/* * Copyright (C) 2014 Red Hat * Copyright (C) 2014 Intel Corp. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Authors: * Rob Clark <robdclark@gmail.com> * Daniel Vetter <daniel.vetter@ffwll.ch> */ #ifndef DRM_ATOMIC_H_ #define DRM_ATOMIC_H_ #include <drm/drm_crtc.h> #include <drm/drm_util.h> /** * struct drm_crtc_commit - track modeset commits on a CRTC * * This structure is used to track pending modeset changes and atomic commit on * a per-CRTC basis. Since updating the list should never block, this structure * is reference counted to allow waiters to safely wait on an event to complete, * without holding any locks. * * It has 3 different events in total to allow a fine-grained synchronization * between outstanding updates:: * * atomic commit thread hardware * * write new state into hardware ----> ... * signal hw_done * switch to new state on next * ... v/hblank * * wait for buffers to show up ... * * ... send completion irq * irq handler signals flip_done * cleanup old buffers * * signal cleanup_done * * wait for flip_done <---- * clean up atomic state * * The important bit to know is that &cleanup_done is the terminal event, but the * ordering between &flip_done and &hw_done is entirely up to the specific driver * and modeset state change. * * For an implementation of how to use this look at * drm_atomic_helper_setup_commit() from the atomic helper library. * * See also drm_crtc_commit_wait(). */ struct drm_crtc_commit { /** * @crtc: * * DRM CRTC for this commit. */ struct drm_crtc *crtc; /** * @ref: * * Reference count for this structure. Needed to allow blocking on * completions without the risk of the completion disappearing * meanwhile. */ struct kref ref; /** * @flip_done: * * Will be signaled when the hardware has flipped to the new set of * buffers. Signals at the same time as when the drm event for this * commit is sent to userspace, or when an out-fence is singalled. Note * that for most hardware, in most cases this happens after @hw_done is * signalled. * * Completion of this stage is signalled implicitly by calling * drm_crtc_send_vblank_event() on &drm_crtc_state.event. */ struct completion flip_done; /** * @hw_done: * * Will be signalled when all hw register changes for this commit have * been written out. Especially when disabling a pipe this can be much * later than @flip_done, since that can signal already when the * screen goes black, whereas to fully shut down a pipe more register * I/O is required. * * Note that this does not need to include separately reference-counted * resources like backing storage buffer pinning, or runtime pm * management. * * Drivers should call drm_atomic_helper_commit_hw_done() to signal * completion of this stage. */ struct completion hw_done; /** * @cleanup_done: * * Will be signalled after old buffers have been cleaned up by calling * drm_atomic_helper_cleanup_planes(). Since this can only happen after * a vblank wait completed it might be a bit later. This completion is * useful to throttle updates and avoid hardware updates getting ahead * of the buffer cleanup too much. * * Drivers should call drm_atomic_helper_commit_cleanup_done() to signal * completion of this stage. */ struct completion cleanup_done; /** * @commit_entry: * * Entry on the per-CRTC &drm_crtc.commit_list. Protected by * $drm_crtc.commit_lock. */ struct list_head commit_entry; /** * @event: * * &drm_pending_vblank_event pointer to clean up private events. */ struct drm_pending_vblank_event *event; /** * @abort_completion: * * A flag that's set after drm_atomic_helper_setup_commit() takes a * second reference for the completion of $drm_crtc_state.event. It's * used by the free code to remove the second reference if commit fails. */ bool abort_completion; }; struct __drm_colorops_state { struct drm_colorop *ptr; struct drm_colorop_state *state, *old_state, *new_state; }; struct __drm_planes_state { struct drm_plane *ptr; /** * @state_to_destroy: * * Used to track the @drm_plane_state we will need to free when * tearing down the associated &drm_atomic_state in * $drm_mode_config_funcs.atomic_state_clear or * drm_atomic_state_default_clear(). * * Before a commit, and the call to * drm_atomic_helper_swap_state() in particular, it points to * the same state than @new_state. After a commit, it points to * the same state than @old_state. */ struct drm_plane_state *state_to_destroy; struct drm_plane_state *old_state, *new_state; }; struct __drm_crtcs_state { struct drm_crtc *ptr; /** * @state_to_destroy: * * Used to track the @drm_crtc_state we will need to free when * tearing down the associated &drm_atomic_state in * $drm_mode_config_funcs.atomic_state_clear or * drm_atomic_state_default_clear(). * * Before a commit, and the call to * drm_atomic_helper_swap_state() in particular, it points to * the same state than @new_state. After a commit, it points to * the same state than @old_state. */ struct drm_crtc_state *state_to_destroy; struct drm_crtc_state *old_state, *new_state; /** * @commit: * * A reference to the CRTC commit object that is kept for use by * drm_atomic_helper_wait_for_flip_done() after * drm_atomic_helper_commit_hw_done() is called. This ensures that a * concurrent commit won't free a commit object that is still in use. */ struct drm_crtc_commit *commit; s32 __user *out_fence_ptr; u64 last_vblank_count; }; struct __drm_connnectors_state { struct drm_connector *ptr; /** * @state_to_destroy: * * Used to track the @drm_connector_state we will need to free * when tearing down the associated &drm_atomic_state in * $drm_mode_config_funcs.atomic_state_clear or * drm_atomic_state_default_clear(). * * Before a commit, and the call to * drm_atomic_helper_swap_state() in particular, it points to * the same state than @new_state. After a commit, it points to * the same state than @old_state. */ struct drm_connector_state *state_to_destroy; struct drm_connector_state *old_state, *new_state; /** * @out_fence_ptr: * * User-provided pointer which the kernel uses to return a sync_file * file descriptor. Used by writeback connectors to signal completion of * the writeback. */ s32 __user *out_fence_ptr; }; struct drm_private_obj; struct drm_private_state; /** * struct drm_private_state_funcs - atomic state functions for private objects * * These hooks are used by atomic helpers to create, swap and destroy states of * private objects. The structure itself is used as a vtable to identify the * associated private object type. Each private object type that needs to be * added to the atomic states is expected to have an implementation of these * hooks and pass a pointer to its drm_private_state_funcs struct to * drm_atomic_get_private_obj_state(). */ struct drm_private_state_funcs { /** * @atomic_duplicate_state: * * Duplicate the current state of the private object and return it. It * is an error to call this before obj->state has been initialized. * * RETURNS: * * Duplicated atomic state or NULL when obj->state is not * initialized or allocation failed. */ struct drm_private_state *(*atomic_duplicate_state)(struct drm_private_obj *obj); /** * @atomic_destroy_state: * * Frees the private object state created with @atomic_duplicate_state. */ void (*atomic_destroy_state)(struct drm_private_obj *obj, struct drm_private_state *state); /** * @atomic_print_state: * * If driver subclasses &struct drm_private_state, it should implement * this optional hook for printing additional driver specific state. * * Do not call this directly, use drm_atomic_private_obj_print_state() * instead. */ void (*atomic_print_state)(struct drm_printer *p, const struct drm_private_state *state); }; /** * struct drm_private_obj - base struct for driver private atomic object * * A driver private object is initialized by calling * drm_atomic_private_obj_init() and cleaned up by calling * drm_atomic_private_obj_fini(). * * Currently only tracks the state update functions and the opaque driver * private state itself, but in the future might also track which * &drm_modeset_lock is required to duplicate and update this object's state. * * All private objects must be initialized before the DRM device they are * attached to is registered to the DRM subsystem (call to drm_dev_register()) * and should stay around until this DRM device is unregistered (call to * drm_dev_unregister()). In other words, private objects lifetime is tied * to the DRM device lifetime. This implies that: * * 1/ all calls to drm_atomic_private_obj_init() must be done before calling * drm_dev_register() * 2/ all calls to drm_atomic_private_obj_fini() must be done after calling * drm_dev_unregister() * * If that private object is used to store a state shared by multiple * CRTCs, proper care must be taken to ensure that non-blocking commits are * properly ordered to avoid a use-after-free issue. * * Indeed, assuming a sequence of two non-blocking &drm_atomic_commit on two * different &drm_crtc using different &drm_plane and &drm_connector, so with no * resources shared, there's no guarantee on which commit is going to happen * first. However, the second &drm_atomic_commit will consider the first * &drm_private_obj its old state, and will be in charge of freeing it whenever * the second &drm_atomic_commit is done. * * If the first &drm_atomic_commit happens after it, it will consider its * &drm_private_obj the new state and will be likely to access it, resulting in * an access to a freed memory region. Drivers should store (and get a reference * to) the &drm_crtc_commit structure in our private state in * &drm_mode_config_helper_funcs.atomic_commit_setup, and then wait for that * commit to complete as the first step of * &drm_mode_config_helper_funcs.atomic_commit_tail, similar to * drm_atomic_helper_wait_for_dependencies(). */ struct drm_private_obj { /** * @dev: parent DRM device */ struct drm_device *dev; /** * @head: List entry used to attach a private object to a &drm_device * (queued to &drm_mode_config.privobj_list). */ struct list_head head; /** * @lock: Modeset lock to protect the state object. */ struct drm_modeset_lock lock; /** * @state: Current atomic state for this driver private object. */ struct drm_private_state *state; /** * @funcs: * * Functions to manipulate the state of this driver private object, see * &drm_private_state_funcs. */ const struct drm_private_state_funcs *funcs; }; /** * drm_for_each_privobj() - private object iterator * * @privobj: pointer to the current private object. Updated after each * iteration * @dev: the DRM device we want get private objects from * * Allows one to iterate over all private objects attached to @dev */ #define drm_for_each_privobj(privobj, dev) \ list_for_each_entry(privobj, &(dev)->mode_config.privobj_list, head) /** * struct drm_private_state - base struct for driver private object state * * Currently only contains a backpointer to the overall atomic update, * and the relevant private object but in the future also might hold * synchronization information similar to e.g. &drm_crtc.commit. */ struct drm_private_state { /** * @state: backpointer to global drm_atomic_state */ struct drm_atomic_state *state; /** * @obj: backpointer to the private object */ struct drm_private_obj *obj; }; struct __drm_private_objs_state { struct drm_private_obj *ptr; /** * @state_to_destroy: * * Used to track the @drm_private_state we will need to free * when tearing down the associated &drm_atomic_state in * $drm_mode_config_funcs.atomic_state_clear or * drm_atomic_state_default_clear(). * * Before a commit, and the call to * drm_atomic_helper_swap_state() in particular, it points to * the same state than @new_state. After a commit, it points to * the same state than @old_state. */ struct drm_private_state *state_to_destroy; struct drm_private_state *old_state, *new_state; }; /** * struct drm_atomic_state - Atomic commit structure * * This structure is the kernel counterpart of @drm_mode_atomic and represents * an atomic commit that transitions from an old to a new display state. It * contains all the objects affected by the atomic commit and both the new * state structures and pointers to the old state structures for * these. * * States are added to an atomic update by calling drm_atomic_get_crtc_state(), * drm_atomic_get_plane_state(), drm_atomic_get_connector_state(), or for * private state structures, drm_atomic_get_private_obj_state(). * * NOTE: struct drm_atomic_state first started as a single collection of * entities state pointers (drm_plane_state, drm_crtc_state, etc.). * * At atomic_check time, you could get the state about to be committed * from drm_atomic_state, and the one currently running from the * entities state pointer (drm_crtc.state, for example). After the call * to drm_atomic_helper_swap_state(), the entities state pointer would * contain the state previously checked, and the drm_atomic_state * structure the old state. * * Over time, and in order to avoid confusion, drm_atomic_state has * grown to have both the old state (ie, the state we replace) and the * new state (ie, the state we want to apply). Those names are stable * during the commit process, which makes it easier to reason about. * * You can still find some traces of that evolution through some hooks * or callbacks taking a drm_atomic_state parameter called names like * "old_state". This doesn't necessarily mean that the previous * drm_atomic_state is passed, but rather that this used to be the state * collection we were replacing after drm_atomic_helper_swap_state(), * but the variable name was never updated. * * Some atomic operations implementations followed a similar process. We * first started to pass the entity state only. However, it was pretty * cumbersome for drivers, and especially CRTCs, to retrieve the states * of other components. Thus, we switched to passing the whole * drm_atomic_state as a parameter to those operations. Similarly, the * transition isn't complete yet, and one might still find atomic * operations taking a drm_atomic_state pointer, or a component state * pointer. The former is the preferred form. */ struct drm_atomic_state { /** * @ref: * * Count of all references to this update (will not be freed until zero). */ struct kref ref; /** * @dev: Parent DRM Device. */ struct drm_device *dev; /** * @allow_modeset: * * Allow full modeset. This is used by the ATOMIC IOCTL handler to * implement the DRM_MODE_ATOMIC_ALLOW_MODESET flag. Drivers should * generally not consult this flag, but instead look at the output of * drm_atomic_crtc_needs_modeset(). The detailed rules are: * * - Drivers must not consult @allow_modeset in the atomic commit path. * Use drm_atomic_crtc_needs_modeset() instead. * * - Drivers must consult @allow_modeset before adding unrelated struct * drm_crtc_state to this commit by calling * drm_atomic_get_crtc_state(). See also the warning in the * documentation for that function. * * - Drivers must never change this flag, it is under the exclusive * control of userspace. * * - Drivers may consult @allow_modeset in the atomic check path, if * they have the choice between an optimal hardware configuration * which requires a modeset, and a less optimal configuration which * can be committed without a modeset. An example would be suboptimal * scanout FIFO allocation resulting in increased idle power * consumption. This allows userspace to avoid flickering and delays * for the normal composition loop at reasonable cost. */ bool allow_modeset : 1; /** * @legacy_cursor_update: * * Hint to enforce legacy cursor IOCTL semantics. * * WARNING: This is thoroughly broken and pretty much impossible to * implement correctly. Drivers must ignore this and should instead * implement &drm_plane_helper_funcs.atomic_async_check and * &drm_plane_helper_funcs.atomic_async_commit hooks. New users of this * flag are not allowed. */ bool legacy_cursor_update : 1; /** * @async_update: hint for asynchronous plane update */ bool async_update : 1; /** * @duplicated: * * Indicates whether or not this atomic state was duplicated using * drm_atomic_helper_duplicate_state(). Drivers and atomic helpers * should use this to fixup normal inconsistencies in duplicated * states. */ bool duplicated : 1; /** * @checked: * * Indicates the state has been checked and thus must no longer * be mutated. For internal use only, do not consult from drivers. */ bool checked : 1; /** * @plane_color_pipeline: * * Indicates whether this atomic state originated with a client that * set the DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE. * * Drivers and helper functions should use this to ignore legacy * properties that are incompatible with the drm_plane COLOR_PIPELINE * behavior, such as: * * - COLOR_RANGE * - COLOR_ENCODING * * or any other driver-specific properties that might affect pixel * values. */ bool plane_color_pipeline : 1; /** * @colorops: * * Pointer to array of @drm_colorop and @drm_colorop_state part of this * update. */ struct __drm_colorops_state *colorops; /** * @planes: * * Pointer to array of @drm_plane and @drm_plane_state part of this * update. */ struct __drm_planes_state *planes; /** * @crtcs: * * Pointer to array of @drm_crtc and @drm_crtc_state part of this * update. */ struct __drm_crtcs_state *crtcs; /** * @num_connector: size of the @connectors array */ int num_connector; /** * @connectors: * * Pointer to array of @drm_connector and @drm_connector_state part of * this update. */ struct __drm_connnectors_state *connectors; /** * @num_private_objs: size of the @private_objs array */ int num_private_objs; /** * @private_objs: * * Pointer to array of @drm_private_obj and @drm_private_obj_state part * of this update. */ struct __drm_private_objs_state *private_objs; /** * @acquire_ctx: acquire context for this atomic modeset state update */ struct drm_modeset_acquire_ctx *acquire_ctx; /** * @fake_commit: * * Used for signaling unbound planes/connectors. * When a connector or plane is not bound to any CRTC, it's still important * to preserve linearity to prevent the atomic states from being freed too early. * * This commit (if set) is not bound to any CRTC, but will be completed when * drm_atomic_helper_commit_hw_done() is called. */ struct drm_crtc_commit *fake_commit; /** * @commit_work: * * Work item which can be used by the driver or helpers to execute the * commit without blocking. */ struct work_struct commit_work; }; void __drm_crtc_commit_free(struct kref *kref); /** * drm_crtc_commit_get - acquire a reference to the CRTC commit * @commit: CRTC commit * * Increases the reference of @commit. * * Returns: * The pointer to @commit, with reference increased. */ static inline struct drm_crtc_commit *drm_crtc_commit_get(struct drm_crtc_commit *commit) { kref_get(&commit->ref); return commit; } /** * drm_crtc_commit_put - release a reference to the CRTC commmit * @commit: CRTC commit * * This releases a reference to @commit which is freed after removing the * final reference. No locking required and callable from any context. */ static inline void drm_crtc_commit_put(struct drm_crtc_commit *commit) { kref_put(&commit->ref, __drm_crtc_commit_free); } int drm_crtc_commit_wait(struct drm_crtc_commit *commit); struct drm_atomic_state * __must_check drm_atomic_state_alloc(struct drm_device *dev); void drm_atomic_state_clear(struct drm_atomic_state *state); /** * drm_atomic_state_get - acquire a reference to the atomic state * @state: The atomic state * * Returns a new reference to the @state */ static inline struct drm_atomic_state * drm_atomic_state_get(struct drm_atomic_state *state) { kref_get(&state->ref); return state; } void __drm_atomic_state_free(struct kref *ref); /** * drm_atomic_state_put - release a reference to the atomic state * @state: The atomic state * * This releases a reference to @state which is freed after removing the * final reference. No locking required and callable from any context. */ static inline void drm_atomic_state_put(struct drm_atomic_state *state) { kref_put(&state->ref, __drm_atomic_state_free); } int __must_check drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state); void drm_atomic_state_default_clear(struct drm_atomic_state *state); void drm_atomic_state_default_release(struct drm_atomic_state *state); struct drm_crtc_state * __must_check drm_atomic_get_crtc_state(struct drm_atomic_state *state, struct drm_crtc *crtc); struct drm_plane_state * __must_check drm_atomic_get_plane_state(struct drm_atomic_state *state, struct drm_plane *plane); struct drm_colorop_state * drm_atomic_get_colorop_state(struct drm_atomic_state *state, struct drm_colorop *colorop); struct drm_colorop_state * drm_atomic_get_old_colorop_state(struct drm_atomic_state *state, struct drm_colorop *colorop); struct drm_colorop_state * drm_atomic_get_new_colorop_state(struct drm_atomic_state *state, struct drm_colorop *colorop); struct drm_connector_state * __must_check drm_atomic_get_connector_state(struct drm_atomic_state *state, struct drm_connector *connector); void drm_atomic_private_obj_init(struct drm_device *dev, struct drm_private_obj *obj, struct drm_private_state *state, const struct drm_private_state_funcs *funcs); void drm_atomic_private_obj_fini(struct drm_private_obj *obj); struct drm_private_state * __must_check drm_atomic_get_private_obj_state(struct drm_atomic_state *state, struct drm_private_obj *obj); struct drm_private_state * drm_atomic_get_old_private_obj_state(const struct drm_atomic_state *state, struct drm_private_obj *obj); struct drm_private_state * drm_atomic_get_new_private_obj_state(const struct drm_atomic_state *state, struct drm_private_obj *obj); struct drm_connector * drm_atomic_get_old_connector_for_encoder(const struct drm_atomic_state *state, struct drm_encoder *encoder); struct drm_connector * drm_atomic_get_new_connector_for_encoder(const struct drm_atomic_state *state, struct drm_encoder *encoder); struct drm_connector * drm_atomic_get_connector_for_encoder(const struct drm_encoder *encoder, struct drm_modeset_acquire_ctx *ctx); struct drm_crtc * drm_atomic_get_old_crtc_for_encoder(struct drm_atomic_state *state, struct drm_encoder *encoder); struct drm_crtc * drm_atomic_get_new_crtc_for_encoder(struct drm_atomic_state *state, struct drm_encoder *encoder); /** * drm_atomic_get_old_crtc_state - get old CRTC state, if it exists * @state: global atomic state object * @crtc: CRTC to grab * * This function returns the old CRTC state for the given CRTC, or * NULL if the CRTC is not part of the global atomic state. */ static inline struct drm_crtc_state * drm_atomic_get_old_crtc_state(const struct drm_atomic_state *state, struct drm_crtc *crtc) { return state->crtcs[drm_crtc_index(crtc)].old_state; } /** * drm_atomic_get_new_crtc_state - get new CRTC state, if it exists * @state: global atomic state object * @crtc: CRTC to grab * * This function returns the new CRTC state for the given CRTC, or * NULL if the CRTC is not part of the global atomic state. */ static inline struct drm_crtc_state * drm_atomic_get_new_crtc_state(const struct drm_atomic_state *state, struct drm_crtc *crtc) { return state->crtcs[drm_crtc_index(crtc)].new_state; } /** * drm_atomic_get_old_plane_state - get plane state, if it exists * @state: global atomic state object * @plane: plane to grab * * This function returns the old plane state for the given plane, or * NULL if the plane is not part of the global atomic state. */ static inline struct drm_plane_state * drm_atomic_get_old_plane_state(const struct drm_atomic_state *state, struct drm_plane *plane) { return state->planes[drm_plane_index(plane)].old_state; } /** * drm_atomic_get_new_plane_state - get plane state, if it exists * @state: global atomic state object * @plane: plane to grab * * This function returns the new plane state for the given plane, or * NULL if the plane is not part of the global atomic state. */ static inline struct drm_plane_state * drm_atomic_get_new_plane_state(const struct drm_atomic_state *state, struct drm_plane *plane) { return state->planes[drm_plane_index(plane)].new_state; } /** * drm_atomic_get_old_connector_state - get connector state, if it exists * @state: global atomic state object * @connector: connector to grab * * This function returns the old connector state for the given connector, * or NULL if the connector is not part of the global atomic state. */ static inline struct drm_connector_state * drm_atomic_get_old_connector_state(const struct drm_atomic_state *state, struct drm_connector *connector) { int index = drm_connector_index(connector); if (index >= state->num_connector) return NULL; return state->connectors[index].old_state; } /** * drm_atomic_get_new_connector_state - get connector state, if it exists * @state: global atomic state object * @connector: connector to grab * * This function returns the new connector state for the given connector, * or NULL if the connector is not part of the global atomic state. */ static inline struct drm_connector_state * drm_atomic_get_new_connector_state(const struct drm_atomic_state *state, struct drm_connector *connector) { int index = drm_connector_index(connector); if (index >= state->num_connector) return NULL; return state->connectors[index].new_state; } /** * __drm_atomic_get_current_plane_state - get current plane state * @state: global atomic state object * @plane: plane to grab * * This function returns the plane state for the given plane, either the * new plane state from @state, or if the plane isn't part of the atomic * state update, from @plane. This is useful in atomic check callbacks, * when drivers need to peek at, but not change, state of other planes, * since it avoids threading an error code back up the call chain. * * WARNING: * * Note that this function is in general unsafe since it doesn't check for the * required locking for access state structures. Drivers must ensure that it is * safe to access the returned state structure through other means. One common * example is when planes are fixed to a single CRTC, and the driver knows that * the CRTC lock is held already. In that case holding the CRTC lock gives a * read-lock on all planes connected to that CRTC. But if planes can be * reassigned things get more tricky. In that case it's better to use * drm_atomic_get_plane_state and wire up full error handling. * * Returns: * * Read-only pointer to the current plane state. */ static inline const struct drm_plane_state * __drm_atomic_get_current_plane_state(const struct drm_atomic_state *state, struct drm_plane *plane) { struct drm_plane_state *plane_state; plane_state = drm_atomic_get_new_plane_state(state, plane); if (plane_state) return plane_state; /* * If the plane isn't part of the state, fallback to the currently active one. */ return plane->state; } int __must_check drm_atomic_add_encoder_bridges(struct drm_atomic_state *state, struct drm_encoder *encoder); int __must_check drm_atomic_add_affected_connectors(struct drm_atomic_state *state, struct drm_crtc *crtc); int __must_check drm_atomic_add_affected_planes(struct drm_atomic_state *state, struct drm_crtc *crtc); int __must_check drm_atomic_add_affected_colorops(struct drm_atomic_state *state, struct drm_plane *plane); int __must_check drm_atomic_check_only(struct drm_atomic_state *state); int __must_check drm_atomic_commit(struct drm_atomic_state *state); int __must_check drm_atomic_nonblocking_commit(struct drm_atomic_state *state); void drm_state_dump(struct drm_device *dev, struct drm_printer *p); /** * for_each_oldnew_connector_in_state - iterate over all connectors in an atomic update * @__state: &struct drm_atomic_state pointer * @connector: &struct drm_connector iteration cursor * @old_connector_state: &struct drm_connector_state iteration cursor for the * old state * @new_connector_state: &struct drm_connector_state iteration cursor for the * new state * @__i: int iteration cursor, for macro-internal use * * This iterates over all connectors in an atomic update, tracking both old and * new state. This is useful in places where the state delta needs to be * considered, for example in atomic check functions. */ #define for_each_oldnew_connector_in_state(__state, connector, old_connector_state, new_connector_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->num_connector; \ (__i)++) \ for_each_if ((__state)->connectors[__i].ptr && \ ((connector) = (__state)->connectors[__i].ptr, \ (void)(connector) /* Only to avoid unused-but-set-variable warning */, \ (old_connector_state) = (__state)->connectors[__i].old_state, \ (new_connector_state) = (__state)->connectors[__i].new_state, 1)) /** * for_each_old_connector_in_state - iterate over all connectors in an atomic update * @__state: &struct drm_atomic_state pointer * @connector: &struct drm_connector iteration cursor * @old_connector_state: &struct drm_connector_state iteration cursor for the * old state * @__i: int iteration cursor, for macro-internal use * * This iterates over all connectors in an atomic update, tracking only the old * state. This is useful in disable functions, where we need the old state the * hardware is still in. */ #define for_each_old_connector_in_state(__state, connector, old_connector_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->num_connector; \ (__i)++) \ for_each_if ((__state)->connectors[__i].ptr && \ ((connector) = (__state)->connectors[__i].ptr, \ (void)(connector) /* Only to avoid unused-but-set-variable warning */, \ (old_connector_state) = (__state)->connectors[__i].old_state, 1)) /** * for_each_new_connector_in_state - iterate over all connectors in an atomic update * @__state: &struct drm_atomic_state pointer * @connector: &struct drm_connector iteration cursor * @new_connector_state: &struct drm_connector_state iteration cursor for the * new state * @__i: int iteration cursor, for macro-internal use * * This iterates over all connectors in an atomic update, tracking only the new * state. This is useful in enable functions, where we need the new state the * hardware should be in when the atomic commit operation has completed. */ #define for_each_new_connector_in_state(__state, connector, new_connector_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->num_connector; \ (__i)++) \ for_each_if ((__state)->connectors[__i].ptr && \ ((connector) = (__state)->connectors[__i].ptr, \ (void)(connector) /* Only to avoid unused-but-set-variable warning */, \ (new_connector_state) = (__state)->connectors[__i].new_state, \ (void)(new_connector_state) /* Only to avoid unused-but-set-variable warning */, 1)) /** * for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic update * @__state: &struct drm_atomic_state pointer * @crtc: &struct drm_crtc iteration cursor * @old_crtc_state: &struct drm_crtc_state iteration cursor for the old state * @new_crtc_state: &struct drm_crtc_state iteration cursor for the new state * @__i: int iteration cursor, for macro-internal use * * This iterates over all CRTCs in an atomic update, tracking both old and * new state. This is useful in places where the state delta needs to be * considered, for example in atomic check functions. */ #define for_each_oldnew_crtc_in_state(__state, crtc, old_crtc_state, new_crtc_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ for_each_if ((__state)->crtcs[__i].ptr && \ ((crtc) = (__state)->crtcs[__i].ptr, \ (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \ (old_crtc_state) = (__state)->crtcs[__i].old_state, \ (void)(old_crtc_state) /* Only to avoid unused-but-set-variable warning */, \ (new_crtc_state) = (__state)->crtcs[__i].new_state, \ (void)(new_crtc_state) /* Only to avoid unused-but-set-variable warning */, 1)) /** * for_each_old_crtc_in_state - iterate over all CRTCs in an atomic update * @__state: &struct drm_atomic_state pointer * @crtc: &struct drm_crtc iteration cursor * @old_crtc_state: &struct drm_crtc_state iteration cursor for the old state * @__i: int iteration cursor, for macro-internal use * * This iterates over all CRTCs in an atomic update, tracking only the old * state. This is useful in disable functions, where we need the old state the * hardware is still in. */ #define for_each_old_crtc_in_state(__state, crtc, old_crtc_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ for_each_if ((__state)->crtcs[__i].ptr && \ ((crtc) = (__state)->crtcs[__i].ptr, \ (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \ (old_crtc_state) = (__state)->crtcs[__i].old_state, 1)) /** * for_each_new_crtc_in_state - iterate over all CRTCs in an atomic update * @__state: &struct drm_atomic_state pointer * @crtc: &struct drm_crtc iteration cursor * @new_crtc_state: &struct drm_crtc_state iteration cursor for the new state * @__i: int iteration cursor, for macro-internal use * * This iterates over all CRTCs in an atomic update, tracking only the new * state. This is useful in enable functions, where we need the new state the * hardware should be in when the atomic commit operation has completed. */ #define for_each_new_crtc_in_state(__state, crtc, new_crtc_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_crtc; \ (__i)++) \ for_each_if ((__state)->crtcs[__i].ptr && \ ((crtc) = (__state)->crtcs[__i].ptr, \ (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \ (new_crtc_state) = (__state)->crtcs[__i].new_state, \ (void)(new_crtc_state) /* Only to avoid unused-but-set-variable warning */, 1)) /** * for_each_oldnew_colorop_in_state - iterate over all colorops in an atomic update * @__state: &struct drm_atomic_state pointer * @colorop: &struct drm_colorop iteration cursor * @old_colorop_state: &struct drm_colorop_state iteration cursor for the old state * @new_colorop_state: &struct drm_colorop_state iteration cursor for the new state * @__i: int iteration cursor, for macro-internal use * * This iterates over all colorops in an atomic update, tracking both old and * new state. This is useful in places where the state delta needs to be * considered, for example in atomic check functions. */ #define for_each_oldnew_colorop_in_state(__state, colorop, old_colorop_state, \ new_colorop_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_colorop; \ (__i)++) \ for_each_if ((__state)->colorops[__i].ptr && \ ((colorop) = (__state)->colorops[__i].ptr, \ (void)(colorop) /* Only to avoid unused-but-set-variable warning */, \ (old_colorop_state) = (__state)->colorops[__i].old_state,\ (new_colorop_state) = (__state)->colorops[__i].new_state, 1)) /** * for_each_new_colorop_in_state - iterate over all colorops in an atomic update * @__state: &struct drm_atomic_state pointer * @colorop: &struct drm_colorop iteration cursor * @new_colorop_state: &struct drm_colorop_state iteration cursor for the new state * @__i: int iteration cursor, for macro-internal use * * This iterates over all colorops in an atomic update, tracking new state. This is * useful in places where the state delta needs to be considered, for example in * atomic check functions. */ #define for_each_new_colorop_in_state(__state, colorop, new_colorop_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_colorop; \ (__i)++) \ for_each_if ((__state)->colorops[__i].ptr && \ ((colorop) = (__state)->colorops[__i].ptr, \ (void)(colorop) /* Only to avoid unused-but-set-variable warning */, \ (new_colorop_state) = (__state)->colorops[__i].new_state, 1)) /** * for_each_oldnew_plane_in_state - iterate over all planes in an atomic update * @__state: &struct drm_atomic_state pointer * @plane: &struct drm_plane iteration cursor * @old_plane_state: &struct drm_plane_state iteration cursor for the old state * @new_plane_state: &struct drm_plane_state iteration cursor for the new state * @__i: int iteration cursor, for macro-internal use * * This iterates over all planes in an atomic update, tracking both old and * new state. This is useful in places where the state delta needs to be * considered, for example in atomic check functions. */ #define for_each_oldnew_plane_in_state(__state, plane, old_plane_state, new_plane_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ for_each_if ((__state)->planes[__i].ptr && \ ((plane) = (__state)->planes[__i].ptr, \ (void)(plane) /* Only to avoid unused-but-set-variable warning */, \ (old_plane_state) = (__state)->planes[__i].old_state,\ (new_plane_state) = (__state)->planes[__i].new_state, 1)) /** * for_each_oldnew_plane_in_state_reverse - iterate over all planes in an atomic * update in reverse order * @__state: &struct drm_atomic_state pointer * @plane: &struct drm_plane iteration cursor * @old_plane_state: &struct drm_plane_state iteration cursor for the old state * @new_plane_state: &struct drm_plane_state iteration cursor for the new state * @__i: int iteration cursor, for macro-internal use * * This iterates over all planes in an atomic update in reverse order, * tracking both old and new state. This is useful in places where the * state delta needs to be considered, for example in atomic check functions. */ #define for_each_oldnew_plane_in_state_reverse(__state, plane, old_plane_state, new_plane_state, __i) \ for ((__i) = ((__state)->dev->mode_config.num_total_plane - 1); \ (__i) >= 0; \ (__i)--) \ for_each_if ((__state)->planes[__i].ptr && \ ((plane) = (__state)->planes[__i].ptr, \ (old_plane_state) = (__state)->planes[__i].old_state,\ (new_plane_state) = (__state)->planes[__i].new_state, 1)) /** * for_each_new_plane_in_state_reverse - other than only tracking new state, * it's the same as for_each_oldnew_plane_in_state_reverse * @__state: &struct drm_atomic_state pointer * @plane: &struct drm_plane iteration cursor * @new_plane_state: &struct drm_plane_state iteration cursor for the new state * @__i: int iteration cursor, for macro-internal use */ #define for_each_new_plane_in_state_reverse(__state, plane, new_plane_state, __i) \ for ((__i) = ((__state)->dev->mode_config.num_total_plane - 1); \ (__i) >= 0; \ (__i)--) \ for_each_if ((__state)->planes[__i].ptr && \ ((plane) = (__state)->planes[__i].ptr, \ (new_plane_state) = (__state)->planes[__i].new_state, 1)) /** * for_each_old_plane_in_state - iterate over all planes in an atomic update * @__state: &struct drm_atomic_state pointer * @plane: &struct drm_plane iteration cursor * @old_plane_state: &struct drm_plane_state iteration cursor for the old state * @__i: int iteration cursor, for macro-internal use * * This iterates over all planes in an atomic update, tracking only the old * state. This is useful in disable functions, where we need the old state the * hardware is still in. */ #define for_each_old_plane_in_state(__state, plane, old_plane_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ for_each_if ((__state)->planes[__i].ptr && \ ((plane) = (__state)->planes[__i].ptr, \ (old_plane_state) = (__state)->planes[__i].old_state, 1)) /** * for_each_new_plane_in_state - iterate over all planes in an atomic update * @__state: &struct drm_atomic_state pointer * @plane: &struct drm_plane iteration cursor * @new_plane_state: &struct drm_plane_state iteration cursor for the new state * @__i: int iteration cursor, for macro-internal use * * This iterates over all planes in an atomic update, tracking only the new * state. This is useful in enable functions, where we need the new state the * hardware should be in when the atomic commit operation has completed. */ #define for_each_new_plane_in_state(__state, plane, new_plane_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->dev->mode_config.num_total_plane; \ (__i)++) \ for_each_if ((__state)->planes[__i].ptr && \ ((plane) = (__state)->planes[__i].ptr, \ (void)(plane) /* Only to avoid unused-but-set-variable warning */, \ (new_plane_state) = (__state)->planes[__i].new_state, \ (void)(new_plane_state) /* Only to avoid unused-but-set-variable warning */, 1)) /** * for_each_oldnew_private_obj_in_state - iterate over all private objects in an atomic update * @__state: &struct drm_atomic_state pointer * @obj: &struct drm_private_obj iteration cursor * @old_obj_state: &struct drm_private_state iteration cursor for the old state * @new_obj_state: &struct drm_private_state iteration cursor for the new state * @__i: int iteration cursor, for macro-internal use * * This iterates over all private objects in an atomic update, tracking both * old and new state. This is useful in places where the state delta needs * to be considered, for example in atomic check functions. */ #define for_each_oldnew_private_obj_in_state(__state, obj, old_obj_state, new_obj_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->num_private_objs && \ ((obj) = (__state)->private_objs[__i].ptr, \ (old_obj_state) = (__state)->private_objs[__i].old_state, \ (new_obj_state) = (__state)->private_objs[__i].new_state, 1); \ (__i)++) /** * for_each_old_private_obj_in_state - iterate over all private objects in an atomic update * @__state: &struct drm_atomic_state pointer * @obj: &struct drm_private_obj iteration cursor * @old_obj_state: &struct drm_private_state iteration cursor for the old state * @__i: int iteration cursor, for macro-internal use * * This iterates over all private objects in an atomic update, tracking only * the old state. This is useful in disable functions, where we need the old * state the hardware is still in. */ #define for_each_old_private_obj_in_state(__state, obj, old_obj_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->num_private_objs && \ ((obj) = (__state)->private_objs[__i].ptr, \ (old_obj_state) = (__state)->private_objs[__i].old_state, 1); \ (__i)++) /** * for_each_new_private_obj_in_state - iterate over all private objects in an atomic update * @__state: &struct drm_atomic_state pointer * @obj: &struct drm_private_obj iteration cursor * @new_obj_state: &struct drm_private_state iteration cursor for the new state * @__i: int iteration cursor, for macro-internal use * * This iterates over all private objects in an atomic update, tracking only * the new state. This is useful in enable functions, where we need the new state the * hardware should be in when the atomic commit operation has completed. */ #define for_each_new_private_obj_in_state(__state, obj, new_obj_state, __i) \ for ((__i) = 0; \ (__i) < (__state)->num_private_objs && \ ((obj) = (__state)->private_objs[__i].ptr, \ (void)(obj) /* Only to avoid unused-but-set-variable warning */, \ (new_obj_state) = (__state)->private_objs[__i].new_state, 1); \ (__i)++) /** * drm_atomic_crtc_needs_modeset - compute combined modeset need * @state: &drm_crtc_state for the CRTC * * To give drivers flexibility &struct drm_crtc_state has 3 booleans to track * whether the state CRTC changed enough to need a full modeset cycle: * mode_changed, active_changed and connectors_changed. This helper simply * combines these three to compute the overall need for a modeset for @state. * * The atomic helper code sets these booleans, but drivers can and should * change them appropriately to accurately represent whether a modeset is * really needed. In general, drivers should avoid full modesets whenever * possible. * * For example if the CRTC mode has changed, and the hardware is able to enact * the requested mode change without going through a full modeset, the driver * should clear mode_changed in its &drm_mode_config_funcs.atomic_check * implementation. */ static inline bool drm_atomic_crtc_needs_modeset(const struct drm_crtc_state *state) { return state->mode_changed || state->active_changed || state->connectors_changed; } /** * drm_atomic_crtc_effectively_active - compute whether CRTC is actually active * @state: &drm_crtc_state for the CRTC * * When in self refresh mode, the crtc_state->active value will be false, since * the CRTC is off. However in some cases we're interested in whether the CRTC * is active, or effectively active (ie: it's connected to an active display). * In these cases, use this function instead of just checking active. */ static inline bool drm_atomic_crtc_effectively_active(const struct drm_crtc_state *state) { return state->active || state->self_refresh_active; } /** * struct drm_bus_cfg - bus configuration * * This structure stores the configuration of a physical bus between two * components in an output pipeline, usually between two bridges, an encoder * and a bridge, or a bridge and a connector. * * The bus configuration is stored in &drm_bridge_state separately for the * input and output buses, as seen from the point of view of each bridge. The * bus configuration of a bridge output is usually identical to the * configuration of the next bridge's input, but may differ if the signals are * modified between the two bridges, for instance by an inverter on the board. * The input and output configurations of a bridge may differ if the bridge * modifies the signals internally, for instance by performing format * conversion, or modifying signals polarities. */ struct drm_bus_cfg { /** * @format: format used on this bus (one of the MEDIA_BUS_FMT_* format) * * This field should not be directly modified by drivers * (drm_atomic_bridge_chain_select_bus_fmts() takes care of the bus * format negotiation). */ u32 format; /** * @flags: DRM_BUS_* flags used on this bus */ u32 flags; }; /** * struct drm_bridge_state - Atomic bridge state object */ struct drm_bridge_state { /** * @base: inherit from &drm_private_state */ struct drm_private_state base; /** * @bridge: the bridge this state refers to */ struct drm_bridge *bridge; /** * @input_bus_cfg: input bus configuration */ struct drm_bus_cfg input_bus_cfg; /** * @output_bus_cfg: output bus configuration */ struct drm_bus_cfg output_bus_cfg; }; static inline struct drm_bridge_state * drm_priv_to_bridge_state(struct drm_private_state *priv) { return container_of(priv, struct drm_bridge_state, base); } struct drm_bridge_state * drm_atomic_get_bridge_state(struct drm_atomic_state *state, struct drm_bridge *bridge); struct drm_bridge_state * drm_atomic_get_old_bridge_state(const struct drm_atomic_state *state, struct drm_bridge *bridge); struct drm_bridge_state * drm_atomic_get_new_bridge_state(const struct drm_atomic_state *state, struct drm_bridge *bridge); #endif /* DRM_ATOMIC_H_ */
