/*
 * intc-2.c
 *
 * General interrupt controller code for the many ColdFire cores that use
 * interrupt controllers with 63 interrupt sources, organized as 56 fully-
 * programmable + 7 fixed-level interrupt sources. This includes the 523x
 * family, the 5270, 5271, 5274, 5275, and the 528x family which have two such
 * controllers, and the 547x and 548x families which have only one of them.
 *
 * The external 7 fixed interrupts are part of the Edge Port unit of these
 * ColdFire parts. They can be configured as level or edge triggered.
 *
 * (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file COPYING in the main directory of this archive
 * for more details.
 */

#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/traps.h>

/*
 * Bit definitions for the ICR family of registers.
 */
#define MCFSIM_ICR_LEVEL(l)     ((l)<<3)        /* Level l intr */
#define MCFSIM_ICR_PRI(p)       (p)             /* Priority p intr */

/*
 *      The EDGE Port interrupts are the fixed 7 external interrupts.
 *      They need some special treatment, for example they need to be acked.
 */
#define EINT0   64      /* Is not actually used, but spot reserved for it */
#define EINT1   65      /* EDGE Port interrupt 1 */
#define EINT7   71      /* EDGE Port interrupt 7 */

#ifdef MCFICM_INTC1
#define NR_VECS 128
#else
#define NR_VECS 64
#endif

static void intc_irq_mask(struct irq_data *d)
{
        unsigned int irq = d->irq - MCFINT_VECBASE;
        unsigned long imraddr;
        u32 val, imrbit;

#ifdef MCFICM_INTC1
        imraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
#else
        imraddr = MCFICM_INTC0;
#endif
        imraddr += (irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL;
        imrbit = 0x1 << (irq & 0x1f);

        val = __raw_readl(imraddr);
        __raw_writel(val | imrbit, imraddr);
}

static void intc_irq_unmask(struct irq_data *d)
{
        unsigned int irq = d->irq - MCFINT_VECBASE;
        unsigned long imraddr;
        u32 val, imrbit;

#ifdef MCFICM_INTC1
        imraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
#else
        imraddr = MCFICM_INTC0;
#endif
        imraddr += ((irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL);
        imrbit = 0x1 << (irq & 0x1f);

        /* Don't set the "maskall" bit! */
        if ((irq & 0x20) == 0)
                imrbit |= 0x1;

        val = __raw_readl(imraddr);
        __raw_writel(val & ~imrbit, imraddr);
}

/*
 *      Only the external (or EDGE Port) interrupts need to be acknowledged
 *      here, as part of the IRQ handler. They only really need to be ack'ed
 *      if they are in edge triggered mode, but there is no harm in doing it
 *      for all types.
 */
static void intc_irq_ack(struct irq_data *d)
{
        unsigned int irq = d->irq;

        __raw_writeb(0x1 << (irq - EINT0), MCFEPORT_EPFR);
}

/*
 *      Each vector needs a unique priority and level associated with it.
 *      We don't really care so much what they are, we don't rely on the
 *      traditional priority interrupt scheme of the m68k/ColdFire. This
 *      only needs to be set once for an interrupt, and we will never change
 *      these values once we have set them.
 */
static u8 intc_intpri = MCFSIM_ICR_LEVEL(6) | MCFSIM_ICR_PRI(6);

static unsigned int intc_irq_startup(struct irq_data *d)
{
        unsigned int irq = d->irq - MCFINT_VECBASE;
        unsigned long icraddr;

#ifdef MCFICM_INTC1
        icraddr = (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
#else
        icraddr = MCFICM_INTC0;
#endif
        icraddr += MCFINTC_ICR0 + (irq & 0x3f);
        if (__raw_readb(icraddr) == 0)
                __raw_writeb(intc_intpri--, icraddr);

        irq = d->irq;
        if ((irq >= EINT1) && (irq <= EINT7)) {
                u8 v;

                irq -= EINT0;

                /* Set EPORT line as input */
                v = __raw_readb(MCFEPORT_EPDDR);
                __raw_writeb(v & ~(0x1 << irq), MCFEPORT_EPDDR);

                /* Set EPORT line as interrupt source */
                v = __raw_readb(MCFEPORT_EPIER);
                __raw_writeb(v | (0x1 << irq), MCFEPORT_EPIER);
        }

        intc_irq_unmask(d);
        return 0;
}

static int intc_irq_set_type(struct irq_data *d, unsigned int type)
{
        unsigned int irq = d->irq;
        u16 pa, tb;

        switch (type) {
        case IRQ_TYPE_EDGE_RISING:
                tb = 0x1;
                break;
        case IRQ_TYPE_EDGE_FALLING:
                tb = 0x2;
                break;
        case IRQ_TYPE_EDGE_BOTH:
                tb = 0x3;
                break;
        default:
                /* Level triggered */
                tb = 0;
                break;
        }

        if (tb)
                irq_set_handler(irq, handle_edge_irq);

        irq -= EINT0;
        pa = __raw_readw(MCFEPORT_EPPAR);
        pa = (pa & ~(0x3 << (irq * 2))) | (tb << (irq * 2));
        __raw_writew(pa, MCFEPORT_EPPAR);
        
        return 0;
}

static struct irq_chip intc_irq_chip = {
        .name           = "CF-INTC",
        .irq_startup    = intc_irq_startup,
        .irq_mask       = intc_irq_mask,
        .irq_unmask     = intc_irq_unmask,
};

static struct irq_chip intc_irq_chip_edge_port = {
        .name           = "CF-INTC-EP",
        .irq_startup    = intc_irq_startup,
        .irq_mask       = intc_irq_mask,
        .irq_unmask     = intc_irq_unmask,
        .irq_ack        = intc_irq_ack,
        .irq_set_type   = intc_irq_set_type,
};

void __init init_IRQ(void)
{
        int irq;

        /* Mask all interrupt sources */
        __raw_writel(0x1, MCFICM_INTC0 + MCFINTC_IMRL);
#ifdef MCFICM_INTC1
        __raw_writel(0x1, MCFICM_INTC1 + MCFINTC_IMRL);
#endif

        for (irq = MCFINT_VECBASE; (irq < MCFINT_VECBASE + NR_VECS); irq++) {
                if ((irq >= EINT1) && (irq <=EINT7))
                        irq_set_chip(irq, &intc_irq_chip_edge_port);
                else
                        irq_set_chip(irq, &intc_irq_chip);
                irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
                irq_set_handler(irq, handle_level_irq);
        }
}