (b7-4) - Frame Subtype * bit 6..11 : Ext sub type:6 - The FC Control (b11-8) - Frame Extended * Subtype * bit 12..13 : ACK Policy:2 - The QoS (b6-5) ACK Policy fields * bit 14 : DECRYPT_BYP:1 - The MPDU is bypass by the decryption unit * bit 15..23 : Reserved:9 * bit 24..31 : RSSI/SNR:8 - The RSSI / SNR measurement for the received * MPDU * [dword 2] * bit 0..11 : SN:12 - The received Sequence number field * bit 12..15 : Reserved:4 * bit 16..31 : PN bits [15:0]:16 * [dword 3] * bit 0..31 : PN bits [47:16]:32 */ struct wil_rx_status_extension { u32 d0; u32 d1; __le16 seq_num; /* only lower 12 bits */ struct_group_attr(pn, __packed, u16 pn_15_0; u32 pn_47_16; ); } __packed; struct wil_rx_status_extended { struct wil_rx_status_compressed comp; struct wil_rx_status_extension ext; } __packed; static inline void *wil_skb_rxstatus(struct sk_buff *skb) { return (void *)skb->cb; } static inline __le16 wil_rx_status_get_length(void *msg) { return ((struct wil_rx_status_compressed *)msg)->length; } static inline u8 wil_rx_status_get_mcs(void *msg) { return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1, 16, 21); } static inline u8 wil_rx_status_get_cb_mode(void *msg) { return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1, 22, 23); } static inline u16 wil_rx_status_get_flow_id(void *msg) { return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, 8, 19); } static inline u8 wil_rx_status_get_mcast(void *msg) { return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, 26, 26); } /** * In case of DLPF miss the parsing of flow Id should be as follows: * dest_id:2 * src_id :3 - cid * tid:3 * Otherwise: * tid:4 * cid:4 */ static inline u8 wil_rx_status_get_cid(void *msg) { u16 val = wil_rx_status_get_flow_id(msg); if (val & WIL_RX_EDMA_DLPF_LU_MISS_BIT) /* CID is in bits 2..4 */ return (val >> WIL_RX_EDMA_DLPF_LU_MISS_CID_POS) & WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK; else /* CID is in bits 4..7 */ return (val >> WIL_RX_EDMA_DLPF_LU_HIT_CID_POS) & WIL_RX_EDMA_DLPF_LU_HIT_CID_TID_MASK; } static inline u8 wil_rx_status_get_tid(void *msg) { u16 val = wil_rx_status_get_flow_id(msg); if (val & WIL_RX_EDMA_DLPF_LU_MISS_BIT) /* TID is in bits 5..7 */ return (val >> WIL_RX_EDMA_DLPF_LU_MISS_TID_POS) & WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK; else /* TID is in bits 0..3 */ return val & WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK; } static inline int wil_rx_status_get_eop(void *msg) /* EoP = End of Packet */ { return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, 30, 30); } static inline void wil_rx_status_reset_buff_id(struct wil_status_ring *s) { ((struct wil_rx_status_compressed *) (s->va + (s->elem_size * s->swhead)))->buff_id = 0; } static inline __le16 wil_rx_status_get_buff_id(void *msg) { return ((struct wil_rx_status_compressed *)msg)->buff_id; } static inline u8 wil_rx_status_get_data_offset(void *msg) { u8 val = WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1, 24, 27); switch (val) { case 0: return 0; case 3: return 2; default: return 0xFF; } } static inline int wil_rx_status_get_frame_type(struct wil6210_priv *wil, void *msg) { if (wil->use_compressed_rx_status) return IEEE80211_FTYPE_DATA; return WIL_GET_BITS(((struct wil_rx_status_extended *)msg)->ext.d1, 0, 1) << 2; } static inline int wil_rx_status_get_fc1(struct wil6210_priv *wil, void *msg) { if (wil->use_compressed_rx_status) return 0; return WIL_GET_BITS(((struct wil_rx_status_extended *)msg)->ext.d1, 0, 5) << 2; } static inline __le16 wil_rx_status_get_seq(struct wil6210_priv *wil, void *msg) { if (wil->use_compressed_rx_status) return 0; return ((struct wil_rx_status_extended *)msg)->ext.seq_num; } static inline u8 wil_rx_status_get_retry(void *msg) { /* retry bit is missing in EDMA HW. return 1 to be on the safe side */ return 1; } static inline int wil_rx_status_get_mid(void *msg) { if (!(((struct wil_rx_status_compressed *)msg)->d0 & WIL_RX_EDMA_MID_VALID_BIT)) return 0; /* use the default MID */ return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, 21, 22); } static inline int wil_rx_status_get_error(void *msg) { return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, 29, 29); } static inline int wil_rx_status_get_l2_rx_status(void *msg) { return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, 0, 2); } static inline int wil_rx_status_get_l3_rx_status(void *msg) { return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, 3, 4); } static inline int wil_rx_status_get_l4_rx_status(void *msg) { return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, 5, 6); } /* L4 L3 Expected result * 0 0 Ok. No L3 and no L4 known protocols found. * Treated as L2 packet. (no offloads on this packet) * 0 1 Ok. It means that L3 was found, and checksum check passed. * No known L4 protocol was found. * 0 2 It means that L3 protocol was found, and checksum check failed. * No L4 known protocol was found. * 1 any Ok. It means that L4 was found, and checksum check passed. * 3 0 Not a possible scenario. * 3 1 Recalculate. It means that L3 protocol was found, and checksum * passed. But L4 checksum failed. Need to see if really failed, * or due to fragmentation. * 3 2 Both L3 and L4 checksum check failed. */ static inline int wil_rx_status_get_checksum(void *msg, struct wil_net_stats *stats) { int l3_rx_status = wil_rx_status_get_l3_rx_status(msg); int l4_rx_status = wil_rx_status_get_l4_rx_status(msg); if (l4_rx_status == 1) return CHECKSUM_UNNECESSARY; if (l4_rx_status == 0 && l3_rx_status == 1) return CHECKSUM_UNNECESSARY; if (l3_rx_status == 0 && l4_rx_status == 0) /* L2 packet */ return CHECKSUM_NONE; /* If HW reports bad checksum, let IP stack re-check it * For example, HW doesn't understand Microsoft IP stack that * mis-calculates TCP checksum - if it should be 0x0, * it writes 0xffff in violation of RFC 1624 */ stats->rx_csum_err++; return CHECKSUM_NONE; } static inline int wil_rx_status_get_security(void *msg) { return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0, 28, 28); } static inline u8 wil_rx_status_get_key_id(void *msg) { return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1, 31, 31); } static inline u8 wil_tx_status_get_mcs(struct wil_ring_tx_status *msg) { return WIL_GET_BITS(msg->d2, 0, 4); } static inline u32 wil_ring_next_head(struct wil_ring *ring) { return (ring->swhead + 1) % ring->size; } static inline void wil_desc_set_addr_edma(struct wil_ring_dma_addr *addr, __le16 *addr_high_high, dma_addr_t pa) { addr->addr_low = cpu_to_le32(lower_32_bits(pa)); addr->addr_high = cpu_to_le16((u16)upper_32_bits(pa)); *addr_high_high = cpu_to_le16((u16)(upper_32_bits(pa) >> 16)); } static inline dma_addr_t wil_tx_desc_get_addr_edma(struct wil_ring_tx_enhanced_dma *dma) { return le32_to_cpu(dma->addr.addr_low) | ((u64)le16_to_cpu(dma->addr.addr_high) << 32) | ((u64)le16_to_cpu(dma->addr_high_high) << 48); } static inline dma_addr_t wil_rx_desc_get_addr_edma(struct wil_ring_rx_enhanced_dma *dma) { return le32_to_cpu(dma->addr.addr_low) | ((u64)le16_to_cpu(dma->addr.addr_high) << 32) | ((u64)le16_to_cpu(dma->addr_high_high) << 48); } void wil_configure_interrupt_moderation_edma(struct wil6210_priv *wil); int wil_tx_sring_handler(struct wil6210_priv *wil, struct wil_status_ring *sring); void wil_rx_handle_edma(struct wil6210_priv *wil, int *quota); void wil_init_txrx_ops_edma(struct wil6210_priv *wil); #endif /* WIL6210_TXRX_EDMA_H */
