root/kernel/power/power.h
/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/suspend.h>
#include <linux/suspend_ioctls.h>
#include <linux/utsname.h>
#include <linux/freezer.h>
#include <linux/compiler.h>
#include <linux/cpu.h>
#include <linux/cpuidle.h>
#include <linux/crypto.h>

struct swsusp_info {
        struct new_utsname      uts;
        u32                     version_code;
        unsigned long           num_physpages;
        int                     cpus;
        unsigned long           image_pages;
        unsigned long           pages;
        unsigned long           size;
} __aligned(PAGE_SIZE);

#if defined(CONFIG_SUSPEND) || defined(CONFIG_HIBERNATION)
extern int pm_sleep_fs_sync(void);
extern bool filesystem_freeze_enabled;
#endif

#ifdef CONFIG_HIBERNATION
/* kernel/power/snapshot.c */
extern void __init hibernate_reserved_size_init(void);
extern void __init hibernate_image_size_init(void);

#ifdef CONFIG_ARCH_HIBERNATION_HEADER
/* Maximum size of architecture specific data in a hibernation header */
#define MAX_ARCH_HEADER_SIZE    (sizeof(struct new_utsname) + 4)

static inline int init_header_complete(struct swsusp_info *info)
{
        return arch_hibernation_header_save(info, MAX_ARCH_HEADER_SIZE);
}

static inline const char *check_image_kernel(struct swsusp_info *info)
{
        return arch_hibernation_header_restore(info) ?
                        "architecture specific data" : NULL;
}
#endif /* CONFIG_ARCH_HIBERNATION_HEADER */

/*
 * Keep some memory free so that I/O operations can succeed without paging
 * [Might this be more than 4 MB?]
 */
#define PAGES_FOR_IO    ((4096 * 1024) >> PAGE_SHIFT)

/*
 * Keep 1 MB of memory free so that device drivers can allocate some pages in
 * their .suspend() routines without breaking the suspend to disk.
 */
#define SPARE_PAGES     ((1024 * 1024) >> PAGE_SHIFT)

asmlinkage int swsusp_save(void);

/* kernel/power/hibernate.c */
extern bool freezer_test_done;
extern char hib_comp_algo[CRYPTO_MAX_ALG_NAME];

/* kernel/power/swap.c */
extern unsigned int swsusp_header_flags;

extern int hibernation_snapshot(int platform_mode);
extern int hibernation_restore(int platform_mode);
extern int hibernation_platform_enter(void);

#ifdef CONFIG_STRICT_KERNEL_RWX
/* kernel/power/snapshot.c */
extern void enable_restore_image_protection(void);
#else
static inline void enable_restore_image_protection(void) {}
#endif /* CONFIG_STRICT_KERNEL_RWX */

extern bool hibernation_in_progress(void);

#else /* !CONFIG_HIBERNATION */

static inline void hibernate_reserved_size_init(void) {}
static inline void hibernate_image_size_init(void) {}

static inline bool hibernation_in_progress(void) { return false; }
#endif /* !CONFIG_HIBERNATION */

#define power_attr(_name) \
static struct kobj_attribute _name##_attr = {   \
        .attr   = {                             \
                .name = __stringify(_name),     \
                .mode = 0644,                   \
        },                                      \
        .show   = _name##_show,                 \
        .store  = _name##_store,                \
}

#define power_attr_ro(_name) \
static struct kobj_attribute _name##_attr = {   \
        .attr   = {                             \
                .name = __stringify(_name),     \
                .mode = S_IRUGO,                \
        },                                      \
        .show   = _name##_show,                 \
}

/* Preferred image size in bytes (default 500 MB) */
extern unsigned long image_size;
/* Size of memory reserved for drivers (default SPARE_PAGES x PAGE_SIZE) */
extern unsigned long reserved_size;
extern int in_suspend;
extern dev_t swsusp_resume_device;
extern sector_t swsusp_resume_block;

extern int create_basic_memory_bitmaps(void);
extern void free_basic_memory_bitmaps(void);
extern int hibernate_preallocate_memory(void);

extern void clear_or_poison_free_pages(void);

/*
 *      Auxiliary structure used for reading the snapshot image data and
 *      metadata from and writing them to the list of page backup entries
 *      (PBEs) which is the main data structure of swsusp.
 *
 *      Using struct snapshot_handle we can transfer the image, including its
 *      metadata, as a continuous sequence of bytes with the help of
 *      snapshot_read_next() and snapshot_write_next().
 *
 *      The code that writes the image to a storage or transfers it to
 *      the user land is required to use snapshot_read_next() for this
 *      purpose and it should not make any assumptions regarding the internal
 *      structure of the image.  Similarly, the code that reads the image from
 *      a storage or transfers it from the user land is required to use
 *      snapshot_write_next().
 *
 *      This may allow us to change the internal structure of the image
 *      in the future with considerably less effort.
 */

struct snapshot_handle {
        unsigned int    cur;    /* number of the block of PAGE_SIZE bytes the
                                 * next operation will refer to (ie. current)
                                 */
        void            *buffer;        /* address of the block to read from
                                         * or write to
                                         */
        int             sync_read;      /* Set to one to notify the caller of
                                         * snapshot_write_next() that it may
                                         * need to call wait_on_bio_chain()
                                         */
};

/* This macro returns the address from/to which the caller of
 * snapshot_read_next()/snapshot_write_next() is allowed to
 * read/write data after the function returns
 */
#define data_of(handle) ((handle).buffer)

extern unsigned int snapshot_additional_pages(struct zone *zone);
extern unsigned long snapshot_get_image_size(void);
extern int snapshot_read_next(struct snapshot_handle *handle);
extern int snapshot_write_next(struct snapshot_handle *handle);
int snapshot_write_finalize(struct snapshot_handle *handle);
extern int snapshot_image_loaded(struct snapshot_handle *handle);

extern bool hibernate_acquire(void);
extern void hibernate_release(void);

extern sector_t alloc_swapdev_block(int swap);
extern void free_all_swap_pages(int swap);
extern int swsusp_swap_in_use(void);

/*
 * Flags that can be passed from the hibernatig hernel to the "boot" kernel in
 * the image header.
 */
#define SF_COMPRESSION_ALG_LZO  0 /* dummy, details given  below */
#define SF_PLATFORM_MODE        1
#define SF_NOCOMPRESS_MODE      2
#define SF_CRC32_MODE           4
#define SF_HW_SIG               8

/*
 * Bit to indicate the compression algorithm to be used(for LZ4). The same
 * could be checked while saving/loading image to/from disk to use the
 * corresponding algorithms.
 *
 * By default, LZO compression is enabled if SF_CRC32_MODE is set. Use
 * SF_COMPRESSION_ALG_LZ4 to override this behaviour and use LZ4.
 *
 * SF_CRC32_MODE, SF_COMPRESSION_ALG_LZO(dummy) -> Compression, LZO
 * SF_CRC32_MODE, SF_COMPRESSION_ALG_LZ4 -> Compression, LZ4
 */
#define SF_COMPRESSION_ALG_LZ4  16

/* kernel/power/hibernate.c */
int swsusp_check(bool exclusive);
extern void swsusp_free(void);
extern int swsusp_read(unsigned int *flags_p);
extern int swsusp_write(unsigned int flags);
void swsusp_close(void);
#ifdef CONFIG_SUSPEND
extern int swsusp_unmark(void);
#else
static inline int swsusp_unmark(void) { return 0; }
#endif

struct __kernel_old_timeval;
/* kernel/power/swsusp.c */
extern void swsusp_show_speed(ktime_t, ktime_t, unsigned int, char *);

#ifdef CONFIG_SUSPEND
/* kernel/power/suspend.c */
extern const char * const pm_labels[];
extern const char *pm_states[];
extern const char *mem_sleep_states[];

extern int suspend_devices_and_enter(suspend_state_t state);
#else /* !CONFIG_SUSPEND */
#define mem_sleep_current       PM_SUSPEND_ON

static inline int suspend_devices_and_enter(suspend_state_t state)
{
        return -ENOSYS;
}
#endif /* !CONFIG_SUSPEND */

#ifdef CONFIG_PM_TEST_SUSPEND
/* kernel/power/suspend_test.c */
extern void suspend_test_start(void);
extern void suspend_test_finish(const char *label);
#else /* !CONFIG_PM_TEST_SUSPEND */
static inline void suspend_test_start(void) {}
static inline void suspend_test_finish(const char *label) {}
#endif /* !CONFIG_PM_TEST_SUSPEND */

#ifdef CONFIG_PM_SLEEP
/* kernel/power/main.c */
extern int pm_notifier_call_chain_robust(unsigned long val_up, unsigned long val_down);
extern int pm_notifier_call_chain(unsigned long val);
#endif

#ifdef CONFIG_HIGHMEM
int restore_highmem(void);
#else
static inline unsigned int count_highmem_pages(void) { return 0; }
static inline int restore_highmem(void) { return 0; }
#endif

/*
 * Suspend test levels
 */
enum {
        /* keep first */
        TEST_NONE,
        TEST_CORE,
        TEST_CPUS,
        TEST_PLATFORM,
        TEST_DEVICES,
        TEST_FREEZER,
        /* keep last */
        __TEST_AFTER_LAST
};

#define TEST_FIRST      TEST_NONE
#define TEST_MAX        (__TEST_AFTER_LAST - 1)

#ifdef CONFIG_PM_SLEEP_DEBUG
extern int pm_test_level;
#else
#define pm_test_level   (TEST_NONE)
#endif

#ifdef CONFIG_SUSPEND_FREEZER
static inline int suspend_freeze_processes(void)
{
        int error;

        error = freeze_processes();
        /*
         * freeze_processes() automatically thaws every task if freezing
         * fails. So we need not do anything extra upon error.
         */
        if (error)
                return error;

        error = freeze_kernel_threads();
        /*
         * freeze_kernel_threads() thaws only kernel threads upon freezing
         * failure. So we have to thaw the userspace tasks ourselves.
         */
        if (error)
                thaw_processes();

        return error;
}

static inline void suspend_thaw_processes(void)
{
        thaw_processes();
}
#else
static inline int suspend_freeze_processes(void)
{
        return 0;
}

static inline void suspend_thaw_processes(void)
{
}
#endif

#ifdef CONFIG_PM_AUTOSLEEP

/* kernel/power/autosleep.c */
extern int pm_autosleep_init(void);
extern int pm_autosleep_lock(void);
extern void pm_autosleep_unlock(void);
extern suspend_state_t pm_autosleep_state(void);
extern int pm_autosleep_set_state(suspend_state_t state);

#else /* !CONFIG_PM_AUTOSLEEP */

static inline int pm_autosleep_init(void) { return 0; }
static inline int pm_autosleep_lock(void) { return 0; }
static inline void pm_autosleep_unlock(void) {}
static inline suspend_state_t pm_autosleep_state(void) { return PM_SUSPEND_ON; }

#endif /* !CONFIG_PM_AUTOSLEEP */

#ifdef CONFIG_PM_WAKELOCKS

/* kernel/power/wakelock.c */
extern ssize_t pm_show_wakelocks(char *buf, bool show_active);
extern int pm_wake_lock(const char *buf);
extern int pm_wake_unlock(const char *buf);

#endif /* !CONFIG_PM_WAKELOCKS */

static inline int pm_sleep_disable_secondary_cpus(void)
{
        cpuidle_pause();
        return suspend_disable_secondary_cpus();
}

static inline void pm_sleep_enable_secondary_cpus(void)
{
        suspend_enable_secondary_cpus();
        cpuidle_resume();
}

void dpm_save_errno(int err);