/* SPDX-License-Identifier: GPL-2.0 */
#ifndef STICORE_H
#define STICORE_H

struct device;

/* generic STI structures & functions */

#define MAX_STI_ROMS 4          /* max no. of ROMs which this driver handles */

#define STI_REGION_MAX 8        /* hardcoded STI constants */
#define STI_DEV_NAME_LENGTH 32
#define STI_MONITOR_MAX 256

#define STI_FONT_HPROMAN8 1
#define STI_FONT_KANA8 2

#define ALT_CODE_TYPE_UNKNOWN 0x00      /* alt code type values */
#define ALT_CODE_TYPE_PA_RISC_64 0x01

/* The latency of the STI functions cannot really be reduced by setting
 * this to 0;  STI doesn't seem to be designed to allow calling a different
 * function (or the same function with different arguments) after a
 * function exited with 1 as return value.
 *
 * As all of the functions below could be called from interrupt context,
 * we have to spin_lock_irqsave around the do { ret = bla(); } while(ret==1)
 * block.  Really bad latency there.
 *
 * Probably the best solution to all this is have the generic code manage
 * the screen buffer and a kernel thread to call STI occasionally.
 *
 * Luckily, the frame buffer guys have the same problem so we can just wait
 * for them to fix it and steal their solution.   prumpf
 */

#include <asm/io.h>

#define STI_WAIT 1

#define STI_PTR(p)      ( virt_to_phys(p) )

#define sti_onscreen_x(sti) (sti->glob_cfg->onscreen_x)
#define sti_onscreen_y(sti) (sti->glob_cfg->onscreen_y)

/* sti_font_xy() use the native font ROM ! */
#define sti_font_x(sti) (PTR_STI(sti->font)->width)
#define sti_font_y(sti) (PTR_STI(sti->font)->height)

#ifdef CONFIG_64BIT
#define STI_LOWMEM      (GFP_KERNEL | GFP_DMA)
#else
#define STI_LOWMEM      (GFP_KERNEL)
#endif


/* STI function configuration structs */

typedef union region {
        struct {
                u32 offset      : 14;   /* offset in 4kbyte page */
                u32 sys_only    : 1;    /* don't map to user space */
                u32 cache       : 1;    /* map to data cache */
                u32 btlb        : 1;    /* map to block tlb */
                u32 last        : 1;    /* last region in list */
                u32 length      : 14;   /* length in 4kbyte page */
        } region_desc;

        u32 region;                     /* complete region value */
} region_t;

#define REGION_OFFSET_TO_PHYS( rt, hpa ) \
        (((rt).region_desc.offset << 12) + (hpa))

struct sti_glob_cfg_ext {
         u8 curr_mon;                   /* current monitor configured */
         u8 friendly_boot;              /* in friendly boot mode */
        s16 power;                      /* power calculation (in Watts) */
        s32 freq_ref;                   /* frequency reference */
        u32 *sti_mem_addr;              /* pointer to global sti memory (size=sti_mem_request) */
        u32 *future_ptr;                /* pointer to future data */
};

struct sti_glob_cfg {
        s32 text_planes;                /* number of planes used for text */
        s16 onscreen_x;                 /* screen width in pixels */
        s16 onscreen_y;                 /* screen height in pixels */
        s16 offscreen_x;                /* offset width in pixels */
        s16 offscreen_y;                /* offset height in pixels */
        s16 total_x;                    /* frame buffer width in pixels */
        s16 total_y;                    /* frame buffer height in pixels */
        u32 *region_ptrs[STI_REGION_MAX]; /* region pointers */
        s32 reent_lvl;                  /* storage for reentry level value */
        u32 *save_addr;                 /* where to save or restore reentrant state */
        u32 *ext_ptr;                   /* pointer to extended glob_cfg data structure */
};


/* STI init function structs */

struct sti_init_flags {
        u32 wait : 1;           /* should routine idle wait or not */
        u32 reset : 1;          /* hard reset the device? */
        u32 text : 1;           /* turn on text display planes? */
        u32 nontext : 1;        /* turn on non-text display planes? */
        u32 clear : 1;          /* clear text display planes? */
        u32 cmap_blk : 1;       /* non-text planes cmap black? */
        u32 enable_be_timer : 1; /* enable bus error timer */
        u32 enable_be_int : 1;  /* enable bus error timer interrupt */
        u32 no_chg_tx : 1;      /* don't change text settings */
        u32 no_chg_ntx : 1;     /* don't change non-text settings */
        u32 no_chg_bet : 1;     /* don't change berr timer settings */
        u32 no_chg_bei : 1;     /* don't change berr int settings */
        u32 init_cmap_tx : 1;   /* initialize cmap for text planes */
        u32 cmt_chg : 1;        /* change current monitor type */
        u32 retain_ie : 1;      /* don't allow reset to clear int enables */
        u32 caller_bootrom : 1; /* set only by bootrom for each call */
        u32 caller_kernel : 1;  /* set only by kernel for each call */
        u32 caller_other : 1;   /* set only by non-[BR/K] caller */
        u32 pad : 14;           /* pad to word boundary */
        u32 *future_ptr;        /* pointer to future data */
};

struct sti_init_inptr_ext {
        u8  config_mon_type;    /* configure to monitor type */
        u8  pad[1];             /* pad to word boundary */
        u16 inflight_data;      /* inflight data possible on PCI */
        u32 *future_ptr;        /* pointer to future data */
};

struct sti_init_inptr {
        s32 text_planes;        /* number of planes to use for text */
        u32 *ext_ptr;           /* pointer to extended init_graph inptr data structure*/
};


struct sti_init_outptr {
        s32 errno;              /* error number on failure */
        s32 text_planes;        /* number of planes used for text */
        u32 *future_ptr;        /* pointer to future data */
};



/* STI configuration function structs */

struct sti_conf_flags {
        u32 wait : 1;           /* should routine idle wait or not */
        u32 pad : 31;           /* pad to word boundary */
        u32 *future_ptr;        /* pointer to future data */
};

struct sti_conf_inptr {
        u32 *future_ptr;        /* pointer to future data */
};

struct sti_conf_outptr_ext {
        u32 crt_config[3];      /* hardware specific X11/OGL information */
        u32 crt_hdw[3];
        u32 *future_ptr;
};

struct sti_conf_outptr {
        s32 errno;              /* error number on failure */
        s16 onscreen_x;         /* screen width in pixels */
        s16 onscreen_y;         /* screen height in pixels */
        s16 offscreen_x;        /* offscreen width in pixels */
        s16 offscreen_y;        /* offscreen height in pixels */
        s16 total_x;            /* frame buffer width in pixels */
        s16 total_y;            /* frame buffer height in pixels */
        s32 bits_per_pixel;     /* bits/pixel device has configured */
        s32 bits_used;          /* bits which can be accessed */
        s32 planes;             /* number of fb planes in system */
         u8 dev_name[STI_DEV_NAME_LENGTH]; /* null terminated product name */
        u32 attributes;         /* flags denoting attributes */
        u32 *ext_ptr;           /* pointer to future data */
};

struct sti_rom {
         u8 type[4];
         u8 res004;
         u8 num_mons;
         u8 revno[2];
        u32 graphics_id[2];

        u32 font_start;
        u32 statesize;
        u32 last_addr;
        u32 region_list;

        u16 reentsize;
        u16 maxtime;
        u32 mon_tbl_addr;
        u32 user_data_addr;
        u32 sti_mem_req;

        u32 user_data_size;
        u16 power;
         u8 bus_support;
         u8 ext_bus_support;
         u8 alt_code_type;
         u8 ext_dd_struct[3];
        u32 cfb_addr;

        u32 init_graph;
        u32 state_mgmt;
        u32 font_unpmv;
        u32 block_move;
        u32 self_test;
        u32 excep_hdlr;
        u32 inq_conf;
        u32 set_cm_entry;
        u32 dma_ctrl;
         u8 res040[7 * 4];

        u32 init_graph_addr;
        u32 state_mgmt_addr;
        u32 font_unp_addr;
        u32 block_move_addr;
        u32 self_test_addr;
        u32 excep_hdlr_addr;
        u32 inq_conf_addr;
        u32 set_cm_entry_addr;
        u32 image_unpack_addr;
        u32 pa_risx_addrs[7];
};

struct sti_rom_font {
        u16 first_char;
        u16 last_char;
         u8 width;
         u8 height;
         u8 font_type;          /* language type */
         u8 bytes_per_char;
        s32 next_font;          /* note: signed int */
         u8 underline_height;
         u8 underline_pos;
         u8 res008[2];
};

/* sticore internal font handling */

struct sti_cooked_font {
        struct sti_rom_font *raw;       /* native ptr for STI functions */
        void *raw_ptr;                  /* kmalloc'ed font data */
        struct sti_cooked_font *next_font;
        int height, width;
        int refcount;
        u32 crc;
};

struct sti_cooked_rom {
        struct sti_rom *raw;
        struct sti_cooked_font *font_start;
};

/* STI font printing function structs */

struct sti_font_inptr {
        u32 *font_start_addr;   /* address of font start */
        s16 index;              /* index into font table of character */
        u8 fg_color;            /* foreground color of character */
        u8 bg_color;            /* background color of character */
        s16 dest_x;             /* X location of character upper left */
        s16 dest_y;             /* Y location of character upper left */
        u32 *future_ptr;        /* pointer to future data */
};

struct sti_font_flags {
        u32 wait : 1;           /* should routine idle wait or not */
        u32 non_text : 1;       /* font unpack/move in non_text planes =1, text =0 */
        u32 pad : 30;           /* pad to word boundary */
        u32 *future_ptr;        /* pointer to future data */
};

struct sti_font_outptr {
        s32 errno;              /* error number on failure */
        u32 *future_ptr;        /* pointer to future data */
};

/* STI blockmove structs */

struct sti_blkmv_flags {
        u32 wait : 1;           /* should routine idle wait or not */
        u32 color : 1;          /* change color during move? */
        u32 clear : 1;          /* clear during move? */
        u32 non_text : 1;       /* block move in non_text planes =1, text =0 */
        u32 pad : 28;           /* pad to word boundary */
        u32 *future_ptr;        /* pointer to future data */
};

struct sti_blkmv_inptr {
        u8 fg_color;            /* foreground color after move */
        u8 bg_color;            /* background color after move */
        s16 src_x;              /* source upper left pixel x location */
        s16 src_y;              /* source upper left pixel y location */
        s16 dest_x;             /* dest upper left pixel x location */
        s16 dest_y;             /* dest upper left pixel y location */
        s16 width;              /* block width in pixels */
        s16 height;             /* block height in pixels */
        u32 *future_ptr;        /* pointer to future data */
};

struct sti_blkmv_outptr {
        s32 errno;              /* error number on failure */
        u32 *future_ptr;        /* pointer to future data */
};


/* sti_all_data is an internal struct which needs to be allocated in
 * low memory (< 4GB) if STI is used with 32bit STI on a 64bit kernel */

struct sti_all_data {
        struct sti_glob_cfg glob_cfg;
        struct sti_glob_cfg_ext glob_cfg_ext;

        struct sti_conf_inptr           inq_inptr;
        struct sti_conf_outptr          inq_outptr; /* configuration */
        struct sti_conf_outptr_ext      inq_outptr_ext;

        struct sti_init_inptr_ext       init_inptr_ext;
        struct sti_init_inptr           init_inptr;
        struct sti_init_outptr          init_outptr;

        struct sti_blkmv_inptr          blkmv_inptr;
        struct sti_blkmv_outptr         blkmv_outptr;

        struct sti_font_inptr           font_inptr;
        struct sti_font_outptr          font_outptr;

        /* leave as last entries */
        unsigned long save_addr[1024 / sizeof(unsigned long)];
           /* min 256 bytes which is STI default, max sti->sti_mem_request */
        unsigned long sti_mem_addr[256 / sizeof(unsigned long)];
        /* do not add something below here ! */
};

/* internal generic STI struct */

struct sti_struct {
        spinlock_t lock;

        /* char **mon_strings; */
        int sti_mem_request;
        u32 graphics_id[2];

        struct sti_cooked_rom *rom;

        unsigned long font_unpmv;
        unsigned long block_move;
        unsigned long init_graph;
        unsigned long inq_conf;
        int do_call64;                  /* call 64-bit code */

        /* all following fields are initialized by the generic routines */
        int text_planes;
        region_t regions[STI_REGION_MAX];
        unsigned long regions_phys[STI_REGION_MAX];

        struct sti_glob_cfg *glob_cfg;  /* points into sti_all_data */

        int wordmode;
        struct sti_cooked_font *font;   /* ptr to selected font (cooked) */

        struct pci_dev *pd;

        /* PCI data structures (pg. 17ff from sti.pdf) */
        u8 rm_entry[16]; /* pci region mapper array == pci config space offset */

        /* pointer to the parent device */
        struct device *dev;

        /* pointer to all internal data */
        struct sti_all_data *sti_data;

        /* pa_path of this device */
        char pa_path[24];
};


/* sticore interface functions */

struct sti_struct *sti_get_rom(unsigned int index); /* 0: default sti */
void sti_font_convert_bytemode(struct sti_struct *sti, struct sti_cooked_font *f);


/* sticore main function to call STI firmware */

int sti_call(const struct sti_struct *sti, unsigned long func,
                const void *flags, void *inptr, void *outptr,
                struct sti_glob_cfg *glob_cfg);


/* functions to call the STI ROM directly */

void sti_putc(struct sti_struct *sti, int c, int y, int x,
                struct sti_cooked_font *font);
void sti_set(struct sti_struct *sti, int src_y, int src_x,
                int height, int width, u8 color);
void sti_clear(struct sti_struct *sti, int src_y, int src_x,
                int height, int width, int c, struct sti_cooked_font *font);
void sti_bmove(struct sti_struct *sti, int src_y, int src_x,
                int dst_y, int dst_x, int height, int width,
                struct sti_cooked_font *font);

#endif  /* STICORE_H */