// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Copyright (C) 2014 Imagination Technologies
 * Author: Paul Burton <paul.burton@mips.com>
 */

#include <linux/binfmts.h>
#include <linux/elf.h>
#include <linux/export.h>
#include <linux/sched.h>

#include <asm/cpu-features.h>
#include <asm/cpu-info.h>
#include <asm/fpu.h>

#ifdef CONFIG_MIPS_FP_SUPPORT

/* Whether to accept legacy-NaN and 2008-NaN user binaries.  */
bool mips_use_nan_legacy;
bool mips_use_nan_2008;

/* FPU modes */
enum {
        FP_FRE,
        FP_FR0,
        FP_FR1,
};

/**
 * struct mode_req - ABI FPU mode requirements
 * @single:     The program being loaded needs an FPU but it will only issue
 *              single precision instructions meaning that it can execute in
 *              either FR0 or FR1.
 * @soft:       The soft(-float) requirement means that the program being
 *              loaded needs has no FPU dependency at all (i.e. it has no
 *              FPU instructions).
 * @fr1:        The program being loaded depends on FPU being in FR=1 mode.
 * @frdefault:  The program being loaded depends on the default FPU mode.
 *              That is FR0 for O32 and FR1 for N32/N64.
 * @fre:        The program being loaded depends on FPU with FRE=1. This mode is
 *              a bridge which uses FR=1 whilst still being able to maintain
 *              full compatibility with pre-existing code using the O32 FP32
 *              ABI.
 *
 * More information about the FP ABIs can be found here:
 *
 * https://dmz-portal.mips.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking#10.4.1._Basic_mode_set-up
 *
 */

struct mode_req {
        bool single;
        bool soft;
        bool fr1;
        bool frdefault;
        bool fre;
};

static const struct mode_req fpu_reqs[] = {
        [MIPS_ABI_FP_ANY]    = { true,  true,  true,  true,  true  },
        [MIPS_ABI_FP_DOUBLE] = { false, false, false, true,  true  },
        [MIPS_ABI_FP_SINGLE] = { true,  false, false, false, false },
        [MIPS_ABI_FP_SOFT]   = { false, true,  false, false, false },
        [MIPS_ABI_FP_OLD_64] = { false, false, false, false, false },
        [MIPS_ABI_FP_XX]     = { false, false, true,  true,  true  },
        [MIPS_ABI_FP_64]     = { false, false, true,  false, false },
        [MIPS_ABI_FP_64A]    = { false, false, true,  false, true  }
};

/*
 * Mode requirements when .MIPS.abiflags is not present in the ELF.
 * Not present means that everything is acceptable except FR1.
 */
static struct mode_req none_req = { true, true, false, true, true };

int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf,
                     bool is_interp, struct arch_elf_state *state)
{
        union {
                struct elf32_hdr e32;
                struct elf64_hdr e64;
        } *ehdr = _ehdr;
        struct elf32_phdr *phdr32 = _phdr;
        struct elf64_phdr *phdr64 = _phdr;
        struct mips_elf_abiflags_v0 abiflags;
        bool elf32;
        u32 flags;
        int ret;
        loff_t pos;

        elf32 = ehdr->e32.e_ident[EI_CLASS] == ELFCLASS32;
        flags = elf32 ? ehdr->e32.e_flags : ehdr->e64.e_flags;

        /* Let's see if this is an O32 ELF */
        if (elf32) {
                if (flags & EF_MIPS_FP64) {
                        /*
                         * Set MIPS_ABI_FP_OLD_64 for EF_MIPS_FP64. We will override it
                         * later if needed
                         */
                        if (is_interp)
                                state->interp_fp_abi = MIPS_ABI_FP_OLD_64;
                        else
                                state->fp_abi = MIPS_ABI_FP_OLD_64;
                }
                if (phdr32->p_type != PT_MIPS_ABIFLAGS)
                        return 0;

                if (phdr32->p_filesz < sizeof(abiflags))
                        return -EINVAL;
                pos = phdr32->p_offset;
        } else {
                if (phdr64->p_type != PT_MIPS_ABIFLAGS)
                        return 0;
                if (phdr64->p_filesz < sizeof(abiflags))
                        return -EINVAL;
                pos = phdr64->p_offset;
        }

        ret = kernel_read(elf, &abiflags, sizeof(abiflags), &pos);
        if (ret < 0)
                return ret;
        if (ret != sizeof(abiflags))
                return -EIO;

        /* Record the required FP ABIs for use by mips_check_elf */
        if (is_interp)
                state->interp_fp_abi = abiflags.fp_abi;
        else
                state->fp_abi = abiflags.fp_abi;

        return 0;
}

int arch_check_elf(void *_ehdr, bool has_interpreter, void *_interp_ehdr,
                   struct arch_elf_state *state)
{
        union {
                struct elf32_hdr e32;
                struct elf64_hdr e64;
        } *ehdr = _ehdr;
        union {
                struct elf32_hdr e32;
                struct elf64_hdr e64;
        } *iehdr = _interp_ehdr;
        struct mode_req prog_req, interp_req;
        int fp_abi, interp_fp_abi, abi0, abi1, max_abi;
        bool elf32;
        u32 flags;

        elf32 = ehdr->e32.e_ident[EI_CLASS] == ELFCLASS32;
        flags = elf32 ? ehdr->e32.e_flags : ehdr->e64.e_flags;

        /*
         * Determine the NaN personality, reject the binary if not allowed.
         * Also ensure that any interpreter matches the executable.
         */
        if (flags & EF_MIPS_NAN2008) {
                if (mips_use_nan_2008)
                        state->nan_2008 = 1;
                else
                        return -ENOEXEC;
        } else {
                if (mips_use_nan_legacy)
                        state->nan_2008 = 0;
                else
                        return -ENOEXEC;
        }
        if (has_interpreter) {
                bool ielf32;
                u32 iflags;

                ielf32 = iehdr->e32.e_ident[EI_CLASS] == ELFCLASS32;
                iflags = ielf32 ? iehdr->e32.e_flags : iehdr->e64.e_flags;

                if ((flags ^ iflags) & EF_MIPS_NAN2008)
                        return -ELIBBAD;
        }

        if (!IS_ENABLED(CONFIG_MIPS_O32_FP64_SUPPORT))
                return 0;

        fp_abi = state->fp_abi;

        if (has_interpreter) {
                interp_fp_abi = state->interp_fp_abi;

                abi0 = min(fp_abi, interp_fp_abi);
                abi1 = max(fp_abi, interp_fp_abi);
        } else {
                abi0 = abi1 = fp_abi;
        }

        if (elf32 && !(flags & EF_MIPS_ABI2)) {
                /* Default to a mode capable of running code expecting FR=0 */
                state->overall_fp_mode = cpu_has_mips_r6 ? FP_FRE : FP_FR0;

                /* Allow all ABIs we know about */
                max_abi = MIPS_ABI_FP_64A;
        } else {
                /* MIPS64 code always uses FR=1, thus the default is easy */
                state->overall_fp_mode = FP_FR1;

                /* Disallow access to the various FPXX & FP64 ABIs */
                max_abi = MIPS_ABI_FP_SOFT;
        }

        if ((abi0 > max_abi && abi0 != MIPS_ABI_FP_UNKNOWN) ||
            (abi1 > max_abi && abi1 != MIPS_ABI_FP_UNKNOWN))
                return -ELIBBAD;

        /* It's time to determine the FPU mode requirements */
        prog_req = (abi0 == MIPS_ABI_FP_UNKNOWN) ? none_req : fpu_reqs[abi0];
        interp_req = (abi1 == MIPS_ABI_FP_UNKNOWN) ? none_req : fpu_reqs[abi1];

        /*
         * Check whether the program's and interp's ABIs have a matching FPU
         * mode requirement.
         */
        prog_req.single = interp_req.single && prog_req.single;
        prog_req.soft = interp_req.soft && prog_req.soft;
        prog_req.fr1 = interp_req.fr1 && prog_req.fr1;
        prog_req.frdefault = interp_req.frdefault && prog_req.frdefault;
        prog_req.fre = interp_req.fre && prog_req.fre;

        /*
         * Determine the desired FPU mode
         *
         * Decision making:
         *
         * - We want FR_FRE if FRE=1 and both FR=1 and FR=0 are false. This
         *   means that we have a combination of program and interpreter
         *   that inherently require the hybrid FP mode.
         * - If FR1 and FRDEFAULT is true, that means we hit the any-abi or
         *   fpxx case. This is because, in any-ABI (or no-ABI) we have no FPU
         *   instructions so we don't care about the mode. We will simply use
         *   the one preferred by the hardware. In fpxx case, that ABI can
         *   handle both FR=1 and FR=0, so, again, we simply choose the one
         *   preferred by the hardware. Next, if we only use single-precision
         *   FPU instructions, and the default ABI FPU mode is not good
         *   (ie single + any ABI combination), we set again the FPU mode to the
         *   one is preferred by the hardware. Next, if we know that the code
         *   will only use single-precision instructions, shown by single being
         *   true but frdefault being false, then we again set the FPU mode to
         *   the one that is preferred by the hardware.
         * - We want FP_FR1 if that's the only matching mode and the default one
         *   is not good.
         * - Return with -ELIBADD if we can't find a matching FPU mode.
         */
        if (prog_req.fre && !prog_req.frdefault && !prog_req.fr1)
                state->overall_fp_mode = FP_FRE;
        else if ((prog_req.fr1 && prog_req.frdefault) ||
                 (prog_req.single && !prog_req.frdefault))
                /* Make sure 64-bit MIPS III/IV/64R1 will not pick FR1 */
                state->overall_fp_mode = ((raw_current_cpu_data.fpu_id & MIPS_FPIR_F64) &&
                                          cpu_has_mips_r2_r6) ?
                                          FP_FR1 : FP_FR0;
        else if (prog_req.fr1)
                state->overall_fp_mode = FP_FR1;
        else  if (!prog_req.fre && !prog_req.frdefault &&
                  !prog_req.fr1 && !prog_req.single && !prog_req.soft)
                return -ELIBBAD;

        return 0;
}

static inline void set_thread_fp_mode(int hybrid, int regs32)
{
        if (hybrid)
                set_thread_flag(TIF_HYBRID_FPREGS);
        else
                clear_thread_flag(TIF_HYBRID_FPREGS);
        if (regs32)
                set_thread_flag(TIF_32BIT_FPREGS);
        else
                clear_thread_flag(TIF_32BIT_FPREGS);
}

void mips_set_personality_fp(struct arch_elf_state *state)
{
        /*
         * This function is only ever called for O32 ELFs so we should
         * not be worried about N32/N64 binaries.
         */

        if (!IS_ENABLED(CONFIG_MIPS_O32_FP64_SUPPORT))
                return;

        switch (state->overall_fp_mode) {
        case FP_FRE:
                set_thread_fp_mode(1, 0);
                break;
        case FP_FR0:
                set_thread_fp_mode(0, 1);
                break;
        case FP_FR1:
                set_thread_fp_mode(0, 0);
                break;
        default:
                BUG();
        }
}

/*
 * Select the IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode
 * in FCSR according to the ELF NaN personality.
 */
void mips_set_personality_nan(struct arch_elf_state *state)
{
        struct cpuinfo_mips *c = &boot_cpu_data;
        struct task_struct *t = current;

        /* Do this early so t->thread.fpu.fcr31 won't be clobbered in case
         * we are preempted before the lose_fpu(0) in start_thread.
         */
        lose_fpu(0);

        t->thread.fpu.fcr31 = c->fpu_csr31;
        switch (state->nan_2008) {
        case 0:
                if (!(c->fpu_msk31 & FPU_CSR_NAN2008))
                        t->thread.fpu.fcr31 &= ~FPU_CSR_NAN2008;
                if (!(c->fpu_msk31 & FPU_CSR_ABS2008))
                        t->thread.fpu.fcr31 &= ~FPU_CSR_ABS2008;
                break;
        case 1:
                if (!(c->fpu_msk31 & FPU_CSR_NAN2008))
                        t->thread.fpu.fcr31 |= FPU_CSR_NAN2008;
                if (!(c->fpu_msk31 & FPU_CSR_ABS2008))
                        t->thread.fpu.fcr31 |= FPU_CSR_ABS2008;
                break;
        default:
                BUG();
        }
}

#endif /* CONFIG_MIPS_FP_SUPPORT */

int mips_elf_read_implies_exec(void *elf_ex, int exstack)
{
        /*
         * Set READ_IMPLIES_EXEC only on non-NX systems that
         * do not request a specific state via PT_GNU_STACK.
         */
        return (!cpu_has_rixi && exstack == EXSTACK_DEFAULT);
}
EXPORT_SYMBOL(mips_elf_read_implies_exec);