/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
 * Copyright (C) 2023-2025 Intel Corporation
 * Copyright (C) 2013-2014, 2018-2019 Intel Corporation
 * Copyright (C) 2013-2014 Intel Mobile Communications GmbH
 * Copyright (C) 2017 Intel Deutschland GmbH
 */
#ifndef __iwl_fw_api_coex_h__
#define __iwl_fw_api_coex_h__

#include <linux/types.h>
#include <linux/bitops.h>

#define BITS(nb) (BIT(nb) - 1)

enum iwl_bt_coex_lut_type {
        BT_COEX_TIGHT_LUT = 0,
        BT_COEX_LOOSE_LUT,
        BT_COEX_TX_DIS_LUT,

        BT_COEX_MAX_LUT,
        BT_COEX_INVALID_LUT = 0xff,
}; /* BT_COEX_DECISION_LUT_INDEX_API_E_VER_1 */

#define BT_REDUCED_TX_POWER_BIT BIT(7)

enum iwl_bt_coex_mode {
        BT_COEX_DISABLE                 = 0x0,
        BT_COEX_NW                      = 0x1,
        BT_COEX_BT                      = 0x2,
        BT_COEX_WIFI                    = 0x3,
}; /* BT_COEX_MODES_E */

enum iwl_bt_coex_enabled_modules {
        BT_COEX_MPLUT_ENABLED           = BIT(0),
        BT_COEX_MPLUT_BOOST_ENABLED     = BIT(1),
        BT_COEX_SYNC2SCO_ENABLED        = BIT(2),
        BT_COEX_CORUN_ENABLED           = BIT(3),
        BT_COEX_HIGH_BAND_RET           = BIT(4),
}; /* BT_COEX_MODULES_ENABLE_E_VER_1 */

/**
 * struct iwl_bt_coex_cmd - bt coex configuration command
 * @mode: &enum iwl_bt_coex_mode
 * @enabled_modules: &enum iwl_bt_coex_enabled_modules
 *
 * The structure is used for the BT_COEX command.
 */
struct iwl_bt_coex_cmd {
        __le32 mode;
        __le32 enabled_modules;
} __packed; /* BT_COEX_CMD_API_S_VER_6 */

/**
 * struct iwl_bt_coex_reduced_txp_update_cmd - reduced TX power command
 * @reduced_txp: bit BT_REDUCED_TX_POWER_BIT to enable / disable, rest of the
 *      bits are the sta_id (value)
 */
struct iwl_bt_coex_reduced_txp_update_cmd {
        __le32 reduced_txp;
} __packed; /* BT_COEX_UPDATE_REDUCED_TX_POWER_API_S_VER_1 */

/**
 * struct iwl_bt_coex_ci_cmd - bt coex channel inhibition command
 * @bt_primary_ci: primary channel inhibition bitmap
 * @primary_ch_phy_id: primary channel PHY ID
 * @bt_secondary_ci: secondary channel inhibition bitmap
 * @secondary_ch_phy_id: secondary channel PHY ID
 *
 * Used for BT_COEX_CI command
 */
struct iwl_bt_coex_ci_cmd {
        __le64 bt_primary_ci;
        __le32 primary_ch_phy_id;

        __le64 bt_secondary_ci;
        __le32 secondary_ch_phy_id;
} __packed; /* BT_CI_MSG_API_S_VER_2 */

enum iwl_bt_activity_grading {
        BT_OFF                  = 0,
        BT_ON_NO_CONNECTION     = 1,
        BT_LOW_TRAFFIC          = 2,
        BT_HIGH_TRAFFIC         = 3,
        BT_VERY_HIGH_TRAFFIC    = 4,

        BT_MAX_AG,
}; /* BT_COEX_BT_ACTIVITY_GRADING_API_E_VER_1 */

enum iwl_bt_ci_compliance {
        BT_CI_COMPLIANCE_NONE           = 0,
        BT_CI_COMPLIANCE_PRIMARY        = 1,
        BT_CI_COMPLIANCE_SECONDARY      = 2,
        BT_CI_COMPLIANCE_BOTH           = 3,
}; /* BT_COEX_CI_COMPLIENCE_E_VER_1 */

/**
 * struct iwl_bt_coex_prof_old_notif - notification about BT coex
 * @mbox_msg: message from BT to WiFi
 * @msg_idx: the index of the message
 * @bt_ci_compliance: enum %iwl_bt_ci_compliance
 * @primary_ch_lut: LUT used for primary channel &enum iwl_bt_coex_lut_type
 * @secondary_ch_lut: LUT used for secondary channel &enum iwl_bt_coex_lut_type
 * @bt_activity_grading: the activity of BT &enum iwl_bt_activity_grading
 * @ttc_status: is TTC enabled - one bit per PHY
 * @rrc_status: is RRC enabled - one bit per PHY
 * The following fields are only for version 5, and are reserved in version 4:
 * @wifi_loss_low_rssi: The predicted lost WiFi rate (% of air time that BT is
 *      utilizing) when the RSSI is low (<= -65 dBm)
 * @wifi_loss_mid_high_rssi: The predicted lost WiFi rate (% of air time that
 *      BT is utilizing) when the RSSI is mid/high (>= -65 dBm)
 */
struct iwl_bt_coex_prof_old_notif {
        __le32 mbox_msg[4];
        __le32 msg_idx;
        __le32 bt_ci_compliance;

        __le32 primary_ch_lut;
        __le32 secondary_ch_lut;
        __le32 bt_activity_grading;
        u8 ttc_status;
        u8 rrc_status;
        u8 wifi_loss_low_rssi;
        u8 wifi_loss_mid_high_rssi;
} __packed; /* BT_COEX_PROFILE_NTFY_API_S_VER_4
             * BT_COEX_PROFILE_NTFY_API_S_VER_5
             */

/**
 * enum iwl_bt_coex_subcmd_ids - coex configuration command IDs
 */
enum iwl_bt_coex_subcmd_ids {
       /**
        *@PROFILE_NOTIF: &struct iwl_bt_coex_profile_notif
        */
        PROFILE_NOTIF = 0xFF,
};

#define COEX_NUM_BAND   3
#define COEX_NUM_CHAINS 2

/**
 * struct iwl_bt_coex_profile_notif - notification about BT coex
 * @wifi_loss_low_rssi: The predicted lost WiFi rate (% of air time that BT is
 *      utilizing) when the RSSI is low (<= -65 dBm)
 * @wifi_loss_mid_high_rssi: The predicted lost WiFi rate (% of air time that
 *      BT is utilizing) when the RSSI is mid/high (>= -65 dBm)
 */
struct iwl_bt_coex_profile_notif {
        u8 wifi_loss_low_rssi[COEX_NUM_BAND][COEX_NUM_CHAINS];
        u8 wifi_loss_mid_high_rssi[COEX_NUM_BAND][COEX_NUM_CHAINS];
} __packed; /* BT_COEX_BT_PROFILE_NTF_API_S_VER_1 */

#endif /* __iwl_fw_api_coex_h__ */