/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright 2004-2007, 2014 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de */ #ifndef __ASM_ARCH_MXC_HARDWARE_H__ #define __ASM_ARCH_MXC_HARDWARE_H__ #ifndef __ASSEMBLY__ #include <asm/io.h> #include <soc/imx/revision.h> #endif #include <linux/sizes.h> #define addr_in_module(addr, mod) \ ((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE) #define IMX_IO_P2V_MODULE(addr, module) \ (((addr) - module ## _BASE_ADDR) < module ## _SIZE ? \ (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0) /* * This is rather complicated for humans and ugly to verify, but for a machine * it's OK. Still more as it is usually only applied to constants. The upsides * on using this approach are: * * - same mapping on all i.MX machines * - works for assembler, too * - no need to nurture #defines for virtual addresses * * The downside it, it's hard to verify (but I have a script for that). * * Obviously this needs to be injective for each SoC. In general it maps the * whole address space to [0xf4000000, 0xf5ffffff]. So [0xf6000000,0xfeffffff] * is free for per-machine use (e.g. KZM_ARM11_01 uses 64MiB there). * * It applies the following mappings for the different SoCs: * * mx1: * IO 0x00200000+0x100000 -> 0xf4000000+0x100000 * mx21: * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000 * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000 * X_MEMC 0xdf000000+0x004000 -> 0xf5f00000+0x004000 * mx25: * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 * mx27: * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000 * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000 * X_MEMC 0xd8000000+0x100000 -> 0xf5c00000+0x100000 * mx31: * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000 * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 * mx35: * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000 * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000 * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 * mx51: * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000 * IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000 * DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000 * SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000 * AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000 * AIPS2 0x83f00000+0x100000 -> 0xf5300000+0x100000 * mx53: * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000 * DEBUG 0x40000000+0x100000 -> 0xf5000000+0x100000 * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 * AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000 * AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000 * mx6q: * SCU 0x00a00000+0x004000 -> 0xf4000000+0x004000 * CCM 0x020c4000+0x004000 -> 0xf42c4000+0x004000 * ANATOP 0x020c8000+0x004000 -> 0xf42c8000+0x004000 * UART4 0x021f0000+0x004000 -> 0xf42f0000+0x004000 */ #define IMX_IO_P2V(x) ( \ (((x) & 0x80000000) >> 7) | \ (0xf4000000 + \ (((x) & 0x50000000) >> 6) + \ (((x) & 0x0b000000) >> 4) + \ (((x) & 0x000fffff)))) #define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x)) #include "mxc.h" #include "mx3x.h" #include "mx31.h" #include "mx35.h" #include "mx2x.h" #include "mx27.h" #define imx_map_entry(soc, name, _type) { \ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \ .length = soc ## _ ## name ## _SIZE, \ .type = _type, \ } #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
