/* SPDX-License-Identifier: GPL-2.0 */
/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *
 ******************************************************************************/
#ifndef __RTW_EEPROM_H__
#define __RTW_EEPROM_H__


#define RTL8712_EEPROM_ID                       0x8712
/* define       EEPROM_MAX_SIZE                 256 */

#define HWSET_MAX_SIZE_128              128
#define HWSET_MAX_SIZE_256              256
#define HWSET_MAX_SIZE_512              512

#define EEPROM_MAX_SIZE                 HWSET_MAX_SIZE_512

#define CLOCK_RATE                                      50                      /* 100us */

/*  EEPROM opcodes */
#define EEPROM_READ_OPCODE              06
#define EEPROM_WRITE_OPCODE             05
#define EEPROM_ERASE_OPCODE             07
#define EEPROM_EWEN_OPCODE              19      /*  Erase/write enable */
#define EEPROM_EWDS_OPCODE              16      /*  Erase/write disable */

/* Country codes */
#define USA                                                     0x555320
#define EUROPE                                          0x1 /* temp, should be provided later */
#define JAPAN                                           0x2 /* temp, should be provided later */

#define eeprom_cis0_sz  17
#define eeprom_cis1_sz  50

/*  */
/*  Customer ID, note that: */
/*  This variable is initiailzed through EEPROM or registry, */
/*  however, its definition may be different with that in EEPROM for */
/*  EEPROM size consideration. So, we have to perform proper translation between them. */
/*  Besides, CustomerID of registry has precedence of that of EEPROM. */
/*  defined below. 060703, by rcnjko. */
/*  */
enum {
        RT_CID_DEFAULT = 0,
        RT_CID_8187_ALPHA0 = 1,
        RT_CID_8187_SERCOMM_PS = 2,
        RT_CID_8187_HW_LED = 3,
        RT_CID_8187_NETGEAR = 4,
        RT_CID_WHQL = 5,
        RT_CID_819x_CAMEO  = 6,
        RT_CID_819x_RUNTOP = 7,
        RT_CID_819x_Senao = 8,
        RT_CID_TOSHIBA = 9,     /*  Merge by Jacken, 2008/01/31. */
        RT_CID_819x_Netcore = 10,
        RT_CID_Nettronix = 11,
        RT_CID_DLINK = 12,
        RT_CID_PRONET = 13,
        RT_CID_COREGA = 14,
        RT_CID_CHINA_MOBILE = 15,
        RT_CID_819x_ALPHA = 16,
        RT_CID_819x_Sitecom = 17,
        RT_CID_CCX = 18, /*  It's set under CCX logo test and isn't demanded for CCX functions, but for test behavior like retry limit and tx report. By Bruce, 2009-02-17. */
        RT_CID_819x_Lenovo = 19,
        RT_CID_819x_QMI = 20,
        RT_CID_819x_Edimax_Belkin = 21,
        RT_CID_819x_Sercomm_Belkin = 22,
        RT_CID_819x_CAMEO1 = 23,
        RT_CID_819x_MSI = 24,
        RT_CID_819x_Acer = 25,
        RT_CID_819x_AzWave_ASUS = 26,
        RT_CID_819x_AzWave = 27, /*  For AzWave in PCIe, The ID is AzWave use and not only Asus */
        RT_CID_819x_HP = 28,
        RT_CID_819x_WNC_COREGA = 29,
        RT_CID_819x_Arcadyan_Belkin = 30,
        RT_CID_819x_SAMSUNG = 31,
        RT_CID_819x_CLEVO = 32,
        RT_CID_819x_DELL = 33,
        RT_CID_819x_PRONETS = 34,
        RT_CID_819x_Edimax_ASUS = 35,
        RT_CID_NETGEAR = 36,
        RT_CID_PLANEX = 37,
        RT_CID_CC_C = 38,
        RT_CID_819x_Xavi = 39,
        RT_CID_LENOVO_CHINA = 40,
        RT_CID_INTEL_CHINA = 41,
        RT_CID_TPLINK_HPWR = 42,
        RT_CID_819x_Sercomm_Netgear = 43,
        RT_CID_819x_ALPHA_Dlink = 44,/* add by ylb 20121012 for customer led for alpha */
        RT_CID_WNC_NEC = 45,/* add by page for NEC */
        RT_CID_DNI_BUFFALO = 46,/* add by page for NEC */
};

struct eeprom_priv {
        u8 bautoload_fail_flag;
        u8 bloadfile_fail_flag;
        u8 bloadmac_fail_flag;
        u8 EepromOrEfuse;

        u8 mac_addr[6]; /* PermanentAddress */

        u16     channel_plan;
        u16     CustomerID;

        u8 efuse_eeprom_data[EEPROM_MAX_SIZE]; /* 92C:256bytes, 88E:512bytes, we use union set (512bytes) */
        u8 adjuseVoltageVal;

        u8 EEPROMRFGainOffset;
        u8 EEPROMRFGainVal;

        u8 sdio_setting;
        u32     ocr;
        u8 cis0[eeprom_cis0_sz];
        u8 cis1[eeprom_cis1_sz];
};

#endif  /* __RTL871X_EEPROM_H__ */