// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (C) ST-Ericsson SA 2012
 *
 * Charger driver for AB8500
 *
 * Author:
 *      Johan Palsson <johan.palsson@stericsson.com>
 *      Karl Komierowski <karl.komierowski@stericsson.com>
 *      Arun R Murthy <arun.murthy@stericsson.com>
 */

#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/component.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/notifier.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/completion.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/workqueue.h>
#include <linux/kobject.h>
#include <linux/of.h>
#include <linux/mfd/core.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500.h>
#include <linux/usb/otg.h>
#include <linux/mutex.h>
#include <linux/iio/consumer.h>

#include "ab8500-bm.h"
#include "ab8500-chargalg.h"

/* Charger constants */
#define NO_PW_CONN                      0
#define AC_PW_CONN                      1
#define USB_PW_CONN                     2

#define MAIN_WDOG_ENA                   0x01
#define MAIN_WDOG_KICK                  0x02
#define MAIN_WDOG_DIS                   0x00
#define CHARG_WD_KICK                   0x01
#define MAIN_CH_ENA                     0x01
#define MAIN_CH_NO_OVERSHOOT_ENA_N      0x02
#define USB_CH_ENA                      0x01
#define USB_CHG_NO_OVERSHOOT_ENA_N      0x02
#define MAIN_CH_DET                     0x01
#define MAIN_CH_CV_ON                   0x04
#define USB_CH_CV_ON                    0x08
#define VBUS_DET_DBNC100                0x02
#define VBUS_DET_DBNC1                  0x01
#define OTP_ENABLE_WD                   0x01
#define DROP_COUNT_RESET                0x01
#define USB_CH_DET                      0x01

#define MAIN_CH_INPUT_CURR_SHIFT        4
#define VBUS_IN_CURR_LIM_SHIFT          4
#define AUTO_VBUS_IN_CURR_LIM_SHIFT     4
#define VBUS_IN_CURR_LIM_RETRY_SET_TIME 30 /* seconds */

#define LED_INDICATOR_PWM_ENA           0x01
#define LED_INDICATOR_PWM_DIS           0x00
#define LED_IND_CUR_5MA                 0x04
#define LED_INDICATOR_PWM_DUTY_252_256  0xBF

/* HW failure constants */
#define MAIN_CH_TH_PROT                 0x02
#define VBUS_CH_NOK                     0x08
#define USB_CH_TH_PROT                  0x02
#define VBUS_OVV_TH                     0x01
#define MAIN_CH_NOK                     0x01
#define VBUS_DET                        0x80

#define MAIN_CH_STATUS2_MAINCHGDROP             0x80
#define MAIN_CH_STATUS2_MAINCHARGERDETDBNC      0x40
#define USB_CH_VBUSDROP                         0x40
#define USB_CH_VBUSDETDBNC                      0x01

/* UsbLineStatus register bit masks */
#define AB8500_USB_LINK_STATUS          0x78
#define AB8505_USB_LINK_STATUS          0xF8
#define AB8500_STD_HOST_SUSP            0x18
#define USB_LINK_STATUS_SHIFT           3

/* Watchdog timeout constant */
#define WD_TIMER                        0x30 /* 4min */
#define WD_KICK_INTERVAL                (60 * HZ)

/* Lowest charger voltage is 3.39V -> 0x4E */
#define LOW_VOLT_REG                    0x4E

/* Step up/down delay in us */
#define STEP_UDELAY                     1000

#define CHARGER_STATUS_POLL 10 /* in ms */

#define CHG_WD_INTERVAL                 (60 * HZ)

#define AB8500_SW_CONTROL_FALLBACK      0x03
/* Wait for enumeration before charing in us */
#define WAIT_ACA_RID_ENUMERATION        (5 * 1000)
/*External charger control*/
#define AB8500_SYS_CHARGER_CONTROL_REG          0x52
#define EXTERNAL_CHARGER_DISABLE_REG_VAL        0x03
#define EXTERNAL_CHARGER_ENABLE_REG_VAL         0x07

/* UsbLineStatus register - usb types */
enum ab8500_charger_link_status {
        USB_STAT_NOT_CONFIGURED,
        USB_STAT_STD_HOST_NC,
        USB_STAT_STD_HOST_C_NS,
        USB_STAT_STD_HOST_C_S,
        USB_STAT_HOST_CHG_NM,
        USB_STAT_HOST_CHG_HS,
        USB_STAT_HOST_CHG_HS_CHIRP,
        USB_STAT_DEDICATED_CHG,
        USB_STAT_ACA_RID_A,
        USB_STAT_ACA_RID_B,
        USB_STAT_ACA_RID_C_NM,
        USB_STAT_ACA_RID_C_HS,
        USB_STAT_ACA_RID_C_HS_CHIRP,
        USB_STAT_HM_IDGND,
        USB_STAT_RESERVED,
        USB_STAT_NOT_VALID_LINK,
        USB_STAT_PHY_EN,
        USB_STAT_SUP_NO_IDGND_VBUS,
        USB_STAT_SUP_IDGND_VBUS,
        USB_STAT_CHARGER_LINE_1,
        USB_STAT_CARKIT_1,
        USB_STAT_CARKIT_2,
        USB_STAT_ACA_DOCK_CHARGER,
};

enum ab8500_usb_state {
        AB8500_BM_USB_STATE_RESET_HS,   /* HighSpeed Reset */
        AB8500_BM_USB_STATE_RESET_FS,   /* FullSpeed/LowSpeed Reset */
        AB8500_BM_USB_STATE_CONFIGURED,
        AB8500_BM_USB_STATE_SUSPEND,
        AB8500_BM_USB_STATE_RESUME,
        AB8500_BM_USB_STATE_MAX,
};

/* VBUS input current limits supported in AB8500 in uA */
#define USB_CH_IP_CUR_LVL_0P05          50000
#define USB_CH_IP_CUR_LVL_0P09          98000
#define USB_CH_IP_CUR_LVL_0P19          193000
#define USB_CH_IP_CUR_LVL_0P29          290000
#define USB_CH_IP_CUR_LVL_0P38          380000
#define USB_CH_IP_CUR_LVL_0P45          450000
#define USB_CH_IP_CUR_LVL_0P5           500000
#define USB_CH_IP_CUR_LVL_0P6           600000
#define USB_CH_IP_CUR_LVL_0P7           700000
#define USB_CH_IP_CUR_LVL_0P8           800000
#define USB_CH_IP_CUR_LVL_0P9           900000
#define USB_CH_IP_CUR_LVL_1P0           1000000
#define USB_CH_IP_CUR_LVL_1P1           1100000
#define USB_CH_IP_CUR_LVL_1P3           1300000
#define USB_CH_IP_CUR_LVL_1P4           1400000
#define USB_CH_IP_CUR_LVL_1P5           1500000

#define VBAT_TRESH_IP_CUR_RED           3800000

#define to_ab8500_charger_usb_device_info(x) container_of((x), \
        struct ab8500_charger, usb_chg)
#define to_ab8500_charger_ac_device_info(x) container_of((x), \
        struct ab8500_charger, ac_chg)

/**
 * struct ab8500_charger_interrupts - ab8500 interrupts
 * @name:       name of the interrupt
 * @isr         function pointer to the isr
 */
struct ab8500_charger_interrupts {
        char *name;
        irqreturn_t (*isr)(int irq, void *data);
};

struct ab8500_charger_info {
        int charger_connected;
        int charger_online;
        int charger_voltage_uv;
        int cv_active;
        bool wd_expired;
        int charger_current_ua;
};

struct ab8500_charger_event_flags {
        bool mainextchnotok;
        bool main_thermal_prot;
        bool usb_thermal_prot;
        bool vbus_ovv;
        bool usbchargernotok;
        bool chgwdexp;
        bool vbus_collapse;
        bool vbus_drop_end;
};

struct ab8500_charger_usb_state {
        int usb_current_ua;
        int usb_current_tmp_ua;
        enum ab8500_usb_state state;
        enum ab8500_usb_state state_tmp;
        spinlock_t usb_lock;
};

struct ab8500_charger_max_usb_in_curr {
        int usb_type_max_ua;
        int set_max_ua;
        int calculated_max_ua;
};

/**
 * struct ab8500_charger - ab8500 Charger device information
 * @dev:                Pointer to the structure device
 * @vbus_detected:      VBUS detected
 * @vbus_detected_start:
 *                      VBUS detected during startup
 * @ac_conn:            This will be true when the AC charger has been plugged
 * @vddadc_en_ac:       Indicate if VDD ADC supply is enabled because AC
 *                      charger is enabled
 * @vddadc_en_usb:      Indicate if VDD ADC supply is enabled because USB
 *                      charger is enabled
 * @vbat                Battery voltage
 * @old_vbat            Previously measured battery voltage
 * @usb_device_is_unrecognised  USB device is unrecognised by the hardware
 * @autopower           Indicate if we should have automatic pwron after pwrloss
 * @autopower_cfg       platform specific power config support for "pwron after pwrloss"
 * @invalid_charger_detect_state State when forcing AB to use invalid charger
 * @is_aca_rid:         Incicate if accessory is ACA type
 * @current_stepping_sessions:
 *                      Counter for current stepping sessions
 * @parent:             Pointer to the struct ab8500
 * @adc_main_charger_v  ADC channel for main charger voltage
 * @adc_main_charger_c  ADC channel for main charger current
 * @adc_vbus_v          ADC channel for USB charger voltage
 * @adc_usb_charger_c   ADC channel for USB charger current
 * @bm:                 Platform specific battery management information
 * @flags:              Structure for information about events triggered
 * @usb_state:          Structure for usb stack information
 * @max_usb_in_curr:    Max USB charger input current
 * @ac_chg:             AC charger power supply
 * @usb_chg:            USB charger power supply
 * @ac:                 Structure that holds the AC charger properties
 * @usb:                Structure that holds the USB charger properties
 * @regu:               Pointer to the struct regulator
 * @charger_wq:         Work queue for the IRQs and checking HW state
 * @usb_ipt_crnt_lock:  Lock to protect VBUS input current setting from mutuals
 * @pm_lock:            Lock to prevent system to suspend
 * @check_vbat_work     Work for checking vbat threshold to adjust vbus current
 * @check_hw_failure_work:      Work for checking HW state
 * @check_usbchgnotok_work:     Work for checking USB charger not ok status
 * @kick_wd_work:               Work for kicking the charger watchdog in case
 *                              of ABB rev 1.* due to the watchog logic bug
 * @ac_charger_attached_work:   Work for checking if AC charger is still
 *                              connected
 * @usb_charger_attached_work:  Work for checking if USB charger is still
 *                              connected
 * @ac_work:                    Work for checking AC charger connection
 * @detect_usb_type_work:       Work for detecting the USB type connected
 * @usb_link_status_work:       Work for checking the new USB link status
 * @usb_state_changed_work:     Work for checking USB state
 * @attach_work:                Work for detecting USB type
 * @vbus_drop_end_work:         Work for detecting VBUS drop end
 * @check_main_thermal_prot_work:
 *                              Work for checking Main thermal status
 * @check_usb_thermal_prot_work:
 *                              Work for checking USB thermal status
 * @charger_attached_mutex:     For controlling the wakelock
 */
struct ab8500_charger {
        struct device *dev;
        bool vbus_detected;
        bool vbus_detected_start;
        bool ac_conn;
        bool vddadc_en_ac;
        bool vddadc_en_usb;
        int vbat;
        int old_vbat;
        bool usb_device_is_unrecognised;
        bool autopower;
        bool autopower_cfg;
        int invalid_charger_detect_state;
        int is_aca_rid;
        atomic_t current_stepping_sessions;
        struct ab8500 *parent;
        struct iio_channel *adc_main_charger_v;
        struct iio_channel *adc_main_charger_c;
        struct iio_channel *adc_vbus_v;
        struct iio_channel *adc_usb_charger_c;
        struct ab8500_bm_data *bm;
        struct ab8500_charger_event_flags flags;
        struct ab8500_charger_usb_state usb_state;
        struct ab8500_charger_max_usb_in_curr max_usb_in_curr;
        struct ux500_charger ac_chg;
        struct ux500_charger usb_chg;
        struct ab8500_charger_info ac;
        struct ab8500_charger_info usb;
        struct regulator *regu;
        struct workqueue_struct *charger_wq;
        struct mutex usb_ipt_crnt_lock;
        struct delayed_work check_vbat_work;
        struct delayed_work check_hw_failure_work;
        struct delayed_work check_usbchgnotok_work;
        struct delayed_work kick_wd_work;
        struct delayed_work usb_state_changed_work;
        struct delayed_work attach_work;
        struct delayed_work ac_charger_attached_work;
        struct delayed_work usb_charger_attached_work;
        struct delayed_work vbus_drop_end_work;
        struct work_struct ac_work;
        struct work_struct detect_usb_type_work;
        struct work_struct usb_link_status_work;
        struct work_struct check_main_thermal_prot_work;
        struct work_struct check_usb_thermal_prot_work;
        struct usb_phy *usb_phy;
        struct notifier_block nb;
        struct mutex charger_attached_mutex;
};

/* AC properties */
static enum power_supply_property ab8500_charger_ac_props[] = {
        POWER_SUPPLY_PROP_HEALTH,
        POWER_SUPPLY_PROP_PRESENT,
        POWER_SUPPLY_PROP_ONLINE,
        POWER_SUPPLY_PROP_VOLTAGE_NOW,
        POWER_SUPPLY_PROP_VOLTAGE_AVG,
        POWER_SUPPLY_PROP_CURRENT_NOW,
};

/* USB properties */
static enum power_supply_property ab8500_charger_usb_props[] = {
        POWER_SUPPLY_PROP_HEALTH,
        POWER_SUPPLY_PROP_CURRENT_AVG,
        POWER_SUPPLY_PROP_PRESENT,
        POWER_SUPPLY_PROP_ONLINE,
        POWER_SUPPLY_PROP_VOLTAGE_NOW,
        POWER_SUPPLY_PROP_VOLTAGE_AVG,
        POWER_SUPPLY_PROP_CURRENT_NOW,
};

/*
 * Function for enabling and disabling sw fallback mode
 * should always be disabled when no charger is connected.
 */
static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di,
                bool fallback)
{
        u8 val;
        u8 reg;
        u8 bank;
        u8 bit;
        int ret;

        dev_dbg(di->dev, "SW Fallback: %d\n", fallback);

        if (is_ab8500(di->parent)) {
                bank = 0x15;
                reg = 0x0;
                bit = 3;
        } else {
                bank = AB8500_SYS_CTRL1_BLOCK;
                reg = AB8500_SW_CONTROL_FALLBACK;
                bit = 0;
        }

        /* read the register containing fallback bit */
        ret = abx500_get_register_interruptible(di->dev, bank, reg, &val);
        if (ret < 0) {
                dev_err(di->dev, "%d read failed\n", __LINE__);
                return;
        }

        if (is_ab8500(di->parent)) {
                /* enable the OPT emulation registers */
                ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
                if (ret) {
                        dev_err(di->dev, "%d write failed\n", __LINE__);
                        goto disable_otp;
                }
        }

        if (fallback)
                val |= (1 << bit);
        else
                val &= ~(1 << bit);

        /* write back the changed fallback bit value to register */
        ret = abx500_set_register_interruptible(di->dev, bank, reg, val);
        if (ret) {
                dev_err(di->dev, "%d write failed\n", __LINE__);
        }

disable_otp:
        if (is_ab8500(di->parent)) {
                /* disable the set OTP registers again */
                ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
                if (ret) {
                        dev_err(di->dev, "%d write failed\n", __LINE__);
                }
        }
}

/**
 * ab8500_power_supply_changed - a wrapper with local extensions for
 * power_supply_changed
 * @di:   pointer to the ab8500_charger structure
 * @psy:  pointer to power_supply_that have changed.
 *
 */
static void ab8500_power_supply_changed(struct ab8500_charger *di,
                                        struct power_supply *psy)
{
        /*
         * This happens if we get notifications or interrupts and
         * the platform has been configured not to support one or
         * other type of charging.
         */
        if (!psy)
                return;

        if (di->autopower_cfg) {
                if (!di->usb.charger_connected &&
                    !di->ac.charger_connected &&
                    di->autopower) {
                        di->autopower = false;
                        ab8500_enable_disable_sw_fallback(di, false);
                } else if (!di->autopower &&
                           (di->ac.charger_connected ||
                            di->usb.charger_connected)) {
                        di->autopower = true;
                        ab8500_enable_disable_sw_fallback(di, true);
                }
        }
        power_supply_changed(psy);
}

static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
        bool connected)
{
        if (connected != di->usb.charger_connected) {
                dev_dbg(di->dev, "USB connected:%i\n", connected);
                di->usb.charger_connected = connected;

                if (!connected)
                        di->flags.vbus_drop_end = false;

                /*
                 * Sometimes the platform is configured not to support
                 * USB charging and no psy has been created, but we still
                 * will get these notifications.
                 */
                if (di->usb_chg.psy) {
                        sysfs_notify(&di->usb_chg.psy->dev.kobj, NULL,
                                     "present");
                }

                if (connected) {
                        mutex_lock(&di->charger_attached_mutex);
                        mutex_unlock(&di->charger_attached_mutex);

                        if (is_ab8500(di->parent))
                                queue_delayed_work(di->charger_wq,
                                           &di->usb_charger_attached_work,
                                           HZ);
                } else {
                        cancel_delayed_work_sync(&di->usb_charger_attached_work);
                        mutex_lock(&di->charger_attached_mutex);
                        mutex_unlock(&di->charger_attached_mutex);
                }
        }
}

/**
 * ab8500_charger_get_ac_voltage() - get ac charger voltage
 * @di:         pointer to the ab8500_charger structure
 *
 * Returns ac charger voltage in microvolt (on success)
 */
static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di)
{
        int vch, ret;

        /* Only measure voltage if the charger is connected */
        if (di->ac.charger_connected) {
                /* Convert to microvolt, IIO returns millivolt */
                ret = iio_read_channel_processed_scale(di->adc_main_charger_v,
                                                       &vch, 1000);
                if (ret < 0) {
                        dev_err(di->dev, "%s ADC conv failed\n", __func__);
                        return ret;
                }
        } else {
                vch = 0;
        }
        return vch;
}

/**
 * ab8500_charger_ac_cv() - check if the main charger is in CV mode
 * @di:         pointer to the ab8500_charger structure
 *
 * Returns ac charger CV mode (on success) else error code
 */
static int ab8500_charger_ac_cv(struct ab8500_charger *di)
{
        u8 val;
        int ret = 0;

        /* Only check CV mode if the charger is online */
        if (di->ac.charger_online) {
                ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_CH_STATUS1_REG, &val);
                if (ret < 0) {
                        dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                        return 0;
                }

                if (val & MAIN_CH_CV_ON)
                        ret = 1;
                else
                        ret = 0;
        }

        return ret;
}

/**
 * ab8500_charger_get_vbus_voltage() - get vbus voltage
 * @di:         pointer to the ab8500_charger structure
 *
 * This function returns the vbus voltage.
 * Returns vbus voltage in microvolt (on success)
 */
static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di)
{
        int vch, ret;

        /* Only measure voltage if the charger is connected */
        if (di->usb.charger_connected) {
                /* Convert to microvolt, IIO returns millivolt */
                ret = iio_read_channel_processed_scale(di->adc_vbus_v,
                                                       &vch, 1000);
                if (ret < 0) {
                        dev_err(di->dev, "%s ADC conv failed\n", __func__);
                        return ret;
                }
        } else {
                vch = 0;
        }
        return vch;
}

/**
 * ab8500_charger_get_usb_current() - get usb charger current
 * @di:         pointer to the ab8500_charger structure
 *
 * This function returns the usb charger current.
 * Returns usb current in microamperes (on success) and error code on failure
 */
static int ab8500_charger_get_usb_current(struct ab8500_charger *di)
{
        int ich, ret;

        /* Only measure current if the charger is online */
        if (di->usb.charger_online) {
                /* Return microamperes */
                ret = iio_read_channel_processed_scale(di->adc_usb_charger_c,
                                                       &ich, 1000);
                if (ret < 0) {
                        dev_err(di->dev, "%s ADC conv failed\n", __func__);
                        return ret;
                }
        } else {
                ich = 0;
        }
        return ich;
}

/**
 * ab8500_charger_get_ac_current() - get ac charger current
 * @di:         pointer to the ab8500_charger structure
 *
 * This function returns the ac charger current.
 * Returns ac current in microamperes (on success) and error code on failure.
 */
static int ab8500_charger_get_ac_current(struct ab8500_charger *di)
{
        int ich, ret;

        /* Only measure current if the charger is online */
        if (di->ac.charger_online) {
                /* Return microamperes */
                ret = iio_read_channel_processed_scale(di->adc_main_charger_c,
                                                       &ich, 1000);
                if (ret < 0) {
                        dev_err(di->dev, "%s ADC conv failed\n", __func__);
                        return ret;
                }
        } else {
                ich = 0;
        }
        return ich;
}

/**
 * ab8500_charger_usb_cv() - check if the usb charger is in CV mode
 * @di:         pointer to the ab8500_charger structure
 *
 * Returns ac charger CV mode (on success) else error code
 */
static int ab8500_charger_usb_cv(struct ab8500_charger *di)
{
        int ret;
        u8 val;

        /* Only check CV mode if the charger is online */
        if (di->usb.charger_online) {
                ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_CH_USBCH_STAT1_REG, &val);
                if (ret < 0) {
                        dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                        return 0;
                }

                if (val & USB_CH_CV_ON)
                        ret = 1;
                else
                        ret = 0;
        } else {
                ret = 0;
        }

        return ret;
}

/**
 * ab8500_charger_detect_chargers() - Detect the connected chargers
 * @di:         pointer to the ab8500_charger structure
 * @probe:      if probe, don't delay and wait for HW
 *
 * Returns the type of charger connected.
 * For USB it will not mean we can actually charge from it
 * but that there is a USB cable connected that we have to
 * identify. This is used during startup when we don't get
 * interrupts of the charger detection
 *
 * Returns an integer value, that means,
 * NO_PW_CONN  no power supply is connected
 * AC_PW_CONN  if the AC power supply is connected
 * USB_PW_CONN  if the USB power supply is connected
 * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected
 */
static int ab8500_charger_detect_chargers(struct ab8500_charger *di, bool probe)
{
        int result = NO_PW_CONN;
        int ret;
        u8 val;

        /* Check for AC charger */
        ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
                AB8500_CH_STATUS1_REG, &val);
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return ret;
        }

        if (val & MAIN_CH_DET)
                result = AC_PW_CONN;

        /* Check for USB charger */

        if (!probe) {
                /*
                 * AB8500 says VBUS_DET_DBNC1 & VBUS_DET_DBNC100
                 * when disconnecting ACA even though no
                 * charger was connected. Try waiting a little
                 * longer than the 100 ms of VBUS_DET_DBNC100...
                 */
                msleep(110);
        }
        ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
                AB8500_CH_USBCH_STAT1_REG, &val);
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return ret;
        }
        dev_dbg(di->dev,
                "%s AB8500_CH_USBCH_STAT1_REG %x\n", __func__,
                val);
        if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100))
                result |= USB_PW_CONN;

        return result;
}

/**
 * ab8500_charger_max_usb_curr() - get the max curr for the USB type
 * @di:                 pointer to the ab8500_charger structure
 * @link_status:        the identified USB type
 *
 * Get the maximum current that is allowed to be drawn from the host
 * based on the USB type.
 * Returns error code in case of failure else 0 on success
 */
static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
                enum ab8500_charger_link_status link_status)
{
        int ret = 0;

        di->usb_device_is_unrecognised = false;

        /*
         * Platform only supports USB 2.0.
         * This means that charging current from USB source
         * is maximum 500 mA. Every occurrence of USB_STAT_*_HOST_*
         * should set USB_CH_IP_CUR_LVL_0P5.
         */

        switch (link_status) {
        case USB_STAT_STD_HOST_NC:
        case USB_STAT_STD_HOST_C_NS:
        case USB_STAT_STD_HOST_C_S:
                dev_dbg(di->dev, "USB Type - Standard host is "
                        "detected through USB driver\n");
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
                di->is_aca_rid = 0;
                break;
        case USB_STAT_HOST_CHG_HS_CHIRP:
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
                di->is_aca_rid = 0;
                break;
        case USB_STAT_HOST_CHG_HS:
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
                di->is_aca_rid = 0;
                break;
        case USB_STAT_ACA_RID_C_HS:
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P9;
                di->is_aca_rid = 0;
                break;
        case USB_STAT_ACA_RID_A:
                /*
                 * Dedicated charger level minus maximum current accessory
                 * can consume (900mA). Closest level is 500mA
                 */
                dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n");
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
                di->is_aca_rid = 1;
                break;
        case USB_STAT_ACA_RID_B:
                /*
                 * Dedicated charger level minus 120mA (20mA for ACA and
                 * 100mA for potential accessory). Closest level is 1300mA
                 */
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_1P3;
                dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
                                di->max_usb_in_curr.usb_type_max_ua);
                di->is_aca_rid = 1;
                break;
        case USB_STAT_HOST_CHG_NM:
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
                di->is_aca_rid = 0;
                break;
        case USB_STAT_DEDICATED_CHG:
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_1P5;
                di->is_aca_rid = 0;
                break;
        case USB_STAT_ACA_RID_C_HS_CHIRP:
        case USB_STAT_ACA_RID_C_NM:
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_1P5;
                di->is_aca_rid = 1;
                break;
        case USB_STAT_NOT_CONFIGURED:
                if (di->vbus_detected) {
                        di->usb_device_is_unrecognised = true;
                        dev_dbg(di->dev, "USB Type - Legacy charger.\n");
                        di->max_usb_in_curr.usb_type_max_ua =
                                                USB_CH_IP_CUR_LVL_1P5;
                        break;
                }
                fallthrough;
        case USB_STAT_HM_IDGND:
                dev_err(di->dev, "USB Type - Charging not allowed\n");
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P05;
                ret = -ENXIO;
                break;
        case USB_STAT_RESERVED:
                if (is_ab8500(di->parent)) {
                        di->flags.vbus_collapse = true;
                        dev_err(di->dev, "USB Type - USB_STAT_RESERVED "
                                                "VBUS has collapsed\n");
                        ret = -ENXIO;
                        break;
                } else {
                        dev_dbg(di->dev, "USB Type - Charging not allowed\n");
                        di->max_usb_in_curr.usb_type_max_ua =
                                                USB_CH_IP_CUR_LVL_0P05;
                        dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
                                link_status,
                                di->max_usb_in_curr.usb_type_max_ua);
                        ret = -ENXIO;
                        break;
                }
        case USB_STAT_CARKIT_1:
        case USB_STAT_CARKIT_2:
        case USB_STAT_ACA_DOCK_CHARGER:
        case USB_STAT_CHARGER_LINE_1:
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
                dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
                                di->max_usb_in_curr.usb_type_max_ua);
                break;
        case USB_STAT_NOT_VALID_LINK:
                dev_err(di->dev, "USB Type invalid - try charging anyway\n");
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
                break;

        default:
                dev_err(di->dev, "USB Type - Unknown\n");
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P05;
                ret = -ENXIO;
                break;
        }

        di->max_usb_in_curr.set_max_ua = di->max_usb_in_curr.usb_type_max_ua;
        dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
                link_status, di->max_usb_in_curr.set_max_ua);

        return ret;
}

/**
 * ab8500_charger_read_usb_type() - read the type of usb connected
 * @di:         pointer to the ab8500_charger structure
 *
 * Detect the type of the plugged USB
 * Returns error code in case of failure else 0 on success
 */
static int ab8500_charger_read_usb_type(struct ab8500_charger *di)
{
        int ret;
        u8 val;

        ret = abx500_get_register_interruptible(di->dev,
                AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val);
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return ret;
        }
        if (is_ab8500(di->parent))
                ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
                        AB8500_USB_LINE_STAT_REG, &val);
        else
                ret = abx500_get_register_interruptible(di->dev,
                        AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return ret;
        }

        /* get the USB type */
        if (is_ab8500(di->parent))
                val = (val & AB8500_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT;
        else
                val = (val & AB8505_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT;
        ret = ab8500_charger_max_usb_curr(di,
                (enum ab8500_charger_link_status) val);

        return ret;
}

/**
 * ab8500_charger_detect_usb_type() - get the type of usb connected
 * @di:         pointer to the ab8500_charger structure
 *
 * Detect the type of the plugged USB
 * Returns error code in case of failure else 0 on success
 */
static int ab8500_charger_detect_usb_type(struct ab8500_charger *di)
{
        int i, ret;
        u8 val;

        /*
         * On getting the VBUS rising edge detect interrupt there
         * is a 250ms delay after which the register UsbLineStatus
         * is filled with valid data.
         */
        for (i = 0; i < 10; i++) {
                msleep(250);
                ret = abx500_get_register_interruptible(di->dev,
                        AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG,
                        &val);
                dev_dbg(di->dev, "%s AB8500_IT_SOURCE21_REG %x\n",
                        __func__, val);
                if (ret < 0) {
                        dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                        return ret;
                }

                if (is_ab8500(di->parent))
                        ret = abx500_get_register_interruptible(di->dev,
                                AB8500_USB, AB8500_USB_LINE_STAT_REG, &val);
                else
                        ret = abx500_get_register_interruptible(di->dev,
                                AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
                if (ret < 0) {
                        dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                        return ret;
                }
                dev_dbg(di->dev, "%s AB8500_USB_LINE_STAT_REG %x\n", __func__,
                        val);
                /*
                 * Until the IT source register is read the UsbLineStatus
                 * register is not updated, hence doing the same
                 * Revisit this:
                 */

                /* get the USB type */
                if (is_ab8500(di->parent))
                        val = (val & AB8500_USB_LINK_STATUS) >>
                                                        USB_LINK_STATUS_SHIFT;
                else
                        val = (val & AB8505_USB_LINK_STATUS) >>
                                                        USB_LINK_STATUS_SHIFT;
                if (val)
                        break;
        }
        ret = ab8500_charger_max_usb_curr(di,
                (enum ab8500_charger_link_status) val);

        return ret;
}

/*
 * This array maps the raw hex value to charger voltage used by the AB8500
 * Values taken from the UM0836, in microvolt.
 */
static int ab8500_charger_voltage_map[] = {
        3500000,
        3525000,
        3550000,
        3575000,
        3600000,
        3625000,
        3650000,
        3675000,
        3700000,
        3725000,
        3750000,
        3775000,
        3800000,
        3825000,
        3850000,
        3875000,
        3900000,
        3925000,
        3950000,
        3975000,
        4000000,
        4025000,
        4050000,
        4060000,
        4070000,
        4080000,
        4090000,
        4100000,
        4110000,
        4120000,
        4130000,
        4140000,
        4150000,
        4160000,
        4170000,
        4180000,
        4190000,
        4200000,
        4210000,
        4220000,
        4230000,
        4240000,
        4250000,
        4260000,
        4270000,
        4280000,
        4290000,
        4300000,
        4310000,
        4320000,
        4330000,
        4340000,
        4350000,
        4360000,
        4370000,
        4380000,
        4390000,
        4400000,
        4410000,
        4420000,
        4430000,
        4440000,
        4450000,
        4460000,
        4470000,
        4480000,
        4490000,
        4500000,
        4510000,
        4520000,
        4530000,
        4540000,
        4550000,
        4560000,
        4570000,
        4580000,
        4590000,
        4600000,
};

static int ab8500_voltage_to_regval(int voltage_uv)
{
        int i;

        /* Special case for voltage below 3.5V */
        if (voltage_uv < ab8500_charger_voltage_map[0])
                return LOW_VOLT_REG;

        for (i = 1; i < ARRAY_SIZE(ab8500_charger_voltage_map); i++) {
                if (voltage_uv < ab8500_charger_voltage_map[i])
                        return i - 1;
        }

        /* If not last element, return error */
        i = ARRAY_SIZE(ab8500_charger_voltage_map) - 1;
        if (voltage_uv == ab8500_charger_voltage_map[i])
                return i;
        else
                return -1;
}

/* This array maps the raw register value to charger input current */
static int ab8500_charge_input_curr_map[] = {
        50000, 98000, 193000, 290000, 380000, 450000, 500000, 600000,
        700000, 800000, 900000, 1000000, 1100000, 1300000, 1400000, 1500000,
};

/* This array maps the raw register value to charger output current */
static int ab8500_charge_output_curr_map[] = {
        100000, 200000, 300000, 400000, 500000, 600000, 700000, 800000,
        900000, 1000000, 1100000, 1200000, 1300000, 1400000, 1500000, 1500000,
};

static int ab8500_current_to_regval(struct ab8500_charger *di, int curr_ua)
{
        int i;

        if (curr_ua < ab8500_charge_output_curr_map[0])
                return 0;

        for (i = 0; i < ARRAY_SIZE(ab8500_charge_output_curr_map); i++) {
                if (curr_ua < ab8500_charge_output_curr_map[i])
                        return i - 1;
        }

        /* If not last element, return error */
        i =  ARRAY_SIZE(ab8500_charge_output_curr_map) - 1;
        if (curr_ua == ab8500_charge_output_curr_map[i])
                return i;
        else
                return -1;
}

static int ab8500_vbus_in_curr_to_regval(struct ab8500_charger *di, int curr_ua)
{
        int i;

        if (curr_ua < ab8500_charge_input_curr_map[0])
                return 0;

        for (i = 0; i < ARRAY_SIZE(ab8500_charge_input_curr_map); i++) {
                if (curr_ua < ab8500_charge_input_curr_map[i])
                        return i - 1;
        }

        /* If not last element, return error */
        i =  ARRAY_SIZE(ab8500_charge_input_curr_map) - 1;
        if (curr_ua == ab8500_charge_input_curr_map[i])
                return i;
        else
                return -1;
}

/**
 * ab8500_charger_get_usb_cur() - get usb current
 * @di:         pointer to the ab8500_charger structure
 *
 * The usb stack provides the maximum current that can be drawn from
 * the standard usb host. This will be in uA.
 * This function converts current in uA to a value that can be written
 * to the register. Returns -1 if charging is not allowed
 */
static int ab8500_charger_get_usb_cur(struct ab8500_charger *di)
{
        int ret = 0;
        switch (di->usb_state.usb_current_ua) {
        case 100000:
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P09;
                break;
        case 200000:
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P19;
                break;
        case 300000:
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P29;
                break;
        case 400000:
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P38;
                break;
        case 500000:
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
                break;
        default:
                di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P05;
                ret = -EPERM;
                break;
        }
        di->max_usb_in_curr.set_max_ua = di->max_usb_in_curr.usb_type_max_ua;
        return ret;
}

/**
 * ab8500_charger_check_continue_stepping() - Check to allow stepping
 * @di:         pointer to the ab8500_charger structure
 * @reg:        select what charger register to check
 *
 * Check if current stepping should be allowed to continue.
 * Checks if charger source has not collapsed. If it has, further stepping
 * is not allowed.
 */
static bool ab8500_charger_check_continue_stepping(struct ab8500_charger *di,
                                                   int reg)
{
        if (reg == AB8500_USBCH_IPT_CRNTLVL_REG)
                return !di->flags.vbus_drop_end;
        else
                return true;
}

/**
 * ab8500_charger_set_current() - set charger current
 * @di:         pointer to the ab8500_charger structure
 * @ich_ua:     charger current, in uA
 * @reg:        select what charger register to set
 *
 * Set charger current.
 * There is no state machine in the AB to step up/down the charger
 * current to avoid dips and spikes on MAIN, VBUS and VBAT when
 * charging is started. Instead we need to implement
 * this charger current step-up/down here.
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_set_current(struct ab8500_charger *di,
        int ich_ua, int reg)
{
        int ret = 0;
        int curr_index, prev_curr_index, shift_value, i;
        u8 reg_value;
        u32 step_udelay;
        bool no_stepping = false;

        atomic_inc(&di->current_stepping_sessions);

        ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
                reg, &reg_value);
        if (ret < 0) {
                dev_err(di->dev, "%s read failed\n", __func__);
                goto exit_set_current;
        }

        switch (reg) {
        case AB8500_MCH_IPT_CURLVL_REG:
                shift_value = MAIN_CH_INPUT_CURR_SHIFT;
                prev_curr_index = (reg_value >> shift_value);
                curr_index = ab8500_current_to_regval(di, ich_ua);
                step_udelay = STEP_UDELAY;
                if (!di->ac.charger_connected)
                        no_stepping = true;
                break;
        case AB8500_USBCH_IPT_CRNTLVL_REG:
                shift_value = VBUS_IN_CURR_LIM_SHIFT;
                prev_curr_index = (reg_value >> shift_value);
                curr_index = ab8500_vbus_in_curr_to_regval(di, ich_ua);
                step_udelay = STEP_UDELAY * 100;

                if (!di->usb.charger_connected)
                        no_stepping = true;
                break;
        case AB8500_CH_OPT_CRNTLVL_REG:
                shift_value = 0;
                prev_curr_index = (reg_value >> shift_value);
                curr_index = ab8500_current_to_regval(di, ich_ua);
                step_udelay = STEP_UDELAY;
                if (curr_index && (curr_index - prev_curr_index) > 1)
                        step_udelay *= 100;

                if (!di->usb.charger_connected && !di->ac.charger_connected)
                        no_stepping = true;

                break;
        default:
                dev_err(di->dev, "%s current register not valid\n", __func__);
                ret = -ENXIO;
                goto exit_set_current;
        }

        if (curr_index < 0) {
                dev_err(di->dev, "requested current limit out-of-range\n");
                ret = -ENXIO;
                goto exit_set_current;
        }

        /* only update current if it's been changed */
        if (prev_curr_index == curr_index) {
                dev_dbg(di->dev, "%s current not changed for reg: 0x%02x\n",
                        __func__, reg);
                ret = 0;
                goto exit_set_current;
        }

        dev_dbg(di->dev, "%s set charger current: %d uA for reg: 0x%02x\n",
                __func__, ich_ua, reg);

        if (no_stepping) {
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                                        reg, (u8)curr_index << shift_value);
                if (ret)
                        dev_err(di->dev, "%s write failed\n", __func__);
        } else if (prev_curr_index > curr_index) {
                for (i = prev_curr_index - 1; i >= curr_index; i--) {
                        dev_dbg(di->dev, "curr change_1 to: %x for 0x%02x\n",
                                (u8) i << shift_value, reg);
                        ret = abx500_set_register_interruptible(di->dev,
                                AB8500_CHARGER, reg, (u8)i << shift_value);
                        if (ret) {
                                dev_err(di->dev, "%s write failed\n", __func__);
                                goto exit_set_current;
                        }
                        if (i != curr_index)
                                usleep_range(step_udelay, step_udelay * 2);
                }
        } else {
                bool allow = true;
                for (i = prev_curr_index + 1; i <= curr_index && allow; i++) {
                        dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n",
                                (u8)i << shift_value, reg);
                        ret = abx500_set_register_interruptible(di->dev,
                                AB8500_CHARGER, reg, (u8)i << shift_value);
                        if (ret) {
                                dev_err(di->dev, "%s write failed\n", __func__);
                                goto exit_set_current;
                        }
                        if (i != curr_index)
                                usleep_range(step_udelay, step_udelay * 2);

                        allow = ab8500_charger_check_continue_stepping(di, reg);
                }
        }

exit_set_current:
        atomic_dec(&di->current_stepping_sessions);

        return ret;
}

/**
 * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit
 * @di:         pointer to the ab8500_charger structure
 * @ich_in_ua:  charger input current limit in microampere
 *
 * Sets the current that can be drawn from the USB host
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di,
                int ich_in_ua)
{
        int min_value;
        int ret;

        /* We should always use to lowest current limit */
        min_value = min(di->bm->chg_params->usb_curr_max_ua, ich_in_ua);
        if (di->max_usb_in_curr.set_max_ua > 0)
                min_value = min(di->max_usb_in_curr.set_max_ua, min_value);

        if (di->usb_state.usb_current_ua >= 0)
                min_value = min(di->usb_state.usb_current_ua, min_value);

        switch (min_value) {
        case 100000:
                if (di->vbat < VBAT_TRESH_IP_CUR_RED)
                        min_value = USB_CH_IP_CUR_LVL_0P05;
                break;
        case 500000:
                if (di->vbat < VBAT_TRESH_IP_CUR_RED)
                        min_value = USB_CH_IP_CUR_LVL_0P45;
                break;
        default:
                break;
        }

        dev_info(di->dev, "VBUS input current limit set to %d uA\n", min_value);

        mutex_lock(&di->usb_ipt_crnt_lock);
        ret = ab8500_charger_set_current(di, min_value,
                AB8500_USBCH_IPT_CRNTLVL_REG);
        mutex_unlock(&di->usb_ipt_crnt_lock);

        return ret;
}

/**
 * ab8500_charger_set_main_in_curr() - set main charger input current
 * @di:         pointer to the ab8500_charger structure
 * @ich_in_ua:  input charger current, in uA
 *
 * Set main charger input current.
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di,
        int ich_in_ua)
{
        return ab8500_charger_set_current(di, ich_in_ua,
                AB8500_MCH_IPT_CURLVL_REG);
}

/**
 * ab8500_charger_set_output_curr() - set charger output current
 * @di:         pointer to the ab8500_charger structure
 * @ich_out_ua: output charger current, in uA
 *
 * Set charger output current.
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_set_output_curr(struct ab8500_charger *di,
        int ich_out_ua)
{
        return ab8500_charger_set_current(di, ich_out_ua,
                AB8500_CH_OPT_CRNTLVL_REG);
}

/**
 * ab8500_charger_led_en() - turn on/off chargign led
 * @di:         pointer to the ab8500_charger structure
 * @on:         flag to turn on/off the chargign led
 *
 * Power ON/OFF charging LED indication
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_led_en(struct ab8500_charger *di, int on)
{
        int ret;

        if (on) {
                /* Power ON charging LED indicator, set LED current to 5mA */
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_LED_INDICATOR_PWM_CTRL,
                        (LED_IND_CUR_5MA | LED_INDICATOR_PWM_ENA));
                if (ret) {
                        dev_err(di->dev, "Power ON LED failed\n");
                        return ret;
                }
                /* LED indicator PWM duty cycle 252/256 */
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_LED_INDICATOR_PWM_DUTY,
                        LED_INDICATOR_PWM_DUTY_252_256);
                if (ret) {
                        dev_err(di->dev, "Set LED PWM duty cycle failed\n");
                        return ret;
                }
        } else {
                /* Power off charging LED indicator */
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_LED_INDICATOR_PWM_CTRL,
                        LED_INDICATOR_PWM_DIS);
                if (ret) {
                        dev_err(di->dev, "Power-off LED failed\n");
                        return ret;
                }
        }

        return ret;
}

/**
 * ab8500_charger_ac_en() - enable or disable ac charging
 * @di:         pointer to the ab8500_charger structure
 * @enable:     enable/disable flag
 * @vset_uv:    charging voltage in microvolt
 * @iset_ua:    charging current in microampere
 *
 * Enable/Disable AC/Mains charging and turns on/off the charging led
 * respectively.
 **/
static int ab8500_charger_ac_en(struct ux500_charger *charger,
        int enable, int vset_uv, int iset_ua)
{
        int ret;
        int volt_index;
        int curr_index;
        int input_curr_index;
        u8 overshoot = 0;

        struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger);

        if (enable) {
                /* Check if AC is connected */
                if (!di->ac.charger_connected) {
                        dev_err(di->dev, "AC charger not connected\n");
                        return -ENXIO;
                }

                /* Enable AC charging */
                dev_dbg(di->dev, "Enable AC: %duV %duA\n", vset_uv, iset_ua);

                /*
                 * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
                 * will be triggered every time we enable the VDD ADC supply.
                 * This will turn off charging for a short while.
                 * It can be avoided by having the supply on when
                 * there is a charger enabled. Normally the VDD ADC supply
                 * is enabled every time a GPADC conversion is triggered.
                 * We will force it to be enabled from this driver to have
                 * the GPADC module independent of the AB8500 chargers
                 */
                if (!di->vddadc_en_ac) {
                        ret = regulator_enable(di->regu);
                        if (ret)
                                dev_warn(di->dev,
                                        "Failed to enable regulator\n");
                        else
                                di->vddadc_en_ac = true;
                }

                /* Check if the requested voltage or current is valid */
                volt_index = ab8500_voltage_to_regval(vset_uv);
                curr_index = ab8500_current_to_regval(di, iset_ua);
                input_curr_index = ab8500_current_to_regval(di,
                        di->bm->chg_params->ac_curr_max_ua);
                if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) {
                        dev_err(di->dev,
                                "Charger voltage or current too high, "
                                "charging not started\n");
                        return -ENXIO;
                }

                /* ChVoltLevel: maximum battery charging voltage */
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_CH_VOLT_LVL_REG, (u8) volt_index);
                if (ret) {
                        dev_err(di->dev, "%s write failed\n", __func__);
                        return ret;
                }
                /* MainChInputCurr: current that can be drawn from the charger*/
                ret = ab8500_charger_set_main_in_curr(di,
                        di->bm->chg_params->ac_curr_max_ua);
                if (ret) {
                        dev_err(di->dev, "%s Failed to set MainChInputCurr\n",
                                __func__);
                        return ret;
                }
                /* ChOutputCurentLevel: protected output current */
                ret = ab8500_charger_set_output_curr(di, iset_ua);
                if (ret) {
                        dev_err(di->dev, "%s "
                                "Failed to set ChOutputCurentLevel\n",
                                __func__);
                        return ret;
                }

                /* Check if VBAT overshoot control should be enabled */
                if (!di->bm->enable_overshoot)
                        overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N;

                /* Enable Main Charger */
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_MCH_CTRL1, MAIN_CH_ENA | overshoot);
                if (ret) {
                        dev_err(di->dev, "%s write failed\n", __func__);
                        return ret;
                }

                /* Power on charging LED indication */
                ret = ab8500_charger_led_en(di, true);
                if (ret < 0)
                        dev_err(di->dev, "failed to enable LED\n");

                di->ac.charger_online = 1;
        } else {
                /* Disable AC charging */
                if (is_ab8500_1p1_or_earlier(di->parent)) {
                        /*
                         * For ABB revision 1.0 and 1.1 there is a bug in the
                         * watchdog logic. That means we have to continuously
                         * kick the charger watchdog even when no charger is
                         * connected. This is only valid once the AC charger
                         * has been enabled. This is a bug that is not handled
                         * by the algorithm and the watchdog have to be kicked
                         * by the charger driver when the AC charger
                         * is disabled
                         */
                        if (di->ac_conn) {
                                queue_delayed_work(di->charger_wq,
                                        &di->kick_wd_work,
                                        round_jiffies(WD_KICK_INTERVAL));
                        }

                        /*
                         * We can't turn off charging completely
                         * due to a bug in AB8500 cut1.
                         * If we do, charging will not start again.
                         * That is why we set the lowest voltage
                         * and current possible
                         */
                        ret = abx500_set_register_interruptible(di->dev,
                                AB8500_CHARGER,
                                AB8500_CH_VOLT_LVL_REG, CH_VOL_LVL_3P5);
                        if (ret) {
                                dev_err(di->dev,
                                        "%s write failed\n", __func__);
                                return ret;
                        }

                        ret = ab8500_charger_set_output_curr(di, 0);
                        if (ret) {
                                dev_err(di->dev, "%s "
                                        "Failed to set ChOutputCurentLevel\n",
                                        __func__);
                                return ret;
                        }
                } else {
                        ret = abx500_set_register_interruptible(di->dev,
                                AB8500_CHARGER,
                                AB8500_MCH_CTRL1, 0);
                        if (ret) {
                                dev_err(di->dev,
                                        "%s write failed\n", __func__);
                                return ret;
                        }
                }

                ret = ab8500_charger_led_en(di, false);
                if (ret < 0)
                        dev_err(di->dev, "failed to disable LED\n");

                di->ac.charger_online = 0;
                di->ac.wd_expired = false;

                /* Disable regulator if enabled */
                if (di->vddadc_en_ac) {
                        regulator_disable(di->regu);
                        di->vddadc_en_ac = false;
                }

                dev_dbg(di->dev, "%s Disabled AC charging\n", __func__);
        }
        ab8500_power_supply_changed(di, di->ac_chg.psy);

        return ret;
}

/**
 * ab8500_charger_usb_en() - enable usb charging
 * @di:         pointer to the ab8500_charger structure
 * @enable:     enable/disable flag
 * @vset_uv:    charging voltage in microvolt
 * @ich_out_ua: charger output current in microampere
 *
 * Enable/Disable USB charging and turns on/off the charging led respectively.
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_usb_en(struct ux500_charger *charger,
        int enable, int vset_uv, int ich_out_ua)
{
        int ret;
        int volt_index;
        int curr_index;
        u8 overshoot = 0;

        struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger);

        if (enable) {
                /* Check if USB is connected */
                if (!di->usb.charger_connected) {
                        dev_err(di->dev, "USB charger not connected\n");
                        return -ENXIO;
                }

                /*
                 * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
                 * will be triggered every time we enable the VDD ADC supply.
                 * This will turn off charging for a short while.
                 * It can be avoided by having the supply on when
                 * there is a charger enabled. Normally the VDD ADC supply
                 * is enabled every time a GPADC conversion is triggered.
                 * We will force it to be enabled from this driver to have
                 * the GPADC module independent of the AB8500 chargers
                 */
                if (!di->vddadc_en_usb) {
                        ret = regulator_enable(di->regu);
                        if (ret)
                                dev_warn(di->dev,
                                        "Failed to enable regulator\n");
                        else
                                di->vddadc_en_usb = true;
                }

                /* Enable USB charging */
                dev_dbg(di->dev, "Enable USB: %d uV %d uA\n", vset_uv, ich_out_ua);

                /* Check if the requested voltage or current is valid */
                volt_index = ab8500_voltage_to_regval(vset_uv);
                curr_index = ab8500_current_to_regval(di, ich_out_ua);
                if (volt_index < 0 || curr_index < 0) {
                        dev_err(di->dev,
                                "Charger voltage or current too high, "
                                "charging not started\n");
                        return -ENXIO;
                }

                /*
                 * ChVoltLevel: max voltage up to which battery can be
                 * charged
                 */
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_CH_VOLT_LVL_REG, (u8) volt_index);
                if (ret) {
                        dev_err(di->dev, "%s write failed\n", __func__);
                        return ret;
                }
                /* Check if VBAT overshoot control should be enabled */
                if (!di->bm->enable_overshoot)
                        overshoot = USB_CHG_NO_OVERSHOOT_ENA_N;

                /* Enable USB Charger */
                dev_dbg(di->dev,
                        "Enabling USB with write to AB8500_USBCH_CTRL1_REG\n");
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot);
                if (ret) {
                        dev_err(di->dev, "%s write failed\n", __func__);
                        return ret;
                }

                /* If success power on charging LED indication */
                ret = ab8500_charger_led_en(di, true);
                if (ret < 0)
                        dev_err(di->dev, "failed to enable LED\n");

                di->usb.charger_online = 1;

                /* USBChInputCurr: current that can be drawn from the usb */
                ret = ab8500_charger_set_vbus_in_curr(di,
                                        di->max_usb_in_curr.usb_type_max_ua);
                if (ret) {
                        dev_err(di->dev, "setting USBChInputCurr failed\n");
                        return ret;
                }

                /* ChOutputCurentLevel: protected output current */
                ret = ab8500_charger_set_output_curr(di, ich_out_ua);
                if (ret) {
                        dev_err(di->dev, "%s "
                                "Failed to set ChOutputCurentLevel\n",
                                __func__);
                        return ret;
                }

                queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ);

        } else {
                /* Disable USB charging */
                dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);
                ret = abx500_set_register_interruptible(di->dev,
                        AB8500_CHARGER,
                        AB8500_USBCH_CTRL1_REG, 0);
                if (ret) {
                        dev_err(di->dev,
                                "%s write failed\n", __func__);
                        return ret;
                }

                ret = ab8500_charger_led_en(di, false);
                if (ret < 0)
                        dev_err(di->dev, "failed to disable LED\n");
                /* USBChInputCurr: current that can be drawn from the usb */
                ret = ab8500_charger_set_vbus_in_curr(di, 0);
                if (ret) {
                        dev_err(di->dev, "setting USBChInputCurr failed\n");
                        return ret;
                }

                /* ChOutputCurentLevel: protected output current */
                ret = ab8500_charger_set_output_curr(di, 0);
                if (ret) {
                        dev_err(di->dev, "%s "
                                "Failed to reset ChOutputCurentLevel\n",
                                __func__);
                        return ret;
                }
                di->usb.charger_online = 0;
                di->usb.wd_expired = false;

                /* Disable regulator if enabled */
                if (di->vddadc_en_usb) {
                        regulator_disable(di->regu);
                        di->vddadc_en_usb = false;
                }

                dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);

                /* Cancel any pending Vbat check work */
                cancel_delayed_work(&di->check_vbat_work);

        }
        ab8500_power_supply_changed(di, di->usb_chg.psy);

        return ret;
}

/**
 * ab8500_charger_usb_check_enable() - enable usb charging
 * @charger:    pointer to the ux500_charger structure
 * @vset_uv:    charging voltage in microvolt
 * @iset_ua:    charger output current in microampere
 *
 * Check if the VBUS charger has been disconnected and reconnected without
 * AB8500 rising an interrupt. Returns 0 on success.
 */
static int ab8500_charger_usb_check_enable(struct ux500_charger *charger,
        int vset_uv, int iset_ua)
{
        u8 usbch_ctrl1 = 0;
        int ret = 0;

        struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger);

        if (!di->usb.charger_connected)
                return ret;

        ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
                                AB8500_USBCH_CTRL1_REG, &usbch_ctrl1);
        if (ret < 0) {
                dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
                return ret;
        }
        dev_dbg(di->dev, "USB charger ctrl: 0x%02x\n", usbch_ctrl1);

        if (!(usbch_ctrl1 & USB_CH_ENA)) {
                dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");

                ret = abx500_mask_and_set_register_interruptible(di->dev,
                                        AB8500_CHARGER, AB8500_CHARGER_CTRL,
                                        DROP_COUNT_RESET, DROP_COUNT_RESET);
                if (ret < 0) {
                        dev_err(di->dev, "ab8500 write failed %d\n", __LINE__);
                        return ret;
                }

                ret = ab8500_charger_usb_en(&di->usb_chg, true, vset_uv, iset_ua);
                if (ret < 0) {
                        dev_err(di->dev, "Failed to enable VBUS charger %d\n",
                                        __LINE__);
                        return ret;
                }
        }
        return ret;
}

/**
 * ab8500_charger_ac_check_enable() - enable usb charging
 * @charger:    pointer to the ux500_charger structure
 * @vset_uv:    charging voltage in microvolt
 * @iset_ua:    charger output current in micrompere
 *
 * Check if the AC charger has been disconnected and reconnected without
 * AB8500 rising an interrupt. Returns 0 on success.
 */
static int ab8500_charger_ac_check_enable(struct ux500_charger *charger,
        int vset_uv, int iset_ua)
{
        u8 mainch_ctrl1 = 0;
        int ret = 0;

        struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger);

        if (!di->ac.charger_connected)
                return ret;

        ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
                                AB8500_MCH_CTRL1, &mainch_ctrl1);
        if (ret < 0) {
                dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
                return ret;
        }
        dev_dbg(di->dev, "AC charger ctrl: 0x%02x\n", mainch_ctrl1);

        if (!(mainch_ctrl1 & MAIN_CH_ENA)) {
                dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");

                ret = abx500_mask_and_set_register_interruptible(di->dev,
                                        AB8500_CHARGER, AB8500_CHARGER_CTRL,
                                        DROP_COUNT_RESET, DROP_COUNT_RESET);

                if (ret < 0) {
                        dev_err(di->dev, "ab8500 write failed %d\n", __LINE__);
                        return ret;
                }

                ret = ab8500_charger_ac_en(&di->usb_chg, true, vset_uv, iset_ua);
                if (ret < 0) {
                        dev_err(di->dev, "failed to enable AC charger %d\n",
                                __LINE__);
                        return ret;
                }
        }
        return ret;
}

/**
 * ab8500_charger_watchdog_kick() - kick charger watchdog
 * @di:         pointer to the ab8500_charger structure
 *
 * Kick charger watchdog
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_watchdog_kick(struct ux500_charger *charger)
{
        int ret;
        struct ab8500_charger *di;

        if (charger->psy->desc->type == POWER_SUPPLY_TYPE_MAINS)
                di = to_ab8500_charger_ac_device_info(charger);
        else if (charger->psy->desc->type == POWER_SUPPLY_TYPE_USB)
                di = to_ab8500_charger_usb_device_info(charger);
        else
                return -ENXIO;

        ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
        if (ret)
                dev_err(di->dev, "Failed to kick WD!\n");

        return ret;
}

/**
 * ab8500_charger_update_charger_current() - update charger current
 * @charger:            pointer to the ab8500_charger structure
 * @ich_out_ua:         desired output current in microampere
 *
 * Update the charger output current for the specified charger
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_update_charger_current(struct ux500_charger *charger,
                int ich_out_ua)
{
        int ret;
        struct ab8500_charger *di;

        if (charger->psy->desc->type == POWER_SUPPLY_TYPE_MAINS)
                di = to_ab8500_charger_ac_device_info(charger);
        else if (charger->psy->desc->type == POWER_SUPPLY_TYPE_USB)
                di = to_ab8500_charger_usb_device_info(charger);
        else
                return -ENXIO;

        ret = ab8500_charger_set_output_curr(di, ich_out_ua);
        if (ret) {
                dev_err(di->dev, "%s "
                        "Failed to set ChOutputCurentLevel\n",
                        __func__);
                return ret;
        }

        /* Reset the main and usb drop input current measurement counter */
        ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                                AB8500_CHARGER_CTRL, DROP_COUNT_RESET);
        if (ret) {
                dev_err(di->dev, "%s write failed\n", __func__);
                return ret;
        }

        return ret;
}

static int ab8500_charger_get_ext_psy_data(struct power_supply *ext, void *data)
{
        struct power_supply *psy;
        const char **supplicants = (const char **)ext->supplied_to;
        struct ab8500_charger *di;
        union power_supply_propval ret;
        int j;
        struct ux500_charger *usb_chg;

        usb_chg = (struct ux500_charger *)data;
        psy = usb_chg->psy;

        di = to_ab8500_charger_usb_device_info(usb_chg);

        /*
         * For all psy where the driver name appears in any supplied_to
         * in practice what we will find will always be "ab8500_fg" as
         * the fuel gauge is responsible of keeping track of VBAT.
         */
        j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
        if (j < 0)
                return 0;

        /* Go through all properties for the psy */
        for (j = 0; j < ext->desc->num_properties; j++) {
                enum power_supply_property prop;
                prop = ext->desc->properties[j];

                if (power_supply_get_property(ext, prop, &ret))
                        continue;

                switch (prop) {
                case POWER_SUPPLY_PROP_VOLTAGE_NOW:
                        switch (ext->desc->type) {
                        case POWER_SUPPLY_TYPE_BATTERY:
                                /* This will always be "ab8500_fg" */
                                dev_dbg(di->dev, "get VBAT from %s\n",
                                        dev_name(&ext->dev));
                                di->vbat = ret.intval;
                                break;
                        default:
                                break;
                        }
                        break;
                default:
                        break;
                }
        }
        return 0;
}

/**
 * ab8500_charger_check_vbat_work() - keep vbus current within spec
 * @work        pointer to the work_struct structure
 *
 * Due to a asic bug it is necessary to lower the input current to the vbus
 * charger when charging with at some specific levels. This issue is only valid
 * for below a certain battery voltage. This function makes sure that
 * the allowed current limit isn't exceeded.
 */
static void ab8500_charger_check_vbat_work(struct work_struct *work)
{
        int t = 10;
        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, check_vbat_work.work);

        power_supply_for_each_psy(&di->usb_chg, ab8500_charger_get_ext_psy_data);

        /* First run old_vbat is 0. */
        if (di->old_vbat == 0)
                di->old_vbat = di->vbat;

        if (!((di->old_vbat <= VBAT_TRESH_IP_CUR_RED &&
                di->vbat <= VBAT_TRESH_IP_CUR_RED) ||
                (di->old_vbat > VBAT_TRESH_IP_CUR_RED &&
                di->vbat > VBAT_TRESH_IP_CUR_RED))) {

                dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d,"
                        " old: %d\n", di->max_usb_in_curr.usb_type_max_ua,
                        di->vbat, di->old_vbat);
                ab8500_charger_set_vbus_in_curr(di,
                                        di->max_usb_in_curr.usb_type_max_ua);
                power_supply_changed(di->usb_chg.psy);
        }

        di->old_vbat = di->vbat;

        /*
         * No need to check the battery voltage every second when not close to
         * the threshold.
         */
        if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100000) &&
                (di->vbat > (VBAT_TRESH_IP_CUR_RED - 100000)))
                        t = 1;

        queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ);
}

/**
 * ab8500_charger_check_hw_failure_work() - check main charger failure
 * @work:       pointer to the work_struct structure
 *
 * Work queue function for checking the main charger status
 */
static void ab8500_charger_check_hw_failure_work(struct work_struct *work)
{
        int ret;
        u8 reg_value;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, check_hw_failure_work.work);

        /* Check if the status bits for HW failure is still active */
        if (di->flags.mainextchnotok) {
                ret = abx500_get_register_interruptible(di->dev,
                        AB8500_CHARGER, AB8500_CH_STATUS2_REG, &reg_value);
                if (ret < 0) {
                        dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                        return;
                }
                if (!(reg_value & MAIN_CH_NOK)) {
                        di->flags.mainextchnotok = false;
                        ab8500_power_supply_changed(di, di->ac_chg.psy);
                }
        }
        if (di->flags.vbus_ovv) {
                ret = abx500_get_register_interruptible(di->dev,
                        AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG,
                        &reg_value);
                if (ret < 0) {
                        dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                        return;
                }
                if (!(reg_value & VBUS_OVV_TH)) {
                        di->flags.vbus_ovv = false;
                        ab8500_power_supply_changed(di, di->usb_chg.psy);
                }
        }
        /* If we still have a failure, schedule a new check */
        if (di->flags.mainextchnotok || di->flags.vbus_ovv) {
                queue_delayed_work(di->charger_wq,
                        &di->check_hw_failure_work, round_jiffies(HZ));
        }
}

/**
 * ab8500_charger_kick_watchdog_work() - kick the watchdog
 * @work:       pointer to the work_struct structure
 *
 * Work queue function for kicking the charger watchdog.
 *
 * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
 * logic. That means we have to continuously kick the charger
 * watchdog even when no charger is connected. This is only
 * valid once the AC charger has been enabled. This is
 * a bug that is not handled by the algorithm and the
 * watchdog have to be kicked by the charger driver
 * when the AC charger is disabled
 */
static void ab8500_charger_kick_watchdog_work(struct work_struct *work)
{
        int ret;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, kick_wd_work.work);

        ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
        if (ret)
                dev_err(di->dev, "Failed to kick WD!\n");

        /* Schedule a new watchdog kick */
        queue_delayed_work(di->charger_wq,
                &di->kick_wd_work, round_jiffies(WD_KICK_INTERVAL));
}

/**
 * ab8500_charger_ac_work() - work to get and set main charger status
 * @work:       pointer to the work_struct structure
 *
 * Work queue function for checking the main charger status
 */
static void ab8500_charger_ac_work(struct work_struct *work)
{
        int ret;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, ac_work);

        /*
         * Since we can't be sure that the events are received
         * synchronously, we have the check if the main charger is
         * connected by reading the status register
         */
        ret = ab8500_charger_detect_chargers(di, false);
        if (ret < 0)
                return;

        if (ret & AC_PW_CONN) {
                di->ac.charger_connected = 1;
                di->ac_conn = true;
        } else {
                di->ac.charger_connected = 0;
        }

        ab8500_power_supply_changed(di, di->ac_chg.psy);
        sysfs_notify(&di->ac_chg.psy->dev.kobj, NULL, "present");
}

static void ab8500_charger_usb_attached_work(struct work_struct *work)
{
        struct ab8500_charger *di = container_of(work,
                                                 struct ab8500_charger,
                                                 usb_charger_attached_work.work);
        int usbch = (USB_CH_VBUSDROP | USB_CH_VBUSDETDBNC);
        int ret, i;
        u8 statval;

        for (i = 0; i < 10; i++) {
                ret = abx500_get_register_interruptible(di->dev,
                                                        AB8500_CHARGER,
                                                        AB8500_CH_USBCH_STAT1_REG,
                                                        &statval);
                if (ret < 0) {
                        dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
                        goto reschedule;
                }
                if ((statval & usbch) != usbch)
                        goto reschedule;

                msleep(CHARGER_STATUS_POLL);
        }

        ab8500_charger_usb_en(&di->usb_chg, 0, 0, 0);

        mutex_lock(&di->charger_attached_mutex);
        mutex_unlock(&di->charger_attached_mutex);

        return;

reschedule:
        queue_delayed_work(di->charger_wq,
                           &di->usb_charger_attached_work,
                           HZ);
}

static void ab8500_charger_ac_attached_work(struct work_struct *work)
{

        struct ab8500_charger *di = container_of(work,
                                                 struct ab8500_charger,
                                                 ac_charger_attached_work.work);
        int mainch = (MAIN_CH_STATUS2_MAINCHGDROP |
                      MAIN_CH_STATUS2_MAINCHARGERDETDBNC);
        int ret, i;
        u8 statval;

        for (i = 0; i < 10; i++) {
                ret = abx500_get_register_interruptible(di->dev,
                                                        AB8500_CHARGER,
                                                        AB8500_CH_STATUS2_REG,
                                                        &statval);
                if (ret < 0) {
                        dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
                        goto reschedule;
                }

                if ((statval & mainch) != mainch)
                        goto reschedule;

                msleep(CHARGER_STATUS_POLL);
        }

        ab8500_charger_ac_en(&di->ac_chg, 0, 0, 0);
        queue_work(di->charger_wq, &di->ac_work);

        mutex_lock(&di->charger_attached_mutex);
        mutex_unlock(&di->charger_attached_mutex);

        return;

reschedule:
        queue_delayed_work(di->charger_wq,
                           &di->ac_charger_attached_work,
                           HZ);
}

/**
 * ab8500_charger_detect_usb_type_work() - work to detect USB type
 * @work:       Pointer to the work_struct structure
 *
 * Detect the type of USB plugged
 */
static void ab8500_charger_detect_usb_type_work(struct work_struct *work)
{
        int ret;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, detect_usb_type_work);

        /*
         * Since we can't be sure that the events are received
         * synchronously, we have the check if is
         * connected by reading the status register
         */
        ret = ab8500_charger_detect_chargers(di, false);
        if (ret < 0)
                return;

        if (!(ret & USB_PW_CONN)) {
                dev_dbg(di->dev, "%s di->vbus_detected = false\n", __func__);
                di->vbus_detected = false;
                ab8500_charger_set_usb_connected(di, false);
                ab8500_power_supply_changed(di, di->usb_chg.psy);
        } else {
                dev_dbg(di->dev, "%s di->vbus_detected = true\n", __func__);
                di->vbus_detected = true;

                if (is_ab8500_1p1_or_earlier(di->parent)) {
                        ret = ab8500_charger_detect_usb_type(di);
                        if (!ret) {
                                ab8500_charger_set_usb_connected(di, true);
                                ab8500_power_supply_changed(di,
                                                            di->usb_chg.psy);
                        }
                } else {
                        /*
                         * For ABB cut2.0 and onwards we have an IRQ,
                         * USB_LINK_STATUS that will be triggered when the USB
                         * link status changes. The exception is USB connected
                         * during startup. Then we don't get a
                         * USB_LINK_STATUS IRQ
                         */
                        if (di->vbus_detected_start) {
                                di->vbus_detected_start = false;
                                ret = ab8500_charger_detect_usb_type(di);
                                if (!ret) {
                                        ab8500_charger_set_usb_connected(di,
                                                true);
                                        ab8500_power_supply_changed(di,
                                                di->usb_chg.psy);
                                }
                        }
                }
        }
}

/**
 * ab8500_charger_usb_link_attach_work() - work to detect USB type
 * @work:       pointer to the work_struct structure
 *
 * Detect the type of USB plugged
 */
static void ab8500_charger_usb_link_attach_work(struct work_struct *work)
{
        struct ab8500_charger *di =
                container_of(work, struct ab8500_charger, attach_work.work);
        int ret;

        /* Update maximum input current if USB enumeration is not detected */
        if (!di->usb.charger_online) {
                ret = ab8500_charger_set_vbus_in_curr(di,
                                        di->max_usb_in_curr.usb_type_max_ua);
                if (ret)
                        return;
        }

        ab8500_charger_set_usb_connected(di, true);
        ab8500_power_supply_changed(di, di->usb_chg.psy);
}

/**
 * ab8500_charger_usb_link_status_work() - work to detect USB type
 * @work:       pointer to the work_struct structure
 *
 * Detect the type of USB plugged
 */
static void ab8500_charger_usb_link_status_work(struct work_struct *work)
{
        int detected_chargers;
        int ret;
        u8 val;
        u8 link_status;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, usb_link_status_work);

        /*
         * Since we can't be sure that the events are received
         * synchronously, we have the check if  is
         * connected by reading the status register
         */
        detected_chargers = ab8500_charger_detect_chargers(di, false);
        if (detected_chargers < 0)
                return;

        /*
         * Some chargers that breaks the USB spec is
         * identified as invalid by AB8500 and it refuse
         * to start the charging process. but by jumping
         * through a few hoops it can be forced to start.
         */
        if (is_ab8500(di->parent))
                ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
                                        AB8500_USB_LINE_STAT_REG, &val);
        else
                ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
                                        AB8500_USB_LINK1_STAT_REG, &val);

        if (ret >= 0)
                dev_dbg(di->dev, "UsbLineStatus register = 0x%02x\n", val);
        else
                dev_dbg(di->dev, "Error reading USB link status\n");

        if (is_ab8500(di->parent))
                link_status = AB8500_USB_LINK_STATUS;
        else
                link_status = AB8505_USB_LINK_STATUS;

        if (detected_chargers & USB_PW_CONN) {
                if (((val & link_status) >> USB_LINK_STATUS_SHIFT) ==
                                USB_STAT_NOT_VALID_LINK &&
                                di->invalid_charger_detect_state == 0) {
                        dev_dbg(di->dev,
                                        "Invalid charger detected, state= 0\n");
                        /*Enable charger*/
                        abx500_mask_and_set_register_interruptible(di->dev,
                                        AB8500_CHARGER, AB8500_USBCH_CTRL1_REG,
                                        USB_CH_ENA, USB_CH_ENA);
                        /*Enable charger detection*/
                        abx500_mask_and_set_register_interruptible(di->dev,
                                        AB8500_USB, AB8500_USB_LINE_CTRL2_REG,
                                        USB_CH_DET, USB_CH_DET);
                        di->invalid_charger_detect_state = 1;
                        /*exit and wait for new link status interrupt.*/
                        return;

                }
                if (di->invalid_charger_detect_state == 1) {
                        dev_dbg(di->dev,
                                        "Invalid charger detected, state= 1\n");
                        /*Stop charger detection*/
                        abx500_mask_and_set_register_interruptible(di->dev,
                                        AB8500_USB, AB8500_USB_LINE_CTRL2_REG,
                                        USB_CH_DET, 0x00);
                        /*Check link status*/
                        if (is_ab8500(di->parent))
                                ret = abx500_get_register_interruptible(di->dev,
                                        AB8500_USB, AB8500_USB_LINE_STAT_REG,
                                        &val);
                        else
                                ret = abx500_get_register_interruptible(di->dev,
                                        AB8500_USB, AB8500_USB_LINK1_STAT_REG,
                                        &val);

                        dev_dbg(di->dev, "USB link status= 0x%02x\n",
                                (val & link_status) >> USB_LINK_STATUS_SHIFT);
                        di->invalid_charger_detect_state = 2;
                }
        } else {
                di->invalid_charger_detect_state = 0;
        }

        if (!(detected_chargers & USB_PW_CONN)) {
                di->vbus_detected = false;
                ab8500_charger_set_usb_connected(di, false);
                ab8500_power_supply_changed(di, di->usb_chg.psy);
                return;
        }

        dev_dbg(di->dev,"%s di->vbus_detected = true\n",__func__);
        di->vbus_detected = true;
        ret = ab8500_charger_read_usb_type(di);
        if (ret) {
                if (ret == -ENXIO) {
                        /* No valid charger type detected */
                        ab8500_charger_set_usb_connected(di, false);
                        ab8500_power_supply_changed(di, di->usb_chg.psy);
                }
                return;
        }

        if (di->usb_device_is_unrecognised) {
                dev_dbg(di->dev,
                        "Potential Legacy Charger device. "
                        "Delay work for %d msec for USB enum "
                        "to finish",
                        WAIT_ACA_RID_ENUMERATION);
                queue_delayed_work(di->charger_wq,
                                   &di->attach_work,
                                   msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION));
        } else if (di->is_aca_rid == 1) {
                /* Only wait once */
                di->is_aca_rid++;
                dev_dbg(di->dev,
                        "%s Wait %d msec for USB enum to finish",
                        __func__, WAIT_ACA_RID_ENUMERATION);
                queue_delayed_work(di->charger_wq,
                                   &di->attach_work,
                                   msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION));
        } else {
                queue_delayed_work(di->charger_wq,
                                   &di->attach_work,
                                   0);
        }
}

static void ab8500_charger_usb_state_changed_work(struct work_struct *work)
{
        int ret;
        unsigned long flags;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, usb_state_changed_work.work);

        if (!di->vbus_detected) {
                dev_dbg(di->dev,
                        "%s !di->vbus_detected\n",
                        __func__);
                return;
        }

        spin_lock_irqsave(&di->usb_state.usb_lock, flags);
        di->usb_state.state = di->usb_state.state_tmp;
        di->usb_state.usb_current_ua = di->usb_state.usb_current_tmp_ua;
        spin_unlock_irqrestore(&di->usb_state.usb_lock, flags);

        dev_dbg(di->dev, "%s USB state: 0x%02x uA: %d\n",
                __func__, di->usb_state.state, di->usb_state.usb_current_ua);

        switch (di->usb_state.state) {
        case AB8500_BM_USB_STATE_RESET_HS:
        case AB8500_BM_USB_STATE_RESET_FS:
        case AB8500_BM_USB_STATE_SUSPEND:
        case AB8500_BM_USB_STATE_MAX:
                ab8500_charger_set_usb_connected(di, false);
                ab8500_power_supply_changed(di, di->usb_chg.psy);
                break;

        case AB8500_BM_USB_STATE_RESUME:
                /*
                 * when suspend->resume there should be delay
                 * of 1sec for enabling charging
                 */
                msleep(1000);
                fallthrough;
        case AB8500_BM_USB_STATE_CONFIGURED:
                /*
                 * USB is configured, enable charging with the charging
                 * input current obtained from USB driver
                 */
                if (!ab8500_charger_get_usb_cur(di)) {
                        /* Update maximum input current */
                        ret = ab8500_charger_set_vbus_in_curr(di,
                                        di->max_usb_in_curr.usb_type_max_ua);
                        if (ret)
                                return;

                        ab8500_charger_set_usb_connected(di, true);
                        ab8500_power_supply_changed(di, di->usb_chg.psy);
                }
                break;

        default:
                break;
        }
}

/**
 * ab8500_charger_check_usbchargernotok_work() - check USB chg not ok status
 * @work:       pointer to the work_struct structure
 *
 * Work queue function for checking the USB charger Not OK status
 */
static void ab8500_charger_check_usbchargernotok_work(struct work_struct *work)
{
        int ret;
        u8 reg_value;
        bool prev_status;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, check_usbchgnotok_work.work);

        /* Check if the status bit for usbchargernotok is still active */
        ret = abx500_get_register_interruptible(di->dev,
                AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, &reg_value);
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return;
        }
        prev_status = di->flags.usbchargernotok;

        if (reg_value & VBUS_CH_NOK) {
                di->flags.usbchargernotok = true;
                /* Check again in 1sec */
                queue_delayed_work(di->charger_wq,
                        &di->check_usbchgnotok_work, HZ);
        } else {
                di->flags.usbchargernotok = false;
                di->flags.vbus_collapse = false;
        }

        if (prev_status != di->flags.usbchargernotok)
                ab8500_power_supply_changed(di, di->usb_chg.psy);
}

/**
 * ab8500_charger_check_main_thermal_prot_work() - check main thermal status
 * @work:       pointer to the work_struct structure
 *
 * Work queue function for checking the Main thermal prot status
 */
static void ab8500_charger_check_main_thermal_prot_work(
        struct work_struct *work)
{
        int ret;
        u8 reg_value;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, check_main_thermal_prot_work);

        /* Check if the status bit for main_thermal_prot is still active */
        ret = abx500_get_register_interruptible(di->dev,
                AB8500_CHARGER, AB8500_CH_STATUS2_REG, &reg_value);
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return;
        }
        if (reg_value & MAIN_CH_TH_PROT)
                di->flags.main_thermal_prot = true;
        else
                di->flags.main_thermal_prot = false;

        ab8500_power_supply_changed(di, di->ac_chg.psy);
}

/**
 * ab8500_charger_check_usb_thermal_prot_work() - check usb thermal status
 * @work:       pointer to the work_struct structure
 *
 * Work queue function for checking the USB thermal prot status
 */
static void ab8500_charger_check_usb_thermal_prot_work(
        struct work_struct *work)
{
        int ret;
        u8 reg_value;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, check_usb_thermal_prot_work);

        /* Check if the status bit for usb_thermal_prot is still active */
        ret = abx500_get_register_interruptible(di->dev,
                AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, &reg_value);
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return;
        }
        if (reg_value & USB_CH_TH_PROT)
                di->flags.usb_thermal_prot = true;
        else
                di->flags.usb_thermal_prot = false;

        ab8500_power_supply_changed(di, di->usb_chg.psy);
}

/**
 * ab8500_charger_mainchunplugdet_handler() - main charger unplugged
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "Main charger unplugged\n");
        queue_work(di->charger_wq, &di->ac_work);

        cancel_delayed_work_sync(&di->ac_charger_attached_work);
        mutex_lock(&di->charger_attached_mutex);
        mutex_unlock(&di->charger_attached_mutex);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_mainchplugdet_handler() - main charger plugged
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "Main charger plugged\n");
        queue_work(di->charger_wq, &di->ac_work);

        mutex_lock(&di->charger_attached_mutex);
        mutex_unlock(&di->charger_attached_mutex);

        if (is_ab8500(di->parent))
                queue_delayed_work(di->charger_wq,
                           &di->ac_charger_attached_work,
                           HZ);
        return IRQ_HANDLED;
}

/**
 * ab8500_charger_mainextchnotok_handler() - main charger not ok
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_mainextchnotok_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "Main charger not ok\n");
        di->flags.mainextchnotok = true;
        ab8500_power_supply_changed(di, di->ac_chg.psy);

        /* Schedule a new HW failure check */
        queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_mainchthprotr_handler() - Die temp is above main charger
 * thermal protection threshold
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_mainchthprotr_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev,
                "Die temp above Main charger thermal protection threshold\n");
        queue_work(di->charger_wq, &di->check_main_thermal_prot_work);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_mainchthprotf_handler() - Die temp is below main charger
 * thermal protection threshold
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev,
                "Die temp ok for Main charger thermal protection threshold\n");
        queue_work(di->charger_wq, &di->check_main_thermal_prot_work);

        return IRQ_HANDLED;
}

static void ab8500_charger_vbus_drop_end_work(struct work_struct *work)
{
        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, vbus_drop_end_work.work);
        int ret, curr_ua;
        u8 reg_value;

        di->flags.vbus_drop_end = false;

        /* Reset the drop counter */
        abx500_set_register_interruptible(di->dev,
                                  AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01);

        ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_CH_USBCH_STAT2_REG, &reg_value);
        if (ret < 0) {
                dev_err(di->dev, "%s read failed\n", __func__);
                return;
        }

        curr_ua = ab8500_charge_input_curr_map[
                reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT];

        if (di->max_usb_in_curr.calculated_max_ua != curr_ua) {
                /* USB source is collapsing */
                di->max_usb_in_curr.calculated_max_ua = curr_ua;
                dev_dbg(di->dev,
                         "VBUS input current limiting to %d uA\n",
                         di->max_usb_in_curr.calculated_max_ua);
        } else {
                /*
                 * USB source can not give more than this amount.
                 * Taking more will collapse the source.
                 */
                di->max_usb_in_curr.set_max_ua =
                        di->max_usb_in_curr.calculated_max_ua;
                dev_dbg(di->dev,
                         "VBUS input current limited to %d uA\n",
                         di->max_usb_in_curr.set_max_ua);
        }

        if (di->usb.charger_connected)
                ab8500_charger_set_vbus_in_curr(di,
                                        di->max_usb_in_curr.usb_type_max_ua);
}

/**
 * ab8500_charger_vbusdetf_handler() - VBUS falling detected
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        di->vbus_detected = false;
        dev_dbg(di->dev, "VBUS falling detected\n");
        queue_work(di->charger_wq, &di->detect_usb_type_work);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_vbusdetr_handler() - VBUS rising detected
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        di->vbus_detected = true;
        dev_dbg(di->dev, "VBUS rising detected\n");

        queue_work(di->charger_wq, &di->detect_usb_type_work);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_usblinkstatus_handler() - USB link status has changed
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_usblinkstatus_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "USB link status changed\n");

        queue_work(di->charger_wq, &di->usb_link_status_work);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_usbchthprotr_handler() - Die temp is above usb charger
 * thermal protection threshold
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_usbchthprotr_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev,
                "Die temp above USB charger thermal protection threshold\n");
        queue_work(di->charger_wq, &di->check_usb_thermal_prot_work);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_usbchthprotf_handler() - Die temp is below usb charger
 * thermal protection threshold
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_usbchthprotf_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev,
                "Die temp ok for USB charger thermal protection threshold\n");
        queue_work(di->charger_wq, &di->check_usb_thermal_prot_work);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_usbchargernotokr_handler() - USB charger not ok detected
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_usbchargernotokr_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "Not allowed USB charger detected\n");
        queue_delayed_work(di->charger_wq, &di->check_usbchgnotok_work, 0);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_chwdexp_handler() - Charger watchdog expired
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "Charger watchdog expired\n");

        /*
         * The charger that was online when the watchdog expired
         * needs to be restarted for charging to start again
         */
        if (di->ac.charger_online) {
                di->ac.wd_expired = true;
                ab8500_power_supply_changed(di, di->ac_chg.psy);
        }
        if (di->usb.charger_online) {
                di->usb.wd_expired = true;
                ab8500_power_supply_changed(di, di->usb_chg.psy);
        }

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_vbuschdropend_handler() - VBUS drop removed
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "VBUS charger drop ended\n");
        di->flags.vbus_drop_end = true;

        /*
         * VBUS might have dropped due to bad connection.
         * Schedule a new input limit set to the value SW requests.
         */
        queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work,
                           round_jiffies(VBUS_IN_CURR_LIM_RETRY_SET_TIME * HZ));

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_vbusovv_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "VBUS overvoltage detected\n");
        di->flags.vbus_ovv = true;
        ab8500_power_supply_changed(di, di->usb_chg.psy);

        /* Schedule a new HW failure check */
        queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_ac_get_property() - get the ac/mains properties
 * @psy:       pointer to the power_supply structure
 * @psp:       pointer to the power_supply_property structure
 * @val:       pointer to the power_supply_propval union
 *
 * This function gets called when an application tries to get the ac/mains
 * properties by reading the sysfs files.
 * AC/Mains properties are online, present and voltage.
 * online:     ac/mains charging is in progress or not
 * present:    presence of the ac/mains
 * voltage:    AC/Mains voltage
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_ac_get_property(struct power_supply *psy,
        enum power_supply_property psp,
        union power_supply_propval *val)
{
        struct ab8500_charger *di;
        int ret;

        di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy));

        switch (psp) {
        case POWER_SUPPLY_PROP_HEALTH:
                if (di->flags.mainextchnotok)
                        val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
                else if (di->ac.wd_expired || di->usb.wd_expired)
                        val->intval = POWER_SUPPLY_HEALTH_DEAD;
                else if (di->flags.main_thermal_prot)
                        val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
                else
                        val->intval = POWER_SUPPLY_HEALTH_GOOD;
                break;
        case POWER_SUPPLY_PROP_ONLINE:
                val->intval = di->ac.charger_online;
                break;
        case POWER_SUPPLY_PROP_PRESENT:
                val->intval = di->ac.charger_connected;
                break;
        case POWER_SUPPLY_PROP_VOLTAGE_NOW:
                ret = ab8500_charger_get_ac_voltage(di);
                if (ret >= 0)
                        di->ac.charger_voltage_uv = ret;
                /* On error, use previous value */
                val->intval = di->ac.charger_voltage_uv;
                break;
        case POWER_SUPPLY_PROP_VOLTAGE_AVG:
                /*
                 * This property is used to indicate when CV mode is entered
                 * for the AC charger
                 */
                di->ac.cv_active = ab8500_charger_ac_cv(di);
                val->intval = di->ac.cv_active;
                break;
        case POWER_SUPPLY_PROP_CURRENT_NOW:
                ret = ab8500_charger_get_ac_current(di);
                if (ret >= 0)
                        di->ac.charger_current_ua = ret;
                val->intval = di->ac.charger_current_ua;
                break;
        default:
                return -EINVAL;
        }
        return 0;
}

/**
 * ab8500_charger_usb_get_property() - get the usb properties
 * @psy:        pointer to the power_supply structure
 * @psp:        pointer to the power_supply_property structure
 * @val:        pointer to the power_supply_propval union
 *
 * This function gets called when an application tries to get the usb
 * properties by reading the sysfs files.
 * USB properties are online, present and voltage.
 * online:     usb charging is in progress or not
 * present:    presence of the usb
 * voltage:    vbus voltage
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_usb_get_property(struct power_supply *psy,
        enum power_supply_property psp,
        union power_supply_propval *val)
{
        struct ab8500_charger *di;
        int ret;

        di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy));

        switch (psp) {
        case POWER_SUPPLY_PROP_HEALTH:
                if (di->flags.usbchargernotok)
                        val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
                else if (di->ac.wd_expired || di->usb.wd_expired)
                        val->intval = POWER_SUPPLY_HEALTH_DEAD;
                else if (di->flags.usb_thermal_prot)
                        val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
                else if (di->flags.vbus_ovv)
                        val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
                else
                        val->intval = POWER_SUPPLY_HEALTH_GOOD;
                break;
        case POWER_SUPPLY_PROP_ONLINE:
                val->intval = di->usb.charger_online;
                break;
        case POWER_SUPPLY_PROP_PRESENT:
                val->intval = di->usb.charger_connected;
                break;
        case POWER_SUPPLY_PROP_VOLTAGE_NOW:
                ret = ab8500_charger_get_vbus_voltage(di);
                if (ret >= 0)
                        di->usb.charger_voltage_uv = ret;
                val->intval = di->usb.charger_voltage_uv;
                break;
        case POWER_SUPPLY_PROP_VOLTAGE_AVG:
                /*
                 * This property is used to indicate when CV mode is entered
                 * for the USB charger
                 */
                di->usb.cv_active = ab8500_charger_usb_cv(di);
                val->intval = di->usb.cv_active;
                break;
        case POWER_SUPPLY_PROP_CURRENT_NOW:
                ret = ab8500_charger_get_usb_current(di);
                if (ret >= 0)
                        di->usb.charger_current_ua = ret;
                val->intval = di->usb.charger_current_ua;
                break;
        case POWER_SUPPLY_PROP_CURRENT_AVG:
                /*
                 * This property is used to indicate when VBUS has collapsed
                 * due to too high output current from the USB charger
                 */
                if (di->flags.vbus_collapse)
                        val->intval = 1;
                else
                        val->intval = 0;
                break;
        default:
                return -EINVAL;
        }
        return 0;
}

/**
 * ab8500_charger_init_hw_registers() - Set up charger related registers
 * @di:         pointer to the ab8500_charger structure
 *
 * Set up charger OVV, watchdog and maximum voltage registers as well as
 * charging of the backup battery
 */
static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
{
        int ret = 0;

        /* Setup maximum charger current and voltage for ABB cut2.0 */
        if (!is_ab8500_1p1_or_earlier(di->parent)) {
                ret = abx500_set_register_interruptible(di->dev,
                        AB8500_CHARGER,
                        AB8500_CH_VOLT_LVL_MAX_REG, CH_VOL_LVL_4P6);
                if (ret) {
                        dev_err(di->dev,
                                "failed to set CH_VOLT_LVL_MAX_REG\n");
                        goto out;
                }

                ret = abx500_set_register_interruptible(di->dev,
                        AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG,
                        CH_OP_CUR_LVL_1P6);
                if (ret) {
                        dev_err(di->dev,
                                "failed to set CH_OPT_CRNTLVL_MAX_REG\n");
                        goto out;
                }
        }

        if (is_ab8505_2p0(di->parent))
                ret = abx500_mask_and_set_register_interruptible(di->dev,
                        AB8500_CHARGER,
                        AB8500_USBCH_CTRL2_REG,
                        VBUS_AUTO_IN_CURR_LIM_ENA,
                        VBUS_AUTO_IN_CURR_LIM_ENA);
        else
                /*
                 * VBUS OVV set to 6.3V and enable automatic current limitation
                 */
                ret = abx500_set_register_interruptible(di->dev,
                        AB8500_CHARGER,
                        AB8500_USBCH_CTRL2_REG,
                        VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA);
        if (ret) {
                dev_err(di->dev,
                        "failed to set automatic current limitation\n");
                goto out;
        }

        /* Enable main watchdog in OTP */
        ret = abx500_set_register_interruptible(di->dev,
                AB8500_OTP_EMUL, AB8500_OTP_CONF_15, OTP_ENABLE_WD);
        if (ret) {
                dev_err(di->dev, "failed to enable main WD in OTP\n");
                goto out;
        }

        /* Enable main watchdog */
        ret = abx500_set_register_interruptible(di->dev,
                AB8500_SYS_CTRL2_BLOCK,
                AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_ENA);
        if (ret) {
                dev_err(di->dev, "failed to enable main watchdog\n");
                goto out;
        }

        /*
         * Due to internal synchronisation, Enable and Kick watchdog bits
         * cannot be enabled in a single write.
         * A minimum delay of 2*32 kHz period (62.5µs) must be inserted
         * between writing Enable then Kick bits.
         */
        udelay(63);

        /* Kick main watchdog */
        ret = abx500_set_register_interruptible(di->dev,
                AB8500_SYS_CTRL2_BLOCK,
                AB8500_MAIN_WDOG_CTRL_REG,
                (MAIN_WDOG_ENA | MAIN_WDOG_KICK));
        if (ret) {
                dev_err(di->dev, "failed to kick main watchdog\n");
                goto out;
        }

        /* Disable main watchdog */
        ret = abx500_set_register_interruptible(di->dev,
                AB8500_SYS_CTRL2_BLOCK,
                AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_DIS);
        if (ret) {
                dev_err(di->dev, "failed to disable main watchdog\n");
                goto out;
        }

        /* Set watchdog timeout */
        ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                AB8500_CH_WD_TIMER_REG, WD_TIMER);
        if (ret) {
                dev_err(di->dev, "failed to set charger watchdog timeout\n");
                goto out;
        }

        ret = ab8500_charger_led_en(di, false);
        if (ret < 0) {
                dev_err(di->dev, "failed to disable LED\n");
                goto out;
        }

        ret = abx500_set_register_interruptible(di->dev,
                AB8500_RTC,
                AB8500_RTC_BACKUP_CHG_REG,
                (di->bm->bkup_bat_v & 0x3) | di->bm->bkup_bat_i);
        if (ret) {
                dev_err(di->dev, "failed to setup backup battery charging\n");
                goto out;
        }

        /* Enable backup battery charging */
        ret = abx500_mask_and_set_register_interruptible(di->dev,
                AB8500_RTC, AB8500_RTC_CTRL_REG,
                RTC_BUP_CH_ENA, RTC_BUP_CH_ENA);
        if (ret < 0) {
                dev_err(di->dev, "%s mask and set failed\n", __func__);
                goto out;
        }

out:
        return ret;
}

/*
 * ab8500 charger driver interrupts and their respective isr
 */
static struct ab8500_charger_interrupts ab8500_charger_irq[] = {
        {"MAIN_CH_UNPLUG_DET", ab8500_charger_mainchunplugdet_handler},
        {"MAIN_CHARGE_PLUG_DET", ab8500_charger_mainchplugdet_handler},
        {"MAIN_EXT_CH_NOT_OK", ab8500_charger_mainextchnotok_handler},
        {"MAIN_CH_TH_PROT_R", ab8500_charger_mainchthprotr_handler},
        {"MAIN_CH_TH_PROT_F", ab8500_charger_mainchthprotf_handler},
        {"VBUS_DET_F", ab8500_charger_vbusdetf_handler},
        {"VBUS_DET_R", ab8500_charger_vbusdetr_handler},
        {"USB_LINK_STATUS", ab8500_charger_usblinkstatus_handler},
        {"USB_CH_TH_PROT_R", ab8500_charger_usbchthprotr_handler},
        {"USB_CH_TH_PROT_F", ab8500_charger_usbchthprotf_handler},
        {"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler},
        {"VBUS_OVV", ab8500_charger_vbusovv_handler},
        {"CH_WD_EXP", ab8500_charger_chwdexp_handler},
        {"VBUS_CH_DROP_END", ab8500_charger_vbuschdropend_handler},
};

static int ab8500_charger_usb_notifier_call(struct notifier_block *nb,
                unsigned long event, void *power)
{
        struct ab8500_charger *di =
                container_of(nb, struct ab8500_charger, nb);
        enum ab8500_usb_state bm_usb_state;
        /*
         * FIXME: it appears the AB8500 PHY never sends what it should here.
         * Fix the PHY driver to properly notify the desired current.
         * Also broadcast microampere and not milliampere.
         */
        unsigned mA = *((unsigned *)power);

        if (event != USB_EVENT_VBUS) {
                dev_dbg(di->dev, "not a standard host, returning\n");
                return NOTIFY_DONE;
        }

        /* TODO: State is fabricate  here. See if charger really needs USB
         * state or if mA is enough
         */
        if ((di->usb_state.usb_current_ua == 2000) && (mA > 2))
                bm_usb_state = AB8500_BM_USB_STATE_RESUME;
        else if (mA == 0)
                bm_usb_state = AB8500_BM_USB_STATE_RESET_HS;
        else if (mA == 2)
                bm_usb_state = AB8500_BM_USB_STATE_SUSPEND;
        else if (mA >= 8) /* 8, 100, 500 */
                bm_usb_state = AB8500_BM_USB_STATE_CONFIGURED;
        else /* Should never occur */
                bm_usb_state = AB8500_BM_USB_STATE_RESET_FS;

        dev_dbg(di->dev, "%s usb_state: 0x%02x mA: %d\n",
                __func__, bm_usb_state, mA);

        spin_lock(&di->usb_state.usb_lock);
        di->usb_state.state_tmp = bm_usb_state;
        /* FIXME: broadcast ua instead, see above */
        di->usb_state.usb_current_tmp_ua = mA * 1000;
        spin_unlock(&di->usb_state.usb_lock);

        /*
         * wait for some time until you get updates from the usb stack
         * and negotiations are completed
         */
        queue_delayed_work(di->charger_wq, &di->usb_state_changed_work, HZ/2);

        return NOTIFY_OK;
}

static int __maybe_unused ab8500_charger_resume(struct device *dev)
{
        int ret;
        struct ab8500_charger *di = dev_get_drvdata(dev);

        /*
         * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
         * logic. That means we have to continuously kick the charger
         * watchdog even when no charger is connected. This is only
         * valid once the AC charger has been enabled. This is
         * a bug that is not handled by the algorithm and the
         * watchdog have to be kicked by the charger driver
         * when the AC charger is disabled
         */
        if (di->ac_conn && is_ab8500_1p1_or_earlier(di->parent)) {
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
                if (ret)
                        dev_err(di->dev, "Failed to kick WD!\n");

                /* If not already pending start a new timer */
                queue_delayed_work(di->charger_wq, &di->kick_wd_work,
                                   round_jiffies(WD_KICK_INTERVAL));
        }

        /* If we still have a HW failure, schedule a new check */
        if (di->flags.mainextchnotok || di->flags.vbus_ovv) {
                queue_delayed_work(di->charger_wq,
                        &di->check_hw_failure_work, 0);
        }

        if (di->flags.vbus_drop_end)
                queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, 0);

        return 0;
}

static int __maybe_unused ab8500_charger_suspend(struct device *dev)
{
        struct ab8500_charger *di = dev_get_drvdata(dev);

        /* Cancel any pending jobs */
        cancel_delayed_work(&di->check_hw_failure_work);
        cancel_delayed_work(&di->vbus_drop_end_work);

        flush_delayed_work(&di->attach_work);
        flush_delayed_work(&di->usb_charger_attached_work);
        flush_delayed_work(&di->ac_charger_attached_work);
        flush_delayed_work(&di->check_usbchgnotok_work);
        flush_delayed_work(&di->check_vbat_work);
        flush_delayed_work(&di->kick_wd_work);

        flush_work(&di->usb_link_status_work);
        flush_work(&di->ac_work);
        flush_work(&di->detect_usb_type_work);

        if (atomic_read(&di->current_stepping_sessions))
                return -EAGAIN;

        return 0;
}

static char *supply_interface[] = {
        "ab8500_chargalg",
        "ab8500_fg",
        "ab8500_btemp",
};

static const struct power_supply_desc ab8500_ac_chg_desc = {
        .name           = "ab8500_ac",
        .type           = POWER_SUPPLY_TYPE_MAINS,
        .properties     = ab8500_charger_ac_props,
        .num_properties = ARRAY_SIZE(ab8500_charger_ac_props),
        .get_property   = ab8500_charger_ac_get_property,
};

static const struct power_supply_desc ab8500_usb_chg_desc = {
        .name           = "ab8500_usb",
        .type           = POWER_SUPPLY_TYPE_USB,
        .properties     = ab8500_charger_usb_props,
        .num_properties = ARRAY_SIZE(ab8500_charger_usb_props),
        .get_property   = ab8500_charger_usb_get_property,
};

static int ab8500_charger_bind(struct device *dev)
{
        struct ab8500_charger *di = dev_get_drvdata(dev);
        int ch_stat;
        int ret;

        /* Create a work queue for the charger */
        di->charger_wq = alloc_ordered_workqueue("ab8500_charger_wq",
                                                 WQ_MEM_RECLAIM);
        if (di->charger_wq == NULL) {
                dev_err(dev, "failed to create work queue\n");
                return -ENOMEM;
        }

        ch_stat = ab8500_charger_detect_chargers(di, false);

        if (ch_stat & AC_PW_CONN) {
                if (is_ab8500(di->parent))
                        queue_delayed_work(di->charger_wq,
                                           &di->ac_charger_attached_work,
                                           HZ);
        }
        if (ch_stat & USB_PW_CONN) {
                if (is_ab8500(di->parent))
                        queue_delayed_work(di->charger_wq,
                                           &di->usb_charger_attached_work,
                                           HZ);
                di->vbus_detected = true;
                di->vbus_detected_start = true;
                queue_work(di->charger_wq,
                           &di->detect_usb_type_work);
        }

        ret = component_bind_all(dev, di);
        if (ret) {
                dev_err(dev, "can't bind component devices\n");
                destroy_workqueue(di->charger_wq);
                return ret;
        }

        return 0;
}

static void ab8500_charger_unbind(struct device *dev)
{
        struct ab8500_charger *di = dev_get_drvdata(dev);
        int ret;

        /* Disable AC charging */
        ab8500_charger_ac_en(&di->ac_chg, false, 0, 0);

        /* Disable USB charging */
        ab8500_charger_usb_en(&di->usb_chg, false, 0, 0);

        /* Backup battery voltage and current disable */
        ret = abx500_mask_and_set_register_interruptible(di->dev,
                AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0);
        if (ret < 0)
                dev_err(di->dev, "%s mask and set failed\n", __func__);

        /* Delete the work queue */
        destroy_workqueue(di->charger_wq);

        /* Unbind fg, btemp, algorithm */
        component_unbind_all(dev, di);
}

static const struct component_master_ops ab8500_charger_comp_ops = {
        .bind = ab8500_charger_bind,
        .unbind = ab8500_charger_unbind,
};

static struct platform_driver *const ab8500_charger_component_drivers[] = {
        &ab8500_fg_driver,
        &ab8500_btemp_driver,
        &ab8500_chargalg_driver,
};

static int ab8500_charger_probe(struct platform_device *pdev)
{
        struct device *dev = &pdev->dev;
        struct device_node *np = dev->of_node;
        struct component_match *match = NULL;
        struct power_supply_config ac_psy_cfg = {}, usb_psy_cfg = {};
        struct ab8500_charger *di;
        int charger_status;
        int i, irq;
        int ret;

        di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
        if (!di)
                return -ENOMEM;

        di->bm = &ab8500_bm_data;

        di->autopower_cfg = of_property_read_bool(np, "autopower_cfg");

        /* get parent data */
        di->dev = dev;
        di->parent = dev_get_drvdata(pdev->dev.parent);

        /* Get ADC channels */
        if (!is_ab8505(di->parent)) {
                di->adc_main_charger_v = devm_iio_channel_get(dev, "main_charger_v");
                if (IS_ERR(di->adc_main_charger_v)) {
                        ret = dev_err_probe(dev, PTR_ERR(di->adc_main_charger_v),
                                            "failed to get ADC main charger voltage\n");
                        return ret;
                }
                di->adc_main_charger_c = devm_iio_channel_get(dev, "main_charger_c");
                if (IS_ERR(di->adc_main_charger_c)) {
                        ret = dev_err_probe(dev, PTR_ERR(di->adc_main_charger_c),
                                            "failed to get ADC main charger current\n");
                        return ret;
                }
        }
        di->adc_vbus_v = devm_iio_channel_get(dev, "vbus_v");
        if (IS_ERR(di->adc_vbus_v)) {
                ret = dev_err_probe(dev, PTR_ERR(di->adc_vbus_v),
                                    "failed to get ADC USB charger voltage\n");
                return ret;
        }
        di->adc_usb_charger_c = devm_iio_channel_get(dev, "usb_charger_c");
        if (IS_ERR(di->adc_usb_charger_c)) {
                ret = dev_err_probe(dev, PTR_ERR(di->adc_usb_charger_c),
                                    "failed to get ADC USB charger current\n");
                return ret;
        }

        /*
         * VDD ADC supply needs to be enabled from this driver when there
         * is a charger connected to avoid erroneous BTEMP_HIGH/LOW
         * interrupts during charging
         */
        di->regu = devm_regulator_get(dev, "vddadc");
        if (IS_ERR(di->regu)) {
                ret = PTR_ERR(di->regu);
                dev_err(dev, "failed to get vddadc regulator\n");
                return ret;
        }

        /* initialize lock */
        spin_lock_init(&di->usb_state.usb_lock);
        mutex_init(&di->usb_ipt_crnt_lock);

        di->autopower = false;
        di->invalid_charger_detect_state = 0;

        /* AC and USB supply config */
        ac_psy_cfg.fwnode = dev_fwnode(dev);
        ac_psy_cfg.supplied_to = supply_interface;
        ac_psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
        ac_psy_cfg.drv_data = &di->ac_chg;
        usb_psy_cfg.fwnode = dev_fwnode(dev);
        usb_psy_cfg.supplied_to = supply_interface;
        usb_psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
        usb_psy_cfg.drv_data = &di->usb_chg;

        /* AC supply */
        /* ux500_charger sub-class */
        di->ac_chg.ops.enable = &ab8500_charger_ac_en;
        di->ac_chg.ops.check_enable = &ab8500_charger_ac_check_enable;
        di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
        di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current;
        di->ac_chg.max_out_volt_uv = ab8500_charger_voltage_map[
                ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
        di->ac_chg.max_out_curr_ua =
                ab8500_charge_output_curr_map[ARRAY_SIZE(ab8500_charge_output_curr_map) - 1];
        di->ac_chg.wdt_refresh = CHG_WD_INTERVAL;
        /*
         * The AB8505 only supports USB charging. If we are not the
         * AB8505, register an AC charger.
         *
         * TODO: if this should be opt-in, add DT properties for this.
         */
        if (!is_ab8505(di->parent))
                di->ac_chg.enabled = true;

        /* USB supply */
        /* ux500_charger sub-class */
        di->usb_chg.ops.enable = &ab8500_charger_usb_en;
        di->usb_chg.ops.check_enable = &ab8500_charger_usb_check_enable;
        di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
        di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current;
        di->usb_chg.max_out_volt_uv = ab8500_charger_voltage_map[
                ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
        di->usb_chg.max_out_curr_ua =
                ab8500_charge_output_curr_map[ARRAY_SIZE(ab8500_charge_output_curr_map) - 1];
        di->usb_chg.wdt_refresh = CHG_WD_INTERVAL;
        di->usb_state.usb_current_ua = -1;

        mutex_init(&di->charger_attached_mutex);

        /* Init work for HW failure check */
        INIT_DEFERRABLE_WORK(&di->check_hw_failure_work,
                ab8500_charger_check_hw_failure_work);
        INIT_DEFERRABLE_WORK(&di->check_usbchgnotok_work,
                ab8500_charger_check_usbchargernotok_work);

        INIT_DELAYED_WORK(&di->ac_charger_attached_work,
                          ab8500_charger_ac_attached_work);
        INIT_DELAYED_WORK(&di->usb_charger_attached_work,
                          ab8500_charger_usb_attached_work);

        /*
         * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
         * logic. That means we have to continuously kick the charger
         * watchdog even when no charger is connected. This is only
         * valid once the AC charger has been enabled. This is
         * a bug that is not handled by the algorithm and the
         * watchdog have to be kicked by the charger driver
         * when the AC charger is disabled
         */
        INIT_DEFERRABLE_WORK(&di->kick_wd_work,
                ab8500_charger_kick_watchdog_work);

        INIT_DEFERRABLE_WORK(&di->check_vbat_work,
                ab8500_charger_check_vbat_work);

        INIT_DELAYED_WORK(&di->attach_work,
                ab8500_charger_usb_link_attach_work);

        INIT_DELAYED_WORK(&di->usb_state_changed_work,
                ab8500_charger_usb_state_changed_work);

        INIT_DELAYED_WORK(&di->vbus_drop_end_work,
                ab8500_charger_vbus_drop_end_work);

        /* Init work for charger detection */
        INIT_WORK(&di->usb_link_status_work,
                ab8500_charger_usb_link_status_work);
        INIT_WORK(&di->ac_work, ab8500_charger_ac_work);
        INIT_WORK(&di->detect_usb_type_work,
                ab8500_charger_detect_usb_type_work);

        /* Init work for checking HW status */
        INIT_WORK(&di->check_main_thermal_prot_work,
                ab8500_charger_check_main_thermal_prot_work);
        INIT_WORK(&di->check_usb_thermal_prot_work,
                ab8500_charger_check_usb_thermal_prot_work);


        /* Initialize OVV, and other registers */
        ret = ab8500_charger_init_hw_registers(di);
        if (ret) {
                dev_err(dev, "failed to initialize ABB registers\n");
                return ret;
        }

        /* Register AC charger class */
        if (di->ac_chg.enabled) {
                di->ac_chg.psy = devm_power_supply_register(dev,
                                                       &ab8500_ac_chg_desc,
                                                       &ac_psy_cfg);
                if (IS_ERR(di->ac_chg.psy)) {
                        dev_err(dev, "failed to register AC charger\n");
                        return PTR_ERR(di->ac_chg.psy);
                }
        }

        /* Register USB charger class */
        di->usb_chg.psy = devm_power_supply_register(dev,
                                                     &ab8500_usb_chg_desc,
                                                     &usb_psy_cfg);
        if (IS_ERR(di->usb_chg.psy)) {
                dev_err(dev, "failed to register USB charger\n");
                return PTR_ERR(di->usb_chg.psy);
        }

        /* Request interrupts */
        for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) {
                irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
                if (irq < 0)
                        return irq;

                ret = devm_request_threaded_irq(dev,
                        irq, NULL, ab8500_charger_irq[i].isr,
                        IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
                        ab8500_charger_irq[i].name, di);

                if (ret != 0) {
                        dev_err(dev, "failed to request %s IRQ %d: %d\n"
                                , ab8500_charger_irq[i].name, irq, ret);
                        return ret;
                }
                dev_dbg(dev, "Requested %s IRQ %d: %d\n",
                        ab8500_charger_irq[i].name, irq, ret);
        }

        /*
         * Check what battery we have, since we always have the USB
         * psy, use that as a handle.
         */
        ret = ab8500_bm_of_probe(di->usb_chg.psy, di->bm);
        if (ret)
                return dev_err_probe(dev, ret,
                                     "failed to get battery information\n");

        /* Identify the connected charger types during startup */
        charger_status = ab8500_charger_detect_chargers(di, true);
        if (charger_status & AC_PW_CONN) {
                di->ac.charger_connected = 1;
                di->ac_conn = true;
                ab8500_power_supply_changed(di, di->ac_chg.psy);
                sysfs_notify(&di->ac_chg.psy->dev.kobj, NULL, "present");
        }

        platform_set_drvdata(pdev, di);

        /* Create something that will match the subdrivers when we bind */
        for (i = 0; i < ARRAY_SIZE(ab8500_charger_component_drivers); i++) {
                struct device_driver *drv = &ab8500_charger_component_drivers[i]->driver;
                struct device *p = NULL, *d;

                while ((d = platform_find_device_by_driver(p, drv))) {
                        put_device(p);
                        component_match_add(dev, &match, component_compare_dev, d);
                        p = d;
                }
                put_device(p);
        }
        if (!match) {
                dev_err(dev, "no matching components\n");
                ret = -ENODEV;
                goto remove_ab8500_bm;
        }
        if (IS_ERR(match)) {
                dev_err(dev, "could not create component match\n");
                ret = PTR_ERR(match);
                goto remove_ab8500_bm;
        }

        di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
        if (IS_ERR_OR_NULL(di->usb_phy)) {
                dev_err(dev, "failed to get usb transceiver\n");
                ret = -EINVAL;
                goto remove_ab8500_bm;
        }
        di->nb.notifier_call = ab8500_charger_usb_notifier_call;
        ret = usb_register_notifier(di->usb_phy, &di->nb);
        if (ret) {
                dev_err(dev, "failed to register usb notifier\n");
                goto put_usb_phy;
        }

        ret = component_master_add_with_match(&pdev->dev,
                                              &ab8500_charger_comp_ops,
                                              match);
        if (ret) {
                dev_err(dev, "failed to add component master\n");
                goto free_notifier;
        }

        return 0;

free_notifier:
        usb_unregister_notifier(di->usb_phy, &di->nb);
put_usb_phy:
        usb_put_phy(di->usb_phy);
remove_ab8500_bm:
        ab8500_bm_of_remove(di->usb_chg.psy, di->bm);
        return ret;
}

static void ab8500_charger_remove(struct platform_device *pdev)
{
        struct ab8500_charger *di = platform_get_drvdata(pdev);

        component_master_del(&pdev->dev, &ab8500_charger_comp_ops);

        usb_unregister_notifier(di->usb_phy, &di->nb);
        ab8500_bm_of_remove(di->usb_chg.psy, di->bm);
        usb_put_phy(di->usb_phy);
}

static SIMPLE_DEV_PM_OPS(ab8500_charger_pm_ops, ab8500_charger_suspend, ab8500_charger_resume);

static const struct of_device_id ab8500_charger_match[] = {
        { .compatible = "stericsson,ab8500-charger", },
        { },
};
MODULE_DEVICE_TABLE(of, ab8500_charger_match);

static struct platform_driver ab8500_charger_driver = {
        .probe = ab8500_charger_probe,
        .remove = ab8500_charger_remove,
        .driver = {
                .name = "ab8500-charger",
                .of_match_table = ab8500_charger_match,
                .pm = &ab8500_charger_pm_ops,
        },
};

static int __init ab8500_charger_init(void)
{
        int ret;

        ret = platform_register_drivers(ab8500_charger_component_drivers,
                        ARRAY_SIZE(ab8500_charger_component_drivers));
        if (ret)
                return ret;

        ret = platform_driver_register(&ab8500_charger_driver);
        if (ret) {
                platform_unregister_drivers(ab8500_charger_component_drivers,
                                ARRAY_SIZE(ab8500_charger_component_drivers));
                return ret;
        }

        return 0;
}

static void __exit ab8500_charger_exit(void)
{
        platform_unregister_drivers(ab8500_charger_component_drivers,
                        ARRAY_SIZE(ab8500_charger_component_drivers));
        platform_driver_unregister(&ab8500_charger_driver);
}

module_init(ab8500_charger_init);
module_exit(ab8500_charger_exit);

MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy");
MODULE_ALIAS("platform:ab8500-charger");
MODULE_DESCRIPTION("AB8500 charger management driver");