/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
 */
#ifndef __ASM_SN_INTR_H
#define __ASM_SN_INTR_H

/*
 * Macros to manipulate the interrupt register on the calling hub chip.
 */

#define LOCAL_HUB_SEND_INTR(level)                              \
        LOCAL_HUB_S(PI_INT_PEND_MOD, (0x100 | (level)))
#define REMOTE_HUB_SEND_INTR(hub, level)                        \
        REMOTE_HUB_S((hub), PI_INT_PEND_MOD, (0x100 | (level)))

/*
 * When clearing the interrupt, make sure this clear does make it
 * to the hub. Otherwise we could end up losing interrupts.
 * We do an uncached load of the int_pend0 register to ensure this.
 */

#define LOCAL_HUB_CLR_INTR(level)                               \
do {                                                            \
        LOCAL_HUB_S(PI_INT_PEND_MOD, (level));                  \
        LOCAL_HUB_L(PI_INT_PEND0);                              \
} while (0);

#define REMOTE_HUB_CLR_INTR(hub, level)                         \
do {                                                            \
        nasid_t  __hub = (hub);                                 \
                                                                \
        REMOTE_HUB_S(__hub, PI_INT_PEND_MOD, (level));          \
        REMOTE_HUB_L(__hub, PI_INT_PEND0);                      \
} while (0);

/*
 * Hard-coded interrupt levels:
 */

/*
 *      L0 = SW1
 *      L1 = SW2
 *      L2 = INT_PEND0
 *      L3 = INT_PEND1
 *      L4 = RTC
 *      L5 = Profiling Timer
 *      L6 = Hub Errors
 *      L7 = Count/Compare (T5 counters)
 */


/*
 * INT_PEND0 hard-coded bits.
 */

/*
 * INT_PEND0 bits determined by hardware:
 */
#define RESERVED_INTR            0      /* What is this bit? */
#define GFX_INTR_A               1
#define GFX_INTR_B               2
#define PG_MIG_INTR              3
#define UART_INTR                4
#define CC_PEND_A                5
#define CC_PEND_B                6

/*
 * INT_PEND0 used by the kernel for itself ...
 */
#define CPU_RESCHED_A_IRQ        7
#define CPU_RESCHED_B_IRQ        8
#define CPU_CALL_A_IRQ           9
#define CPU_CALL_B_IRQ          10

/*
 * INT_PEND1 hard-coded bits:
 */
#define NI_BRDCAST_ERR_A        39
#define NI_BRDCAST_ERR_B        40

#define LLP_PFAIL_INTR_A        41      /* see ml/SN/SN0/sysctlr.c */
#define LLP_PFAIL_INTR_B        42

#define TLB_INTR_A              43      /* used for tlb flush random */
#define TLB_INTR_B              44

#define IP27_INTR_0             45      /* Reserved for PROM use */
#define IP27_INTR_1             46      /* do not use in Kernel */
#define IP27_INTR_2             47
#define IP27_INTR_3             48
#define IP27_INTR_4             49
#define IP27_INTR_5             50
#define IP27_INTR_6             51
#define IP27_INTR_7             52

#define BRIDGE_ERROR_INTR       53      /* Setup by PROM to catch       */
                                        /* Bridge Errors */
#define DEBUG_INTR_A            54
#define DEBUG_INTR_B            55      /* Used by symmon to stop all cpus */
#define IO_ERROR_INTR           57      /* Setup by PROM */
#define CLK_ERR_INTR            58
#define COR_ERR_INTR_A          59
#define COR_ERR_INTR_B          60
#define MD_COR_ERR_INTR         61
#define NI_ERROR_INTR           62
#define MSC_PANIC_INTR          63

#endif /* __ASM_SN_INTR_H */