// SPDX-License-Identifier: GPL-2.0-only
/*
 * arch/arm/mach-dove/cm-a510.c
 *
 * Copyright (C) 2010 CompuLab, Ltd.
 * Konstantin Sinyuk <kostyas@compulab.co.il>
 *
 * Based on Marvell DB-MV88AP510-BP Development Board Setup
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>

#include "dove.h"
#include "common.h"

static struct mv643xx_eth_platform_data cm_a510_ge00_data = {
        .phy_addr       = MV643XX_ETH_PHY_ADDR_DEFAULT,
};

static struct mv_sata_platform_data cm_a510_sata_data = {
        .n_ports        = 1,
};

/*
 * SPI Devices:
 * SPI0: 1M Flash Winbond w25q32bv
 */
static const struct flash_platform_data cm_a510_spi_flash_data = {
        .type           = "w25q32bv",
};

static struct spi_board_info __initdata cm_a510_spi_flash_info[] = {
        {
                .modalias       = "m25p80",
                .platform_data  = &cm_a510_spi_flash_data,
                .irq            = -1,
                .max_speed_hz   = 20000000,
                .bus_num        = 0,
                .chip_select    = 0,
        },
};

static int __init cm_a510_pci_init(void)
{
        if (machine_is_cm_a510())
                dove_pcie_init(1, 1);

        return 0;
}

subsys_initcall(cm_a510_pci_init);

/* Board Init */
static void __init cm_a510_init(void)
{
        /*
         * Basic Dove setup. Needs to be called early.
         */
        dove_init();

        dove_ge00_init(&cm_a510_ge00_data);
        dove_ehci0_init();
        dove_ehci1_init();
        dove_sata_init(&cm_a510_sata_data);
        dove_sdio0_init();
        dove_sdio1_init();
        dove_spi0_init();
        dove_spi1_init();
        dove_uart0_init();
        dove_uart1_init();
        dove_i2c_init();
        spi_register_board_info(cm_a510_spi_flash_info,
                                ARRAY_SIZE(cm_a510_spi_flash_info));
}

MACHINE_START(CM_A510, "Compulab CM-A510 Board")
        .atag_offset    = 0x100,
        .nr_irqs        = DOVE_NR_IRQS,
        .init_machine   = cm_a510_init,
        .map_io         = dove_map_io,
        .init_early     = dove_init_early,
        .init_irq       = dove_init_irq,
        .init_time      = dove_timer_init,
        .restart        = dove_restart,
MACHINE_END