root/arch/mips/include/uapi/asm/termbits.h
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1995, 96, 99, 2001, 06 Ralf Baechle
 * Copyright (C) 1999 Silicon Graphics, Inc.
 * Copyright (C) 2001 MIPS Technologies, Inc.
 */
#ifndef _ASM_TERMBITS_H
#define _ASM_TERMBITS_H

#include <asm-generic/termbits-common.h>

typedef unsigned int    tcflag_t;

/*
 * The ABI says nothing about NCC but seems to use NCCS as
 * replacement for it in struct termio
 */
#define NCCS    23
struct termios {
        tcflag_t c_iflag;               /* input mode flags */
        tcflag_t c_oflag;               /* output mode flags */
        tcflag_t c_cflag;               /* control mode flags */
        tcflag_t c_lflag;               /* local mode flags */
        cc_t c_line;                    /* line discipline */
        cc_t c_cc[NCCS];                /* control characters */
};

struct termios2 {
        tcflag_t c_iflag;               /* input mode flags */
        tcflag_t c_oflag;               /* output mode flags */
        tcflag_t c_cflag;               /* control mode flags */
        tcflag_t c_lflag;               /* local mode flags */
        cc_t c_line;                    /* line discipline */
        cc_t c_cc[NCCS];                /* control characters */
        speed_t c_ispeed;               /* input speed */
        speed_t c_ospeed;               /* output speed */
};

struct ktermios {
        tcflag_t c_iflag;               /* input mode flags */
        tcflag_t c_oflag;               /* output mode flags */
        tcflag_t c_cflag;               /* control mode flags */
        tcflag_t c_lflag;               /* local mode flags */
        cc_t c_line;                    /* line discipline */
        cc_t c_cc[NCCS];                /* control characters */
        speed_t c_ispeed;               /* input speed */
        speed_t c_ospeed;               /* output speed */
};

/* c_cc characters */
#define VINTR            0              /* Interrupt character [ISIG] */
#define VQUIT            1              /* Quit character [ISIG] */
#define VERASE           2              /* Erase character [ICANON] */
#define VKILL            3              /* Kill-line character [ICANON] */
#define VMIN             4              /* Minimum number of bytes read at once [!ICANON] */
#define VTIME            5              /* Time-out value (tenths of a second) [!ICANON] */
#define VEOL2            6              /* Second EOL character [ICANON] */
#define VSWTC            7              /* ??? */
#define VSWTCH          VSWTC
#define VSTART           8              /* Start (X-ON) character [IXON, IXOFF] */
#define VSTOP            9              /* Stop (X-OFF) character [IXON, IXOFF] */
#define VSUSP           10              /* Suspend character [ISIG] */
#if 0
/*
 * VDSUSP is not supported
 */
#define VDSUSP          11              /* Delayed suspend character [ISIG] */
#endif
#define VREPRINT        12              /* Reprint-line character [ICANON] */
#define VDISCARD        13              /* Discard character [IEXTEN] */
#define VWERASE         14              /* Word-erase character [ICANON] */
#define VLNEXT          15              /* Literal-next character [IEXTEN] */
#define VEOF            16              /* End-of-file character [ICANON] */
#define VEOL            17              /* End-of-line character [ICANON] */

/* c_iflag bits */
#define IUCLC   0x0200          /* Map upper case to lower case on input */
#define IXON    0x0400          /* Enable start/stop output control */
#define IXOFF   0x1000          /* Enable start/stop input control */
#define IMAXBEL 0x2000          /* Ring bell when input queue is full */
#define IUTF8   0x4000          /* Input is UTF-8 */

/* c_oflag bits */
#define OLCUC   0x00002         /* Map lower case to upper case on output */
#define ONLCR   0x00004         /* Map NL to CR-NL on output */
#define NLDLY   0x00100
#define   NL0   0x00000
#define   NL1   0x00100
#define CRDLY   0x00600
#define   CR0   0x00000
#define   CR1   0x00200
#define   CR2   0x00400
#define   CR3   0x00600
#define TABDLY  0x01800
#define   TAB0  0x00000
#define   TAB1  0x00800
#define   TAB2  0x01000
#define   TAB3  0x01800
#define   XTABS 0x01800
#define BSDLY   0x02000
#define   BS0   0x00000
#define   BS1   0x02000
#define VTDLY   0x04000
#define   VT0   0x00000
#define   VT1   0x04000
#define FFDLY   0x08000
#define   FF0   0x00000
#define   FF1   0x08000
/*
#define PAGEOUT ???
#define WRAP    ???
 */

/* c_cflag bit meaning */
#define CBAUD           0x0000100f
#define CSIZE           0x00000030      /* Number of bits per byte (mask) */
#define   CS5           0x00000000      /* 5 bits per byte */
#define   CS6           0x00000010      /* 6 bits per byte */
#define   CS7           0x00000020      /* 7 bits per byte */
#define   CS8           0x00000030      /* 8 bits per byte */
#define CSTOPB          0x00000040      /* Two stop bits instead of one */
#define CREAD           0x00000080      /* Enable receiver */
#define PARENB          0x00000100      /* Parity enable */
#define PARODD          0x00000200      /* Odd parity instead of even */
#define HUPCL           0x00000400      /* Hang up on last close */
#define CLOCAL          0x00000800      /* Ignore modem status lines */
#define CBAUDEX         0x00001000
#define BOTHER          0x00001000
#define     B57600      0x00001001
#define    B115200      0x00001002
#define    B230400      0x00001003
#define    B460800      0x00001004
#define    B500000      0x00001005
#define    B576000      0x00001006
#define    B921600      0x00001007
#define   B1000000      0x00001008
#define   B1152000      0x00001009
#define   B1500000      0x0000100a
#define   B2000000      0x0000100b
#define   B2500000      0x0000100c
#define   B3000000      0x0000100d
#define   B3500000      0x0000100e
#define   B4000000      0x0000100f
#define CIBAUD          0x100f0000      /* input baud rate */

/* c_lflag bits */
#define ISIG    0x00001         /* Enable signals */
#define ICANON  0x00002         /* Do erase and kill processing */
#define XCASE   0x00004
#define ECHO    0x00008         /* Enable echo */
#define ECHOE   0x00010         /* Visual erase for ERASE */
#define ECHOK   0x00020         /* Echo NL after KILL */
#define ECHONL  0x00040         /* Echo NL even if ECHO is off */
#define NOFLSH  0x00080         /* Disable flush after interrupt */
#define IEXTEN  0x00100         /* Enable DISCARD and LNEXT */
#define ECHOCTL 0x00200         /* Echo control characters as ^X */
#define ECHOPRT 0x00400         /* Hardcopy visual erase */
#define ECHOKE  0x00800         /* Visual erase for KILL */
#define FLUSHO  0x02000
#define PENDIN  0x04000         /* Retype pending input (state) */
#define TOSTOP  0x08000         /* Send SIGTTOU for background output */
#define ITOSTOP TOSTOP
#define EXTPROC 0x10000         /* External processing on pty */

/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
#define TIOCSER_TEMT    0x01    /* Transmitter physically empty */

/* tcsetattr uses these */
#define TCSANOW         TCSETS  /* Change immediately */
#define TCSADRAIN       TCSETSW /* Change when pending output is written */
#define TCSAFLUSH       TCSETSF /* Flush pending input before changing */

#endif /* _ASM_TERMBITS_H */