// SPDX-License-Identifier: GPL-2.0+
//
// wm8994-regulator.c  --  Regulator driver for the WM8994
//
// Copyright 2009 Wolfson Microelectronics PLC.
//
// Author: Mark Brown <broonie@opensource.wolfsonmicro.com>

#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/gpio/consumer.h>
#include <linux/slab.h>

#include <linux/mfd/wm8994/core.h>
#include <linux/mfd/wm8994/registers.h>
#include <linux/mfd/wm8994/pdata.h>

struct wm8994_ldo {
        struct regulator_dev *regulator;
        struct wm8994 *wm8994;
        struct regulator_consumer_supply supply;
        struct regulator_init_data init_data;
};

#define WM8994_LDO1_MAX_SELECTOR 0x7
#define WM8994_LDO2_MAX_SELECTOR 0x3

static const struct regulator_ops wm8994_ldo1_ops = {
        .list_voltage = regulator_list_voltage_linear,
        .map_voltage = regulator_map_voltage_linear,
        .get_voltage_sel = regulator_get_voltage_sel_regmap,
        .set_voltage_sel = regulator_set_voltage_sel_regmap,
};

static int wm8994_ldo2_list_voltage(struct regulator_dev *rdev,
                                    unsigned int selector)
{
        struct wm8994_ldo *ldo = rdev_get_drvdata(rdev);

        if (selector > WM8994_LDO2_MAX_SELECTOR)
                return -EINVAL;

        switch (ldo->wm8994->type) {
        case WM8994:
                return (selector * 100000) + 900000;
        case WM8958:
                return (selector * 100000) + 1000000;
        case WM1811:
                switch (selector) {
                case 0:
                        return -EINVAL;
                default:
                        return (selector * 100000) + 950000;
                }
                break;
        default:
                return -EINVAL;
        }
}

static const struct regulator_ops wm8994_ldo2_ops = {
        .list_voltage = wm8994_ldo2_list_voltage,
        .get_voltage_sel = regulator_get_voltage_sel_regmap,
        .set_voltage_sel = regulator_set_voltage_sel_regmap,
};

static const struct regulator_desc wm8994_ldo_desc[] = {
        {
                .name = "LDO1",
                .id = 1,
                .type = REGULATOR_VOLTAGE,
                .n_voltages = WM8994_LDO1_MAX_SELECTOR + 1,
                .vsel_reg = WM8994_LDO_1,
                .vsel_mask = WM8994_LDO1_VSEL_MASK,
                .ops = &wm8994_ldo1_ops,
                .min_uV = 2400000,
                .uV_step = 100000,
                .enable_time = 3000,
                .off_on_delay = 36000,
                .owner = THIS_MODULE,
        },
        {
                .name = "LDO2",
                .id = 2,
                .type = REGULATOR_VOLTAGE,
                .n_voltages = WM8994_LDO2_MAX_SELECTOR + 1,
                .vsel_reg = WM8994_LDO_2,
                .vsel_mask = WM8994_LDO2_VSEL_MASK,
                .ops = &wm8994_ldo2_ops,
                .enable_time = 3000,
                .off_on_delay = 36000,
                .owner = THIS_MODULE,
        },
};

static const struct regulator_desc wm8958_ldo_desc[] = {
        {
                .name = "LDO1",
                .id = 1,
                .type = REGULATOR_VOLTAGE,
                .n_voltages = WM8994_LDO1_MAX_SELECTOR + 1,
                .vsel_reg = WM8994_LDO_1,
                .vsel_mask = WM8994_LDO1_VSEL_MASK,
                .ops = &wm8994_ldo1_ops,
                .min_uV = 2400000,
                .uV_step = 100000,
                .enable_time = 3000,
                .owner = THIS_MODULE,
        },
        {
                .name = "LDO2",
                .id = 2,
                .type = REGULATOR_VOLTAGE,
                .n_voltages = WM8994_LDO2_MAX_SELECTOR + 1,
                .vsel_reg = WM8994_LDO_2,
                .vsel_mask = WM8994_LDO2_VSEL_MASK,
                .ops = &wm8994_ldo2_ops,
                .enable_time = 3000,
                .owner = THIS_MODULE,
        },
};

static const struct regulator_consumer_supply wm8994_ldo_consumer[] = {
        { .supply = "AVDD1" },
        { .supply = "DCVDD" },
};

static const struct regulator_init_data wm8994_ldo_default[] = {
        {
                .constraints = {
                        .valid_ops_mask = REGULATOR_CHANGE_STATUS,
                },
                .num_consumer_supplies = 1,
        },
        {
                .constraints = {
                        .valid_ops_mask = REGULATOR_CHANGE_STATUS,
                },
                .num_consumer_supplies = 1,
        },
};

static int wm8994_ldo_probe(struct platform_device *pdev)
{
        struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent);
        struct wm8994_pdata *pdata = dev_get_platdata(wm8994->dev);
        int id = pdev->id % ARRAY_SIZE(pdata->ldo);
        struct regulator_config config = { };
        struct wm8994_ldo *ldo;
        struct gpio_desc *gpiod;
        int ret;

        dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);

        ldo = devm_kzalloc(&pdev->dev, sizeof(struct wm8994_ldo), GFP_KERNEL);
        if (!ldo)
                return -ENOMEM;

        ldo->wm8994 = wm8994;
        ldo->supply = wm8994_ldo_consumer[id];
        ldo->supply.dev_name = dev_name(wm8994->dev);

        config.dev = wm8994->dev;
        config.driver_data = ldo;
        config.regmap = wm8994->regmap;
        config.init_data = &ldo->init_data;

        /*
         * Look up LDO enable GPIO from the parent device node, we don't
         * use devm because the regulator core will free the GPIO
         */
        gpiod = gpiod_get_optional(pdev->dev.parent,
                                   id ? "wlf,ldo2ena" : "wlf,ldo1ena",
                                   GPIOD_OUT_LOW |
                                   GPIOD_FLAGS_BIT_NONEXCLUSIVE);
        if (IS_ERR(gpiod))
                return PTR_ERR(gpiod);
        config.ena_gpiod = gpiod;

        /* Use default constraints if none set up */
        if (!pdata || !pdata->ldo[id].init_data || wm8994->dev->of_node) {
                dev_dbg(wm8994->dev, "Using default init data, supply %s %s\n",
                        ldo->supply.dev_name, ldo->supply.supply);

                ldo->init_data = wm8994_ldo_default[id];
                ldo->init_data.consumer_supplies = &ldo->supply;
                if (!gpiod)
                        ldo->init_data.constraints.valid_ops_mask = 0;
        } else {
                ldo->init_data = *pdata->ldo[id].init_data;
        }

        /*
         * At this point the GPIO descriptor is handled over to the
         * regulator core and we need not worry about it on the
         * error path.
         */
        if (ldo->wm8994->type == WM8994) {
                ldo->regulator = devm_regulator_register(&pdev->dev,
                                                         &wm8994_ldo_desc[id],
                                                         &config);
        } else {
                ldo->regulator = devm_regulator_register(&pdev->dev,
                                                         &wm8958_ldo_desc[id],
                                                         &config);
        }

        if (IS_ERR(ldo->regulator)) {
                ret = PTR_ERR(ldo->regulator);
                dev_err(wm8994->dev, "Failed to register LDO%d: %d\n",
                        id + 1, ret);
                return ret;
        }

        platform_set_drvdata(pdev, ldo);

        return 0;
}

static struct platform_driver wm8994_ldo_driver = {
        .probe = wm8994_ldo_probe,
        .driver         = {
                .name   = "wm8994-ldo",
                .probe_type = PROBE_FORCE_SYNCHRONOUS,
        },
};

module_platform_driver(wm8994_ldo_driver);

/* Module information */
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("WM8994 LDO driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm8994-ldo");