/*
 * This file is part of the Chelsio FCoE driver for Linux.
 *
 * Copyright (c) 2008-2013 Chelsio Communications, Inc. All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * OpenIB.org BSD license below:
 *
 *     Redistribution and use in source and binary forms, with or
 *     without modification, are permitted provided that the following
 *     conditions are met:
 *
 *      - Redistributions of source code must retain the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer.
 *
 *      - Redistributions in binary form must reproduce the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer in the documentation and/or other materials
 *        provided with the distribution.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#include "csio_hw.h"
#include "csio_init.h"

static int
csio_t5_set_mem_win(struct csio_hw *hw, uint32_t win)
{
        u32 mem_win_base;
        /*
         * Truncation intentional: we only read the bottom 32-bits of the
         * 64-bit BAR0/BAR1 ...  We use the hardware backdoor mechanism to
         * read BAR0 instead of using pci_resource_start() because we could be
         * operating from within a Virtual Machine which is trapping our
         * accesses to our Configuration Space and we need to set up the PCI-E
         * Memory Window decoders with the actual addresses which will be
         * coming across the PCI-E link.
         */

        /* For T5, only relative offset inside the PCIe BAR is passed */
        mem_win_base = MEMWIN_BASE;

        /*
         * Set up memory window for accessing adapter memory ranges.  (Read
         * back MA register to ensure that changes propagate before we attempt
         * to use the new values.)
         */
        csio_wr_reg32(hw, mem_win_base | BIR_V(0) |
                          WINDOW_V(ilog2(MEMWIN_APERTURE) - 10),
                          PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, win));
        csio_rd_reg32(hw,
                      PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, win));

        return 0;
}

/*
 * Interrupt handler for the PCIE module.
 */
static void
csio_t5_pcie_intr_handler(struct csio_hw *hw)
{
        static struct intr_info pcie_intr_info[] = {
                { MSTGRPPERR_F, "Master Response Read Queue parity error",
                -1, 1 },
                { MSTTIMEOUTPERR_F, "Master Timeout FIFO parity error", -1, 1 },
                { MSIXSTIPERR_F, "MSI-X STI SRAM parity error", -1, 1 },
                { MSIXADDRLPERR_F, "MSI-X AddrL parity error", -1, 1 },
                { MSIXADDRHPERR_F, "MSI-X AddrH parity error", -1, 1 },
                { MSIXDATAPERR_F, "MSI-X data parity error", -1, 1 },
                { MSIXDIPERR_F, "MSI-X DI parity error", -1, 1 },
                { PIOCPLGRPPERR_F, "PCI PIO completion Group FIFO parity error",
                -1, 1 },
                { PIOREQGRPPERR_F, "PCI PIO request Group FIFO parity error",
                -1, 1 },
                { TARTAGPERR_F, "PCI PCI target tag FIFO parity error", -1, 1 },
                { MSTTAGQPERR_F, "PCI master tag queue parity error", -1, 1 },
                { CREQPERR_F, "PCI CMD channel request parity error", -1, 1 },
                { CRSPPERR_F, "PCI CMD channel response parity error", -1, 1 },
                { DREQWRPERR_F, "PCI DMA channel write request parity error",
                -1, 1 },
                { DREQPERR_F, "PCI DMA channel request parity error", -1, 1 },
                { DRSPPERR_F, "PCI DMA channel response parity error", -1, 1 },
                { HREQWRPERR_F, "PCI HMA channel count parity error", -1, 1 },
                { HREQPERR_F, "PCI HMA channel request parity error", -1, 1 },
                { HRSPPERR_F, "PCI HMA channel response parity error", -1, 1 },
                { CFGSNPPERR_F, "PCI config snoop FIFO parity error", -1, 1 },
                { FIDPERR_F, "PCI FID parity error", -1, 1 },
                { VFIDPERR_F, "PCI INTx clear parity error", -1, 1 },
                { MAGRPPERR_F, "PCI MA group FIFO parity error", -1, 1 },
                { PIOTAGPERR_F, "PCI PIO tag parity error", -1, 1 },
                { IPRXHDRGRPPERR_F, "PCI IP Rx header group parity error",
                -1, 1 },
                { IPRXDATAGRPPERR_F, "PCI IP Rx data group parity error",
                -1, 1 },
                { RPLPERR_F, "PCI IP replay buffer parity error", -1, 1 },
                { IPSOTPERR_F, "PCI IP SOT buffer parity error", -1, 1 },
                { TRGT1GRPPERR_F, "PCI TRGT1 group FIFOs parity error", -1, 1 },
                { READRSPERR_F, "Outbound read error", -1, 0 },
                { 0, NULL, 0, 0 }
        };

        int fat;
        fat = csio_handle_intr_status(hw, PCIE_INT_CAUSE_A, pcie_intr_info);
        if (fat)
                csio_hw_fatal_err(hw);
}

/*
 * csio_t5_flash_cfg_addr - return the address of the flash configuration file
 * @hw: the HW module
 *
 * Return the address within the flash where the Firmware Configuration
 * File is stored.
 */
static unsigned int
csio_t5_flash_cfg_addr(struct csio_hw *hw)
{
        return FLASH_CFG_START;
}

/*
 *      csio_t5_mc_read - read from MC through backdoor accesses
 *      @hw: the hw module
 *      @idx: index to the register
 *      @addr: address of first byte requested
 *      @data: 64 bytes of data containing the requested address
 *      @ecc: where to store the corresponding 64-bit ECC word
 *
 *      Read 64 bytes of data from MC starting at a 64-byte-aligned address
 *      that covers the requested address @addr.  If @parity is not %NULL it
 *      is assigned the 64-bit ECC word for the read data.
 */
static int
csio_t5_mc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data,
                uint64_t *ecc)
{
        int i;
        uint32_t mc_bist_cmd_reg, mc_bist_cmd_addr_reg, mc_bist_cmd_len_reg;
        uint32_t mc_bist_data_pattern_reg;

        mc_bist_cmd_reg = MC_REG(MC_P_BIST_CMD_A, idx);
        mc_bist_cmd_addr_reg = MC_REG(MC_P_BIST_CMD_ADDR_A, idx);
        mc_bist_cmd_len_reg = MC_REG(MC_P_BIST_CMD_LEN_A, idx);
        mc_bist_data_pattern_reg = MC_REG(MC_P_BIST_DATA_PATTERN_A, idx);

        if (csio_rd_reg32(hw, mc_bist_cmd_reg) & START_BIST_F)
                return -EBUSY;
        csio_wr_reg32(hw, addr & ~0x3fU, mc_bist_cmd_addr_reg);
        csio_wr_reg32(hw, 64, mc_bist_cmd_len_reg);
        csio_wr_reg32(hw, 0xc, mc_bist_data_pattern_reg);
        csio_wr_reg32(hw, BIST_OPCODE_V(1) | START_BIST_F |  BIST_CMD_GAP_V(1),
                      mc_bist_cmd_reg);
        i = csio_hw_wait_op_done_val(hw, mc_bist_cmd_reg, START_BIST_F,
                                     0, 10, 1, NULL);
        if (i)
                return i;

#define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA_A, i)

        for (i = 15; i >= 0; i--)
                *data++ = htonl(csio_rd_reg32(hw, MC_DATA(i)));
        if (ecc)
                *ecc = csio_rd_reg64(hw, MC_DATA(16));
#undef MC_DATA
        return 0;
}

/*
 *      csio_t5_edc_read - read from EDC through backdoor accesses
 *      @hw: the hw module
 *      @idx: which EDC to access
 *      @addr: address of first byte requested
 *      @data: 64 bytes of data containing the requested address
 *      @ecc: where to store the corresponding 64-bit ECC word
 *
 *      Read 64 bytes of data from EDC starting at a 64-byte-aligned address
 *      that covers the requested address @addr.  If @parity is not %NULL it
 *      is assigned the 64-bit ECC word for the read data.
 */
static int
csio_t5_edc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data,
                uint64_t *ecc)
{
        int i;
        uint32_t edc_bist_cmd_reg, edc_bist_cmd_addr_reg, edc_bist_cmd_len_reg;
        uint32_t edc_bist_cmd_data_pattern;

/*
 * These macro are missing in t4_regs.h file.
 */
#define EDC_STRIDE_T5 (EDC_T51_BASE_ADDR - EDC_T50_BASE_ADDR)
#define EDC_REG_T5(reg, idx) (reg + EDC_STRIDE_T5 * idx)

        edc_bist_cmd_reg = EDC_REG_T5(EDC_H_BIST_CMD_A, idx);
        edc_bist_cmd_addr_reg = EDC_REG_T5(EDC_H_BIST_CMD_ADDR_A, idx);
        edc_bist_cmd_len_reg = EDC_REG_T5(EDC_H_BIST_CMD_LEN_A, idx);
        edc_bist_cmd_data_pattern = EDC_REG_T5(EDC_H_BIST_DATA_PATTERN_A, idx);
#undef EDC_REG_T5
#undef EDC_STRIDE_T5

        if (csio_rd_reg32(hw, edc_bist_cmd_reg) & START_BIST_F)
                return -EBUSY;
        csio_wr_reg32(hw, addr & ~0x3fU, edc_bist_cmd_addr_reg);
        csio_wr_reg32(hw, 64, edc_bist_cmd_len_reg);
        csio_wr_reg32(hw, 0xc, edc_bist_cmd_data_pattern);
        csio_wr_reg32(hw, BIST_OPCODE_V(1) | START_BIST_F |  BIST_CMD_GAP_V(1),
                      edc_bist_cmd_reg);
        i = csio_hw_wait_op_done_val(hw, edc_bist_cmd_reg, START_BIST_F,
                                     0, 10, 1, NULL);
        if (i)
                return i;

#define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA_A, i) + idx)

        for (i = 15; i >= 0; i--)
                *data++ = htonl(csio_rd_reg32(hw, EDC_DATA(i)));
        if (ecc)
                *ecc = csio_rd_reg64(hw, EDC_DATA(16));
#undef EDC_DATA
        return 0;
}

/*
 * csio_t5_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window
 * @hw: the csio_hw
 * @win: PCI-E memory Window to use
 * @mtype: memory type: MEM_EDC0, MEM_EDC1, MEM_MC0 (or MEM_MC) or MEM_MC1
 * @addr: address within indicated memory type
 * @len: amount of memory to transfer
 * @buf: host memory buffer
 * @dir: direction of transfer 1 => read, 0 => write
 *
 * Reads/writes an [almost] arbitrary memory region in the firmware: the
 * firmware memory address, length and host buffer must be aligned on
 * 32-bit boundaries.  The memory is transferred as a raw byte sequence
 * from/to the firmware's memory.  If this memory contains data
 * structures which contain multi-byte integers, it's the callers
 * responsibility to perform appropriate byte order conversions.
 */
static int
csio_t5_memory_rw(struct csio_hw *hw, u32 win, int mtype, u32 addr,
                u32 len, uint32_t *buf, int dir)
{
        u32 pos, start, offset, memoffset;
        u32 edc_size, mc_size, win_pf, mem_reg, mem_aperture, mem_base;

        /*
         * Argument sanity checks ...
         */
        if ((addr & 0x3) || (len & 0x3))
                return -EINVAL;

        /* Offset into the region of memory which is being accessed
         * MEM_EDC0 = 0
         * MEM_EDC1 = 1
         * MEM_MC   = 2 -- T4
         * MEM_MC0  = 2 -- For T5
         * MEM_MC1  = 3 -- For T5
         */
        edc_size  = EDRAM0_SIZE_G(csio_rd_reg32(hw, MA_EDRAM0_BAR_A));
        if (mtype != MEM_MC1)
                memoffset = (mtype * (edc_size * 1024 * 1024));
        else {
                mc_size = EXT_MEM_SIZE_G(csio_rd_reg32(hw,
                                                       MA_EXT_MEMORY_BAR_A));
                memoffset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024;
        }

        /* Determine the PCIE_MEM_ACCESS_OFFSET */
        addr = addr + memoffset;

        /*
         * Each PCI-E Memory Window is programmed with a window size -- or
         * "aperture" -- which controls the granularity of its mapping onto
         * adapter memory.  We need to grab that aperture in order to know
         * how to use the specified window.  The window is also programmed
         * with the base address of the Memory Window in BAR0's address
         * space.  For T4 this is an absolute PCI-E Bus Address.  For T5
         * the address is relative to BAR0.
         */
        mem_reg = csio_rd_reg32(hw,
                        PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, win));
        mem_aperture = 1 << (WINDOW_V(mem_reg) + 10);
        mem_base = PCIEOFST_G(mem_reg) << 10;

        start = addr & ~(mem_aperture-1);
        offset = addr - start;
        win_pf = PFNUM_V(hw->pfn);

        csio_dbg(hw, "csio_t5_memory_rw: mem_reg: 0x%x, mem_aperture: 0x%x\n",
                 mem_reg, mem_aperture);
        csio_dbg(hw, "csio_t5_memory_rw: mem_base: 0x%x, mem_offset: 0x%x\n",
                 mem_base, memoffset);
        csio_dbg(hw, "csio_t5_memory_rw: start:0x%x, offset:0x%x, win_pf:%d\n",
                 start, offset, win_pf);
        csio_dbg(hw, "csio_t5_memory_rw: mtype: %d, addr: 0x%x, len: %d\n",
                 mtype, addr, len);

        for (pos = start; len > 0; pos += mem_aperture, offset = 0) {
                /*
                 * Move PCI-E Memory Window to our current transfer
                 * position.  Read it back to ensure that changes propagate
                 * before we attempt to use the new value.
                 */
                csio_wr_reg32(hw, pos | win_pf,
                        PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win));
                csio_rd_reg32(hw,
                        PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win));

                while (offset < mem_aperture && len > 0) {
                        if (dir)
                                *buf++ = csio_rd_reg32(hw, mem_base + offset);
                        else
                                csio_wr_reg32(hw, *buf++, mem_base + offset);

                        offset += sizeof(__be32);
                        len -= sizeof(__be32);
                }
        }
        return 0;
}

/*
 * csio_t5_dfs_create_ext_mem - setup debugfs for MC0 or MC1 to read the values
 * @hw: the csio_hw
 *
 * This function creates files in the debugfs with external memory region
 * MC0 & MC1.
 */
static void
csio_t5_dfs_create_ext_mem(struct csio_hw *hw)
{
        u32 size;
        int i = csio_rd_reg32(hw, MA_TARGET_MEM_ENABLE_A);

        if (i & EXT_MEM_ENABLE_F) {
                size = csio_rd_reg32(hw, MA_EXT_MEMORY_BAR_A);
                csio_add_debugfs_mem(hw, "mc0", MEM_MC0,
                                     EXT_MEM_SIZE_G(size));
        }
        if (i & EXT_MEM1_ENABLE_F) {
                size = csio_rd_reg32(hw, MA_EXT_MEMORY1_BAR_A);
                csio_add_debugfs_mem(hw, "mc1", MEM_MC1,
                                     EXT_MEM_SIZE_G(size));
        }
}

/* T5 adapter specific function */
struct csio_hw_chip_ops t5_ops = {
        .chip_set_mem_win               = csio_t5_set_mem_win,
        .chip_pcie_intr_handler         = csio_t5_pcie_intr_handler,
        .chip_flash_cfg_addr            = csio_t5_flash_cfg_addr,
        .chip_mc_read                   = csio_t5_mc_read,
        .chip_edc_read                  = csio_t5_edc_read,
        .chip_memory_rw                 = csio_t5_memory_rw,
        .chip_dfs_create_ext_mem        = csio_t5_dfs_create_ext_mem,
};